Using a dropdown box to change the specified value of a radio button?

I have a form that generates the body text for an email.
First there is a dropdown box in which the choices are either "red" or "blue"
Further down the page, there is a radiobutton list with 2 items "available" and "unavailable".
The specified values for these items (as defined on the binding tab) are "have blue hats" or "do not have blue hats".
This value is concatenated in the email body textfield which is to be copied by the user to an email body:
Concat("Dear", NameField, "," We ", RadioButtonList, " today. ") // Dear Persons Name, We have blue hats today.
Is there any way to change the value of the selected radio button based on the selected dropdown choice?
So if the user selected "red" in the dropdown field, the radio button values could become "have red hats" or "do not have red hats"?
Or perhaps there is a better way from the start?
Thanks!

Ok, so now I've done that...
But is there a way to change that value with another field (ie when a user chooses "red" or "blue" in a dropdown box) so that the concatenated message reflects both the users choice of color and the availibility?
I'm guessing I should probably use an intermediary text box and put
InterText.rawValue = Concat ("We have ', dropdown1, " hats today") in the change event of the available radio button and:
InterText.rawValue = Concat ("We do not have ', dropdown1, " hats today") in the change event of the unavailable radio button.
then concatenate that box in the final textbox.

Similar Messages

Changing The Text Color In a Radio Button Component

Hi,
I'm using a background in my frame , so I need to know how
to change the color of the Radio Button Component. I tried using
the Property Inspector , but in that the color option is disabled.
The Flash version I'm using is Flash 8. Kindly provide me a
solution for this.
Thanks In Advance,
Lokesh R

There's a topic about this in the Flash help, about changing
components. You need to edit the file inside your Flash
installation folder, and make a copy of it to your liking.
But about radio buttons: is there any way to include them in
your project while maintaining the possibility of on(Keypress)
events?

What is the use of dropdown box in wad in bi-7

what is the use of dropdown box in wad in bi-7

Hi,
Dropdown box in WAD is for changing the output of full or particular part of template at runtime.
For Eg. suppose u have states in dropdown box and u want the output of according to particular state then u select that state from dropdown box. so the output comes accordingly.
For doing these u have to assign a data provider to dropdown box which query give the output of states. and in the property of dropdown box u hav to assign the item which will affect by this dorpdown box.
I think it will help u.
Assign Point if it helps.
Regards,
Ravi

I just did the photoshop camera raw update and now everytime I try to do a text box or change the text the whole program crashes.

I just did the photoshop camera raw update and now every time I try to do a text box or change the text the whole program crashes.

All fixed!!! My Aperture wasn't being recognized because it was in a folder. OK, now I can use my camera with Aperture.

Using Cascading Dropdown Boxes

hi all:
how to using Cascading Dropdown Boxes in visual composer?

not clearly understand what i mean?
for example there are two drop-down list,when I choose one for product group ,then in the second one only i can choose the product of the group i choose.

I have 5 html pages that share a common header, footer, and sidebar. how do i use my nav bar to change the content of the body without duplicating a lot of code?

i have 5 html pages that share a common header, footer, and sidebar. how do i use my nav bar to change the content of the body without duplicating a lot of code? thank you!

i inherited the website. It’s for a non-profit and is not very
sophisticated, and neither am I in webdesign. It currently has multiple
pages that are identical except for that body section, so whenever i change
the navigation (in the sidebar) I have to update every html page. I want
to have one basic page, and just call in the different body content based
on the link the user selects from the nav bar. How can i do that using a
script? i am using Dreamweaver.
~ in love and light ~
Jeannie
On Sat, Feb 7, 2015 at 4:07 AM, Ben Pleysier <[email protected]>

My old itunes id was an email that no longer can be used, therefore, I can not change the password for that account. Everything that I purchased under that id name will not play. How can I fix this?

My old itunes id was an email that no longer can be used, therefore, I can not change the password for that account. Everything that I purchased under that id name will not play. How can I fix this?

I no longer have an email address that was also my Apple ID. Can I still use the email address as my Apple ID?
Apple recommends you change your Apple ID to your current, working email address. This will not create another Apple ID, it will only change it to your working email address. See Changing the name you use for your Apple ID if you'd like more information.
Note: @mac.com and @me.com Apple IDs can not be renamed. If you no longer use the .mac or .me email address be sure to add your valid email address as an additional email address.
From here > http://support.apple.com/kb/HT5622?viewlocale=en_US
If necessary...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

CS6 - Pattern making. How can I use a bounding box to define the pattern size?

I want to create a pattern in cs6. As in the previous versions of illustrator, I'd like to be able to use a bounding box to tell the computer where I want the pattern to start etc. In cs6 I can't seem to be able to do this. Once I hit 'make pattern' the bounding box is different and it becomes really difficult to define where I want the pattern to start. The pattern making part of illustrator seems to get confused and ends up throwing out my pattern completely. Any ideas?
Thanks!

Zehgut,
Create a nofill/nostroke rectangle where you want to have the boundaries, then move it down beneath the artwork in the Layers palette and include it in the swatch. That is the way to define the boudaries.

