Impossible to use Acrobat Standard XI

Once open, Acrobat Standard 11.0.08 crashes after a couple of second.
I receive a msg box with (see capture below).
Same result with new installation and updates from 11.0.0 to 11.0.08.
I use a Sony VAIO (Windows 8.1 - French, 8GB of memory).

Hi clean_be,
Please try the steps below:
Delete all the files from following folders:
C:\ProgramData\Adobe\SLStore
C:\Program Files (x86)\Common Files\Adobe\SLCache
And, delete all files from following folder except cache.db
C:\Program Files (x86)\Common Files\Adobe\ Adobe PCD
Then launch Acrobat, Accept EULA and enter the serial number again and check.
Regards,
Rave

Similar Messages

Printing web page to pdf file using Acrobat Standard 9

When I print a web page to a pdf file, the text in the file is mostly garbled. I have no problems in creating pdf files from MS office or other software. I have Windows 7 Home.
Any help will be appreciated.
Thanks

I do have Internet Explorer 9 and I was able to print web pages correctly following your suggestions.
Thanks for your help.
Date: Sat, 12 Nov 2011 06:53:59 -0700
From: [email protected]
To: [email protected]
Subject: Printing web page to pdf file using Acrobat Standard 9
    Re: Printing web page to pdf file using Acrobat Standard 9
    created by Bill@VT in Acrobat Windows - View the full discussion
There were problems with IE9 on it's initial release and that may be what you are seeing if that is the browser (you did not indicate the browser and that may be a key). If you have a different browser you might try that one with the same pages to see if it browser related.
By saying garbled it sounds like the fonts did not make it or you have selected "Use Local Fonts" in Acrobat. Try checking the latter first. Then check if the fonts are embedded in the PDF by checking the document properties (ctrl-D). If they are not, go back to the browser and select the press or print job options before printing and see if they get embedded and if your problem is resolved.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4021509#4021509
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4021509#4021509. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Acrobat Windows by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Using Acrobat Standard 9 Adding Check Boxes

Have been using AA Std 9 for some time and all of sudden I cannot use the add check boxes to forms with any accuracy. It is not an issue with the mouse. Have downloaded patches but still cannot add fields where they need to be. Major impact on productivity! Ideas?

I do have Internet Explorer 9 and I was able to print web pages correctly following your suggestions.
Thanks for your help.
Date: Sat, 12 Nov 2011 06:53:59 -0700
From: [email protected]
To: [email protected]
Subject: Printing web page to pdf file using Acrobat Standard 9
    Re: Printing web page to pdf file using Acrobat Standard 9
    created by Bill@VT in Acrobat Windows - View the full discussion
There were problems with IE9 on it's initial release and that may be what you are seeing if that is the browser (you did not indicate the browser and that may be a key). If you have a different browser you might try that one with the same pages to see if it browser related.
By saying garbled it sounds like the fonts did not make it or you have selected "Use Local Fonts" in Acrobat. Try checking the latter first. Then check if the fonts are embedded in the PDF by checking the document properties (ctrl-D). If they are not, go back to the browser and select the press or print job options before printing and see if they get embedded and if your problem is resolved.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4021509#4021509
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4021509#4021509. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Acrobat Windows by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I have two pc, one with windows 7 professional and another with windows 8.1. I'm the only owner and user of both. One works with 32 bits and the other (windows 8.1) , 64 bits. Can I use acrobat standard XI in both pc's being the only usuary?

Just in case. I have two pc's one with windows 7 professional (32 bits) and another with windows 8.1 (64 bits). Can I use, with one license, as I'm the owner and only user, acrobat standard XI?. Thank you in advance
Francisco

Yes, the license allows 2 installs for the owner's personal use. You can check this in the license agreement if you wish.

Can't print from PowerPoint 2003 using Acrobat Standard 9.3.4

Getting an error while trying to print using the PDF icon in PowerPoint (2003): “An error occurred while trying to print to Adobe PDF”. Cannot print to the Adobe PDF printer either. Acrobat Standard was removed and re-installed and still cannot print.

I did as benshaine posted in his thread here: https://support.mozilla.com/en-US/questions/789780 I installed Firefox 3.5.10 to my desktop, printed from 3.5.10 and then went back into 3.6.x and I could print.

Which version of Adobe Acrobat works with Lion? I am using Acrobat Standard 7.0

I just upgraded to Lion and Acrobat Standard 7.0 will not work. Which version of Acrobat do I need? Can I upgrade or do I have to buy all over again?
Thanks.
Bill

Did you ever find out?
How did you upgrade?

