Using Acrobat Standard 9 Adding Check Boxes

Have been using AA Std 9 for some time and all of sudden I cannot use the add check boxes to forms with any accuracy. It is not an issue with the mouse. Have downloaded patches but still cannot add fields where they need to be. Major impact on productivity! Ideas?

I do have Internet Explorer 9 and I was able to print web pages correctly following your suggestions.
Thanks for your help.
Date: Sat, 12 Nov 2011 06:53:59 -0700
From: [email protected]
To: [email protected]
Subject: Printing web page to pdf file using Acrobat Standard 9
    Re: Printing web page to pdf file using Acrobat Standard 9
    created by Bill@VT in Acrobat Windows - View the full discussion
There were problems with IE9 on it's initial release and that may be what you are seeing if that is the browser (you did not indicate the browser and that may be a key). If you have a different browser you might try that one with the same pages to see if it browser related.
By saying garbled it sounds like the fonts did not make it or you have selected "Use Local Fonts" in Acrobat. Try checking the latter first. Then check if the fonts are embedded in the PDF by checking the document properties (ctrl-D). If they are not, go back to the browser and select the press or print job options before printing and see if they get embedded and if your problem is resolved.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4021509#4021509
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4021509#4021509. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Acrobat Windows by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Similar Messages

Printing web page to pdf file using Acrobat Standard 9

When I print a web page to a pdf file, the text in the file is mostly garbled. I have no problems in creating pdf files from MS office or other software. I have Windows 7 Home.
Any help will be appreciated.
Thanks

I do have Internet Explorer 9 and I was able to print web pages correctly following your suggestions.
Thanks for your help.
Date: Sat, 12 Nov 2011 06:53:59 -0700
From: [email protected]
To: [email protected]
Subject: Printing web page to pdf file using Acrobat Standard 9
    Re: Printing web page to pdf file using Acrobat Standard 9
    created by Bill@VT in Acrobat Windows - View the full discussion
There were problems with IE9 on it's initial release and that may be what you are seeing if that is the browser (you did not indicate the browser and that may be a key). If you have a different browser you might try that one with the same pages to see if it browser related.
By saying garbled it sounds like the fonts did not make it or you have selected "Use Local Fonts" in Acrobat. Try checking the latter first. Then check if the fonts are embedded in the PDF by checking the document properties (ctrl-D). If they are not, go back to the browser and select the press or print job options before printing and see if they get embedded and if your problem is resolved.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4021509#4021509
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4021509#4021509. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Acrobat Windows by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Is it possible to use Acrobat 9 sdk to check accessibility?

Is it possible to use Acrobat 9 sdk to check accessibility of a pdf and get whether the pdf is accessible or not?
I've found InvokeAccessibilityCheckerCmdSnip.cpp that seems to call accessibility validator, but I don't know if that will make what I need.
I've been asked to include an accessibility validation utility in a Content Server after loading a pdf.
Thanks in advance.

Post your question in the 'Acrobat Developers SDK' forum.

Impossible to use Acrobat Standard XI

Once open, Acrobat Standard 11.0.08 crashes after a couple of second.
I receive a msg box with (see capture below).
Same result with new installation and updates from 11.0.0 to 11.0.08.
I use a Sony VAIO (Windows 8.1 - French, 8GB of memory).

Hi clean_be,
Please try the steps below:
Delete all the files from following folders:
C:\ProgramData\Adobe\SLStore
C:\Program Files (x86)\Common Files\Adobe\SLCache
And, delete all files from following folder except cache.db
C:\Program Files (x86)\Common Files\Adobe\ Adobe PCD
Then launch Acrobat, Accept EULA and enter the serial number again and check.
Regards,
Rave

I have two pc, one with windows 7 professional and another with windows 8.1. I'm the only owner and user of both. One works with 32 bits and the other (windows 8.1) , 64 bits. Can I use acrobat standard XI in both pc's being the only usuary?

Just in case. I have two pc's one with windows 7 professional (32 bits) and another with windows 8.1 (64 bits). Can I use, with one license, as I'm the owner and only user, acrobat standard XI?. Thank you in advance
Francisco

Yes, the license allows 2 installs for the owner's personal use. You can check this in the license agreement if you wish.

Using Javascript to disable a check box

Friends,
I am stuck on what should be a simple requirement and I am hoping you can help.
I need to disable a form region checkbox if a field on the same form region has anything entered.
What I have done so far is:
1) On the item that determines whether the check box should be disabled I have added a call to my Javascript function "onChange="disableDefaultDisplay();" in the "HTML Form Element Attributes"
2) My javascript funcion is: (this is the basic version, all I am trying to do is disable the check box at this point)
function disableDefaultDisplay()
alert("Start of the function");
var defaultDisplay = document.getElementById("P13_DEFAULT_DISPLAY");
*defaultDisplay.enabled = false;*
alert("End of the function");
Using a combination of firebug and the alert messages I can see that function is called at the correct time (i.e. when the user changes and then leaves the field) and that the values of the variable, defaultDate are set but my attempts to disable the checkbox have yet to work!
When I look at the type of the checkbox (through the source of the page or firebug) I see the checkbox has the following "fieldset#P13_DEFAULT_DISPLAY.checkbox_group" Do I need to do anything different to disable this type of object?
Any help would be very much appreciated!

