User through scp to restricted directory

Hi,
I have configured some zones. Now, for one zone, I want to have a user webadmin which can do nothing but adding/deleting/modifying files/dirs under /var/opt/SUNWappserver/domains/domain1/docroot.
I created the user. Can someone explain me what to do next in order to make this happen?
My zones are under /export/zones
Thanks,
tim

Thx,
I don't understand completely but will dig in it if necessary (don't understand I would then even add a privilege to the user, since the user has 'too much' access already)
I was thinking about something like chroot. I tried running this script (http://www.fuschlberger.net/programs/ssh-scp-chroot-jail/) which I understand, but I get a lot of errors running the script on a Solaris zone:
-bash-3.00# ./make_chroot_jail.sh webman /var/opt/SUNWappserver/domains/domain1/docroot
-n Checking for chroot...
OK
-n Checking for sudo.....
OK
./make_chroot_jail.sh: !: not found
./make_chroot_jail.sh: !: not found
Creating /bin/chroot-shell
Creating /home/jail
Creating /home/jail/dev
Creating /home/jail/etc
Creating /home/jail/etc/pam.d
Creating /home/jail/bin
Creating /home/jail/home
Creating /home/jail/sbin
Creating /home/jail/usr
Creating /home/jail/usr/bin
mknod: Not owner
mknod: Not owner
mknod: Not owner
mknod: Not owner
Modifying /etc/sudoers
Adding User "webman" to system
64 blocks
New Password:
Re-enter new Password:
passwd: password successfully changed for webman
grep: can't open -e
grep: can't open ^root
grep: can't open -e
grep: can't open ^root
grep: can't open -e
grep: can't open ^users
Adding User webman to jail
grep: illegal option -- e
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- e
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- e
Usage: grep -hblcnsviw pattern file . . .
Copying necessary library-files to jail (may take some time)
./make_chroot_jail.sh: !: not found
./make_chroot_jail.sh: /root/ldlist: cannot create
./make_chroot_jail.sh: !: not found
./make_chroot_jail.sh: /root/ldlist: cannot create
./make_chroot_jail.sh: !: not found
./make_chroot_jail.sh: /root/ldlist: cannot create
./make_chroot_jail.sh: !: not found
./make_chroot_jail.sh: /root/ldlist: cannot create
./make_chroot_jail.sh: !: not found
./make_chroot_jail.sh: /root/ldlist: cannot create
./make_chroot_jail.sh: !: not found
./make_chroot_jail.sh: /root/ldlist: cannot create
./make_chroot_jail.sh: !: not found
./make_chroot_jail.sh: /root/ldlist: cannot create
./make_chroot_jail.sh: !: not found
./make_chroot_jail.sh: /root/ldlist: cannot create
./make_chroot_jail.sh: !: not found
./make_chroot_jail.sh: /root/ldlist: cannot create
./make_chroot_jail.sh: !: not found
./make_chroot_jail.sh: /root/ldlist: cannot create
./make_chroot_jail.sh: !: not found
./make_chroot_jail.sh: /root/ldlist: cannot create
./make_chroot_jail.sh: !: not found
./make_chroot_jail.sh: /root/ldlist: cannot create
./make_chroot_jail.sh: !: not found
./make_chroot_jail.sh: /root/ldlist: cannot create
./make_chroot_jail.sh: !: not found
cp: cannot create ./usr/lib/ssh/sftp-server: No such file or directory
./make_chroot_jail.sh: /root/ldlist: cannot create
./make_chroot_jail.sh: test: argument expected
If there is no script like the link has available for Solaris, I'll try to dig in your approach.

Similar Messages

Add a posixaccount user in posixgroup in sun directory server using java

Hi
Anybody now how to add posixaccount user in posixgroup in sun directory server using java code.
I am able to add normal directory server user in ldap group in java.
But i am getting any luck to add posixaccount user in posixgroup.
I know we can set uid value in memberuid attribute but how to add through java program.
Anybody can paste code for that.
Thanks.

To CRabel,
My company have restriction on using the open sources product/code, but i will take a look on netscape ldap sdk as a reference~
To raghu1978 ,
i find a product call Directory Editor 1 2005Q1, I hope it is useful.
thz all~

