Using a different TIME range that is different from the default TIME dim

Hi all - this is my first post - so please be gentle!
I am busy writing an EVDRE report on an application for which I need to use a different time range than what is currently the overall time dimension for all our other applications.
Currently the overall time dimension is set for MAR to FEB (Financial year). I now need to do a report for - OCT to SEP reflecting the YTD values?
The report also calls for having variable A compared against variable B over the extent of this period (OCT to SEP -> YTD). So in essence I will not be displaying any PERIODIC values but rather just the YTD values.
How can I do this without having to resort to a manual entry of each month's TIME dimension details and still ensure the report dynamically changes when I do an EXPAND?
I am using BPC 5.1 SP3 on Microsoft Office 2003.
Kind regards
Pieter

Well, without seeing the report and the setup, my suggestion is to leverage the EVTIM function.  If your columns are static, but the user selects a period for the report, you should be able to set-up the function to build the 2 sets of 3 months.  The EVTIM function simply references another time value, and adds up or down at a specific level as a member for use in the column (or that is where I would use it).
Does that make sense?

Similar Messages

  • Why is it when you set a calender event in outlook 2010 (in UK) with a reminder alarm for 30mins prior) and have the iphone set to keep the appointment time relative to the local country time that you travelled to, the alarm time is still at uk time ?????

    why is it when you set a calendar event in outlook 2010 (whilst i am in UK) with a reminder alarm for 30mins prior to the appointment time) and have the iPhone set to keep the appointment time relative to the new country time that i have travelled to (this works OK), the alarm time is still relative to the UK time and not in sync with the local country time like the main appointment is.
    Does anyone know the answer please.

    This has to do with the Time Zone Support selected in your phone. If you check in Settings>Mail, Contact, Calendars, there is a setting for Time Zone Support at the bottom of the page under Calendars. If that is turned to off, the calendar should support the local time. Because time is set to Automatic (since you say the time is correct on the iPhone), it is reflecting the local time. That information comes from the carrier, not the iPhone itself. You can check, however the iPhone says that if you turn off the Time Zone support, it should reflect in the local time. Do a test, if possible,  and see if that will do what you are asking.

  • In Logic 9, is there any way of editing the take folders of, say, 7 different drum tracks at the same time, so that each track has the same changes applied to its takes?

    In Logic 9, is there any way of editing the take folders of, say, 7 different drum tracks at the same time, so that each track has the same changes applied to its takes?

    scottiewade wrote:
    Thanks. I know how to select multiple tracks in the mixer, did that and put on group clutch,
    Hi
    Wrong..
    To assign tracks to a group, click in the dark gray box just above the automation (Read/Write/Off etc) on a channel strip, and select the group number you wish to use. The first tim eyou assign a group, the Group Setting swindow will appear automatically, thereafter you need to click on the group area and choose 'Open Group Settings'.
    Make sure that you have turned off Group Clutch (this disables all Groups)
    Maybe this will help
    http://support.apple.com/kb/VI248
    CCT

  • Anyone out there that can maybe help. I was using my 5s to record my meeting minutes for the first time and clicked cancel cos I wanted to continue recording and instead deleted it all! :( anyway to get it back?

    Anyone out there that can maybe help. I was using my 5s to record my meeting minutes for the first time and clicked cancel cos I wanted to continue recording and instead deleted it all! :( anyway to get it back?

    The other Allan is being facetious--you somehow found the forum for pre-2006 eMac desktop computers that gets little traffic.
    Getting you moved to the iPhone forums.

  • How to View Outlook Messages in Timezone different from the Systems Time.

    Hi Team,
    My Name is Abhishek. I am from India.
    I just want to know one thing related to MS Outlook 2007 Version.
    To deal with Hongkong customers and to work in database we have kept the systems time as HongKong Time (GMT + 07: 30) in my official Laptop.
    So. when I receive any email in the Inbox it shows the message received time in Hong Kong Time which is the systems Time right now.
    But As I stay in India, I just want to see my all Outllook received Messages in Indian Time (GMT + 05: 30), without disturbing the systems time.  I just get confused when I receive any email and it shows in systems Hong Kong Time.
    Is it possible to change my outlook message receiving display time to Indian time without disturbing my systems time...If so, pls help me by telling the procedure how to do it...
    Thanking You
    Abhishek

    Hi Abhishek:
    There are no
    Daylight saving time for  HongKong Time Zone and also for the Indian Time, so the checkbox will be greyed out.
    As
    Nezer mentioned above: “Adjusting the time zone in outlook also alters the system time, I think outlook is design to always mirror the time zone of you system clock.” We couldn’t change
    this within Outlook.
    Thanks for your understanding.

  • When I put a website Icon on my desktop, how do I make firefox use the Icon native to that website instead of the default Firefox Icon?

    When I drag and drop a website onto my desktop, how can I make Firefox use the icon native to that website instead of the default firefox icon?
    I have even gone painstakingly (SEVERAL TIMES) to the sites with IE, dragged the site onto my desktop in order to obtain the site native icons for my desktop (and deleted the ones with the Firefox icon) .... but they all soon revert to the default Firefox icon.
    E X T R E M E L Y F R U S T R A T I N G !!!!!!!!!

