Using Additional Information Tab for CC

Anyone know if you can add Closed Caption data to a dv file thought the use of Compressor 3's Additional Information Tab?
The manual lists
QuickTime outputs
MPEG-2 elementary stream outputs
MPEG-2 program and transport stream outputs
But I tired to create a new DV quicktime file using the steps on pg 83 chapter 4 of the user manual and the resulting file did not have CC.
o| TOnyTOny |o

Hi Rajendra,
Check OMF4 and in that slect ME21N code there reference data,header.
In this screen check validity end tab and save
Regards
Prem

Similar Messages

  • Add additional data tab for tcode IW51/IW52/IW53

    Hi,
    I have to add the additional data tab for tcode IW51/IW52/IW53
    I have tried using customer exit QQMA0001. But the tab is not visible.
    Please let me know how to add this tab using customer exits.

    Hi Jogeswara,
    Just need a small help.
    We are not updating the standard table QMEL.
    But we have a customised table for the same.
    So when we create a notification number... it goes in the function exit but at that time we do not have the notification number generated.... and we are inserting records in custom table in this exit....
    So please guide us how we go ahead about it...
    Regards,

  • I'm getting messages of "script issues" when I am using an open tab for FACEBOOK.

    I have an open tab, for MOZILLA FIREFOX AND another tab of mozilla firefox for FACEBOOK. As I'm using facebook, it starts running slower and slower, sticking in place and then finally,... a notice of a "script issue". I've had well over a dozen script issues, with firefox crashing..........

    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

  • Can I use an app tab for groups of related sites?

    * I use several weather sites to compare or get different weather details.
    * I use various mapping programs for travel or traffic.
    * And travel sites (kayak, priceline, etc.)
    I would like to have an app tab for each of these different catagories. Is that possible?

    BusyMac's help page on the subject says
    'You can create a single app-specific password and use it for multiple apps, such as BusyCal and BusyContacts.'
    This isn't quite what you asked but I would take it as implying that you can reuse the password for other Macs. If you can't you will soon find out. You will need to write down the password and enter it each time.

  • Oracle hrms install additional information types for classification

    Hi,
    We have ran out of DFF segments in the Orgn screen. Requirement is to capture additional information against Organizations.
    As a work around, we intend to capture additional information by adding NEW information type for the classification 'HR Organization'.
    Appreciate if any one can provide some tips on this.
    Thanks,
    Raghu

    Avaneesh,
    I see your message and it may relate to what I'm trying to do.
    I need to set up an extra information for Assignments, particularly for contingent workers.
    Could you explain how to access "Register Extra Information Types"? and what is Org Developer DF, or any equivalent for Assignments?
    Thanks,
    Skip

  • Can I use additional internal HDD for my Satellite A200-1A9?

    Hello, new to these forums,
    I recently bought the A200-1A9 and I'm very pleased with it. I was interested in adding an additional internal HDD to the exisitng 120 GB one . I obviously didn't do enough research as I bought a Toshiba MK2035GSS: 2.5" HDD 200 GB thinking it would slot right in the spare slot and it doesn't.
    So really I'm looking for some advice on if I can add an extra internal drive and if so what model and how. After taking of the back slot cover there does look to be room for another drive although I'm not sure if the correct connections are there or maybe if the space is used for somthing else.
    Any help greatly appreciated.
    Thanks,
    Martin

    Hello Martin
    As far as I know some A200 models are delivered with 2 HDDs. because of that Toshiba make standard notebook chassis. All A200 models use this standard chassis. Your A200 is delivered with just one HDD and because of that place for second HDD is empty. This does not mean you can use second HDD.
    I have the same notebook as you and in my case there are no any HDD connectors prepared for second HDD.

