Using a BSP page to hide report url ?!

Hello everybody,
I would like to 'hide' exact query url.
I have found in SICF transaction external aliases but I can replace only a part of my url, ie :
http://host:port/sap/bw/bex?parameters => http://host:port/test?parameters
I would like to replace all the url in :
http://host:port/sap/bw/bex?parameters => http://serveuralias/
This url has to be the same for each BW reports ... (little bit stupid i think but ...)
How can i do this ?
We told me that we can parameter a BSP page in SICF, on bex service, which call bw reports and thus we should only see the bsp url in IExplorer and not BW report url. Is it possible ?
Thanks a lot,
CG.

hi tom,
can u tell which method u r using for URL parameter passing?
regards,
kamaljeet

Similar Messages

Trash in BSP-Pages for ABAP-reports

Hi,
it´s strange that I´m getting trash in the BSP-Pages that represent an ABAP report. I just can´t identify how it is produced and shows up between Titel and real list. I use
          SUBMIT (progr_name)
             WITH SELECTION-TABLE sel_table
             EXPORTING LIST TO MEMORY AND RETURN.
and then CALL FUNCTION 'LIST_FROM_MEMORY'
later    CALL FUNCTION 'WWW_HTML_FROM_LISTOBJECT'
I make a loop with the output and save all in a variable of type string, which is later used in the layout page.
After execution, I get something like:
     Title       page Nr.      User name
     trash
     more trash
     even more trash
     list
the data that I describe as trash is information from the list, but it also appears where it must.
Has anyone experience with it ?? Thanks

I am also getting some "trash" at the beginning of my report in some cases. The report list I am sending the FM contains Material Descriptions and our descriptions (can) contain a combination of slashes (/), colons ( and commas (,) (eg. SPARES:DISPLAY/GASKET,MONO,GEMINI) - I find that if I remove the commas from the descriptions during the reporting, that I do not have this problem. However this is not a viable solution. Any ideas would be very helpful.

Hide report URL parameters and it's vlaues

hi every body
how i can hide the value of parameter when call report in url
http://server:port/reports/rwservlet? orientation=PORTRAIT&desformat=PDF&destype=cache&report=E:\stud_free\Form\emps.rdf&
userid=scott/tiger@orcl&server=repserver&emp_no=7777&department_id=10
those paramters can i hide by using cgicmd.dat file and put them into key ,it's good.
orientation=PORTRAIT&desformat=PDF&destype=cache&report=E:\stud_free\Form\Card_stu_C.rdf&
userid=scott/tiger@orcl&server=repserver
but those parameters?
emp_no=7777&department_id=10
how i can hide it's values ??
* notice that the values oh those parameters are variables that means i pass it's (values) at RUN TIME
any help?

You can't.
1. Instead of calling a report directly like that, you could write a server side program (in jsp, php, or mod_plsql for instance) and POST the data to this program. This program then does the actual call to the report.
Posted data is not seen in the URL.
2. If you are calling reports from Forms, use run_report_object instead of calling the report via a URL.
3. I remember there is a document on OTN somewhere that explains how to use a cookie to achieve the same. See if I can find it again....
Ah, here it is:
http://www.oracle.com/technetwork/developer-tools/forms/frmwebshowdoc-rep-128094.pdf
However, this is a solution that works in Forms, since it uses a Forms Java Bean.
Edited by: InoL on Sep 27, 2011 8:50 AM

Using a dynamic page in an enclosure url tag.

I am trying to use a dynamic page (e.g. asp, jsp, .cfm) to stream content to itunes as part of a podcast.
So... the ASP file opens an mp3 file on the server-side, and sends it in binary format down to itunes. I setup the correct file type in the header (e.g. application/octet-stream) in the , but it does not show up in the podcast (everything else does).
The question is, if itunes sees something other than "mp3, m4a, m4b, m4p, etc." in the <enclosure url> tag, is it just rejecting it based on the name?
If I just take the URL that is in the enclosure and paste it in a browser, the file comes up fine with no dialog, etc., it just streams to the browser which invokes itunes which plays it.
But again, the podcast is not loading it.
Any help appreciated.
Scott.

I don't know anything about asp or javareg.
In Java, if classes are in a jar file, the jar file must be specified explicitly in the classpath, not just the directory containing the jar file. Maybe you already know this, but worth a shot.

