User property from realm in ADF form or in BPM variables

I want use the user property of realm to set BPM variable (for example set variable name with the corrisponding user property of the realm)
or ADF component (for example insert e-mail in af:inputText)
Someone can tell me where there is specific documentation.
Thanks
Elena

Well, I explain you
I have a BPM process, I set all roles of process with users of the realm.
In the process, when the document changed the state, I must send the message ( via my web service) at the user of the role. I want set the e-mail of the user automaticaly, read this information of the user properties in the realm.
In the process I have some human tasks and I have some forms. In this forms I want set automaticaly some components: "Creator" with the name of user that is using the form, "user of role" a selectOneChoese with the users of role, "e-Mail" the address e-mail of the user stored in the user properties of realm, and so on.
I want to take this information from the user properties stored in the realm
Thanks Elena

Similar Messages

Read user groups from realm. Admin rights to each user ??

Greetings to ALL,
I am reading users, groups from realm. If I give the user admin priviliges I am
able to get the information else I get the error weblogic.management.NoAccessRuntimeException:
Access not allowed for subject: principals=[ruser1, B10AP01, B10MP01, B10MP03A,
B10MP03], on ResourceType: Security:Name=myrealmDefaultAuthenticator Action: execute,
Target: listGroups
Is there more effective way to read the information.
I can execute the program standalone ( from DOS PROMPT) and read all information
if I do the following
adminHome = (MBeanHome) Helper.getAdminMBeanHome (username,password,url);
But when calling from the application I get the above error.
Any code, suggestion will be very helpful.
Fred

"Fred Boon" <[email protected]> wrote in message
news:3fa7cb98$[email protected]..
>
Greetings to ALL,
I am reading users, groups from realm. If I give the user admin priviligesI am
able to get the information else I get the errorweblogic.management.NoAccessRuntimeException:
Access not allowed for subject: principals=[ruser1, B10AP01, B10MP01,
B10MP03A,> B10MP03, on ResourceType: Security:Name=myrealmDefaultAuthenticatorAction: execute,
Target: listGroups
Is there more effective way to read the information.
Commo mbeans require admin role in order to be able to invoke methods.
I can execute the program standalone ( from DOS PROMPT) and read allinformation
if I do the following
adminHome = (MBeanHome) Helper.getAdminMBeanHome (username,password,url);
But when calling from the application I get the above error.
Try doing a runAs with a subject that has admin role.

ADF forms based on BPM human tasks - Invoking webservices/view objects.

Hi All,
Is anyone aware of whether the following is a valid implementation that has been carried out before.
1. ADF forms based on BPM 11G human tasks.
2.The ADF forms invoke webservices via Webservice data controls. It is pertinent to note that the webservice bring back complex data types. We've tried writing a few forms, resulting in data benig brought back, but not being able to print them to the screen.
3. The ADF forms also use View Object based on sql to bring back tables of data. If view objects are embedded within the forms, the applciation gives rise to a null pointer exception.
Considering the form will be invoked via a BPM worklist entry, is there a setting or configuration we should consider before hand. Is this feasible, is there knowledge of this being done commercially.
Any examples or information regarding the same will be immensely helpful.
Thanks and Regards,
Preethi.
NB : I have posted this in the BPM forum as well as I feel it is relevant to both BPM and ADF.

Hi Joonas.
Plese let me explain me better for your understanding
A big summary for what I meant it's the following:
1- In the procces you made, when you add the HT activity, you have to implement it, this means declare the input(s) parameters you want. This implementation create the .task file.
2- Create an application, and projects as HT you have. Each poject are based on the .task file, and automatically create a Data Control (for each project based on a .task) with all you need.
This w'll be an empty application, so you can customize it all you want. The task selected should have all the parameters previously defined. Those parameters can change if you want.
2- Create a page(s) in the task flow for the task implementation. You can even split the the payload of the task in differents pages, create your custom pages and any logic you need.
3- An important aspect is how to match these application with the HT implemented in the process. It's possible, it's a configuration en the Enterprise Manager.
4- Deploy your application
All these are explain in the book I mentioned
Th book you can find it here:
https://blogs.oracle.com/soacommunity/entry/oracle_soa_suite_11g_handbook_1
Regards Dariel.
PS: Please, let me know if you need more details.

