Using 2 discount conditions as %10+%15=%25

Dear all,
I have 2 discount conditions. Z01= %10 and Z02 = %15
Normally if pricing procedure like below, system use the conditions by one by and total discount is less than %25
PR00
Z01
Z02
Customer wants to use the discount as %10+%15=%25
How should I design the pricing procedure to achive this.
Thanks

Hi,
1.maintian subtotal for 2 discount condition types.( Z01+Z02 = subtotal 1)
2.Copy the subtotal 1 value to another total discount condition type (Z03)
3. Maintian condition record in VK11 for Z03 as 100%.
Hope this helps.
Regards,
Sharan
Edited by: SharanKumar.S on Oct 31, 2011 2:25 PM

Similar Messages

Issue in using custom discount condition type in pricing agreement at Service Contract line item level

Hello
We are facing an issue while using a Z discount condition type in price agreement at service contract line item level.
A Z Condition type has been created in ECC and assigned to the pricing procedure. This pricing procedure is downloaded in CRM and determined in the service contract.
A condition maintenance group using this Z condition type is created in CRM and assigned to service contract item category.
Condition records are created in CRM for this condition type/condition maintenance group for specific products along with sales org and discount percentage.
But when the price agreement(using this condition type) is used at the item level of a service contract, the system throws errors (related to product/unit of measure and sales org, even though no issues seem to be there)and thus the price agreement is not allowed to be used.
If anyone has worked on such kind of scenario, please get in touch, I will share more details for the same.
Regards
Ankit Arora

Dear Ankit,
Once the pricing procedure is downloaded, please maintain the document pricing procedure at service contract header level, and maintain the customer pricing procedure at business partner sales area billing data.
In spro, maintain the pricing procedure for the combination of sales area, document pricing procedure, customer pricing procedure.
Please crosscheck whether the condition table is active or not.
Regards,
Maddy

We would like to Use the SKTO condition type as Acrual condition

Hello Experts,
We have a requirement to track the possible cash discounts in discounts bucket, Hence we though that we will use the SKTO condition type as a Accrual condition type and post to Accrual accounts at the time of billing document creation.
While processing the Payment we will clear the bucket with relevant discounts with eligible payment terms.
We are debating and discussing the use of SKTO as a Accrual condition type and start posting GL accounts with it (This means that we are removing the statistical check box from pricing procedure).
In a nutshell our requirement is.
1. Track the cash discounts in a Accrual bucket.
2. Relieve the accrual when payment is applied (This will be done in Cash app)
3. What are the consequences of making this change?
4. Is there a better way of managing this?
Thanks
Sreedhar

Hi,
Your issue can be solved by CO consultant.
Your CO consultant can generate report from CO-pa documents.(when invoice is released to a/c ,FI and CO documents are generated) and you know SKTO- cash discount amount even if it statistical condition type.
You do not need to change in Pricing procedure for tracking cash discount.
SKTO is linked wtih payment terms and it is applied accordingly through standard programs.
thanks,
Vrajesh
Edited by: Vrajesh G. Nayak on Jun 2, 2010 5:12 PM

Regarding the Discount condition type in sales order

Hi All
I have 3 key combinations in my Discount Condition Type. I have maintained records at all the 3 key combinations and all the records are relevant for a sales. In my sales order all the relevant records (all 3 records) getting displayed, but for calculation all the three discounts are considered. I do not want use exclusive concept in access sequence.
But when i use the same access sequence for Base Price, it is behaving deferrently, where whatever record is found at the last is getting considered for calculation.
Please give your valuable comments.
Your inputs are appreciated.
Thanks and Regards
Prasad

Dear Friend,
If you have specified the various Discounts under the three access Sequence .
There your pricing system condition type will have three records.
To achieve the best result you might use the requremnets routine in the access sequence determination.
But if you consider this......
Take Three discount Condition types for that matter....
Now to find out the best conditions out of conditions you can use the functionally of Condition exclusions
which you will find in the Basic Functions --> Condition Exclusions.
This methord you will not be required to maintain any routine.
regards,
SAP SD

DIscount condition types mapping to value field (+/-)

