Using band zoom to select all data points within the band

I'm feeling stupid this morning. I'm a new user with 2011, but haven't figured out how to copy a portion of data. I can use view 2D axis system to view my data. Then I use band zoom to get to the portion I need, but for the life of me I can't get it to copy that portion. I have set flags at the beginning and end and such, but the best I get is the beginning point, a single no value point and the end point. I am not getting all the points in between the flags. Am I supposed to somehow flag all points in the zoom view? I have done a search, but can't figure out what I am doing wrong.
Robert
Solved!
Go to Solution.

Hello Robert,
This is a pretty easy and straight forward thing to do:
Put you data into the VIEW window. Then pick the BAND cursor in the toolbar (see below)
Select the "Set Flags" icon in the VIEW windows with the data and the Band Cursor:
After you have the data selected with the FLAGS (the data points will be displayed in a thicker line style) click on the "Copy Data Points" icon:
You will get a full copy of the data in the band, copied to a new channel in the Data Portal. In the example below I dragged the new data into both windows (not that the red data is still highlited by the flags, this it's a thicker line style).
That should answer your question, please let me know if you have additional questions,
Otmar
Otmar D. Foehner
Business Development Manager
DIAdem and Test Data Management
National Instruments
Austin, TX - USA
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."

Similar Messages

Selecting all data from employee where foreign key = null and show it in view

Hi guys i have view like following :
SELECT dbo.Nationality.NationalityName, dbo.Employee.DriverName, dbo.Employee.DriverID, dbo.Employee.NationalityID, dbo.Employee.ResidentNo,
dbo.Country.CountryName, dbo.Employee.CountryID, dbo.Branch.BranchName, dbo.Employee.BranchID, dbo.Employee.JoinDate,
dbo.Employee.ResignDate, dbo.Employee.HealthCarNo, dbo.Employee.JobID, dbo.Jobs.JobName, dbo.Department.DepartmentName,
dbo.Jobs.DepartmentID, dbo.Employee.PlaceIssue, dbo.Employee.Deduction, dbo.Employee.ExpireDateMedical, dbo.Employee.PolicyNumber,
dbo.Employee.Owner, dbo.Employee.Version, dbo.Employee.ExpireDateResident, dbo.Employee.Salary, dbo.Employee.SexID, dbo.Sex.SexType,
dbo.Sex.FlagSex, dbo.Employee.MiritialID, dbo.Miritial.MiritualStatus, dbo.Status.StatusType, dbo.Employee.StatusID, dbo.Employee.UnactiveReason,
dbo.Employee.BirthDate, dbo.Employee.DateToday, dbo.Employee.UserID, dbo.Employee.PassportNo, dbo.Employee.Period,
dbo.Employee.AccountNo, dbo.Employee.Bonus, dbo.Employee.AccountType, dbo.Employee.PlaceOfBirth, dbo.Employee.EmplyeeName,
dbo.Employee.ExpireDateresidentHijri, dbo.Employee.PassportDateStart, dbo.Employee.PassportDateExpire, dbo.Religon.ReligonName,
dbo.Employee.ReligonID
FROM dbo.Nationality INNER JOIN
dbo.Employee ON dbo.Nationality.NationalityID = dbo.Employee.NationalityID INNER JOIN
dbo.Country ON dbo.Employee.CountryID = dbo.Country.CountryID INNER JOIN
dbo.Branch ON dbo.Employee.BranchID = dbo.Branch.BranchID INNER JOIN
dbo.Jobs ON dbo.Employee.JobID = dbo.Jobs.JobID INNER JOIN
dbo.Department ON dbo.Jobs.DepartmentID = dbo.Department.DepartmentID INNER JOIN
dbo.Sex ON dbo.Employee.SexID = dbo.Sex.SexID INNER JOIN
dbo.Miritial ON dbo.Employee.MiritialID = dbo.Miritial.MiritialID INNER JOIN
dbo.Status ON dbo.Employee.StatusID = dbo.Status.StatusID INNER JOIN
dbo.Religon ON dbo.Employee.ReligonID = dbo.Religon.ReligonID
suppose i need to show all data from Employee table (NationalityName,BranchName,JobName) where
NationalityID =NULL OR BranchID=NULL OR JobID=NULL
WHAT I DO
Notes : I mean in topic(selecting all data from view not table
meaning i need to show all data in employee table by view
in case of forign key(any forign key)equal null