Problem in provisioning user from oim to active directory using ssl

hi,
problem in provisioning user from oim to active directory using ssl i am getting following error while provisioning user to AD.
15:18:12,984 ERROR [ADCS] Communication Errorsimple bind failed: 172.16.30.35:636
15:18:12,984 ERROR [ADCS] The error occured in tcADUtilLDAPController::connectTo
AvailableAD():simple bind failed: 172.16.30.35:636
15:18:13,015 ERROR [SERVER] Class/Method: tcProperties/tcProperties encounter so
me problems: Must set a query before executing
com.thortech.xl.dataaccess.tcDataSetException: Must set a query before executing
at com.thortech.xl.dataaccess.tcDataSet.checkExecute(Unknown Source)
at com.thortech.xl.dataaccess.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.dataobj.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.dataaccess.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.dataobj.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.dataobj.util.tcProperties.<init>(Unknown Source)
at com.thortech.xl.dataobj.util.tcProperties.initialize(Unknown Source)
at Thor.API.tcUtilityFactory.getLocalUtility(Unknown Source)
at Thor.API.tcUtilityFactory.getUtility(Unknown Source)
at com.thortech.xl.integration.ActiveDirectory.tcADUtilLDAPController.co
nnectToAvailableNextAD(Unknown Source)
at com.thortech.xl.integration.ActiveDirectory.tcADUtilLDAPController.se
archResultPageEnum(Unknown Source)
at com.thortech.xl.schedule.tasks.ADLookupRecon.performReconciliation(Un
known Source)
at com.thortech.xl.schedule.tasks.ADLookupReconTask.execute(Unknown Sour
ce)
at com.thortech.xl.scheduler.tasks.SchedulerBaseTask.run(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper$TaskExecutionActi
on.run(Unknown Source)
at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown S
ource)
at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.j
ava:520)
can any one help.
Thanks and Regards,
praveen,

Are you able to connect to AD over SSL through some LDAP Browser ?
Check the validity of Certificate ?
Does your certificate appear in the list ?

Pulling "cn=Users" account data from Active Directory issue

I'm using the following general syntax:
ldapsearch -h <active directory server> -p 389 -D "CN=Administrator,CN=Users,dc=ORACLE,dc=COM" -b "DC=ORACLE,DC=COM" -s base objectclass=*
What I get is only "cn=System" output. Any ideas to get the "cn=Users" data?? I can authenticate users in other ways using the Oracle LDAP tools through the same "active directory server". So it's not a matter of it not existing in the Active Directory Server. Also, there is no password right now for the "Administrator" account; so it's not a matter of including/excluding the "-w" option.
Any suggestions??
Thanks.

I recommend you to post this here:
Forums Home » Oracle Technology Network (OTN) » Products » Application Server » Oracle Internet Directory
Identity Manager
Joel Pérez
http://otn.oracle.com/experts

How To Create User through Pl SQL Block

Want to create user from pl sql block using dynamic SQl. Used dbms_sql package . But when I run the block it does not recognises the parameter v7 which is a constant in dbms_sql package. Message displayed is Can not access parameter from package being restricted procedure.
Is there any method to create user through PL SQl block

hi ranjit,
hope this will work
declare
uname varchar2(30):=&uname;
pword varchar2(30):=&pword;
begin
execute immediate ('grant connect, resource to '| |uname| |' identified by '| |pword);
end;
regards

URGENT: issue while creating user through reconciliation of AD

Hi,
We have a requirement where we need to create users in IDM through reconcilition against Active Directory. For certain type of account Ids I want to trigger a custom workflow used for user creation. So I set "viewOptions.Process" to my custom workflow in the user form assigned to the admin who is the proxy admin for the reconcilaition process. But it doesn't seem to kick off my custom workflow. Will this work? Is this the correct form to specify the custom workflow to be triggered?
Also I tried putting some trace satements in the default "Create User" workflow to see that if it is being called during user creation by recon. In the logs I don't see my trace statements. So the question is: Which is the workflow that is called when a user is created through reconciliation? How to specify a custom workflow name in this regard?
Thanks,
kIDMan.

I'm wondering if you have an answer to this?
I need to do a similar thing. For me, I reconcile against an oracle DB and there are Active and Inactive users. I only want to reconcile Active users. I put the following code in the user form but it still created Inactive users. "Exclude Inactive User" is an empty WF that has only start and end activities.
<Field name='viewOptions.Process'>
<Expansion>
<s>Exclude Inactive User</s>
</Expansion>
<Disable>
<neq>
<ref>global.status</ref>
<s>I</s>
</neq>
</Disable>
</Field>

Restric user Through Business Partner

Is there is any way in Solution manager to restrict a User through Business Partner.
Ex:
Company group name A has two company B & C(Both are on SAP ). Now I need to block Company B User to Viewing the Company C user Transaction data....through Business Partner . We are Using CHARM here for Transport.
Please help
regards
Vish

any solution.......please let know for any clarification

Error: "LDAP Synch status is enabled. Cannot add users through BAT."

In 10.x it looks like Cisco has disallowed user imports (via BAT) into LDAP-integrated systems. Has anyone else run into this? Below is the error I'm receiving in the Job Status log file. The error implies that "it's a feature, not a bug". How are large companies supposed to import new phones/users when they open new branches or do a phone refresh? Breaking LDAP to do the import isn't a option because you have to blow away your LDAP directory config to do so - not to mention people wouldn't be able to log into Jabber or their user pages while it was broken. I'm hoping someone has a workaround or has already spoken with TAC about this.
Failure Details :
Device Name/User ID Error Code Error Description
LDAP Synch status is enabled. Cannot add users through BAT.
Result Summary :
INSERT for 0 PHONES passed.
INSERT for 5 PHONES failed.
INSERT for 0 USERS passed.
INSERT for 5 USERS failed.

