Why is it when you set a calender event in outlook 2010 (in UK) with a reminder alarm for 30mins prior) and have the iphone set to keep the appointment time relative to the local country time that you travelled to, the alarm time is still at uk time ?????
why is it when you set a calendar event in outlook 2010 (whilst i am in UK) with a reminder alarm for 30mins prior to the appointment time) and have the iPhone set to keep the appointment time relative to the new country time that i have travelled to (this works OK), the alarm time is still relative to the UK time and not in sync with the local country time like the main appointment is.
Does anyone know the answer please.
This has to do with the Time Zone Support selected in your phone. If you check in Settings>Mail, Contact, Calendars, there is a setting for Time Zone Support at the bottom of the page under Calendars. If that is turned to off, the calendar should support the local time. Because time is set to Automatic (since you say the time is correct on the iPhone), it is reflecting the local time. That information comes from the carrier, not the iPhone itself. You can check, however the iPhone says that if you turn off the Time Zone support, it should reflect in the local time. Do a test, if possible, and see if that will do what you are asking.
Similar Messages
-
I've restored settings and restarted to no avail. Anyone else have the issues? Any insight greatly appreciated! Thanks!
Welcome to the Apple Community.
First you should try logging out of your iTunes Store account (settings > iTunes Store > accounts) and then back in again.
If that doesn't help, try resetting the Apple TV (Settings > General > Reset > Reset all settings). You should also try restarting your router.
If both of the above don't help, you should try a restore (Settings > General > Reset > Restore). -
i tray to reinstall i tunes in my pc after having error 7, but wyle in the instalation this mesage appear said service apple mobile device failed to star. verefy that you have suficient privileges to star system services.
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, does an iTunes install go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
I am putting together a slide show using iphoto and I wanted to add a description on each slide/photo. How can I do that? Also on the choice of music for the silde show, if the slide show is longer than one song can you chose a different song for background music?
This might help
http://www.apple.com/findouthow/photos/#slideshow
Regards
TD -
I am trying to download ITunes. I get the message during starting services - Service "Apple Mobile Device" failed to start. Verify that you have sufficient privileges to start system services. How do I verify? How do I complete the installation?
Does anyone knows how to fix this problem?
-
i installed iOS6 on my iphone 4 than i erased the iphone setting accidentally what can i do to bring back to work the iphone ? cause it says you;r not a developer ?
If you are not a registered developer, you are a thief. Pay to join the developers program so you can take this to the developers forums or wait for the final release in the fall.
And don't mess around with beta software you're not entitled to. -
My Mac has stopped playing you tube asking me to update flash player trouble is it is asking me for a password and I don't ever recall setting a password for this mac …!!!!
When the Mac was setup you had to create an administrative password.and account. Yo have to sign into that account to install apps/plug-ins like Flash. To reset that password.
Forgot Mac Password? How to Reset Your Mac Password (with or without CD)
Change the Admin Password with Mac OS X Single User Mode
Reset mac mini admin password: Apple Support Communities -
I have a new iPhone 5s. When I try to sync it with my iTunes account it is unable and advises to update iTunes to version 11.1. Whn I attempted this iTunes advised that the current version I have (10.6.3) is the most up to date!
If you're on a Mac, you need to upgrade it to Mac OS X 10.6.3 and then 10.6.8, which requires that it has an Intel CPU and at least 1GB of RAM.
(100999) -
I tried to use the Browse button on the left pane to go to a server which has my local copy so that I can FTP to ISP, but I get a window saying there is a permissions issue. How do I resolve?
If it has a cloud icon it means its no longer on your device. Tapping on the cloud will effectively reinstall the App from scratch to your device.
There is no way to remove it from the cloud because its not yours to remove from there. Its the general App repository, you are just given access to it to download content you've already purchased. -
Hi I have just purchased an i pad for my wife and have registered it in my name to add some apps prior to giving the i pad to her. However, for using face time and games where you can link via wifi it will look as though there are two of the same, if I am trying to link her ipad to mine. How do you get around this?
Assign an email address (gmail.com?)
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
Hello, I am having trouble re-installing itunes on my PC. error message keep popping up "Apple mobile device failed to start, verify that you have sufficient privileges to start system services.
The thread mentioned above now has some out of date direct links. This is a more recent version of that post...
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
Hi, i have purchased iPhone 5 about 15 days ago, its working well but only one problem that it has is that some time its losting signal and appear as no serves. would you please help me in this reqard. thanks
Well, it could be that your carrier doesn't have a signal when it looses its signal. You could try resetting network settings which might help - Settings/General/Reset/Reset Network Settings. You'll need to set up any wi-fi networks you connect too again. If you're still having issues, contact your carrier.
Good luck! -
Do you have to enter credit card info to set up an apple id acct? even if I am only using for free downloads and never intend to purchase anything?
If you have already created the Apple ID, yes. You can add the card - it will authorize $1.00 (USD) which will be released. At that point, you can then change the payment method to None - Then done.
If you would rather create a different appleID without a credit card, follow the instructions here: http://support.apple.com/kb/HT2534 -
We have tried several times to restore the iphone but it keeps telling us that this is corrupt and try again later.
Hi meekboy3,
Thanks for visiting Apple Support Communities.
You may want to try restoring again after placing your phone into recovery mode:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Best,
Jeremy -
I have purchased the Acrobat pro subscription for 1 year and have followed the steps to install it. But when i go to start it, It crashes and it does this every time! I have restarted my mac pro and also restarted in safe mode but it just doesn't work! PLEASE HELP!!
Hi jim1287,po
Check for the latest updates. Installing latest updates should resolve this problem.
Also, try to ran disk repair using safe mode in Mac, for instructions please visit: http://support.apple.com/kb/PH14204
Try enabling root user profile on mac and try to check. OS X Mavericks: Enable and disable the root user
Regards,
Ajlan Huda.
Maybe you are looking for
-
Issue while posting XML to BAPI_LEAD_CREATE
I am stuck while trying to HTTP post an XML to Gateway Service which calls the BAPI_LEAD_CREATE in SAP CRM. The request is posted from the REST CLIENT In Firefox and i get an non descriptive HTTP 400 error in response <?xml version="1.0" encoding="u
-
I recently bought this phone on 25th day of Octuber 2013. And 17 days earlier while using the phone it suddenly restarted itself then never detects any sim card. After that I checked the sim card, cleaned it with a cloth and reinserted it in the phon
-
Windows 7 client won't connect with 802.1x security
Having issues connecting a windows 7 dell laptop with cisco unified wireless infrastructure. Currently running 4 4402 WLCs and 1 wism. The client in question is trying to connect to an AP that sits on one of the controllers on the wism. WLC code r
-
Good morning all, I need some help achieving the following in our Exchange 2013 Environment. First off, we have Exchange 2013, but all our clients have Outlook 2010. Here's what I would like to be able to do: 1) create/manage public calendars / room
-
How can i get names of buttons in radio group
Could you please help me in the matter that by giving the name of radio group, we can get the names of the radio buttons in that group. Thanks for Help, Riaz Ahmad