I think you need to change
FROM dbo.Nationality INNER JOIN
dbo.Employee ON dbo.Nationality.NationalityID = dbo.Employee.NationalityID
to
FROM dbo.Nationality
LEFT JOIN
dbo.Employee ON dbo.Nationality.NationalityID = dbo.Employee.NationalityID
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

I bought a new iMac today. I'm using migration assistant to move all my software, but the time just keeps getting longer. It says connect an Ethernet cable for faster data transfer. I did, but that doesn't seem to help. Any ideas?

I bought a new iMac today. I'm using migration assistant to move all my software, but the time just keeps getting longer. It says connect an Ethernet cable for faster data transfer. I did, but that doesn't seem to help. Any ideas?

m1doc,
Are you migrating from a Mac or a MS Window machine? Either way you probably should be in touch with AppleCare, you have 90 days of free AppleCare telephone support. They can usually help on issues like this. If you don't know the phone number please use http://support.apple.com/kb/HE57 to help find the number in your country.

Crystal Reports - Charts - Restricting the data points on the X-axis

Hi,
Is there a way to restrict the number of points to display on the x-axis of a crystal chart keeping the number of data points the same.
For example, if the chart plots date vs value points and the data for the chart is from 1980 to 2009. This means the data points on the x-axis appear very close to each other.
I need a way to show the chart with all data from 1980 to 2009 but limited x-axis labels. Is there a way to configure the number of labels to show on the x-axis.
Thanks!

Thanks for the answer.
"Right click on one of the x axis labels and select Group (X) Axis Options...
On the Layout tab there is an option to Skip Group Labels, check this and enter in the number of labels you want to skip". Is there a way to do this from a .NET client or via a formula field in Crystal itself. The data points is going to be dynamic, hence the requirement is to dynamically configure the "number of labels" to be skipped.
Thanks.

How to select all single values in the header area

Dear Experts
I got a request that the user wants to select a single value or all single values in the header area. E.g. if the values from characteristic master data are A, B, C and D, the selection can be one of these values or all of them. With the standard BPS configuration, due to the unique combination in the header area, selection of 'All' single values is not possible. Is there a way to select all single values in the header area?
Thanks, Jessica

Hi Jessica,
Here is a solution where you need not to change your planning layout or to create a new variable or any exit function.
Step 1 - Maintain master data value 'ALL' in the required characteristic.
Step 2 - Create a copy function to copy all the required data records to 'ALL'. you can use standard copy function where you have to include only this characteristic in the fields to be change.
Copy -
From = all values (A,B,C,D etc)
To = "ALL".
Step 3 - Call this function on layout opening. you can include it in the planning folder and change the function attribute to call it on layout opening.
Step 4 - Create a standard Delete function. you have to call this function on save operation. In this function, you have to delete all data records present in the buffer where required char contains 'ALL' value.
This approach can impact the performance of the planning application. It depends on the number of data records you are dealing with. Standard Copy and Delete functions are pretty fast in nature.
I hope it will help you. please let me know if you need more inputs.
Regards
Tarun