So if a company has a large CUCM deployment and adds another branch (let's say 100 phones/users), I would have to go user by user and do the phone associations, profile associations, primary extensions, etc 100 times?
Is there a better way that I'm missing? That just doesn't seem logical. In previous versions (I'm not sure about 6.x in the link. I started with 7.x) I could have sworn that I could import from BAT even if LDAP was integrated. I would get an error and only the non-LDAP fields would get changed, but the changes, associations, etc. would still go through.

How to register new users through lotus domino administrator

how to register new users through lotus domino administrator

Hello Rahul,
could you be more precise: Where do you want to register users?
There are two options:
(1) you want to simultaneously create users in Domino and in the SAP EP portal database: then you should prepare the users in text files.
(1a) one for the EP users:
http://help.sap.com/saphelp_nw04/helpdata/en/52/96f03eae11e16be10000000a114084/frameset.htm
(1b) one for the Domino users:
http://www-10.lotus.com/ldd/today.nsf/0/e586b1de8c52125a852568d2004c1b50?OpenDocument#Migration%20and%20text%20file%20import
then you can use those files in the Domino/EP user administration for batch user creation.
(2) you want to use users stored in the Domino directory in SAP Enterprise Portal via LDAP: please read the thread in the SAP-IBM interoperability forum: Interoperability IBM where this question is alredy answered.
Regards
Michael