How to login CRM 2007 BSP page use account domain of Microsoft AD

Dear friends,
I am finding solution to setup system with the requisite:
- Login to CRM 2007 Business Server Page use account domain which is managed by Microsoft Acitve Directory.
- Users use only web browser, they didn't use SAPGUI and they must type username, password ( their username,password are managed in Microsoft AD, not in SAP system) in every login to BSP page, don't use solution like X.509 client certificate.
I used to configured using SNC and I could login to SAP System using SAPGUI without type SAP username and password when I log in my computer by account domain( my computer is joined in domain).
But my requisite is have to use account domain( username and password) and type them in web browser when I want to log in SAP system, could not configured to go to directly SAP application ( BSP page ) without type username/password of account domain.
After time looking for solution about authentication :
http://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/8039306e-cea4-2a10-15b9-8e96d40c51ef [original link is broken]
I think may be I could login to java portal by used username/password of account domain to authenticate after login to portal I use SSO to switch to BSP page without type username password again. This solution may be accepted because I was login to SAP application from web browser and used account domain.
Could you show me, there are anymore solution or how could I do to to set up my above solution.
Thanks and Best Regards.

The normal way to do this is to configure the authentication stack required on a JAVA stack (e.g. portal or standalone Java instance of NetWeaver or dual stack) and then configure the BSP app in SICF transaction to redirect to Java stack when no SSO2 ticket is sent by browser (e.g. user has already authenticated). The redirect to Java stack will be done, such that after user has authenticated to Java stack they will be issued with an SSO2 ticket and redirected back to the BSP app URL. From end users perspective, they will access the BSP app URL and get authenticated using Active Directory, and they won't know about the redirection since they will be logged into the BSP app once they have authenticated.
The authentication using Active Directory can be done using two methods:
- Using credentials already on workstation from workstation logon, e.g. using Integrated Windows Authentication
- Showing user a form where they enter AD account and password.
Thanks,
Tim

How to retrieve data from URL or querystring in bsp pages

hi
how to retrieve data from URL or querystring in bsp pages.
thanks
Edited by: Vijay Babu Dudla on Mar 23, 2009 7:35 AM

Hello Friend,
Vijay is correct.
REQUEST is a system object available in runtime of BSP application.
It is the object of interface IF_HTTP_REQUEST.
Use methof REQUEST -> GET_FORM_DATA( )
Regards
Krishnendu

Urgent!! url of bsp page

Experts,
ERP2005
I am creating bsp applications in dev system and each page in the application has the url of dev. system. if i transport the application to Q and then Prod systems, do the URLs be automatically be adjusted according to hostname or it should be done manually? if it is a manual process, should I go for using external aliases?
Regards!

Hi Graham,
let me explain again. i am not a big programmer of BSP applications. I am a HR functional guy. I am trying to use the features of Web AS to create BSP HTML pages easily.
I am not trying to create a complex application. a simple application which contains 40-50 HTML pages which are independent of each other. no navigation is needed.
for example:
dev system hostname is somehostdev.
Q system hostname is somehostq.
Prod system hostname is somehostprod.
say I have a BSP application in DEV as http://<somehostdev>.<domain>.........../startpage.htm
In HR configuration, above URL is used in one field like this:
URL: http://<somehostdev>.<domain>.........../startpage.htm (URL of above BSP page)
Description: Description for Medical Plan
So If the transport request is moved to Q system, i see above entry in the configuration. but it does not have host name of the Q system (obvious from the above entry). it has host name of the dev system. so, in Q ESS portal if I click the link, it is accessing the link from BSP page from DEV system not the one from Q R/3 system. it is because of above configuration.
It seems to me at this moment, to put the URL of BSP Page in the configuration field, and transport the customizing request. with this solution, there is lot of manual process.
first,
1. put the URL of BSP page with Q system host name in the DEV system, and transport the request to Q. Do the testing
2. change the URL of BSP page with P system hostname in the DEV system, and transport it to Q and then P.
there is lot of manual processing involved.
is there any way to get around this?

Adding a URL to BSP Page

Hello,
I want to add an URL to the BSP page, could anyone give me insights on this.
-Kewl

By adding a URL, do you mean that you want a link to another URL? You could always a plain HTML <a href>. Or you could use the HTMLB extension <htmlb:link>. Examples of the HTMLB elements can be found in the sample app SBSPEXT_HTMLB and HTMLB_SAMPLES.
On the other hand are you needing help building a URL to another BSP application? Or perhaps did your question have to do with navigation between pages or applications?

Questions on using classes inside BSP pages

Hi Group,
I have a few questions on how to use classes,interfaces,parameters in classes,
and etc., relating to OOPs concepts that can be implemented in BSPs.
Pls send me some link wherein I can explore things and use it in BSPs.
Thanks & Regards,
Vishnu.