Is there a way we can use Acrobat Standard to assign a password for opening of signed PDF file once it has been downloaded from DocuSign?

Prior to implementing DocuSign, we used to scan manually signed document to a PDF file and then store the PDF file in a HR file share. We would then use Adobe Writer Standard to assign a read/write password to the PDF file. We now use DocuSign to have documents electronically signed and download the DocuSign PDF in our HR folders. However Adobe Acrobat Writer does not allow us to assign a password. It pops up a dialog box saying ""you cannot change security on this document because the document is signed or certified". We want to continue being able to store the PDF in our HR file share with passwords to restrict who can view off the share. Is there a way we can assign a password to the PDF file once it has been downloaded from DocuSign?

Thanks Bernd. We can't assign passwords before signature process starts as people will not be able to open the PDF without knowing the password. I think we will change our process and simply leave the electronically signed PDF in DocuSign and then "print" the PDF to our local file share for internal HR purposes. thanks again.

Can I create forms in Acrobat Standard XI taht can be saved using Acrobat reader after distribution?

I am using Acrobat Standard XI on a Windows 7 64 bit OS. I have created forms in my Acrobat Standard and sent them out and I am being told that both MAC & Windows users cannot save them using reader. Is that a rights thing I did not set or does Standard not allow that?

Users with Adobe Reader XI can save the filled form.

Acrobat Standard 9.1.2 update problem?

I'm running Acrobat Standard 9 on Windows Vista Ultimate.
Right after installing the Acrobat 9.1.2 update, but before restarting my system, I tried to open a PDF file, and experienced cascading file openings, where Acrobat seemed to be trying to open every PDF file on my hard drive in a separate window. Each window header contains the statement: "Adobe Acrobat not responding." After shutting down Acrobat through Task Manager, I then restarted my system, thinking that the problem was a failure to complete the update installation, but when I just tried to start Acrobat (without trying to open any file), it automatically began opening multiple PDF files again.
At that point, I ran a restore to a previous Acrobat version, but did not restart my system. After the restore was complete, my desktop displayed two Acrobat startup icons, one for v9.1.2 and one for the previous version. I tried to start Acrobat by clicking the previous verion icon, but had the same problem with automatic multiple file openings. When I checked the software list in Control Panel, I found that it only contained v9.1.2, and not the supposedly restored version. Does anyone know if I had to restart my system to make the restore work?
When it looked like the restore to previous version had not worked, I did an Acrobat program repair through Control Panel, and restarted my system, but when I tried to start Acrobat, the same problem occurred. Every time it occurs, I have to shut down Acrobat through Task Manager.
I never experienced this problem until I installed the 9.1.2 update. Has anyone else experienced problems with this update? Does anyone here know the cause of the automatic multiple file opening problem?

As far as I'm concerned, there is something screwy about this whole release. I have used Acrobat Standard since v4.0, and was forced to buy v8 or v9 when I upgraded my OS to Vista, so I chose v9. However, the most important feature to me (besides converting other documents to PDF files), something called FreeText, was replaced by something now called Typewriter. Unfortunately, where FreeText was intuitive and seamless, I cannot view the result of a Typewriter session in my document, after entering new text and closing the feature. On top of that, Adobe tech support seems to have gotten less accessible over the years.
This new problem has now rendered my Acrobat program completely unusable, and for some reason, Adobe's Internet support contact form doesn't even interact with my inputs. This forum has proved useless to me for any problem-solving. Anybody from Adobe Engineering listening?

Acrobat standard 6 user defined bookmark from word 2003

Hi..
I've been trying to convert word 2003 documents to pdf using acrobat standard 6. All seems fine except the user defined bookmarks in the word document.
The bookmarks work fine from the bookmark pane but when accessing them through the hyperlinks within the document the destinations are wrong. The pointer will jump to the page it is in or maybe 1-2 two pages adjusent to the page the bookmark actually is in.
Can someone help me with fixing this problem?
Cheers!

Steven,
If it happened after an uninstall as you indicated, you may have to go to the add/remove in the control panel and do a repair on Acrobat. If the printer works, then you need to check that PDF Maker also works (it uses the printer). Asking about the printer was the first check and it passed.
I am not good at the PDF Maker options, but looks like that is the problems.
For MrEclipseguy, you need to be looking at the same options. Check things out in WORD first and then play with the other part. In WORD, there are issues with enabling the toolbar that is highlighted in other topics. I do not remember the solution.