Hi Andy,
I was returning to this thread to update it with how I resolved it, so thanks for the detailed response.
In a nutshell, the solution I used was a loop through the field set(of which there is only one item in it) and disabling it.
Where you say:
Secondly, checkboxes are, as you have seen, wrapped within a fieldset tag. The fieldset tag has an ID of the page item name. Each checkbox within that tag has its own ID value, which will be the fieldset ID plus "_n" (where n is a sequential number starting from 0) - thus, the first checkbox will be, for example, "P1_CHECKBOX_0", the second will be "P1_CHECKBOX_1" and so on.From my searching for a solution I had expected to see something like that. But the source for the item I was trying to disable is shown below and I can't see any numbers after it.
Do you know why? Is it because it is the only item?
<fieldset id="P13_DEFAULT_DISPLAY" class="checkbox_group">
<input type="checkbox" name="p_v18" value="Y" id="P13_DEFAULT_DISPLAY" /></fieldset>
Regards
Ian
Edited by: IanC2 on Feb 8, 2009 8:07 PM
Edited by: IanC2 on Feb 8, 2009 8:08 PM

Event to use for Creation of a Check box on Warehouse master Form

Hi experts
I have created one check box on Warehouse Master form in AfterMENUClick Event. It works fine if I open the form on Menuclick . But If I open the Warehouse master form by Link button from any document, it does not show the check box. I also want to deactive the checkbox if once it checked. So, I do some coding in Data_Load event. It also works fine If I open the form by Menu click. But if I open the form by Link button it gives error " Invalid Item Id ".
So I want to know which event I should use to create the check box and which Event I Should use to Deactive the Check box

Thanks Nagy for quick reply
I use the following code for creation of check box
<B1Listener(BoEventTypes.et_FORM_LOAD, False, New String() {"62"})> _
        Public Overridable Sub OnAfterFormLoad(ByVal pVal As ItemEvent)
            Dim ActionSuccess As Boolean = pVal.ActionSuccess
            Dim form As Form = B1Connections.theAppl.Forms.Item(pVal.FormUID)
            'ADD YOUR ACTION CODE HERE ...
            Dim oForm As Form
            Dim oMatrix As Matrix
            Dim oItem As Item
            Dim sysItem As Item
            Dim BinCheck As CheckBox
            Dim BinLabel As StaticText
            Dim cmbBinCode As ComboBox
            oForm = B1Connections.theAppl.Forms.ActiveForm
            oForm.PaneLevel = 1
            sysItem = oForm.Items.Item("2000002010") 'Excisable check box
            oItem = oForm.Items.Add("BinChk", BoFormItemTypes.it_CHECK_BOX)
            oItem.Left = sysItem.Left
            oItem.Top = sysItem.Top + 20
            BinCheck = oItem.Specific
            BinCheck.Caption = "Bin Enabled"
            BinCheck.DataBind.SetBound(True, "OWHS", "U_BinEnabled")
        End Sub
It gives error on sysItem = oForm.Items.Item("2000002010") line Invalid Item Id
Plz check and tell the problem
Regards
Gorge

Word 2010x64 to PDF using Acrobat Pro XI: Print shows box with ? inside.

System: Windows 7 SP1 X64
Adobe: Acrobat XI Pro
Office: Office 2010 x64
On multiple systems, I creating a document with standard text and font and then saved as or printed as a PDF. This creates a normal PDF with no visable issues. Problem arrises when printing the newly created PDF. All PDFs converted from Word print with question marks inside squares. There is no symbols evident on the Word document, created PDF or in print preview. All formatting Markups have been disabled in Word as well. Any ideas as to a work around or fix? See below images for example.
Word Document: Scan of Printed PDF:

We are having exactly the same issue as described above.
Did this ever get answered?
We are using:
Acrobat 11.0.3
Word 2010 (V 14.0.7015.1000 32-bit)
MS Office Home and Business 2010 SP2
Windows 7 Professional SP1 64-bit
The problem seems to occur only when, in Word, we use File - Print - Printer Adobe PDF, email the resulting PDF file to another office, and then printout on a Toshiba Studio 2330c printer.
If we print the file locally to a Toshiba Studio 2550c printer then it prints ok.
It also prints ok if we, in Word we use the Acrobat tab, click Create PDF, email the resulting PDF file to another office, and then printout on the same Toshiba Studio 2330c printer.
Any ideas?