Retrieving ALL values from a single restricted user property

How can I retrieve ALL values of a single restricted user property from within
a .jpf file?
I want to display a dropdown list within a form in a JSP which should contain
all the locations listed in the property 'locations'. I ever get just the default
value when I access the property via
ProfileWrapper pw = userprofile.getProfileForUser(user);
Object prop = pw.getProperty("ClockSetup", "Locations");

Well, the code you've got will retrieve the single value of the property
for the current user. You're getting the default value because the
current user doesn't have Locations property set, so the ProfileWrapper
returns the default value from the property set.
I assume you want to get the list of available values that you entered
into the .usr file in Workshop. If so, I've attached a
SetColorController.jpf, index.jsp, and GeneralInfo.usr (put in
META-INF/data/userprofiles) I wrote for an example that does just this.
It uses the PropertySetManagerControl to retrieve the restricted values
for a property, and the jsp uses data-binding to create a list from that
pageflow method.
For a just-jsps solution, you can also use the
<ps:getRestrictedPropertyValues/> tag. I've attached a setcolor-tags.jsp
that does the same thing.
Greg
Dirk wrote:
How can I retrieve ALL values of a single restricted user property from within
a .jpf file?
I want to display a dropdown list within a form in a JSP which should contain
all the locations listed in the property 'locations'. I ever get just the default
value when I access the property via
ProfileWrapper pw = userprofile.getProfileForUser(user);
Object prop = pw.getProperty("ClockSetup", "Locations");
[att1.html]
package users.setcolor;
import com.bea.p13n.controls.exceptions.P13nControlException;
import com.bea.p13n.property.PropertyDefinition;
import com.bea.p13n.property.PropertySet;
import com.bea.p13n.usermgmt.profile.ProfileWrapper;
import com.bea.wlw.netui.pageflow.FormData;
import com.bea.wlw.netui.pageflow.Forward;
import com.bea.wlw.netui.pageflow.PageFlowController;
import java.util.Collection;
import java.util.Iterator;
* @jpf:controller
* @jpf:view-properties view-properties::
* 
* <view-properties>
* <pageflow-object id="pageflow:/users/setcolor/SetColorController.jpf"/>
* <pageflow-object id="action:begin.do">
* <property value="80" name="x"/>
* <property value="100" name="y"/>
* </pageflow-object>
* <pageflow-object id="action:setColor.do#users.setcolor.SetColorController.ColorFormBean">
* <property value="240" name="x"/>
* <property value="220" name="y"/>
* </pageflow-object>
* <pageflow-object id="action-call:@page:index.jsp@#@action:setColor.do#users.setcolor.SetColorController.ColorFormBean@">
* <property value="240,240,240,240" name="elbowsX"/>
* <property value="144,160,160,176" name="elbowsY"/>
* <property value="South_1" name="fromPort"/>
* <property value="North_1" name="toPort"/>
* </pageflow-object>
* <pageflow-object id="page:index.jsp">
* <property value="240" name="x"/>
* <property value="100" name="y"/>
* </pageflow-object>
* <pageflow-object id="forward:path#success#index.jsp#@action:begin.do@">
* <property value="116,160,160,204" name="elbowsX"/>
* <property value="92,92,92,92" name="elbowsY"/>
* <property value="East_1" name="fromPort"/>
* <property value="West_1" name="toPort"/>
* <property value="success" name="label"/>
* </pageflow-object>
* <pageflow-object id="forward:path#success#begin.do#@action:setColor.do#users.setcolor.SetColorController.ColorFormBean@">
* <property value="204,160,160,116" name="elbowsX"/>
* <property value="201,201,103,103" name="elbowsY"/>
* <property value="West_0" name="fromPort"/>
* <property value="East_2" name="toPort"/>
* <property value="success" name="label"/>
* </pageflow-object>
* <pageflow-object id="control:com.bea.p13n.controls.ejb.property.PropertySetManager#propSetMgr">
* <property value="31" name="x"/>
* <property value="34" name="y"/>
* </pageflow-object>
* <pageflow-object id="control:com.bea.p13n.controls.profile.UserProfileControl#profileControl">
* <property value="37" name="x"/>
* <property value="34" name="y"/>
* </pageflow-object>
* <pageflow-object id="formbeanprop:users.setcolor.SetColorController.ColorFormBean#color#java.lang.String"/>
* <pageflow-object id="formbean:users.setcolor.SetColorController.ColorFormBean"/>
* </view-properties>
public class SetColorController extends PageFlowController
* @common:control
private com.bea.p13n.controls.ejb.property.PropertySetManager propSetMgr;
* @common:control
private com.bea.p13n.controls.profile.UserProfileControl profileControl;
/** Cached possible colors from the User Profile Property Set definition.
private String[] possibleColors = null;
/** Get the possible colors, based upon the User Profile Property Set.
public String[] getPossibleColors()
if (possibleColors != null)
return possibleColors;
try
PropertySet ps = propSetMgr.getPropertySet("USER", "GeneralInfo");
PropertyDefinition pd = ps.getPropertyDefinition("FavoriteColor");
Collection l = pd.getRestrictedValues();
String[] s = new String[l.size()];
Iterator it = l.iterator();
for (int i = 0; it.hasNext(); i++)
s[i] = it.next().toString();
possibleColors = s;
catch (P13nControlException ex)
ex.printStackTrace();
possibleColors = new String[0];
return possibleColors;
/** Get the user's favorite color from their profile.
public String getUsersColor()
try
ProfileWrapper profile = profileControl.getProfileFromRequest(getRequest());
return profileControl.getProperty(profile, "GeneralInfo", "FavoriteColor").toString();
catch (P13nControlException ex)
ex.printStackTrace();
return null;
// Uncomment this declaration to access Global.app.
// protected global.Global globalApp;
// For an example of page flow exception handling see the example "catch" and "exception-handler"
// annotations in {project}/WEB-INF/src/global/Global.app
* This method represents the point of entry into the pageflow
* @jpf:action
* @jpf:forward name="success" path="index.jsp"
protected Forward begin()
return new Forward("success");
* @jpf:action
* @jpf:forward name="success" path="begin.do"
protected Forward setColor(ColorFormBean form)
// set the color in the user's profile
try
ProfileWrapper profile = profileControl.getProfileFromRequest(getRequest());
profileControl.setProperty(profile, "GeneralInfo", "FavoriteColor", form.getColor());
catch (P13nControlException ex)
ex.printStackTrace();
return new Forward("success");
* FormData get and set methods may be overwritten by the Form Bean editor.
public static class ColorFormBean extends FormData
private String color;
public void setColor(String color)
this.color = color;
public String getColor()
return this.color;
[GeneralInfo.usr]
[att1.html]