Hi,
1)While mapping SD condition types to Copa value fields, do we need to check the transfer +/- symbol for all discount condition types...
or when do we need to check it..
2) In our case we have some 4 to 5 discount condition types mapped to copa... If we check that symbol, as discount will always be negative system is posting discount values in negative in copa. At the time of report execution, since we give formula as Sales Less discount and discount is already negative in system it is getting added... so we are planning to change formula as sales + discounts... is that approach is right?
Reg
Karthik

Hi Ajay,
Thanks for your quick reply... generally for which condition types do we need to check this indicator in ke4i... for all discount condition types and rounding off condition types... is that right? Because as I told we have some 4 to 5 discount condition types and we have ticked for only one discount condition type which is mostly used...
Reg
Karthik

Discount Condition

Hi,
In sales Order there are 10 items
on that client is giving Rs.100 Discount on total (Means addition of basic price of all the 10 items).
my client is not interested to enter discount itemwise so I check the header option in Discount
condition type Now System taking discount condition at header level but he does not getting the
base value for calculation so he is showing zero price
My question is what settings required to give discount condition on total item not Iitem level?
Regards,
Akshay

Akshay Dalal,
You can use Header Condition Type like
HB00 (Fixed Amount) or
HA00 (Percentage Discount),
RB00 Absolute or numeric value which applies to all items.
in the item details, remove the Group Condition Indicator. It is applicable to all the line items. It appears in the header level of sales order. There is no access sequence for header conditions. You will have to enter value Manually.
Say Take RB00 For Example you have 5 line items. now go into header detials of the order
click the conditions tab Enter RB00 = 10
Then this value is applicable for all the items in the order. In The Pricing Procedure try to maintain the From and To columns appropriately.
Check this
Also Check this link
[header conditions]
Regards
Sathya
Edited by: Sathya Pavan Yedavalli venkata on Apr 20, 2009 1:31 PM

Cash discount condition types

Hi Gurus,
what is the difference between SKTV and SKTO cash discount condition types?
Thanks

Dear Biswas,
Both SKTO and SKTV is Cash Discount Condition Type. Both of them are Item Condition Type.
The major difference among the two is SKTV is Group Condition.
As per Standard Group condition - It indicates whether the system calculates the basis for the scale value from more than one item in the document. To use it effectively, the items must belong to a group. You can freely define the group to meet the needs of your own organization. The items can, for example, all belong to the same material group.For instance, a sales order contains two items. Both items belong to the material group 01.
- Material Quantity Material group
A 15 01
B 10 01
The group condition indicator is set in the definition of the condition type for material group discounts. The condition record for material group 01 includes the following pricing scale:
Scale quantity Discount
from 1 pc -1%
from 20 pc -2%
Neither item alone qualifies for the 2% discount. However, when the items are combined as part of a group condition, the combined quantity creates a basis of 25 pieces. This basis then exceeds the scale value of 20 pieces, which is necessary to qualify for the higher discount.
So, these both Cash Discount Condition Type works on the basis of Cash payment received with relevent term of payment for Cash Discount, if offered any to you customer.
Regards,
Abhee.

To write&activate new Requirement for customr discount condition type k007

Hi Guru's,
how to write and activate new Requirement for customer discount condition type K007 in VOFM.
could please guide me step by step process or if you have any programming language related to this please provide me that would be helpfull to me...
please let me know if my question is not clear..
Thanks in advance and will give full points...
Srinivas.

Hi S,
u can use options condition value, condition based values for this requirement.
1.all Z requirements starts from 9xx onwards ,
2.u need to use Internal tables KOMP in that requirements based on the given conditions.
3. Dont active all , select only new requirement->Edit->Active.
ref any standard requirement for sample codes.
regards
Prabhu

How to set discount condition for distount condition?