ALV output converted into PDF format and send that PDF to user through mail

Hi Experts,
I have report earlier its output was in alv grid.
Now i want that ALV output converted into PDF format.And that PDF output send to user through mail.
Can u please tell how to do?
My code is here(output is displaying in ALV grid).
INCLUDE <icon>.
TYPE-POOLS: slis, kkblo.
TABLES : zmsd_freight_hdr, zmsd_freight_det, zmsd_blinfo, zmsd_diheader.
TABLES : lfa1.
DATA : t_hdr   LIKE   zmsd_freight_hdr   OCCURS 0 WITH HEADER LINE,
       T_DET   LIKE   ZMSD_FREIGHT_DET   OCCURS 0 WITH HEADER LINE,
       t_bl    LIKE   zmsd_blinfo        OCCURS 0 WITH HEADER LINE,
       t_di    LIKE   zmsd_diheader      OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF t_det OCCURS 0.
        INCLUDE STRUCTURE zmsd_freight_det.
DATA    type(30).
DATA: END OF t_det.
DATA: v_target2(30),
      v_zsammg LIKE t_det-zsammg,
      v_gsttotal LIKE t_det-zamount.
DATA : BEGIN OF t_data OCCURS 0,
         zsammg       LIKE zmsd_freight_hdr-zsammg,
         zdidbl       LIKE zmsd_freight_hdr-zdidbl,
         zvkorg       LIKE zmsd_freight_hdr-zvkorg,
         zinvno       LIKE zmsd_freight_hdr-zinvno,
         zttlamt      LIKE zmsd_freight_hdr-zttlamt,
         zstatus      LIKE zmsd_freight_hdr-zstatus,
         ztype        LIKE zmsd_freight_hdr-ztype,
         zconfirm     LIKE zmsd_freight_hdr-zconfirm,
         zconfirmdate LIKE zmsd_freight_hdr-zconfirmdate,
         erdat        LIKE zmsd_freight_hdr-erdat,
         ernam        LIKE zmsd_freight_hdr-ernam,
         erzet        LIKE zmsd_freight_hdr-erzet,
         aedat(10),
         aenam        LIKE zmsd_freight_hdr-aenam,
         aezet        LIKE zmsd_freight_hdr-aezet,
         zline        LIKE zmsd_freight_det-zline,
         zfptype      LIKE zmsd_freight_det-zfptype,
         zchrcode     LIKE zmsd_freight_det-zchrcode,
         zcurcode     LIKE zmsd_freight_det-zcurcode,
         zqty         LIKE zmsd_freight_det-zqty,
         zuom         LIKE zmsd_freight_det-zuom,
         zrate        LIKE zmsd_freight_det-zrate,
         zamount      LIKE zmsd_freight_det-zamount,
         zexrate      LIKE zmsd_freight_det-zexrate,
       zccode       LIKE zmsd_blinfo-zccode,      "MADK991565
         zccode       like ZMSD_FREIGHT_HDR-zfcode, "MADK991565
         zbldate(10),
         zbl          LIKE zmsd_blinfo-zbl,
         type(3),
         waerk        LIKE zmsd_freight_det-zcurcode,
         zamountl     LIKE zmsd_freight_det-zamount,
       END OF t_data.
DATA : w_layout      TYPE   slis_layout_alv,
       w_catalog     TYPE   slis_fieldcat_alv,
       t_catalog     TYPE   slis_t_fieldcat_alv,
       w_sort        TYPE   slis_sortinfo_alv,
       t_sort        TYPE   slis_t_sortinfo_alv.
DATA   V_ZINVNO    like   T_HDR-ZINVNO.                   "MADK991565
DATA : v_count TYPE i.
SELECTION-SCREEN BEGIN OF BLOCK a0 WITH FRAME TITLE text-001.
PARAMETERS     : p_zvkorg LIKE zmsd_freight_hdr-zvkorg OBLIGATORY .
SELECT-OPTIONS : s_zdidbl FOR zmsd_freight_hdr-zdidbl             ,
                  s_zccode FOR lfa1-lifnr                          ,
                  s_status FOR zmsd_freight_hdr-zstatus            ,
                  s_ztype FOR zmsd_freight_hdr-ztype              ,
                  s_erdat FOR zmsd_freight_hdr-erdat              ,
                  s_ernam FOR zmsd_freight_hdr-ernam              ,
                  s_zconfd FOR zmsd_freight_hdr-zconfirmdate       .
PARAMETERS     : p_zconf AS   CHECKBOX                            .
SELECTION-SCREEN END OF BLOCK a0.
SELECTION-SCREEN BEGIN OF BLOCK a1 WITH FRAME TITLE text-002.
PARAMETERS     : p_hdr    RADIOBUTTON GROUP rad DEFAULT 'X'        ,
                  p_det    RADIOBUTTON GROUP rad                    .
SELECTION-SCREEN END OF BLOCK a1.
INITIALIZATION.
AT SELECTION-SCREEN.
START-OF-SELECTION.
PERFORM get_data.
PERFORM process.
PERFORM display.
END-OF-SELECTION.
PERFORM fm_get_num_pages.
AT USER-COMMAND.
AT LINE-SELECTION.
TOP-OF-PAGE.
PERFORM fm_top_of_page USING '7010' sy-title space.
FORM get_data.
SELECT   *
    FROM   zmsd_freight_hdr
    INTO   TABLE t_hdr
   WHERE   zvkorg        EQ p_zvkorg
     AND   zdidbl        IN s_zdidbl
     AND   zstatus       IN s_status
     AND   ztype         IN s_ztype
     AND   erdat         IN s_erdat
     AND   ernam         IN s_ernam
     AND   zconfirmdate IN s_zconfd
     AND   ZFCODE        IN S_ZCCODE.                      "MADK991565
IF p_zconf = 'X'.
    DELETE t_hdr WHERE zconfirm NE 'C'.
ENDIF.
CHECK NOT t_hdr[] IS INITIAL.
SELECT   *
    FROM   zmsd_blinfo
    INTO   TABLE t_bl
     FOR   ALL ENTRIES IN t_hdr
   WHERE   zsammg = t_hdr-zsammg.
SORT t_bl BY zsammg.
SELECT   *
    FROM   zmsd_diheader
    INTO   TABLE t_di
     FOR   ALL ENTRIES IN t_hdr
   WHERE   zsammg = t_hdr-zsammg.
SORT t_di BY zsammg.
IF P_DET = 'X'. "MADK933361
SELECT   *
    FROM   zmsd_freight_det
    INTO   TABLE t_det
     FOR   ALL ENTRIES IN t_hdr
   WHERE   zsammg = t_hdr-zsammg
   AND ZINVNO = T_HDR-ZINVNO .                           "MADK991565
SORT t_det BY zsammg zline.                            "MADK991565
   SORT T_DET BY ZSAMMG ZINVNO ZLINE.                     "MADK991565
ENDIF. "MADK933361
ENDFORM.
FORM process.
REFRESH t_data.
CLEAR v_gsttotal.                                         "MADK933361
LOOP AT t_hdr.
Start of MADK933361
    CLEAR: v_target2.
    v_zsammg = t_hdr-zsammg.
    V_ZINVNO = T_HDR-ZINVNO.                                "MADK991565
   AT NEW zsammg.                                         "MADK991565
     AT NEW ZINVNO.                                         "MADK991565
      PERFORM get_gst_value.
    ENDAT.
End of MADK933361
    PERFORM move_header.
    CHECK t_data-zccode IN s_zccode.
    IF p_det = 'X'.
CSF Project Changes Starts   DEV34    MADK985782
    LOOP AT T_DET WHERE ZSAMMG = T_HDR-ZSAMMG..
      LOOP AT t_det WHERE zsammg = t_hdr-zsammg AND
                          zinvno = t_hdr-zinvno.
CSF Project Changes Ends     DEV34    MADK985782
        PERFORM move_header.
        CHECK t_data-zccode IN s_zccode.
        MOVE-CORRESPONDING t_det TO t_data.
        t_data-zamountl = t_data-zamount * t_data-zexrate.
        APPEND t_data.
        CLEAR t_data.
      ENDLOOP.
    ELSE.
      APPEND t_data.
      CLEAR t_data.
    ENDIF.
    AT END OF zsammg.
      CLEAR v_gsttotal.
    ENDAT.
*Start of changes for IS090901289-PIA MADK991565
    AT END OF ZINVNO.
      CLEAR V_GSTTOTAL.
    ENDAT.
*End of changes for IS090901289-PIA MADK991565
ENDLOOP.
ENDFORM.
FORM move_header.
MOVE-CORRESPONDING t_hdr TO t_data.
t_data-zttlamt = t_data-zttlamt + v_gsttotal.             "MADK933361
t_data-waerk = 'SGD'.
IF NOT t_hdr-aedat IS INITIAL.
    WRITE: t_hdr-aedat TO t_data-aedat.
ELSE.
    CLEAR : t_data-aedat.
ENDIF.
READ TABLE t_bl WITH KEY zsammg = t_hdr-zsammg BINARY SEARCH.
IF sy-subrc EQ 0.
t_data-zccode = t_bl-zccode.   "MADK991565