How to add a new user property and then retrieve it from a portlet

Trying to add a user property and then retrieve it form a remote web service?
Add a user property and map it
1. Create a property2. Go to Global Object Property Map3. Go to users, edit and select the new property.4. Go to User Profile Manager5. For portlets, go to the "Position Information" section and add it. (for the purpose of this test, add it to the profile section as well)6. Under the "User Profile Manager" go to the "User Information - Property Map" step in the wizard and 7. Go to the "User Information Attribute" and add the property.8. Click on the pencil to the right of it and give it a name (The name is what's going to appear in the list of user information under the portlet web service)9. Click finish10. Now create/edit the web service for the portlet from which you want to displays user properties. 11. Under the "User Information", click "add existing user Info" and select the property you want.12. From the portal toolbar, edit the user profile under "My Account" and then "Edit user Profile" and give the new property a value. 13. Test code below: ================================in C# IPortletContext context = PortletContextFactory.CreatePortletContext(Request,Response);IPortletRequest portletRequest = context.GetRequest();System.Collections.IDictionary UserInfoVariables = portletRequest.GetSettingCollection(SettingType.UserInfo);System.Collections.IDictionaryEnumerator UserInfo = UserInfoVariables.GetEnumerator();
while(UserInfo.MoveNext()){ //to display in a listbox ListBox1.ClearSelection(); ListBox1.Items.Add(UserInfo.Key.ToString() + ": " + UserInfo.Value);}===========================in ASP: <%Dim objSettings, dUserInfo, sEmpIDSet objSettings = Server.CreateObject("GSServices.Settings") ' get the user info settings, get employee ID from user infoSet dUserInfo = objSettings.GetUserInfoSettings
for each item in dUserInfo response.Write "<BR>" & item & ": " & dUserInfo(item)next%>

IPortletContext portletContext = PortletContextFactory.createPortletContext(req, res);
IPortletRequest portletReq = portletContext.getRequest();
String value = portletReq.getSettingValue(SettingType.Portlet,settingName);

How to Handle Automatic Skip Property of Item in Oracle Forms through Custom.pll or from other methods

Hi All,
How to Handle Automatic Skip Property of Item in Oracle Forms through Custom.pll or from other methods.
This is a enhancement requirement.
When ever user enter value in field 1 then automatically cursor should go to next field.