    I don't want icons from the Firefox library.
    I want the icon that comes from the website I'm making the shortcut for.
    (If you go to a site in IE you will see the site generated icon at the left end of the URL in the address field.)
    If I make IE my default browser I am able to get (and keep) those icons as shortcuts on my desktop without a problem.
    I want to keep Firefox as my default browser.
    So I want to know how to make Firefox accept the icon that comes from the website like IE does.
    I have even gone to the trouble to use IE to create the shortcuts with the site specific icons.....but after I do that...... FIREFOX CONVERTS THEM TO THE FIREFOX DEFAULT ICON as soon as I re-boot or refresh my desktop.
    I generally prefer Firefox as a browser....but If there's no fix.....I'm going to dump Firefox.

  • RV120W: The user attempted to connect using a dial-in medium that did not match the restricted dial-in media

      I am trying to configure a Cisco RV120W wireless using RADIUS. The IAS server is Windows 2003. The wireless client can’t access the wireless.  The ISA server keeps getting this error: Event Type: Warning Event Source: IAS Event Category: None Event ID: 2 User: N/A Computer: DEVICES1 Description: User ntdomain\blin was denied access. Fully-Qualified-User-Name = chicagotech.org/Users/Bob Lin NAS-IP-Address = 10.0.30.102 NAS-Identifier = Called-Station-Identifier = Calling-Station-Identifier = Client-Friendly-Name = RV102-Domain Client-IP-Address = 10.0.30.102 NAS-Port-Type = NAS-Port = Proxy-Policy-Name = Use Windows authentication for all users Authentication-Provider = Windows Authentication-Server = Policy-Name = CBG-All Authentication-Type = EAP EAP-Type = Reason-Code = 70 Reason = The user attempted to connect using a dial-in medium that did not match the restricted dial-in media. Check the dial-in constraints for the matching remote access policy. The public wireless and WPA2 work fine. Other Cisco 1240 wireless works fine with this event: Event Type: Information Event Source: IAS Event Category: None Event ID: 1 Date: 10/18/2013 Time: 1:33:19 PM User: N/A Computer: DEVICES1 Description: User blin was granted access. Fully-Qualified-User-Name = chicagotech.org/Users/Bob Lin NAS-IP-Address = 10.0.20.103 NAS-Identifier = WLC2504 Client-Friendly-Name = WLC2504 Client-IP-Address = 10.0.20.103 Calling-Station-Identifier = 90-18-7c-e6-95-aa NAS-Port-Type = Wireless - IEEE 802.11 NAS-Port = 1 Proxy-Policy-Name = Use Windows authentication for all users Authentication-Provider = Windows Authentication-Server = Policy-Name = CBG-All Authentication-Type = PEAP EAP-Type = Secured password (EAP-MSCHAP v2) Can you help?                  

    Dear Customer,
    Thank you for reaching the Small Business Support Community.
    The RADIUS configuration settings are intended to authenticate the wireless clients attempting to connect through a SSID and if this is the problem you have, I first suggest you to check on the RADIUS server IP address (Security>RADIUS Server), make sure it is reachable, and the authentication port number used by this server to send traffic and the shared key used to authenticate to the server which must match on both sides.  If all that is good, try using WAP Enterprise as the wireless security method and not WAP2 Enterprise.
    If the problem persits I then first suggest to to make sure you run the latest firmware release version 1.0.5.6;
    http://software.cisco.com/download/release.html?mdfid=282981372&flowid=796&softwareid=282487380&release=1.0.5.6&relind=AVAILABLE&rellifecycle=&reltype=latest
    Then contact support if the problem persists; (the "dial-in medium" part error I just don't understand what it has to do with the RADIUS wireless client authentication);
    https://supportforums.cisco.com/community/netpro/small-business/sbcountrysupport
    Please do not hesitate to reach me back if there is any further assistance I may assist you with in the meantime.
    Kind regards,
    Jeffrey Rodriguez S. .:|:.:|:.
    Cisco Customer Support Engineer
    *Please rate the Post so other will know when an answer has been found.

  • Cuando quiero dar setup,  aparece: The feature you are trying to use is on a network that is unavailable, y: The older version of itunes cannot  be removed. Help!

    Yo des intale itunes en mi laptop. Tiempo despues instale el ultimo itunes alli mismo. Cuando quiero darle el setup,  aparece: The feature you are trying to use is on a network that is unavailable, y: The older version of itunes cannot  be removed. Help!
    The feature you are trying to use is on a network resource that is unavailable
    I give it ok, I get same msg.
    I give it cancel, then: The older version of ITunes cannot be removed. Please contact your tech support group.                 
    Please help I need this ..

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • What to do that Safari is like the first time who i opened it

    How to uninstall Safari?
    What can i do that Safari is like the first time where i opened it?
    Because i got an Error Message if i would like to open a ne file, and I know that i have to do this that evrything is ok.
    So my question: What can i do that Safari is like the first time who I opened it?
    Thank you and I hope you understand my english..