Acrobat Standard 9.1 - Forms Distribution

I am trying to distribute a form using Acrobat Standard 9.1. When I try to use either to use the adobe.com or "Save a local copy and manually send it later" option, I am getting this error: "The filename you specified is not valid because it does not include a .pdf extension, contains one or more invalid characters or the path preceding it refers to a protected system location." None of these is true. I was able to do this last October and November, but last month, I had to get a new disk and loaded Acrobat on the new disk along with my other programs.
Does anyone have a suggestion?
Kit Marty, Medina, Ohio

Bill,
To answer your last question first, I am running Windows NT Professional SP3. The file name I tried to use was "Germ Patrol Registration Form (June 5, 2009)". More importantly, using the 8-chracter file name "Register" worked. Thanks for your help.
However, one thing that really puzzles me is that prior to reloading my system onto a new disk last month, the long file name worked. I created a form for distribution in November with the name "Germ Patrol Registration Form (November 21 2008)" and it worked just fine. Is there some default setting buried in Acrobat's preferences that tells it to accept only short file names for files that will be distributed?
Kit

Acrobat Standard 7.0 Page handling

I have a client using Acrobat Standard 7.0 on Windows XP SP2.
A couple of weeks ago she noticed a change in her Acrobat print settings and did not know what the "problem" was. Long story short, I found that the "Choose Paper Source by PDF page size" option in the page handling section of the print window was checked and she had to uncheck it to get the print she wanted from the printer she wanted to print to. Only problem is that now that option is permanently active and she wants it permanently inactive.
How do i make this change?

Uncheck it and then go to the printer properties (not in the application, but in the printer menu) to set the default page size.

How to roll back to Acrobat Standard XI from Acrobat Standard DC Cloud

Hi,
How do we roll back/install Acrobat Standard XI from Acrobat Standard DC using the cloud? as we need to use Acrobat Standard XI?
Thanks,
Mike

Hi Michael,
In order to rollback & install Acrobat Standard XI from Acrobat Standard DC please follow these steps.
1) Completely uninstall Acrobat DC standard.
2) Restart your computer.
3) Install Acrobat XI standard using this link Download Acrobat products | Standard, Pro | DC, XI, X & serial it using the serial number for your Acrobat XI Standard or the Adobe ID.
In case if you experience any issue please let us know.
Regards,
Aadesh

PDF cannot be merge in Acrobat Standard 5

Hi
Am using Acrobat Standard 5. When trying to merge PDF, below error appear. Wonder if anyone can guide me on how to solve this problem ?
These documents contain subsets fonts that have the same name and cannot be merged

With the older versions like AA5, you had to print to a new PDF to do many things that are built in to Acrobat today or can be done with preflight. In this case try to print and select the job options to embed all fonts at 100%. You may have to save the job settings to a new name for this (the files are write protected). Then try to combine.

Is possible to save a form using Acrobat Reader? How to?

Hi all,
I designed a static pdf form using Livecycle. I want to send it to the form recipients, and I need they return me the pdf form filled. I can do this without problems on Adobe Acrobat Pro, but my mates that are using Adobe Reader can't save the filled form. Adobe Reader offers them to save a blank copy of the form or print it filled. But this isn't what I need. I need to have x copies of the form (of the pdf file) filled by my x recipients. Is there any option in Livecycle to allow saving the filled form on Acrobat Reader?
Thanks in advance,
Enrique Llorens
P.D. Apologies for my awful english...

Hi Enrique,
In order for users with Reader to be able to save your form, it has to be 'Reader Enabled' before you send it out.
You have three choices:
Reader enable the form with LC Reader Extensions ES2, which is a server based component of the enterprise suite. This is intended for processing large volumes of forms/data and is an additional cost per form.
Reader enable the form using Acrobat Standard v9 (or Acrobat Pro v7 to v8). This has license restrictions to less than 500 users per form.
Instead of users with Reader sending the form back as a PDF. You could set up a 'Submit as XML' button. This does not require the users with Reader to Save the form.
I have a summary of features (functions that are available/restricted) depending on whether the form is enabled and how it was enabled on our blog: http://assurehsc.ie/blog/index.php/2010/05/using-livecycle-forms-in-acrobat-and-reader/
When you open the sample at the end of the post, if you hover over the question marks, you will see screenshots of the enabling process.
Hope that helps,
Niall

Impossible to use Acrobat Standard XI

Similar Messages

Maybe you are looking for