  • How do i use additional hard drives for application installation

    I have close to a terabyte of drives on my new mac pro and would love to use one of the other hard drives to install applications on- especially my windows applications- like solidworks. However every time i try to install something to my mac it wont give me a choice of where to put it. Same is true under parallels- so I keep on filling up my mac HD and the other 3/4 of a terabyte is unused!!!
    I called apple care and they said that Apple doesnt recommend using other disks- where did they find him?
    How do i use the other disks to install programs?
    Richard

    Richard:
    Without repeating what eww has already expressed, it seems, in the first place, you need to give yourself adjust yourself to how Mac OS works, since by your own admission, you are new to Macs. When I use a PC, as I have to from time to time, I always wish that it worked as my Mac does. Of course, I just have to figure how to work with what I see as its limitations to get the job done. The learning curve gets less steep as we move along in the process.
    Your work pattern and needs seem to be quite different from most mac users I know. This is neither good or bad, but it does mean that your needs are specialized. You seem to work with especially large files, for example. So your installed volume becomes crowded more quickly that most of the rest of us. However, eww's suggestion that you put some or all of your data on another HDD works for others in the same way, although in different situations. For example, some people with older macs can only install OS X on a partition of less than 8 GB, as they work with a limitation where they have to install OS X on the first 8 GB of the HDD. Thus they have to have most of their data on a separate partition.
    You noted, +I have looked through mac HD and havent found " data" i can move any where yet+. May I suggest that you move your entire Documents folder to another drive, since that is where all your data would normally be stored. Another option would be to get a larger HDD. I don't know how large your present HDD is, but you can max out the size of your internal HDD. Or you can keep your working documents on your internal HDD and move the rest for storage on an external HDD. You know best what will work for you. What I am trying to say is that you have options, and I feel sure that you will get it figured out.
    Cheers.
    cornelius

  • I just upgraded to 5. something. WHen I close my broswer it used to save tabs for reload the next time i opened it. This feature is now gonw, how do i restore tabs.

    when i hit the x on the browser it warns me that im going to close x amount of tabs. then gives me an option to cancel or close. Before I upgraded it would ask me if I wanted to save my tabs but now it doesnt ask that any more. How can I get this feature back.
    Below it asks how often it happened and its every time i close my browser.

    when i hit the x on the browser it warns me that im going to close x amount of tabs. then gives me an option to cancel or close. Before I upgraded it would ask me if I wanted to save my tabs but now it doesnt ask that any more. How can I get this feature back.
    Below it asks how often it happened and its every time i close my browser.

  • How do use a cross tab for this ?

    Hi,
    I have the following details :
    Sn idType cnt1 cnt2
    1 test1 11 22
    1 test2 2 4
    2 test1 33 2
    2 test2 3 4
    i need to show it as
    Sn test1cnt1 test1cnt2 test2cnt1 test2cnt2
    1 11 22 2 4
    2 33 2 3 4
    how can i do that using analytic function ?
    kindly advise
    tks & rdgs

    Hi ,
    managed to do something like this :
    select lotid ,
    sum(decode(a.type , 'cp1' , cnt)) type1Cnt ,
    sum(decode(a.type , 'cp1' , yield)) type1Yield ,
    sum(decode(a.type , 'cp2' , cnt)) type2Cnt ,
    sum(decode(a.type , 'cp2' , yield)) type2Yield
    from testing a
    group by lotid
    results :
    LOTID     TYPE1CNT TYPE1YIELD TYPE2CNT TYPE2YIELD
    1 lotid1     22     33     2     4
    2 lotid2     5     6     7     11
    but would a analytic function be able to do that ?
    appreciate ur advise
    tks & rdgs

  • User Exit - adding defualt WBS Element in addi.tab for IW31 - Servi.Order

    I am facing a problem with adding WBS Element in Addit.Data tab for Service Order creation using IW31.
    At the time of creating service order using TCODE IW31, I have to maintian default values like WBS ELEMENT, for this I am using a USER EXIT "IWO10010".
    The problem is getting dump error. Becuase, it is NUMC type and I am passing the value with character + numeric. Like "EX/1232/22".
    Field length is NUMC - 8.
    "CAUFVD-PSPEL"
    If I create manually without using user exist, the field WBS Element is accepting the value and service order is creating successfully with WBS Element.
    This is also same as CAUFVD-PSPEL.
    I Couldn't understand How the SAP system will works?
    Any solution for this.
    Note: Creating Service Order IW31, Passing WBS Element with user exist with same field (CAUFVD-PSPEL) giving dump error showing "Passing Character values". If I create manually, and enter character + numeric in the same field CAUFVD-PSPEL, system creating service order without any error.
    Help me out
    thanks
    Sekhar

    self answered

  • Someone using my mail address for spam

    I have been getting a mail delivery notification that my email address is used to send spam to someone in Italy. Does this mean that they have access to my account? Is there any way to track down who is doing this? Can I stop it?
    Thanks
    David