Hello Bobb,
You can create a trigger(when-list-changed) for each list item where you could:
1.recreate the record groups and then use POPULATE_LIST so you can hide the selected values. In forms builder online help there are some good examples about create record groups dynamically.
or
2.you can perform a validation instead of hiding the selected values. If the values is already selected the display a message 'Value already selected....'
Second option is much faster(only an 'if clause')
Hope this helps.
Regards,
Alex

Issue while reflecting the data to ADF form from ADF Table

Hi All,
I have one scenario as follows:
I have to open a form in entry mode. So I have used a Method Call activity in task flow to call "Create" in method call activity.
Then form opens in a entry mode. I have a adf table in the page showing the entered data.
When form opens in entry mode, instead of entering the values in the field User selects a record in ADF table, but due to the create mode of the form it will through me a error to fill mandatory fields.
Please tell me the way so that if user selects the record(in adf table) instead of entering new record, the value would reflect in the Adf form.
If I use a roll back on selecting the row of ADF table, then it is showing me this error "Row currency has changed since the user interface was rendered. The expected row key was oracle.jbo.Key[null ]" because there will be no row key in the cache when form opens.
Please suggest me the way to complete the task.
I am using jdeveloper 11.1.2.1.0
Thanks,
Gobi
Edited by: gobinkl on Oct 3, 2012 2:06 AM

no no your are complicating yourself. :) better your should provide your usecase.
first thing: go through the books & also adf blogs learn and understand the framework. as above person said.
i hope that you had method call create as activity as default while page rendering it make your af: form empty(that is ready fir insertion format).
so if your are doing like that.am sure it will throw some mandatory errors.
error will not resolve unless without entering any data's.
coming af:table why are using af:table - immediate = true / false(switching).
immediate = true - skip over validation or by pass some validation in some phase - based on the component which you are using. (say as if you are using editable value holder,af:coomand button).
grab the information here in an more legible manner.
http://adfpractice-fedor.blogspot.in/2012/02/understanding-immediate-attribute.html
let me know your usecase.
this will assist you
https://blogs.oracle.com/shay/entry/executing_an_action_on_jsf_pag
http://tanveeroracle.blogspot.in/2009/09/adf-11g-createinsert-to-display-blank.html
Edited by: user707 on Oct 5, 2012 9:02 AM

How to change user password from default realm programaticaly

Hello,
I would like to know if there are any ways to change a users password from a file
realm through java classes ie . programaticaly.

Thank you for the support.
After looking at the code, I noticed RealmManager is not documented in the BEA
Javadocs. Am I missing something or is it not documented. Lot of other methods
also not documented. Do you have the latest Javadocs?
Thanks
John
"Tom Moreau" <[email protected]> wrote:
>
See message #4589 - it posts the code magic needed
to change the password. The caller doesn't have to
be aware of which realm is being used - that's taken
care of for you.
-Tom
"John M" <[email protected]> wrote:
Hello,
I would like to know if there are any ways to change a users passwordfrom
a file
realm through java classes ie . programaticaly.

How to use different mail address in "from" and "user" property?

I'd like to use the user enter mail address as the "from" property and use my mail account to send it, but I got error: com.sun.mail.smtp.SMTPSendFailedException: 553 You are not authorized to send mail, authentication is required when set different mail address in "from" and "user" property, how to resolve this problem?

Basically that's a bad idea. Suppose you used your server to send messages that claimed to come from "[email protected]"? Naturally enough people have tried that, either as a joke or as an attempt at fraud, so that servers will check to see if the message is coming from the server it claims to be coming from. And if it isn't -- as in that example -- it will consider it a forgery. Best case (for you) is that the server will flag it as spam or junk. Worst case is that your server will be blacklisted and other servers will ignore it.