Hellow!
We use price condition ZP01 (base price)
Then discount condition ZDI1 (discount for customer group and material group) is implemented for base price
This works fine.
But now I need to implement extra condition to correct discount. It is percent condition which redice discount for customer.
Example
base price ZP01
100 EUR
discount ZDI1
cust group 01 material group 01 - 10%
cust group 01 material group 02 - 20%%
DISCOUNT CORRECTION (ZDK)
cust 1001 0,7 (or 30%) (cust 1001 in 01 customer group)
It means that discount in sale document for material group 01 should be 7% and for mat group 02 14% . So condition ZDK reduce discount perchens but not item price.
Please help me, how ZDK should be inserted into price procedure.
Andrey Garshin.

Hi Andrey,
Are there any logical reasons behind the reduction as follow:
1) 10% --> 7% (Material Group 1)
2) 20% --> 14% (Material Group 2)
If there are logic to these reduction, you can proceed to write a routine in VOFM and assign it accordingly for condition type ZDK in your pricing procedure. However, this does not seems to be a standard practice and business wise this would also appear to be rather inflexible and are constrained by the routine you built alone.
Alternative to the above, I would recommend that you could also consider using the standard condition type PMIN (minimum pricing) given in the standard pricing procedure. The reason you are probably reducing (or correcting) the discount is also because too much discounts are granted in any sales transaction and therefore you may want to establish a control that there should be a minimum price for a particular material sold. This can be achieved automatically using the PMIN condition type.
As such, if the minimum price is not met during pricing in sales order transaction, then the system automatically determines the difference using condition type PMIN.
Example:
Condition record PMIN: USD 1,000
Sales Order Pricing:
PR00 (Basic Price) = USD 1,250
K007 (Customer Discount) = USD 300
PMIN (Minimum Price) = USD 50
Net Value = USD 1,000 (as per PMIN condition record USD 1,000)
Whenever minimum price for a material change, you can just change the condition record to quickly change your requirement without changing the configuration.
Hope the above helps give an idea on how to approach your discount design.
Thanks.

Authorization for discount condition type

Hi Experts
1)when create a sales order client want flexibility for discount condition type
like 10% ,15% , 20% it should not be manual and end user can choose from drop down and
2) If they want to give excess discount there should be authorization any supervisor can give excess discount
how to map this authorization to condition type
Regards

hello again, friend.
go to IMG > SD > Basic Functions > Pricing > Pricing Control > Define Cond Types... here you will find the settings for the upper and lower limits. please note that the larger discount rates would be represented by the lower limit. for surcharges, the lower rate is the lower limit.
scales in pricing allows you to set different discount/surcharge rates or fixed amounts depending on either value, quantity, weight, etc. in the same pricing condition record (using VK11 or VK31). if you look inside your condition type using V/06, you will see under sub-tab Scales if this has been set.
example: condition type Z007, with Scale 'Quantity'
you can set a discount of 2% if item quantity is from 0 to 100 pieces
you can set a discount of 3% if item quantity is from 101 to 200 pieces, and so forth...
regards and thanks.

Using multiple 'and' conditions in a SQL query

Is it possible to reduce the SQL required to query using multiple 'and' conditions, e.g. I have a query like the following:
select stat.personal_id, appt.username, appt.password, apps.rgn_apt_id, apps.apy_apn_id
from apy_ast_application_status stat, rgn_usr_user appt, rgn_aps_applications apps
where stat.apy_apn_id = apps.rgn_apt_id
and apps.rgn_apt_id = appt.rgn_apt_id
and stat.application_completed is null
and stat.application_started_date > '01-MAY-11'
and stat.amount_paid is null
and stat.personal_details = 'C'
and stat.further_details = 'C'
and stat.education = 'C'
and stat.employment = 'C'
and stat.personal_statement = 'C'
and stat.choices = 'C'
and stat.reference = 'C'
and stat.student_finance = 'C'
Is there a way, to reduce all the multiple 'and' queries, to be read from say one line? If you know what I mean.......