    Hello David.
    Unfortunately, spammers do this sometimes but it does not mean the spammer has access to your account.
    Spammers do not provide/include a valid sending or return email address and for many email accounts (depending on the email account provider), there is nothing preventing someone from including any email address in the email address field for the account preferences to appear as the sending email address for a message sent with the account.
    For one of my email accounts in Mail (if I know your email address), I can simply go to Mail > Preferences > Accounts and under the Account Information tab for the account preferences, enter your email address in the email address field and your email address will appear as the sending email address when sending a message with my email account.
    Some ISPs and email account providers restrict their customers from doing so but not all. As an example, you can't enter a different email address in the email address field for the account preferences for a .Mac account. This will prevent a message from being sent but you can enter a different reply to address for a sent message by including a Reply To: field with the message header when sending a message but a different reply to email address must be entered manually for each sent message.
    You need to contact your ISP or email account provider for your email account. The return email non-delivery notification should include the original sender's computer IP address when viewing the long message headers for the non-delivery email notification message.
    To view long message headers for a received message, with the message open, at the menu bar go to View > Message and select Long Headers. You can then forward the message with long headers shown for the original received message to your ISP's or email account provider's security department.

  • Content tab for a fact table

    Hi
    Please , help me in knowing the use of content tab for a fact table in the repository in OBIEE.
    Thanks.

    if you have multiple LTS then you should set the content level approprately otherwise you can get errors during consistency checks.not able to find any link which talks only about content level.see these links and let us know if you have any doubts
    http://kr.forums.oracle.com/forums/thread.jspa?threadID=604637
    Content tab is also handy when you are using aggregate tables.
    Regards,
    Sandeep

  • How can I set up an App Tabs for an active site like one of the BBC's radio stations? They turn out to be static and soon out of date.

    I have been using an App Tab for static pages within Ancestry. No problem.
    But I would like to make an App Tab for one of the radio stations for the BBC network in the UK. (I live in the UK.)
    Every time I do so the tab sticks at the time I installed it. No good for listening to current programs 2-3 days later.
    Has the introduction of active tabs just arrived with Firefox 5 (which I only installed five minutes ago)?

    I agree anti-relay can be using UBE feature. However, there is serious problem in reject the spam mail. My nms is using UBE feature to stop spam mail. According to the work flow of the UBE, the mail is received by nms completely and UBE is going to invesgate the mail address. Although UBE can stop the spam mail, the spam mail have a trouble in returning the mail to the sender. The reason is the sender address is usually not existed in the world. That will cause a lot of mail waiting in the mail queue.
    In my experience, do not use UBE for anti-relay.

  • Basis of choosing EIT, SIT and Addition Information DFF

    Hi Gurus,
    Can you please enlighten me on the basis of choosing EIT, SIT, Further Infomation or Additional information DFFs for capturing a particular data .
    Since all these options provide users to add new segments to capture data specific to customer's business requirement, on what basis we should decide which one should be taken to add the new segment ?
    I have a vague idea, hence would like to have a clear understanding with the help of the gurus out here.
    Thanks a ton in advance.

    Hi,
    Please see if these documents/links help.
    Note: 210616.1 - SIT vs. EIT - What Is The Difference?
    Differences between EIT and SIT in HRMS
    http://oracle.anilpassi.com/differences-between-eit-and-sit-in-hrms.html
    Oracle Applications Documentation
    http://www.oracle.com/technology/documentation/applications.html
    Regards,
    Hussein

  • Additional Data tab missing from PO items

    Hi Experts,
    The Additional Data tab for items is missing when I try creating a PO.
    I have compared the screen layout, with the system where it is working fine, and found no difference in the configuration.
    Please suggest, how can I enable the "Additional Data" tab in PO for items.
    With Warm Regards,
    Sayan

    Hi Preeti/ Dev,
    Please refer to the below screen-shot.
    Here you will find the Additional Data tab in the Items section.
    The Additional Data tab in the header section is appearing fin

Maybe you are looking for