Line Graph repeats the starting data point at the end also

Hi,
We have a Line Graph as below. This graph is used to show the Salary changes of a person, over time.
But this graph shows an additional non existing data point. Basically it shows the starting data point once again at the end of the other data points.
The model VO for this graph, does not contain this additional data point record. But the graph repeats the starting data point at the end also.
In the screen-shot you can see that, the graph has three data points. But the table has only two. The first data point in the graph is repeated as the last data point.
Is this a Bug..?
Or an issue with the usage of the DVT tags?
The code is given below.
Please advice.
12 <dvt:graph id="lineGraph1" value="#{bindings.SalaryHistory.graphModel}"
13 graphType="LINE_VERT_ABS"
14 shortDesc="#{HcmEmploymentTopGenBundle}"
15 markerDisplayed="true"
16 continuousTimeAxisInterval="CTAI_DAY"
17 contentDelivery="immediate" animationOnDisplay="AUTO"
18 imageFormat="FLASH" stylePath="April"
19 timeSelectorListener="#{backingBeanScope.AssignmentChangesAndSalaryBean.changeTime}"
20 timeAxisType="TAT_MIXED_FREQUENCY" dynamicResize="DYNAMIC_SIZE"
21 inlineStyle="height:40em;"
22 binding="#{backingBeanScope.AssignmentChangesAndSalaryBean.asgSalaryGraph}">
23 <dvt:background>
24 <dvt:specialEffects/>
25 </dvt:background>
26 <dvt:graphPlotArea/>
27 <dvt:seriesSet>
28 <dvt:series/>
29 </dvt:seriesSet>
30
31 <dvt:o1Axis scrolling="asNeeded"/>
32 <dvt:y1Axis/>
33 
34 
42 <dvt:o1MajorTick/>
43 <dvt:o1TickLabel/>
44 <dvt:o1Title id="o1Title1">
45 <dvt:graphFont id="graphFont1"/>
46 </dvt:o1Title>
47
48 <dvt:attributeFormat id="af1" name="DateFrom">
49 <af:convertDateTime pattern="#{applCorePrefs.dateFormatPattern}" />
50 </dvt:attributeFormat>
51
52 <dvt:markerText>
53 <dvt:y1Format>
54 <af:convertNumber pattern="#{applCorePrefs.numberFormatPattern}"/>
55 </dvt:y1Format>
56 </dvt:markerText>
57
58
59 </dvt:graph>

If I understand your question, this from the Pages online help may give the answer:
To mark line, area, and scatter charts with data point symbols:
Select the entire chart. You can also select the chart series (the line or area shape) that you want to mark with data point symbols.
Click Inspector in the toolbar, and then click the Chart Inspector button.
Click Series (except for scatter charts).
Choose a symbol from the Data Point Symbol pop-up menu.
Choose one of the following options from the Symbol Fill pop-up menu:
To fill the symbol with the same color as its outline, choose Use Stroke Color.
To fill the symbol with a solid color, choose Color Fill, click the Fill color well, and pick a color.
To fill the symbol with a gradient, choose Gradient Fill and use the gradient controls to set the colors and change the angle of the gradient.
To fill the symbol with an image, choose Image Fill and select the image you want. You can also resize the image by choosing an option from the pop-up menu above the Choose button.
To fill the symbol with a tinted image, choose Tinted Image Fill and select the image you want. Click the color well to the right of the Choose button to change the tint color. You can also resize the image by choosing an option from the pop-up menu above the Choose button.

OFI_AP_4 Delete all data and REINIT the load to FIAP ODS and Cube

Hi bw GURUS I need a quick help, I have requirement to Delete all data and REINIT the load to FIAP ODS and Cube i have data source ofi_ap_4, please tell me what should i do as i know LO extraction but whats is the transaction code to run the set job for FIAP like for Purchasing I have OLI3BW now tell me what will be the steps to reinit the load to fiap ods and cube.
i know this much as below
Delete the data from cube and ODS
Delete the Init in Cube AND ods NOW reinit i mean load the init, but now problem is before doing that i need to run the set up job or tell me what are the steps please
its very important since i am doing in production
thanks
Soniya