Ah, Ok this looks nice, thanks very much. It doesn't quite run as is because the stat.amount_paid query value is 'is null', while the others are 'C'. I tried amending the relevant line to various versions of the following:-
in (select 'is null' 'C','C','C','C','C','C','C','C' from dual)
which doesn't work.
I can get the following to work so I am assuming that the it is not possible to use different query values within the brackets of the 'in (select....' statement?
select stat.personal_id, appt.username, appt.password, apps.rgn_apt_id, apps.apy_apn_id
from apy_ast_application_status stat, rgn_usr_user appt, rgn_aps_applications apps
where stat.apy_apn_id = apps.rgn_apt_id
and apps.rgn_apt_id = appt.rgn_apt_id
and stat.application_completed is null
and stat.application_started_date > '01-MAY-11'
and stat.amount_paid is null
and (stat.personal_details, stat.further_details, stat.education,
stat.employment, stat.personal_statement, stat.choices, stat.reference, stat.student_finance)
in (select 'C','C','C','C','C','C','C','C' from dual)
Thanks for everybodys help - the suggested alternatives seem so much more elegant

Sale order showing a discount condition type twice in conditions Tab

Dear Experts,
Sale order showing a discount condition type twice in conditions Tab.
Could you resolve my issue?
Thanks in advance.
Regards,
Ravi

Hi,
In the Sales order, go to Conditions and in the Pricing 'Analysis' , check for where the system is determining the two values of this discount condition. It may be possible that it is determining from two condition tables.
Also in the access sequence of this condition type, please make sure that the 'exclusive' indicator is checked for the condition tables.
Please check if it helps.
Thanks,
Saurabh

How to use coupon discount in sales order?

Hi,Experts,
I want to add coupon discount in order, do I need some config in order transaction type?
Right now, I can't5 find some field to fill in coupon code, even I fill in the product and customer in former coupon.
Could someone help me on how to use coupon discount in transaction level?
Any config or maintainance instruction will be highly appreciated.
Best regards,

Coupons are generally related to the campaigns.
If you are creating an order through the transaction crmd_order, you can mention the campaign document id, under the tab "Header Overview" in the field "Camp./TP".

How to use a purchase condition in the sales order

Hello,
Customer would like to have a purchase "day-price" appearing in the pricing of the sales order.
I would suggest to write abap code (reading the correct PU condition record) in a condition base value routine that would be added in the customizing pricing procedure at SD side.
Is there any "more standard" solution for this ?
Thanks,

Hello,
Here is the case in more detail :
This question concerns a product that is just purchased, stored, and sold. The purchase-price is based on a "day-price" that is maintained in a purchase condition record on a daily basis. The sales-price should be that daily price with a markup in %.
So, in the sales order, this purchase condition record should be picked up with the material and the pricing date as key. From that base price, a markup can be calculated in sales pricing.
I would suggest to use the field "condition base value" in the setup of the sales pricing procedure (Ref to IMG sales and distribution, pricing control, define and assign pricing procedures). In that field a new routine could be entered that (with a select or function or Bapi) picks up the purchase condition record-value.
I would like to know if this would be a "correct" way of solving this requirement, if there is no "more standard" solution, if anyone has experience with a similar requirement and how you solved it ?
Thanks,

Discount condition type not appearing in sales order but in invoice

Hi,
I have two discount condition types (MPDI,ZSDI) in my pricing procedure,at the time of sales order creation one discount condition is not appearing.
On analyzing the condition type MPDI,system throws message "Access not been executed due to previous access",what would be the reason.
In the billing ,i could see the condition type appearing.I have checked this,but i could not understand why it is happening.Even the condition catergory of condition is empty not L.
Also please find the screen shots below,
Pradeep

Pradeep,
Am sure user might have deleted the condition type in sales order, the same condition type woudl have entered manually in invoice.
Please check my testing, i have done the same entered ZA09 manually and after saving have deleted again in sales order, after dilivery and when i created invoice here i have entered manually the same condition type.
So in your case also the same thing could have happend, check the change log and also in invoce condtion tab check the condtion type in analysis ( Invoice analysis not order). so that you can udnerstand whether it was entered manully or not.
On analyzing the condition type MPDI,system throws message "Access not been executed due to previous access",what would be the reason.
This is because in the condtion tyoe the abvoe key combiantion was found with records hence the below key combition was ignored. this you observe in your screen shot with with 5.00
So my guess is the condtion records was deleted in sales order.
thanks,
srinu.

Using 2 discount conditions as %10+%15=%25

Similar Messages

Maybe you are looking for