Using Assignment field or Segment field for adding product information

Hello people,
My costumer is using the new general ledger and wants too be able too add product information too FI postings. They have put their focus on using either the assignment field or the segment field (other options are not a possibility). Using the segment field will make profibility analysis easier because of existing reports. However, Iu2019ve heard of performance issues when the amount of segments used increases too say 50 or more. Does anyone have any experience with either 1 of these situations and or some good advice?
Many thanks,
Kees

As you have mentioned, reflection error mostly occurs when there is a object type mismatch.
If it is of type object reference then try
newMember.getFieldMetadata("VENDOR_REF").set(newMember,vendorBean.getObjectReference());
Further, check if the vendor object enclosed in the collection member "newMember" and the vendor object "vendorBean" are of the same type.
regards,
Immanuel

Similar Messages

CRM_MKT_MODIFY_ORDER for Adding Products in Journal

Hi ,
We are trying to insert Product and Journal Data in
CRM_MKT_MODIFY_ORDER BAdI.
The CRM_ORDER_MAINTAIN FM being called with proper data after this BADI call.But no
products are getting created in Journal.Journal is cerated.
Also Observed we can't do in ORDER_SAVE BAdI ,As GUID not available in order save when the
activity being created in back ground
Please post me if any code available with you for adding products.If posible ,drop u r mail id ,So i can send more info.
Reference FM related to Adding products in CRMV_EVENTS will also OK.
PS : This Campaign run actually create multiple activities in back ground.
Message was edited by: Ranganatha Prasad Kurupati

Hello,
Regarding CRMV_EVENT, have a look to CRM_PRODUCT_I_A_CHANGE_PROD_EC.
Could you send me your coding at [email protected]?
Regards,
Frédéric

Can I use my parent's credit card for the billing information under my name?

Can I use my parent's credit card for the billing information under my name?

You can use whatever nickname that you want to use in the game center. You can change it as well. It shouldn't matter what nickname you use if that's what you are asking. Other people playing games are not going to know that you or your parents or whoever is the card holder. That name identifies you for social games and notifications, achievements and that sort of thing.

Can you provide a FM for getting product information based on Contact ID?

This is in CRM
Can you provide a FM for getting product information based on Contact ID or Contact GUID?related to CRM
I need to get product id from contract id or contact guid.
please provide help in this

Hi there. Please check if either of these function modules works for you:
ISU_MDG_GET_PRODUCT
ECRM_MDG_GET_ACTUAL_PRODID
Hope this helps.
- April King

Can you providr a FM for getting product information based on Contact ID ?

Can you providr a FM for getting product information based on Contact ID or Contract GUID?

Hi there. Please check if either of these function modules works for you:
ISU_MDG_GET_PRODUCT
ECRM_MDG_GET_ACTUAL_PRODID
Hope this helps.
- April King

Add a new field in segment CRMW_BUPA_HEAD for Business document BUPA_MAIN

Hi,
I want to add a new field in the segment CRMW_BUPA_HEAD for the BDoc BUPA_MAIN, in order tu use a filter criteria for the subscription.
Using the Bdoc modeler (transaction SBDM) I tried to add the component PARTNERTYPE (Data element BU_BPKIND) that is in the structure BUS_EI_MAIN (Central data), but the system only allow me to add a ZZ... field and then of course it is not fill in.
So if someone knows how I can add a standard field, or how I can fill in my customer field it will help.
Regards,
Benoî

Hello,
Urgently, how to use the EEWB to ad new field in the business partner page
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_mdm/~form/handler
regards,
Muralidhar Prasad.C

Best practice for adding products in multiple languages

We have multiple products with the same product number and product name - but have different descriptions (translations).
Our BigMachines quotation system allows us to have several language layers for the same product. But it seems like this is not possible in CRMOD?
I guess the work around would be to have x amount of fields containing the description in different languages in CRMOD.
Just wanted to confirm this before moving on down that road..
Regards,
Allan

Thank's Bobb. That was unfortunately the answer I expected.
I can't really wait for the enhancement, so I thought of the following work around:
- Rename the product name field to product number
- Create x amout of new product name and product description fields (for each language)
Do you see any pitfalls here?
Regards,
Allan

HT204053 Can I use my brother's credit card for my billing information?