How to read User ID from the request Form and pre populating in the AD User process form before provisioning

I am trying to read the user Id from the submitted AD User request form( Catalogue AD User form. I need User Id,firstname and lastname inorder to prepopulate the common name as in this format - lastname,firstname (userid) for the user to be provisioned in Active Directory.
So after filling the AD User request form with User Id and Organization and submitting the request, I am trying to
prepopulate the common name in the process form before the provisioning.
The prepopulate adopter for the common name is configured to read the firstname, lastname and userid. firstname and
lastname variables are mapped to User definition and user Id is mapped to Process Data. In this setup I am not getting the
User Id value from process data, it is empty.
Is this a bug with OIM 11g R2 or I need to do it differently in order to read the user Id that user has entered in the
request form for populating the common name?
Thanks

Ghulam Yassen wrote:
How to get USER_ID and IP_AddressWhy exactly do you need this data and what do you plan to do with it?
The data is not reliable and trustworthy. IP addresses can easily be spoofed (a few seconds if you know what to do and how to do it). Also, IP addresses are not static. Users also do not use the same network device to access the database - different devices will have different IP addresses.
The o/s user on the client is supplied by the client driver. This can also be spoofed.
The user can also use a virtualised device - which means that recording the IP and o/s user seen from the server side, is pretty much useless and meaningless.
So if this data is intended to be used for auditing for example - it would be pretty suspect data to use for that purpose.

Can I use Visual Basic to covert form user data from multiple .pdf files to a single .csv file?

Can I use Visual Basic to covert form user data from multiple .pdf files to a single .csv file? If so, how?

You can automate Acrobat using IAC (InterApplication Communications), as documented in the Acrobat SDK. Your program could loop through a collection of PDFs, load them in Acrobat, extract the form data from each, and generate a CSV file that contains the data.
Acrobat can also do this with its "Merge Data Files into Spreadsheet" function, but this is a manual process.

How to get the user logged at worklist (Adf Form - Human Task)

Hi,
I have an Adf Form Based on Human Task and and need to get the user logged at Worklist Application.
Anyone know to make this ?
Thanks.
Victor Jabur

Hi, thanks for your reply, but i discover a better way to make this:
public String getLoggedUserWorklist(){
String user = "";
try{
Map parameters=AdfFacesContext.getCurrentInstance().getPageFlowScope();
IWorkflowServiceClient wfSvcClient = WorkflowService.getWorkflowServiceClient();
ITaskQueryService queryService = wfSvcClient.getTaskQueryService();
String contextId = (String)parameters.get("bpmWorklistContext");
IWorkflowContext context = queryService.getWorkflowContext(contextId);
user = context.getUser();
}catch(Exception e){
user = "";
return user;
}

Shortcut to find a property from property pallate in oracle 10G forms

Hi,
I want to know the the shortcut to find a property from property pallete in oracle 10G form builder.
Because i cannot use mouse due to blindness. Please tell shortcut to locate a property from property pallete.
Qasim Javaid Malik

Hi,
Yes, the keys I mentioned open Property Palette.
I have no clue about short-cuts for properties in an open palette.
The Up and Down arrow keys work will you enter a LoV, and I could not figure out key strokes to come out of the LoV !
Maybe someone else has some idea of this.
Cheers,
PS: I was trying on 11g R1 as I do not have 10g any more.
Edited by: Prabodh on Sep 14, 2012 2:53 PM

Need access to the user view from a form

How can I get access (only need read access) to the user view from inside a form, in this case, the Question Login Form?

This is mentioned in the forum somewhere:
<invoke name='getView'>
<ref>:display.session</ref>
<concat>
<s>User:</s>
<ref>accountId</ref>
</concat>
<map>
<s>authorized</s>
<s>true</s>
</map>
</invoke>
regards,
Manish Gurnani

Call a adf form from oracle forms 11g

Hallo,
I want to call a form developed in ADF from my existing oracle forms mask and then back from ADF form to the oracle forms mask.
It this possible? Have everyone a how to for this problem?
Thanks for your help
Ines

i created jar file to call it from forms
Could you be a little bit less vague about what you exactly did?
Anyway; see here http://bit.ly/10VVoMR
cheers

User property from realm in ADF form or in BPM variables

Similar Messages

Maybe you are looking for