    T_DATA-ZCCODE = T_HDR-ZFCODE.   "MADK991565
    IF NOT t_bl-zbldate IS INITIAL.
      WRITE: t_bl-zbldate TO t_data-zbldate.
    ENDIF.
    t_data-zbl     = t_bl-zbl.
    t_data-type    = 'DBL'.
ELSE.
    READ TABLE t_di WITH KEY zsammg = t_hdr-zsammg BINARY SEARCH.
    IF sy-subrc EQ 0.
    t_data-zccode = t_di-zdiforcode.     "MADK991565
      T_DATA-ZCCODE = T_HDR-ZFCODE.         "MADK991565
      t_data-type    = 'DI'.
    ENDIF.
ENDIF.
ENDFORM.
FORM display.
IF t_data[] IS INITIAL.
    MESSAGE s398(00) WITH 'No Data Selected'.
    EXIT.
ENDIF.
DATA : l_repid LIKE sy-repid.
l_repid = sy-repid.
REFRESH t_catalog.
CLEAR   t_catalog.
w_layout-cell_merge = 'X'.
PERFORM map_fields.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
            i_callback_program      = l_repid
            i_callback_user_command = 'ALV_USER_COMMAND'
            is_layout               = w_layout
            it_fieldcat             = t_catalog[]
            i_grid_title            = sy-title
            i_save                  = 'A'
            it_sort                 = t_sort[]
       TABLES
            t_outtab                = t_data
       EXCEPTIONS
            program_error           = 1
            OTHERS                  = 2.
IF sy-subrc <> 0.
ENDIF.
ENDFORM.
FORM map_fields.
Sort Order
CLEAR v_count.
PERFORM sf USING 'ZDIDBL'   'X' 'X'.
Fields to be displayed
CLEAR v_count.
IF p_hdr = 'X'.
    PERFORM af USING :
   DESCRIPTION       FIELD        LEN   RTABLE             RFIELD
    'DI/DBL         ' 'ZDIDBL'     '14' '                ' '        ',
    'Type           ' 'TYPE'       '04' '                ' '        ',
    'Forwarder Code ' 'ZCCODE'     '14' '                ' '        ',
    'BL Number      ' 'ZBL'        '14' '                ' '        ',
    'BL Date        ' 'ZBLDATE'    '10' '                ' '        ',
    'Invoice Number ' 'ZINVNO'     '15' '                ' '        ',
    'Extraction     ' 'ZSTATUS'    '05' 'ZMSD_FREIGHT_HDR' 'ZSTATUS ',
    'Freight Type   ' 'ZTYPE'      '05' 'ZMSD_FREIGHT_HDR' 'ZTYPE   ',
    'Confirmation   ' 'ZCONFIRM'   '05' 'ZMSD_FREIGHT_HDR' 'ZCONFIRM',
    'Confirm Date   ' 'ZCONFIRMDATE' '10' 'ZMSD_FREIGHT_HDR'
'ZCONFIRMDATE',
    'Total Amount   ' 'ZTTLAMT'    '18' '                ' '        ',
    'Created On     ' 'ERDAT'      '10' '                ' '        ',
    'Created By     ' 'ERNAM'      '10' '                ' '        ',
    'Changed On     ' 'AEDAT'      '10' '                ' '        ',
    'Changed By     ' 'AENAM'      '10' '                ' '        '.
ELSE.
    PERFORM af USING :
   DESCRIPTION         FIELD     LEN   RTABLE             RFIELD
    'DI/DBL           ' 'ZDIDBL'   '14' '                ' '        ',
    'Type             ' 'TYPE'     '04' '                ' '        ',
    'Forwarder Code   ' 'ZCCODE'   '14' '                ' '        ',
    'BL Number        ' 'ZBL'      '14' '                ' '        ',
    'BL Date          ' 'ZBLDATE' '10' '                ' '        ',
    'Invoice Number   ' 'ZINVNO'   '15' '                ' '        ',
    'Extraction       ' 'ZSTATUS' '05' 'ZMSD_FREIGHT_HDR' 'ZSTATUS ',
    'Freight Type     ' 'ZTYPE'    '05' 'ZMSD_FREIGHT_HDR' 'ZTYPE   ',
    'Confirmation     ' 'ZCONFIRM' '05' 'ZMSD_FREIGHT_HDR' 'ZCONFIRM',
    'Confirm Date     ' 'ZCONFIRMDATE' '10' 'ZMSD_FREIGHT_HDR'
'ZCONFIRMDATE',
    'Total Amount     ' 'ZTTLAMT' '18' '                ' '        ',
    'Freight Payment ' 'ZFPTYPE' '14' '                ' '        ',
    'Charge Code      ' 'ZCHRCODE' '10' '                ' '        ',
    'Currency         ' 'ZCURCODE' '08' '                ' '        ',
    'Quantity         ' 'ZQTY'     '13' '                ' '        ',
    'UoM              ' 'ZUOM'     '04' '                ' '        ',
    'Rate             ' 'ZRATE'    '15' '                ' '        ',
    'Amt(Foreign Curr)' 'ZAMOUNT' '16' '                ' '        ',
    'Exchange Rate    ' 'ZEXRATE' '13' '                ' '        ',
    'Amt(Local Curr) ' 'ZAMOUNTL' '16' '                ' '        ',
    'Created On       ' 'ERDAT'    '10' '                ' '        ',
    'Created By       ' 'ERNAM'    '10' '                ' '        ',
    'Changed On       ' 'AEDAT'    '10' '                ' '        ',
    'Changed By       ' 'AENAM'    '10' '                ' '        '.
ENDIF.
ENDFORM.
FORM af USING text
              field
              len
              table
              reffield.
v_count = v_count + 1.
w_catalog-col_pos       = v_count.
w_catalog-fieldname     = field.
w_catalog-ref_tabname   = table.
w_catalog-ref_fieldname = reffield.
w_catalog-seltext_s     = text.
w_catalog-seltext_m     = text.
w_catalog-seltext_l     = text.
w_catalog-outputlen     = len.
IF field = 'ZTTLAMT' OR field = 'ZAMOUNTL'.
    w_catalog-no_zero     = 'X'.
    w_catalog-cfieldname = 'WAERK'.
    w_catalog-datatype    = 'CURR'.
ENDIF.
IF FIELD = 'ZRATE' OR FIELD = 'ZAMOUNT'.
IF field = 'ZAMOUNT'.
    w_catalog-no_zero     = 'X'.
    w_catalog-cfieldname = 'ZCURCODE'.
    w_catalog-datatype    = 'CURR'.
ENDIF.
IF field = 'ZQTY' OR field = 'ZRATE'.
    w_catalog-no_zero     = 'X'.
    w_catalog-datatype = 'DEC'.
ENDIF.
APPEND w_catalog TO t_catalog.
CLEAR w_catalog.
ENDFORM.
FORM sf    USING   fieldname sortup group.
v_count = v_count + 1.
CLEAR w_sort.
w_sort-fieldname = fieldname.
w_sort-spos      = v_count.
w_sort-up        = sortup.
w_sort-group     = group.
APPEND w_sort TO t_sort.
ENDFORM.
FORM alv_user_command USING in_ucomm    LIKE sy-ucomm
                             in_selfield TYPE slis_selfield.
DATA: lfs_data LIKE t_data.
IF in_ucomm = '&IC1'.
    READ TABLE t_data INDEX in_selfield-tabindex INTO lfs_data.
    CHECK NOT lfs_data-zdidbl IS INITIAL.
    IF lfs_data-type = 'DBL'.
      DATA: l_zdbl LIKE zmsd_diheader-zdinum.
      l_zdbl = in_selfield-value.
      EXPORT l_zdbl TO MEMORY ID 'VBL'.
      CALL TRANSACTION 'ZMSD_BL01'.
    ENDIF.
    IF lfs_data-type = 'DI'.
      DATA: v_dinum LIKE zmsd_diheader-zdinum.
      v_dinum = in_selfield-value.
      EXPORT v_dinum TO MEMORY ID 'VDI'.
      CALL TRANSACTION 'ZMSD_DI01'.
    ENDIF.
ENDIF.
ENDFORM.
FORM get_gst_value.
LOOP AT t_det WHERE zsammg = v_zsammg
     AND ZINVNO = V_ZINVNO.                              "MADK991565
    CHECK t_data-zccode IN s_zccode.
    t_det-zamount = t_det-zamount * t_det-zexrate.
    SELECT SINGLE y0mmtarget2
            INTO   v_target2
            FROM   y0mmipstranslate
            WHERE y0mmdatatype = '70' AND
                   y0mmsource = t_det-zchrcode.
    SELECT SINGLE y0mmtarget1
           INTO   t_det-type
           FROM   y0mmipstranslate
           WHERE y0mmdatatype = '76' AND
                  y0mmsource = v_target2.
    IF t_det-type NE '3Z'.
      v_gsttotal    = v_gsttotal +
                           ( t_det-zamount * 5 / 100 ).
    ENDIF.
ENDLOOP.
Regards,
Raj.