I live in Qatar, how can I add billing info to my account?

http://www.apple.com/legal/itunes/appstore/qa/terms.html#SALE
PAYMENTS, TAXES, AND REFUND POLICY
The Mac App Store, App Store and iBookstore services (the "Stores") accept credit cards issued by banks in Qatar or Content Codes as forms of payment.
To use the iTunes Store in a country you need a credit card (or other card type if acceptable in a country) issued in that country, billed to an address in that country, and also be physically present in that country when using the store.

Chart of account conversion SLO tool,method for a Production system

Hi All
We have a requirement like we want to use Chart of account conversion tool for a production system where transactional data are present.
We have used this COA conversion tool for best practice solution not in a production system.
we want to know the difference between these two methods like production and non production system.
Provide me some process document on the SLO service tool for the same
Mrinal dey
9836265158

Hi Mrinal
I'm wondering the same? How to go on in productive system after to use the conversion toll?
How did you manage?
Regards
Angels

Dedicated system for music production?

I have a measly 80GB internal HD on my Powrbook that is taken up mostly by my business stuff and email. I have a couple of large external FW HDs that I could use for Logic. Does it make sense to install a fresh copy of Leopard onto one of these HDs and use that disk and system solely for music production?

No, just save all your logic files on one of the external drives. Run the Logic app and leopoard from your MB.

CRM 7.0 / IS-U: adding custom fields to Business agreement for replication

Hello Experts!
We're working on replication of custom fields from IS-U to CRM 7.0.
Can you help me with clarification of my understanding of these questions..?
1) CRM/IS-U mapping tables for buag_main:
Business Agreement(BUAG_MAIN) is a BO in CRM that corresponds to CRM table CRMM_BUAG and to Contract account in IS-U table FKKVKP.
Table FKKVKP were enhanced with some z-fields,
so we are going to enhance corresponding CRM table CRMM_BUAG (or CRMM_BUAG_H) with that new fields..
But we see that these CRM and IS-U tables have far not the same field structures..
So, the question: Which crm and is-u tables i should look, enhance and replicate for Business agreement?
2) Access to Business agreement with possibility to add custom field:
I couldn't find in Web UI where i can directly edit profile of Business Agreement..
I've found just access to assignment block "Business agreement" on Account's profile overview page..(Role ServicePRO; Account details).
There I used AET to add custom field..but I faced with problem when the 1st popup appeared: there was no enhanced object "Business Agreement"..
Also in role "Utilities IC Agent" i've found "business agreement" profile but there I don't see buttons for adding custom fields..
So, the question is: Where I can access Business agreement profile to enhance it with custom fields for replication with IS-U?
3) CRM/IS-U data exchange functions:
I tend to use tcode CRMC_BUT_CALL_FU:
for CRM inbound event of BUAG object - FM CRM_BUAG_MWX_PROCESS_EXT_STRUC..(as template).
Question: Am I right that it fits my requirement to replicate custom fields from IS-U to CRM?
Please tell me if you need more information..
Looking forward to your answers.
Thank you a lot in advance!
Kind regards,
Evgenia

Hi Gobi,
Thank you for advice. But:
I've created fields not by using AET - I used documentation that Nicolas suggested me above.
I've enhanced tables and structures that were mentioned there with my z-fields for both sides (CRM and ERP).
Also I looked CRMC_BUT_CALL_FU for CRM Inbound BUAG_MAIN - corresponding standard FMs are marked for call.
Any ideas?
Thanks in advance.
BR,
Evgenia

No segment field in KE52 to assign in the profit center

Hi,
I am unable to assing the segment that is created to the profit center. The segment field in KE52 is missing. How should I assign the segment to profit center.
Please guide me.
Thanks,
Shilpa.

Hi Ajay,
I am using ECC 6.0 Version. Please assist. I have checked the status it is picking 298 screen for program SAPLRKPM, but it should pick 300 screen in the same program. What am I supposed to do?
Please help me.
Thanks,
Shilpa.

Using a single master data infoobject for multiple fields

Hello experts. Today I ran un with the following problem: I am modelling an Infocube and will be receiving a flat file with several fields, of which 3 of them give information about sales representatives.
For each transaction there are 1-3 sales representatives involved, and this is reflected in the file I am going to be loading. If only one representative is involved, it means that he was in charge of a complete negotiation, and his code will be found in all three fields, if two representatives are involved, it means that one was in charge of one part of the negotiation, while the other was in charge of the rest, and according to what they were in charge, their code will appear in one or two of the fields. If three representatives are involved, each one's code will appear on the field corresponding to the part of the negotiation they were in charge of handling.
I already have the sales representative's codes as master data, but I was wondering how I can have those three fields map into the same InfoObject, if that is possible at all. Maybe in the transformation I map them to the same object? Also, what happens when you create the Data Source? As far as I know, each field in the Data Source must be unique, which makes it impossible to use my ZSALESREP InfoObject for the three fields, at least at Data Source level. What can I do in this case?

