Using a waveform graph, how to get all recorded data graphed?

I record data from 6 channels using DAQmx with simulated channels and write to measurement file. Then using read from measurement file, and waveform graph, I am trying to graph the data that has been recorded. I am only getting a small amount graphed. The same graph appears whether I have let the measure and record program run for 1 minute or for ten minutes. It also displays a time at the end of the graph that is in the future. What am I doing wrong? Please help.
Hillis Pratt, Jr.

I am attaching the two VIs I have been trying to use. I started with examples from NI and didn't go far from that. Any assistance would be appreciated.
Attachments:
Measure and Record Six Voltages with Express1.vi ‏119 KB
Graph Measurement Files1.vi ‏89 KB

Similar Messages

How to get all the data stored on a table?

Hi.
I'm tryng to get all the data stored on a database table but I'm losing in trouble. I've looked for a soloution to my problem in the forums but each post I follow related to this issue gives me a different way to solve the problem and no one works :(
I suppose I have to call the getAllRowsInRange() method from my ViewObject class. But how can I get an instance of my ApplicationModule in order to get the corresponding ViewObject?
I think I messed my head a lot.
Could someone help me please?
Thanks in advance.

Thanks for your answer.
However, there are some things that I don't understand. I will look the book but why is necessary to create another ApplicationModule? The fact is that my application just have one ApplicationModule.
Apart from that, I have tried your suggestion and I've obtained the quite little friendly response that follows:
javax.faces.FacesException: #{backing_pruebaFilas.commandButton1_action}: javax.faces.el.EvaluationException: oracle.jbo.ConfigException: JBO-33001: No se ha encontrado el archivo de configuración /DatosViewObj/common/bc4j.xcfg en classpath
     at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:98)
     at javax.faces.component.UICommand.broadcast(UICommand.java:332)
     at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:287)
     at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:401)
     at com.sun.faces.lifecycle.InvokeApplicationPhase.execute(InvokeApplicationPhase.java:95)
     at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:245)
     at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:110)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:213)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.1) ].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:228)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:197)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:123)
     at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:103)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.1) ].server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:162)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.1) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:620)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.1) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:369)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.1) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:865)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.1) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:447)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.1) ].server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:215)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.1) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.1) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.1) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
Caused by: javax.faces.el.EvaluationException: oracle.jbo.ConfigException: JBO-33001: No se ha encontrado el archivo de configuración /DatosViewObj/common/bc4j.xcfg en classpath
     at com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:150)
     at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:92)
     ... 24 more
Caused by: oracle.jbo.ConfigException: JBO-33001: No se ha encontrado el archivo de configuración /DatosViewObj/common/bc4j.xcfg en classpath
     at oracle.jbo.client.Configuration.loadFromClassPath(Configuration.java:367)
     at oracle.jbo.common.ampool.PoolMgr.createPool(PoolMgr.java:284)
     at oracle.jbo.common.ampool.PoolMgr.findPool(PoolMgr.java:539)
     at oracle.jbo.common.ampool.ContextPoolManager.findPool(ContextPoolManager.java:165)
     at oracle.jbo.client.Configuration.createRootApplicationModule(Configuration.java:1498)
     at oracle.jbo.client.Configuration.createRootApplicationModule(Configuration.java:1476)
     at view.backing.PruebaFilas.commandButton1_action(PruebaFilas.java:100)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:146)
     ... 25 more
At that point, I think a better explanation of my purpose could be helpful. What I'm trying to do is just create a simple page with a command button, and in its action method get all the data stored in the rows of the table. I've seen a possible solution that I understand:
DCIteratorBinding iter = getIterator("DatosViewObj1Iterator");
System.out.println("Iterator Binding: "+iter);
int startRange = iter.getRangeSize();
iter.setRangeSize(-1);
Row[] rows = iter.getAllRowsInRange();
iter.setRangeSize(startRange);
but the problem is that I don't know what is the class the method getIterator belongs to.
Could you help me with this last piece of code? If not, I accept, of course, any suggestion. I am absolutely stuck.
Thanks and regards.

How to get all records using Invoke-webrequest?/Why Invoke-webrequest returns only first 2000 Records?

invoke-webrequest content returning only 2000 records though it has around 4000 records in web api.
The same url if I give in excel oData Data feed I am getting all the records.
See the below script
Script:
$QueryResult= (Invoke-WebRequest -Uri $ODataURI -UseDefaultCredentials)
[xml]$xmlResult=$QueryResult.content
foreach($obj in $xmlResult.feed.entry.content.properties)
$Name=$obj.Name;
$IsAvail=$obj.isAvail.'#text';
$PGroup=$obj.PGroup
I am exporting the above result as a CSV file and my CSV file contains only 2000 records.
But, $xmlResult.feed.Count --> it Shows 4000 Records.
The same Odata url if I give in excel oData Data feed I am getting all the 4000 records.
So Please help me how can I get all the records using power shell.
Thanks
A Pathfinder..
JoSwa
If a post answers your question, please click "Mark As Answer" on that post and "Mark as Helpful"
Best Online Journal

Hi Jo Swa(K.P.Elayaraja)-MCP,
Would you please also post code which is used to export the records?
In addition, to use the cmdlet invoke-RestMethod to work on ODate feeds, please refer to this article:
Interacting with TechEd NA 2012 Schedule using PowerShell v3
I hope this helps.