Hello,
Following is the procedure to convert alv output to spool and then it to PDF Format.
After we display the ALV, we can check whether it is running in the background using system field u2018sy-batchu2018. Then,we call an function module named u2018GET_JOB_RUNTIME_INFOu2019 to get the current job information. Then go to spool request table tbtcp to get the spool id.
Get current job details
CALL FUNCTION u2018GET_JOB_RUNTIME_INFOu2019
       IMPORTING
            eventid                 = gd_eventid
            eventparm               = gd_eventparm
            external_program_active = gd_external_program_active
            jobcount                = gd_jobcount
            jobname                 = gd_jobname
            stepcount               = gd_stepcount
       EXCEPTIONS
            no_runtime_info         = 1
            OTHERS                  = 2.
SELECT * FROM tbtcp
                 INTO TABLE it_tbtcp
                 WHERE      jobname     = gd_jobname
                           AND jobcount = gd_jobcount
                           AND stepcount = gd_stepcount
                           AND listident <> u20180000000000u2032
                           ORDER BY   jobname
                                               jobcount
                                               stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
Finally, we can call function module u2018CONVERT_ABAPSPOOLJOB_2_PDFu2018 to convert spool reqeust(which is stored in OTF format) to PDF format. Then we can call either function module u2018SO_DOCUMENT_SEND_API1u2032 or SAP BCS (Business Communication Service) to send the pdf as an email attachment.
CALL FUNCTION u2018CONVERT_ABAPSPOOLJOB_2_PDFu2019
       EXPORTING
            src_spoolid              = gd_spool_nr
            no_dialog                = c_no
            dst_device               = c_device
       IMPORTING
            pdf_bytecount = gd_bytecount
       TABLES
            pdf = it_pdf_output
       EXCEPTIONS
            err_no_abap_spooljob     = 1
            err_no_spooljob          = 2
            err_no_permission        = 3
            err_conv_not_possible    = 4
            err_bad_destdevice       = 5
            user_cancelled           = 6
            err_spoolerror           = 7
            err_temseerror           = 8
            err_btcjob_open_failed   = 9
            err_btcjob_submit_failed = 10
            err_btcjob_close_failed = 11
            OTHERS                   = 12.
Regards,
Sayali
Edited by: Sayali Paradkar on Apr 20, 2010 12:51 PM