    Install or Reinstall Mavericks or Mountain Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    OS X Mavericks- Erase and reinstall OS X
    OS X Mountain Lion- Erase and reinstall OS X
    OS X Lion- Erase and reinstall Mac OS X
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • Used my girlfriends computer to start my iPad for the first time I was logged into my iTunes account.  Now her iTunes in the user on my iPad how do I change it to mine.

    Used my girlfriends computer to start my iPad for the first time.   I logged into my itunes account.  Now the iPad has her iTunes account on it.  How do I change it to mine.

    You can log out of her account by tapping on the id on the right-hand side of Settings > Store and you can then log in with your id - is that what you want to do ?

  • I have been trying for two days to download the new icloud 4 that was offered at the same time as the new iTunes just prior to iOS8 release.

    I have been trying for two days to download the new icloud 4 that was offered at the same time as the new iTunes just prior to iOS8 release.
    I keep getting installer package error messages, I uninstalled the previous version to see if that was the problem to now find that I cant reinstall it as the new version is the only one available.
    Im using Windows 7, I'm assuming Im not the only one with this problem.
    Would a complete uninstall and reinstall of Apple software be of any benefit or is that just a cure all solution when nobody has an answer?

    @Dakotaep
    I am so sorry to hear of your experience with purchasing your new Samsung Galaxy Note 3!  This definitely should have been resolved in your first call to us.  I would be glad to review your account and ensure the Edge Agreement is corrected.  Please accept my "Follow" request and send me a direct message so I can further assist.  Thanks!
    AnthonyTa_VZW
    Follow us on Twitter VZWSupport on Twitter.

  • The fiscal year specified differs by more than a year from the fiscal year

    Dear All
    To rectify depreciation posted at development server I run OAGL which reset all depreciation posted (From FY 2008 to 2010), now when I am trying to post depreciation by AFAB for FY 2008 system showing error message
    No posting possible in fiscal year 2008
    Message no. AA688
    Diagnosis
    No posting is possible in the fiscal year 2008 specified. The fiscal year specified differs by more than a year from the fiscal year in which the last postings were performed.
    Procedure
    Correct your fiscal year specifications.
    please advice me what step to be follow
    Regards
    Sekhar

    Hi Sekhar,
    Error AA688 typically occurs in two situations:
    1) A company code did not have any depreciation posted in the previous year. See note 144441.
    2) If in a comany code no depreciation has been posted ever, then it is important to note that the periods of the last depreciation posting  in table TABA and the year and period of the last depreciation posting in table T093D (fields AFBLPE and AFBLGJ) are initial. You can set these fields to 000 / 0000 with the correction report attached in SAP note 26073.
    See if any of this information helps you further.
    Brigitte

  • HT204406 I am having a very difficult time with accessing my music from the cloud.  I need to have itunes open on my laptop in order for it to work.  And as soon as I close out itunes on my laptop, it gives me a warning that all users will be logged out. 

    I am having a very difficult time with accessing my music from the cloud.  I need to have itunes open on my laptop in order for it to work.  And as soon as I close out itunes on my laptop, it gives me a warning that all users will be logged out.  Help!!!

    Where are iTunes files located?
    No, I do not mean just the music.  Copying just the media/music files or the media folder creates problems.

  • WHEN I GO TO PRIVACY SETTINGS AND CLICK ON EXCEPTIONS AND TYPE IN A WEB ADDRESS TO ALLOW ALL THE TIME IT DOES NOT SAVE IT THE NEXT TIME I SIGN ON TO FIRE FOX IT IS LOST. IT WORKS FINE ON MY DESKTOP BUT NOT ON MY LAPTOP THAT I JUST BOUGHT in English.

    Question
    WHEN I GO TO PRIVACY SETTINGS AND CLICK ON EXCEPTIONS AND TYPE IN A WEB ADDRESS TO ALLOW ALL THE TIME IT DOES NOT SAVE IT THE NEXT TIME I SIGN ON TO FIRE FOX IT IS LOST. IT WORKS FINE ON MY DESKTOP BUT NOT ON MY LAPTOP THAT I JUST BOUGHT in English.

    I just updated my whatsapp...clicked on whatsapp in appstore and now can access my whatsapp

  • I would like to use slideshow in lightroom to export my video as a full screen 1920x1080 video with text overlays.  I am using text overlay in lightroom as it reads from the metadata that is easy for me to input in the library screen.  When i export from

    I would like to use slideshow in lightroom to export my video as a full screen 1920x1080 video with text overlays.  I am using text overlay in lightroom as it reads from the metadata that is easy for me to input in the library screen.  When i export from lightroom slideshow and choose the 1920x1080 resolution the end product is a very small video in the middle of a black background.  i have double checked and do not have any borders turned on.  Another option would be to export from the library but lr mogrify does not seem to put text overlays on video either.  Any input would be welcome.

    I dont understand anything you said in your post.
    Do you have a specific question about video production?
    The forums are for individual technical or creative issues that users have with video production. I am sur someone will be able to help you, but and to get a response it is best to ask a specific question.
    Is this about a technical problem you have or something about setting up a web site? If its the latter this is the wrong forum.

Maybe you are looking for