How to get all records created this month?

Ok I'm trying to write a query that would get records that were created this month or later but not in the past.
So today is Nov 16th 2009
I need to look for all records created from 11/2009 and onward (>11/2009)
Any ideas?

Do you have any field like "create_date" on that table ? Here is simple qry
with t as ( select 1 as id,to_date('01-OCT-2009','DD-MON-YYYY') as create_date from dual
UNION
select 2,to_date('11-OCT-2009','DD-MON-YYYY') from dual
UNION
select 3, to_date('02-NOV-2009','DD-MON-YYYY') from dual
UNION
select 4, to_date('01-NOV-2009','DD-MON-YYYY') from dual
UNION
select 5, to_date('13-DEC-2009','DD-MON-YYYY') from dual)
select * From t
where CREATE_DATE >= trunc(sysdate,'MON')Edited by: rkolli on Nov 16, 2009 1:23 PM

How to get all records of 0041 for a given PERNR

I have to display Most Recent Hire and Original Hire date.
So I am using this below code:
0041 - Date Specifications
    rp_provide_from_last p0041 space pn-begda pn-endda.
    IF pnp-sw-found EQ '1'.
      MOVE: p0041-dat01 TO wa_final-dat01,
            p0041-dat03 TO wa_final-dat03,
            p0041-dat02 TO wa_final-dat02.
But for few PERNRs we are having wrong data and below is the explanation from my functional guy:
I figured out the above when I ran the report for all employees and noticed some dates were out of sequence. The reason for the code change is because Payroll has to input NR in the P0041-DAR** field (used in payroll calculations to allow additional contributions to Savings Plans for employees who are near retirement) and it automatically places this future retirement date in P0041-DAT01.
So if I see at PA0041 for a given few PERNRS, am having couple of records and the last record is for the retirement calculations and hence am getting wrong dates into my display. I need the first record for this kind.
Thanks
Kiran

Hi,
here is the piece of code using field symbols for accessing dates from pa0041....
FIELD SYMBOLS
FIELD-SYMBOLS:<f_dar01> TYPE ANY,
                        <f_dat01> TYPE ANY,
                         <f>       TYPE ANY.
form read_pa0041 .
DATA:    l_date               TYPE dardt,
           l_date_type          TYPE datar.
CLEAR : v_data ,
          v_date ,
          v_days .
v_cnt = 1.
DO 12 TIMES.
    CONCATENATE 'p0041-dar' v_cnt INTO v_data.
    CONDENSE v_data NO-GAPS.
    ASSIGN (v_data) TO <f_dar01>.
    IF <f_dar01> = 'U5'.
      CONCATENATE 'p0041-dat' v_cnt INTO v_data.
      CONDENSE v_data NO-GAPS.
      ASSIGN (v_data) TO <f_dat01>.
      v_date = <f_dat01>.
      EXIT.
    ENDIF.
    v_cnt = v_cnt + c_1.
ENDDO.
then you can use the date fetched in v_date as per your requirement..
IF NOT v_date IS INITIAL.
I hope u will get some help
Thanks & Regards
Ashu SIngh

How to get all records from department wise having max salary?

i have a Employee table which consist
id | name | dept_id | Salary
1 A 1 20
2 B 1 25
3 C 2 30
4 D 2 25
Search max salary department wise with all details like below result.
id | name | dept_id | Salary
2 B 1 25
3 C 2 30

Could you try this?
create table employee (id int, name varchar(10), dept_id int, salary int)
insert into employee values (1,'A',1,20)
insert into employee values (2,'B',1,25)
insert into employee values (3,'C',2,30)
insert into employee values (4,'D',2,25)
select e.* from employee e inner join
(select a.dept_id , max (a.salary) as 'max_salary' from employee a
group by a.dept_id ) b
on e.dept_id = b.dept_id
and e.salary = b.max_salary
order by e.dept_id
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