Can't print from PowerPoint 2003 using Acrobat Standard 9.3.4

Getting an error while trying to print using the PDF icon in PowerPoint (2003): “An error occurred while trying to print to Adobe PDF”. Cannot print to the Adobe PDF printer either. Acrobat Standard was removed and re-installed and still cannot print.

I did as benshaine posted in his thread here: https://support.mozilla.com/en-US/questions/789780 I installed Firefox 3.5.10 to my desktop, printed from 3.5.10 and then went back into 3.6.x and I could print.

Adding check box in the transaction xd02

hi friends,
My requirement is to add a check box in the customer change : contact person details standard screen in the transaction xd02.
can any one please give me the suggestions for that?

when u find the BADI name go there and add a sub screen with the element you want to put in there. activate the BADI. your task is done.

Can't use LOV with item type "check box" in form

I have created a LOV that I want to use with a form application in 3.0.9. I need to be able to do multiple choices in this LOV (check box style) in the same query (only queries - users won't be able to update this field)
When I choose Check box as the item type in the form wizard I am not able to choose the LOV. I have to use combo box, popup or radio group for the LOV choices to appear, but then the query can only query for one value in the LOV at a time.
Is there a solution to this?

Hi,
This feature is not supported as of now. You cannot have multi select LOV for a form field and hence a checkbox cannot have a LOV.
Thanks,
Sharmila

Adding check box in selection screen

Hi all,
I have to add a check box to the previous report, I need to fetch the data based on the checkbox. Please tell me how to proceed further with flag set.
Thanx and Regards,
Line.

Hi..
1) do u want this? if checkbox is not checked then no data is read from database and if checked then only data wil be fetched -
tables pa0001.
parameters p_check as checkbox.
data: begin of itab occurs 0.
include structure pa0001.
data end of itab.
start-of-selection.
if p_check = 'X'.
perform read_data.
endif.
if itab[] is not initial.
loop at itab.
write:/ itab-pernr.
endloop.
else.
write: 'No data fetched from database,may be u need to check the Checkbox'.
endif.
*&      Form read_data
      text
--> p1        text
<-- p2        text
FORM read_data .
select * from pa0001 into table itab up to 20 rows.
ENDFORM.                    " read_data
2) Adding fields based on Chekbox -
parameters: p_check AS CHECKBOX MODIF ID ABC USER-COMMAND CH.
parameters: p_pernr like pa0001-pernr modif ID ABD,
            P_DATE LIKE PA0001-BEGDA MODIF ID ABD.
Check sy-ucomm = 'CH'.
AT SELECTION-SCREEN OUTPUT.
loop at screen.
if p_CHECK = 'X'.
   if screen-group1 = 'ABD'.
      SCREEN-ACTIVE = '1'.
      MODIFY SCREEN.
   ENDIF.
ELSE.
if screen-group1 = 'ABD'.
     SCREEN-ACTIVE = '0'.
     MODIFY SCREEN.
     ENDIF.
ENDIF.
ENDLOOP.

Adding check box in VL01n under item level. URGENT PLEASE!!

Hi,
I have the requirement like below.
Add a check box in VL01n / VL02n in item level under loading and shipment" tab.
Could anybody please tell me, is there any user exit? Can we add custom fields in standard loading and shipment screen?
Thanks
Kumar.

Hi Mahendra,
I am not able to find this badi( LE_SHP_TAB_CUST_ITEM) in SE19. I am getting message like 'BAdI implementation LE_SHP_TAB_CUST_ITEM does not exist!'.
Could you please help on this?
Thanks in advance.

Data grid view adding check box not able to check state

i have make window search a city name result show on data grid view and i have added the check box when i am checking the check box and other search of keyword that same row i am un checking the chek box when search it remain check how to making
it check for al type of keyword

i have make window search a city name result show on data grid view and i have added the check box when i am checking the check box and other search of keyword that same row i am un checking the chek box when search it remain check how
to making it check for al type of keyword
Hello,
It's not clear what the issue is, you could be more specific by sharing some screenshots and code.
In addition, it will be more clear if you could separate the description into multiple sentences.
Which control did you want to get help about? The checkbox or datagridview?
If it is checkbox, did you want to keep checked or keep it uncheck?
If it is datagridview, whether you are talking about checkbox column?
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Adding Check box in the SRM

Hello
in transaction <Issue Purchase Orders>
after we search for the po's, a list of pos is displayed and actions which can be performed on that.
we need to add a check box next to the output push button in the actions coloum .
when an action is pressed, we need to check if this check box is filled and and do certain tasks.
how can we achive this?
we need to do the same in the transaction < Process Purchase Order >
thanks
Chandrashekar.

when u find the BADI name go there and add a sub screen with the element you want to put in there. activate the BADI. your task is done.

Using Acrobat Standard 9 Adding Check Boxes

Similar Messages

Maybe you are looking for