Hi Raja,
I am facing issues like this:
1) When I use the code in my BSP as under:
<%
class ZCL_MODEL_03 definition load.
data ref1 type ref to ZCL_MODEL_03.
data cust_id type c value "1000".
data c_id type c.
create object ref1.
c_id = cust_id.
call method ref1->CHECK_CUSTOMER changing cid = cust_id.
%>
Cannot we define variables in the Scriptlet?? or we need to do only in the attributes sections only?? or in both??
2)I am not able to use both exporting & importing things in my method call.
eg.,call method ref1->GET_CUSTOMER
 exporting cid = cust_id
 importing c_id = eid.
In the method definition, I am only using simply logic like, I was trying to send a value into the "cid" defined in the method and putting that value into "eid" which was defined exporting, but, still I could not get the value into "c_id" that I have defined in the BSP page.
Note: in both the things(in BSP and class definition as well, I am using the same
 type for defining the attributes.
3)When can we define a "Returning" option in the Class method's parameter
 Definition? and how can I use it with an example?
Thanks in advance.
Regards,
Vishnu.

Using powershell to deploy provider-hosted app and specify remote Url instead of using appinv.aspx page

Hello all,
Could you possibly help me with provider-hosted app development/deployment process.
We developed SharePoint provider-hosted app that works just fine in development environment. Now we need to automate it's installation in test environment via powershell.
In AppManifest.xml that we are deploying we have key instead of explicit URL:
<App xmlns="http://schemas.microsoft.com/sharepoint/2012/app/manifest" Name="ShowAllRoomsApp" ProductID="{922a18aa-5592-b59a-4da9-4791baef02e7}" Version="1.0.0.0"
SharePointMinVersion="15.0.0.0">
<Properties>
<Title>SomeTitle</Title>
<StartPage>~remoteAppUrl/Pages/Default.aspx?{StandardTokens}</StartPage>
If we use as
https://technet.microsoft.com/en-us/library/jj655398.aspx recommends, we cannot specify Redirect Url as we can do this on
/_layouts/appinv.aspx
So now it seems like the only way to deploy this kind of solution is using appinv.aspx page.Or must we apply this URL in AppManifest on developing stage in Visual Studio?
What did I miss?
P. S. Even if I use /_layouts/appinv.aspx after powershell commandlets, I get error.

hi,
to deploy provider hosted app you need 2 things
1. Client ID
2. Redirect URL.
What you can do you can generate app from visual studio using clientID and URL from developer enviornment.
Now a app file is just a simple compressed zip file if you rename it as .zip and extract you will find AppManifest
inside it. So to create an app for Testing enviornment what you have to to Get the CLient ID (from AppRegNew.aspx) in testing enviornment. Unzip .App file change the AppManifest with testing client ID and URL than again zip file and rename as .app.
Now if you upload this file it will work.
To automate this scenerio i have created a simple windows Application in which i Pass the Client ID and StartURl and an App File it unzips the app file make changes to app and again zip it.
public static class AppPackageHelper
public const string StartUrlExpression = "{0}?{1}";
public const string StandardToken = "{StandardTokens}";
public static string Publish(string appPath, string ClientId,string StartUrl)
string tempDir = string.Empty;
string outPutFile = string.Empty;
try
string parentDir = System.IO.Path.GetDirectoryName(appPath);
outPutFile = System.IO.Path.Combine(parentDir, ClientId + "-Winshuttle.app");
tempDir = System.IO.Path.Combine(parentDir, ClientId.ToString());
Directory.CreateDirectory(tempDir);
int lastInd = appPath.LastIndexOf('.');
string tempPath = string.Empty;
string targetFilePath = string.Empty;
string cabPath = System.IO.Path.Combine(tempDir, System.IO.Path.GetFileNameWithoutExtension(appPath) + ".cab");
FileInfo fInfo = new FileInfo(appPath) { IsReadOnly = false };
File.Copy(appPath, cabPath);
XDocument doc = null;
string appManifest = string.Empty;
using (ZipArchive zipArch = ZipFile.Open(cabPath, ZipArchiveMode.Update))
appManifest = string.Format(@"{0}\AppManifest.xml", Directory.GetParent(cabPath).FullName);
ZipArchiveEntry manifestEntry = zipArch.Entries.LastOrDefault(e => e.Name.ToLower() == "appmanifest.xml");
manifestEntry.ExtractToFile(appManifest);
doc = XDocument.Load(appManifest);
XNamespace ns = doc.Root.GetDefaultNamespace();
string defaultUrl = string.Format(StartUrlExpression, StartUrl.TrimEnd('/'), StandardToken);
doc.Descendants(XName.Get("StartPage", ns.NamespaceName)).First().Value = defaultUrl;
doc.Descendants(XName.Get("RemoteWebApplication", ns.NamespaceName)).First().Attribute(XName.Get("ClientId")).Value = setupInfo.ClientId.ToString();
doc.Save(appManifest);
if (manifestEntry != null)
manifestEntry.Delete();
zipArch.CreateEntryFromFile(appManifest, "AppManifest.xml");
int totEnt = zipArch.Entries.Count;
for (int e = 0; e < totEnt; e++)
if (zipArch.Entries[e].Open().Length == 0)
//if (zipArch.Entries.Count > totEnt && e >= totEnt) break;
//zipArch.CreateEntry(zipArch.Entries[e].FullName);
File.Delete(appManifest);
if (File.Exists(outPutFile))
File.Delete(outPutFile);
File.Move(cabPath, outPutFile);
return outPutFile;
catch
throw;
finally
if (System.IO.Directory.Exists(tempDir))
System.IO.Directory.Delete(tempDir, true);
return outPutFile;
using System.IO.Compression.FileSystem.dll.
Also if you want to do it using powershell You need to do the same thing unzip-> changes values-> zip
So basic thing is You need to ahve only valid AppManifest file which contains 2 valid values Client Id and StartUrl
if you changes it inside appmanifest manuall than it will also work. Using above code you can create a console Application to do it. You can use powershell it just that i dont know how to zip unzip in powershell but i am pretty sure you can easily find it
on searching.
Whenever you see a reply and if you think is helpful,Vote As Helpful! And whenever you see a reply being an answer to the question of the thread, click Mark As Answer