How get all record from master and matching record from detail

hi master
sir i have master detail table
i have many record in master table but some record in detail table how i get
all record from master and matching record from detail
such as
select m.accid,m.title,d.dr,d.cr from master m, detail d where m.accid=d.accid
this query not work that get only related record i need all record from master
please give me idea
thanking you
aamir

hi master
sir i have master detail table
i have many record in master table but some record in
detail table how i get
all record from master and matching record from
detail
such as
select m.accid,m.title,d.dr,d.cr from master m,
detail d where m.accid=d.accid
this query not work that get only related record i
need all record from master
please give me idea
thanking you
aamir
select m.accid,m.title,d.dr,d.cr
from master m, detail d
where m.accid=d.accid (+)The outer join operator (+) will get you all the details from master and any details from the detail if they exist, but the master details will still be got even if there are not details.
Note: Oracle 10g now supports ANSI standard outer joins as in:
select m.accid,m.title,d.dr,d.cr
from master m LEFT OUTER JOIN detail d on m.accid=d.accid

How to get all previous versions page contents of a publishing page using SharePoint Client Object Model 2010

How to get all previous versions page contents and other field values of a publishing page using SharePoint Client Object Model 2010?
Thanks,
Osmita

Hi Osmita,
Greetings.
Here are the links that helps you. It has code attached to it.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/a0d2ab40-99ba-4368-8505-1dc559ef6469/get-content-of-previous-version-of-page-sharepoint-2010?forum=sharepointgeneralprevious
http://social.technet.microsoft.com/Forums/sharepoint/en-US/faaf419f-997e-4150-9911-48cc375c3b46/how-to-get-previous-published-versions-of-publishing-pages-in-sharepoint-2010?forum=sharepointdevelopmentprevious
Please remember to click 'Mark as Answer' on the answer if it helps you

How to get all rows in table to red using alternate rows properties option

How to get all rows in table to red using alternate rows properties option

Hi Khrisna,
You can get all rows red by selecting the color red in the "Color" and "frequency" to 1 under the "Alternate Row/Column colors".
I tried doing it and the colors freaked me out (all red) :-D
Kindly tell me if im missing something.
Regards,
John Vincent

How to get all rows that are returned in inner sub query of select statemen

If a sub query in select statement returns more than one row than how to get all those returned rows in the final
output of the query .It will be all right if all column's value repeat and that multiple output of inner query comes
in another column .
How to get that ?

As Frank said, you likely want a join, and likely an outer join to replicate the select in the projection. Something like:
SELECT id,stat, section, USER_ID concerned_person
FROM table_all,
left join table2
    on room_id = sectoion and
       sur_role = 'r001'
WHERE section IN (SELECT code
                  FROM t_area
                  WHERE dept= 'p002')An alternative, depending on where and how you are using the statement would be something like:
SQL> WITH t AS (
2    select 1 id from dual union all
3    select 2 id from dual),
4 t1 as (
5    select 1 id, 'One' descr from dual union all
6    select 1, 'Un' from dual union all
7    select 1, 'Une' from dual)
8 SELECT t.id, CURSOR(SELECT t1.id, t1.descr from t1
9                      WHERE t1.id = t.id)
10 FROM t;
                  ID CURSOR(SELECTT1.ID,T
                   1 CURSOR STATEMENT : 2
CURSOR STATEMENT : 2
                  ID DESCR
                   1 One
                   1 Un
                   1 Une
                   2 CURSOR STATEMENT : 2
CURSOR STATEMENT : 2
no rows selectedJohn

How to get all the values from the dropdown menu

How to get all the values from the dropdown menu
I need to be able to extract all values from the dropdown menu; I know how to get all those values as a string, but I need to be able to access each item; (the value in a dropdown menu will change dynamically)
How do I get number of item is selection dropdown?
How do I extract a ?name? for each value, one by one?
How do I change a selection by referring to particular index of the item in a dropdown menu?
Here is the Path to dropdown menu that I'm trying to access (form contains number of similar dropdowns)
RSWApp.om.GetElementByPath "window(index=0).form(id=""aspnetForm"" | action=""advancedsearch.aspx"" | index=0).formelement[SELECT](name=""ctl00$MainContent$hardwareBrand"" | id=""ctl00_MainContent_hardwareBrand"" | index=16)", element
Message was edited by: testtest

The findElement method allows various attributes to be used to search. Take the following two examples for the element below:
<Select Name=ProdType ID=testProd>
</Select>
I can find the element based on its name or any other attribute, I just need to specify what I am looking for. To find it by name I would do the following:
Set x = RSWApp.om.FindElement("ProdType","SELECT","Name")
If I want to search by id I could do the following:
Set x = RSWApp.om.FindElement("testProd","SELECT","ID")
Usually you will use whatever is available. Since the select element has no name or ID on the Empirix home page, I used the onChange attribute. You can use any attribute as long as you specify which one you are using (last argument in these examples)
You can use the FindElement to grab links, text boxes, etc.
The next example grabs from a link on a page
Home
Set x = RSWApp.om.FindElement("Home","A","innerText")
I hope this helps clear it up.