The replay of the song isn't possible because the song isn't available or through DRM is restricted. All the songs are buyed in the iTunes Store. Give it a solution to activate the songs on my ipod touch ?

Hello together, I've a problem with some songs in my playlists on my new ipod touch. The error message says that the replay of the song isn't possible because the song isn't available or through DRM is restricted. All the songs are buyed in the iTunes Store. Give it a solution to activate the songs on my ipod touch ?

Do the non-syncing songs play in iTunes?
Were the syncing and non-syncing songs purchased with the same account?
Can you directly download the the songs to the iPod? See:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Enabling a User through OIM API

Hi I am trying to enable a user through OIM API, However the end date is already passed for that user, I am setting up a new end date through the Program (showm below). However the update user is not working (i am not sure).
Map usermap = new HashMap();
usermap.put("Users.User ID", User_id );
Map grpmap = new HashMap();
grpmap.put("Groups.Group Name", Group_Name);
tcResultSet ts = userClient.findUsers(usermap); //find all users
String existing_end_date = ts.getStringValue("Users.End Date");
tcResultSet tg = groupClient.findGroups(grpmap); //find requireq group
long ukey = ts.getLongValue("Users.Key");
long gkey = tg.getLongValue("Groups.Key"); //find group key
// ENABLE THE USER
java.util.Date new_end_date = new java.util.Date(111,1,1);
Calendar cal = Calendar.getInstance();
cal.setTime(new_end_date);
DateFormat dateFormat = new SimpleDateFormat("yyyy-MM-dd hh:mm:ss");
String Str1 = dateFormat.format(cal.getTime());
String Str2 = existing_end_date + " 12:00:00";
System.out.println(User_id+" OLD End Date:" + Str2 + " New End Date: " + Str1);
Map usermap2 = new HashMap();
usermap2.put("Users.User ID", User_id );
usermap2.put("Users.End Date", Str1);
userClient.updateUser(ts,usermap2);
userClient.enableUser(ukey);
I am getting the following error:
U0000018 OLD End Date:2009-09-30 12:00:00 New End Date: 2011-02-01 12:00:00
2/12/2010 15:02:53 oracle.j2ee.rmi.RMIMessages EXCEPTION_ORIGINATES_FROM_THE_REMOTE_SERVER
WARNING: Exception returned by remote server: {0}
Thor.API.Exceptions.tcAPIException: The user cannot be enabled because the end date is passed.
Not sure why it is happening. It looks like the Updateuser is not working, or something else?
Please advise. Thanks in advance.