Where do I find the printer dialog box to change the setting that asks me to save a file before printing

Where do I find the printer dialog box to change the setting that asks me to save a file before printing

Hi Sara,
The problem is every time I try to copy a page from a website or attachment sent to me or anything that I don't create, the dialog box says I have to save it before I can print -- there are no other options on the dialog box. Very frustrating -- one of the girls in my office is having the same problem and we can't find a way around it.
Hope you can help
Thanks
Carol Laskos
"Sara.Forsberg" <[email protected]> wrote:
Sara.Forsberg created the discussion
"Where do I find the printer dialog box to change the setting that asks me to save a file before printing"
To view the discussion, visit: https://forums.adobe.com/message/7070517#7070517
>

Problem changing the Condition Value in Po using BAPI_PO_CHANGE

Hi Experts,
My issue is BAPI_PO_CHANGE is not changing the Condition value. and giving message in bapi return as 'cannot be processed manually'.
Can anybody please help me on this.
Thanks & Regards,
Sudheer

Check this link http://forums.sdn.sap.com/thread.jspa?threadID=652278
Regards,

Can you change the checkbox value and the caption fontColor in the same checkbox field?

There was a discussion last March where the discussion creator wanted to change the caption text on a checkbox. And the response used a separate check box to change the fontColor in a different text field.
Is it impossible to manipulate the color of the check mark and the caption in the same field?
It would make something I'm doing a lot easier if it was possible.
Thanks,
Christina

Not sure how you created the field. In the object library under the custom group there is a Current Date field object. It's basically a text field that has some script behind it. Drop it on your form and instead of setting the runtime property, leave the "Calculation Script" radio button selected. It should display the date as M/D/YY, in the format of the selected locale. If you need to use a different format then you need to change the script that's automatically generated behind the scenes (it'll be in the ready:layout event for the field). BTW, selecting Runtime Property also generates a script, it's just different and formats the date as you see it. Either way you need to modify the script to change it.
If you need help with the scripting, post the format that you want the date in.

How can I change the initial value of the field approve_or_reject?

Hello Workflow Gurus
We are using SRM 5.00(SRM SERVER 550) and as per the requirement, I have to make the Reject radio button as default checked on the Approver's screen.
We are using the SAP Standard Workflow WS14500015.
I found out the Standard task TS14508044 (SC approval per Item)which has one field in its container i.e. approve_or_reject ,based on the Initial value of this field , the radio button is behaving...
approve_or_reject EQ 0 i.e. Approve
approve_or_reject EQ 1 i.e. Reject
Now my requirement is to change the initial value of this field from 0 to 1 so that Reject radio button comes as checked by default into this standard SAP workflow task TS 14508044...
Kindly help me and let me know the procedure to change this.
PLEASE LET ME KNOW THAT IS IT WISE TO MAKE THE CHANGES INTO STANDARD SAP WORKFLOW ???
Thanks and regards
Ankur Goyal
09823448654

Well Iam not much sure about how you are trying to approve the shopping cart workitem b ut last week i faced a similar issue while apporving the workitems I was able to update the contianer element Apporve_or_reject element by using the FM BBP_PDH_WFL_WI_APPROVE and BBP_PDH_WFL_WI_REJECT ... These two fm will take the responsibility of updating the element with respective value as, if you approve the it will be populated with 0 and if you reject the the element will be updated with 1....
Please check the thread where I updated the thread in [SRM Workflows|Problem while approving SC from Blackberry !;
PLEASE LET ME KNOW THAT IS IT WISE TO MAKE THE
CHANGES INTO STANDARD SAP WORKFLOW ???
Modifying the standard workflow is not recommended.....

How can I change the default value of a command ?

I want to be able to change the default value of a comand when the vi
is running. (I know how to do that with a right click when the vi is
not running).
In fact I would like the user of the vi to be able to choose a new default value for a command.
How can I do that ?

You can't do this on a running VI. If you have an idle VI, you can open a reference to that VI and use an invoke node with the Make Current Values Default method, but that will only work in LV (i.e. not in an EXE) and will affect all the controls. What you can do is save the values to a file and load them when the program starts. OpenG's File I/O package includes some VIs which will help you with that.
Try to take over the world!

Is it possible to change the display value of a domain-based attribute?

Hello,
I've selected a domain-based attribute for one of the leaf member attributes in the same entity, aka parent id, since it's a self-referencing entity. However, I cannot find a way to display anything but the code value in the drop-down (see below).
Is there a way to change the display value so that I can choose the attribute from the entity from which I want the user to choose? In other words, I would like to display the hierarchy name instead of the code, which is really just the primary id.
Thanks in advance!
Ben Lezin

1. In the explorer page, settings dialog, you can change the display format to show only name.
2. We cannot use other freeform attribute as DisplayFormat, rather than Code Name. So there are 2 option here:
a. Remove HierarchyName attribute and just use Name attribute. In the next release, we will allow give Name, Code attribute a displayname, so you can give Name display name as "HierarchyName" in the SQL Vnext release.
b. Make a Business Rule to update Name when HierarchyName is changed.

How to change the variable value in fox formula?

Hi All,
    Please help me achieve this scenario,
         in the variable selection screen , i wil give some i/p like, calyear(0calyear) = 2008.
      In planing function using FOX formula, i must be able change the variable value to 2009.
Will it be possible to achieve this, can we change a variable value using FOX formula, if possible
please let me knw how to achieve this.
Thanks n Regards,
Priya.

Hi Priyadarshini,
i dont know what is your requirement exactly.If you can give a better explanation of ur requirement we can help you. But to answer your question yes we can get new values for the variable in the planning function.
for this you need to couple the planning function together with the planning filter in a planning sequence. This planning filter should have the variable that you wanted to change. In the WAD when you want to call this planning sequence there is an option to call variable screen. If you enable this, it will pop up the variable screen to get this value again.
Guess this was helpful.
Regards.
Shafi.

Using a dropdown box to change the specified value of a radio button?

Similar Messages

Maybe you are looking for