Hi Pedro Olvera,
You need 3 infoobjects in datasouce to load 3 different fields.
If you want load to a single infoobject, you can map accordingly in transformation, bult last field overwrites previous one.
Its better to maintain 3 fields in cube. Create 2 more sales Reps(ZSALESREP1 & ZSALESREP2) with Reference to ZSALESREP then you no need to maintain master data for ZSALESREP1 & ZSALESREP2.
Use these 3 fields for modeling.
Hope it Helps
Srini
[Dont forget to close the call by assigning poings.... - Food for Points: Make a Difference through Community Contribution!|https://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/007928c5-c4ef-2a10-d9a3-8109ae621a82]

Message No F5808 Field Assign. is a required field for G/L Account.

Hi Guys,
I have a problem when releasing a cancel credit memo billing document.
It shows the following error message:
Field Assign. is a required field for G/L Account.
Message No. F5808
Diagnosis,
The value field "Assign." in the interface to Financial Accounting is an initial value but you are required to make an entry in the field selection for G/L Account XXXX in company code XXXX linked to the field selection for posting key "50".
System Response
Error
Procedure
It might be an error in the configuration of the G/L account field selection. The initial application, used to call up the interface must otherwise define a value for field "Assign.". If this is the case, contact the consultant responsible for the application.

Hi,
The Assignment Number BSEG-ZUONR (I suppose "Assign." means it here.) field status for posting key and GL is optional and mandatory.
I think the GL Account SORT KEY in FS00 is the assignment selection for Billing to FI doc. Say if the SORT KEY is Posting Date, the assignment from Billing to FI Doc would be the date of posting.
But if the SORT KEY is blank ( This is case for my G/L account), the system will select the assignment written in Billing document header (VBRK-ZUONR).
I checked other billing documents, which are not in the same billing type as the one with error, and found it follow the above logic.
So how come this time it shows the above error? Really confused.
Emma
Edited by: qun yang on Sep 22, 2011 9:12 AM

Field Prof.Segment is a required field for G/L Account 2100 454010

Hi Controlling Copa Expert,
user facing problem, at the time of Business Transaction , getting error while MIRO, " Field Prof.Segment is a required filed for GL 454010, kindly let me know where and wht input parameters for the same. Prof. Segment.
we have made Copa Report. as per client requirement. in this regard , as i understand ,all P&L GL Cost element field status group Profit Segment Required entry. just wht happened while doing Miro, getting error for 327225 i.e Price Diffrence gain. earlier FSG was G029 but i did changed Profit Segment Required entry . copy from G029 and given new name COPA . and copa FSG Profit segment required entry.
but finally we have change like earlier FSG i.e G029, coz at the time of Miro Profit segment filed was there but is was not active for input parameters. finally we have resolve the issues without Profitability segment... but its not right. so kindly requested to you ... where i have to config in Copa report.
Kind regards
Pranav Kumar
SAP FICO Consultant.

HI Hursikesh,
i want to give PSG at any how, if i give as optional problem resolved but Profitability denouement will not generate. we want to give PSG at any how, because we have made FSV financial statement version in FI . client want match through COPA Report. kindly help me how all the business transaction updated with Profitabilty Document generate.plzzze.
client want material cost under GL Group Head :- Manpower ,Consumables and Energy GL already assign in PA Structure, under Conversion cost . and revenues. so it will come gross Profit. but revenues updated based on Condition Types .. i don knw why nt updated.. as i understand user skip the PSG thats the reason , thats why i given FSG as mandatory in relevent GL FSG .now tell me wht should i do . for this issues scenarios matching with FSV with COPA report.
Note : in FSV P&L Account if m not wrong. not balance sheet item. FYI.
yr quick action will be highly appreciated.
Kind regards
Pranav
SAP FICO Consulatant.

Using Assignment field or Segment field for adding product information

Similar Messages

Maybe you are looking for