How to get all users under an organizations?

Hello everyone.
Just want to know if anyone knows how to get all users under a particular organization.
From the Search User form, I found they may kind of user such attribute conditions:
MemberObjectGroup
is in
XXXX(organization)
But unfortunately, the "is in" is not a valid AttributeConditionOperator, so besides using "recursive" self-written function, anyone knows any possible buit-in trick?

Here is my solution:
<Rule'>
    <RuleArgument name='organization'/>
    <RuleArgument name='context'/>
    <block>
        <defvar name='orgs'>
            <new class='java.util.ArrayList'/>
        </defvar>
        <invoke name='getChildObjectGroupNames'>
            <invoke name='getObject' class='com.waveset.ui.FormUtil'>
                <ref>context</ref>
                <s>ObjectGroup</s>
                <ref>organization</ref>
            </invoke>
            <ref>orgs</ref>
        </invoke>
        <append name='orgs'>
            <ref>organization</ref>
        </append>
        <invoke name='getUsers' class='com.waveset.ui.FormUtil'>
            <ref>context</ref>
            <map>
                <s>conditions</s>
                <list>
                    <new class='com.waveset.object.AttributeCondition'>
                        <s>MemberObjectGroups</s>
                        <s>in</s>
                        <ref>orgs</ref>
                    </new>
                </list>
            </map>
        </invoke>
    </block>
    <MemberObjectGroups>
        <ObjectRef type='ObjectGroup' id='#ID#Top' name='Top'/>
    </MemberObjectGroups>
</Rule>

How to get all INDEXes from a database

How to get all INDEXes in a database? I need to store them in script file (.SQL). My database version is 10.2.0.3.0.
Edited by: Iniyavan on Sep 18, 2009 1:39 PM

--Thanks, Koppelaars. The second query works. But I'm unable to store in spool file. May be it's due to CLOBs in the output. I did the following:
set head off
set feedback off
set linesize 32727
set pagesize 50000
spool c:\indexes.sql
select dbms_metadata.get_ddl('INDEX',INDEX_NAME,'MYSCHEMA')
from user_indexes;
spool off
--In the spool file, I find only this
CREATE UNIQUE INDEX "MYSCHEMA"."A" ON "MYSCHEMA"."BNK_DEALID" ("DEAL_ID")
PCTF
CREATE INDEX "MYSCHEMA"."ACCENT_RAC_REPORT" ON "MYSCHEMA"."ACCENT" ("SCHEME", "VAL
CREATE INDEX "MYSCHEMA"."ACCENT_REPORT" ON "MYSCHEMA"."ACCENT" ("SCHEME", "APP_REF
CREATE UNIQUE INDEX "MYSCHEMA"."ACCENT_X" ON "MYSCHEMA"."ACCENT" ("DEAL_ID")
P
CREATE UNIQUE INDEX "MYSCHEMA"."ACCNAV_X" ON "MYSCHEMA"."ACCNAV" ("SCHEME", "ACCNA
--How to get all the DMLs in one SQL file?
--Nagappan, I'm using WIN.

How to get ALL validate-errors while insert xml-file into xml_schema_table

How to get all validate-errors while using insert into xml_schema when having a xml-instance with more then one error inside ?
Hi,
I can validate a xml-file by using isSchemaValid() - function to get the validate-status 0 or 1 .
To get a error-output about the reason I do validate
the xml-file against xdb-schema, by insert it into schema_table.
When more than one validate-errors inside the xml-file,
the exception shows me the first error only.
How to get all errors at one time ?
regards
Norbert
... for example like this matter:
declare
     xmldoc CLOB;
     vStatus varchar
begin
-- ... create xmldoc by using DBMS_XMLGEN ...
-- validate by using insert ( I do not need insert ;-) )
     begin
     -- there is the xml_schema in xdb with defaultTable XML_SCHEMA_DEFAULT_TABLE
     insert into XML_SCHEMA_DEFAULT_TABLE values (xmltype(xmldoc) ) ;
     vStatus := 'XML-Instance is valid ' ;
     exception
     when others then
     -- it's only the first error while parsing the xml-file :
          vStatus := 'Instance is NOT valid: '||sqlerrm ;
          dbms_output.put_line( vStatus );
     end ;
end ;

If I am not mistaken, the you probably could google this one while using "Steven Feuerstein Validation" or such. I know I have seen a very decent validation / error handling from Steven about this.

How to get all the values from a HashMap? thanks

hi
can anyone tell me how to get all the keys and their values contained in a HashMap? thanks

thanks to u all for ur response, i gues if i need to get both keys and values, i need to use keySet() to get a set of keys first and then using each key to get value. is there any other faster way to get both of them (key and value)? thanks again

Using a waveform graph, how to get all recorded data graphed?

Similar Messages

Maybe you are looking for