Hi Suren,
thanks for the note.
I found that as soon as I enable the user, I am getting the followimg messages in the opmn logs:
INFO,06 Dec 2010 10:55:41,841,[XELLERATE.JAVACLIENT],System Event Handler: Validating Organization for an User.
INFO,06 Dec 2010 10:55:41,944,[XELLERATE.JAVACLIENT],System Event Handler: Triggering Processes related to User.
INFO,06 Dec 2010 10:55:42,402,[XELLERATE.JAVACLIENT],System Event Handler: Enabling the User
INFO,06 Dec 2010 10:55:42,421,[XELLERATE.JAVACLIENT],System Event Handler: Validating Organization for an User.
INFO,06 Dec 2010 10:55:42,427,[XELLERATE.JAVACLIENT],System Event Handler: Triggering Processes related to User.
INFO,06 Dec 2010 10:55:42,439,[XELLERATE.JAVACLIENT],System Event Handler: Changing application data based on Organization change.
INFO,06 Dec 2010 10:55:42,442,[XELLERATE.JAVACLIENT],System Event Handler: Auto-Group Membership Event.
INFO,06 Dec 2010 10:55:43,715,[XELLERATE.JAVACLIENT],System Event Handler: Evaluating User Policies
So, the access policies are getting evaluated, triggering provisioning processes.
What I am planning to do is, to disable the access policies and try to run the Program.
Because of this issue, my Program is throwing an error (until I looked into the opmn logs, it doesn't make sense).
6/12/2010 10:55:50 oracle.j2ee.rmi.RMIMessages EXCEPTION_ORIGINATES_FROM_THE_REMOTE_SERVER
WARNING: Exception returned by remote server: {0}
Thor.API.Exceptions.tcAPIException: Error occurred enabling Xellerate User instance.
Regards
Vijay Chinnasamy

Access Policy is not getting trigggered after creation of user through GTC

Hi,
I have an access policy for ALL USER role and that provision users to an RO after getting created in oim. I have a trusted source flat file reconciliation GTC for user creation. I am facing issue when user is getting created through GTC, access policy is not getting triggered. But while creating an user through web console the same access policy is working fine and user is getting provisioned with RO.
If anybody have any idea how to resolve this, please help me in this regards.
Regards,
Avijit

Hi ,
its good to know that its working. As per my experience it works for once (through reconciliation) but then stops working. Now to confirm try to revoke the user by changing the group member-ship through reconciliation and see if the resource is revoked or not (repeat it for 2 -3 times). Note that don't do it form within IDM web admin console, do it through reconciliation.
do post your results.......
Regards.

How to Send the result of a report to a user through email.

Hi,
We have a report. It creates quotation. It automatically sends the report to the printer.
in nace transction - for the particular quotation type - the output types are defined. The output types for printer, Fax, External Send and Edi is defined.For printer, the processing routine is zprogram.
I want to send this report to the user through email. What i have to do? Whether i have to modify the zprogram or i have to define seperately output types for email also, without modifying the program?
Pl try to give me replies as early as possible.
Thanks
Mallik.

Hi,
Check this link.
function to send e-mail
Reward points if useful.
Cheers,
Swamy Kunche

User login report in Active Directory for specific date and time

I want to get User login report in Active Directory for specific date and time e.g user logged in at15-01-2015 from 8:00am to 4:00pm
Is any query, script or any tool available?
Waiting for reply please

You can identify the last logon date and time using my script here: https://gallery.technet.microsoft.com/scriptcenter/Get-Active-Directory-User-bbcdd771
If you would like to get back in time and see when the user did a logon / logoff then you need to have auditing enabled. Once done, you can records from Security log in the event viewer: https://social.technet.microsoft.com/Forums/windowsserver/en-US/98cbecb0-d23d-479d-aa65-07e3e214e2c7/manage-active-directory-users-logon-logoff-events
I have started a Wiki about how to track logon / logoff and it can help too: http://social.technet.microsoft.com/wiki/contents/articles/20422.record-logon-logoff-activities-on-domain-servers-and-workstations-using-group-policy.aspx
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

User through scp to restricted directory

Similar Messages

Maybe you are looking for