When i try and open a tab that is the same as the page im currently on i closes it self. not when i type the full address, but when i use the arrow keys to select the url and press enter

when I try and open a tab that is the same as the page I'm currently on it closes it self. Not when I type the full address, but when I use the arrow keys to select the url and press enter. I just don't like typing in the same address 5 times, when the older Firefox worked.

Hi
AutoPunch enabled? Command click in the bottom half of the Bar Ruler to turn it off
CCT

Report standard SAP into BSP page

I want know how I can read the output of a standard report SAP R/3 into a BSP page ( WAS 6.20 ).

Hi Rick,
a short answer would be: create a BSP application and place the code into the onInizialization handler. But since you are completely new to BSP I'd recommend the following links for tutorials:
http://help.sap.com/saphelp_webas620/helpdata/en/e9/bb153aab4a0c0ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_webas620/helpdata/en/c8/101c3a1cf1c54be10000000a114084/frameset.htm
Recommended reading is also https://weblogs.sdn.sap.com/pub/wlg/542. [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
After you have done this and you still got questions, switch over to the BSP forum. There you'll find a lot more experts.
Have fun with BSP,
Ulli

Call to Jasper Report from a jsf only? Or can v use a jsff page?.

Hi,
I am new to JDev and ADF. I have a application using ADF . I have created Jasper reports as well and trying to Integrate the Reports .
If i make a call to the Jasper Report with a small dummy application it works.
But if i do the same from within the application it doesn work.
Should we make a call to the Jasper Report from a jsf only? Or can v use a jsff page?.
Waiting for answers. thanks in advance

Should we make a call to the Jasper Report from a jsf only? Or can v use a jsff page?.
This usually doesn't matter.
You will probably need to post some code so we can see how you generate and display report.
Dario

How to hide report tabs in webi using opendoc?

How to hide a report tabs in webi while accessing that report using OpenDoc??
Is there a way to see just the sReportName selected without show the other
report tab in the bottom of the document??

Hi,
As Mention By SUBBARAO MUCHERLA Either create 2 Different Reports.
Or
You can do one thing .
Add Complete Report in a Blank section .
Section (v_sec_All ="All")
   --Part1   //Table
   --Part2   // Chart
   --Part3   //Chart 2
   --Part n
Use this section(v_sec_All) in Linking Report Part .

How to create an url for bsp page to access in IE?

hi friends,
I am new to BSP topic.
I have created 4 BSP pages. and 1 Main BSP page. Now in Main BSP page i attached all the 4 BSP pages links.
Now when i test the Main BSP page it will show all the 4 BSP page links. All are working fine.
But the end user has to access this through IE by typing Main BSP page full path. It's some what becoming critical to enter full path. It will be access in internally(intranet) only not outside.
For this i want create an URL like http://empess.
When the user type this URL http://empess in IE and press enters then my main BSP page has to open.
How to do this. any helps will appreciate...
Regards,
Shree.

hi,
As u said i created External Alias as /ITCESS to my BSP application.
And i select my BSP application name from the Target Element tab. Then i selected the alias name i right clicked on it, i selected TestExt. Alis option. It's working fine.
But now the problem is, i want this to display in IE direclty, when user type the /ITCESS in Internet Explorer addres bar.
Regards,
shankar.

Using a BSP page to hide report url ?!

Similar Messages

Maybe you are looking for