You are right by your approach to update from PSA to ODS as u have wrritten before. Just got to PSA tree select the PSA request and choose update Immediatly or scedule for update.
(and if u have 0FI_GL_4 but u r not using it ..it is fine. I was telling that in case u have that and you are trying to use somethin with 0FI_AP_4)

SSRS 2008 Column Chart with Calculated Series (moving average) "formula error - there are not enough data points for the period" error

I have a simple column chart grouping on 1 value on the category axis. For simplicity's sake, we are plotting $ amounts grouping by Month on the category axis. I right click on the data series and choose "Add calculated series...". I choose moving average. I want to move the average over at least 2 periods.
When I run the report, I get the error "Formula error - there are not enough data points for the period". The way the report is, I never have a guaranteed number of categories (there could be one or there could be 5). When there is 2 or more, the chart renders fine, however, when there is only 1 value, instead of suppressing the moving average line, I get that error and the chart shows nothing.
I don't think this is entirely acceptable for our end users. At a minimum, I would think the moving average line would be suppressed instead of hiding the entire chart. Does anyone know of any workarounds or do I have to enter another ms. connect bug/design consideration.
Thank you,
Dan

I was having the same error while trying to plot a moving average across 7 days. The work around I found was rather simple.
If you right click your report in the solution explorer and select "View Code" it will give you the underlying XML of the report. Find the entry for the value of your calculated series and enter a formula to dynamically create your periods.
<ChartFormulaParameter Name="Period">
<Value>=IIf(Count(Fields!Calls.Value) >= 7 ,7, (Count(Fields!Calls.Value)))</Value>
</ChartFormulaParameter>
What I'm doing here is getting the row count of records returned in the chart. If the returned rows are greater than or equal to 7 (The amount of days I want the average) it will set the points to 7. If not, it will set the number to the amount of returned rows. So far this has worked great. I'm probably going to add more code to handle no records returned although in my case that shouldn't happen but, you never know.
A side note:
If you open the calculated series properties in the designer, you will notice the number of periods is set to "0". If you change this it will overwrite your custom formula in the XML.

Selecting all consecutive paragraphs of the same style in GREP?

Hello,
Is there anyway to select all consecutive paragraphs of the same style using GREP and append something after it?
My problem is that I need to add a tag to the start and end of all footnote sections, they are not embedded in InDesign, but rather they are simply listed after every section. I've managed to add the tag to the start of every footnote section but how can I use GREP to select all of the footnotes and add the tag after it?
I have tried (among others)
(.+)
but it only finds each footnote one at a time, rather than the whole section's worth of them.
Leaving the Find field blank and just using Find Format will find the whole section but I can't find anyway to append the tag. I tried
$0\rTAG
but it seems to cut a lot of the footnotes out randomly?
There must be a way to do this?

It's possible to have a GREP span multiple paragraphs (use the flag (?s) for this), but I think it would have the same result as your 2nd try, just supplying the paragraph style name. Since that fails, I suspect it's just too much text to fit in '$0'.
How about circumventing the problem in its entirety? Put your paragraph style name in the Find Formatting field, then search for
\r(?!.)
-- this will find the very last hard return in that style "followed by nothing". You can replace it with
\rTAG\r
-- it needs a return right after 'TAG' because otherwise this will be pasted in front of the next (unrelated) paragraph.

How to make use of adjacent data elements within the same buffer

Hi,
         Does anyone know how to make use of adjacent data elements within the same buffer? To make my question clearly, I would like to give you an example. In my application, I set "sample to read" as 10 which means at each loop 10 data samples will be taken into a buffer. Now, what I would like to do is to do some calculations on adjacent data samples in same buffer. I tried to use "shift register" for this, but it seemed to me that it only can deal with the calculation between data from adjacent loops. In other words, it skips 9 data elements and take the 10th one for the calculation.
         Here I also attach my VI showing what I did.
    Thank you very much in advance,
                        Suksun
Attachments:
wheel_encoder_1.vi ‏98 KB

Hi Suksun,
      I hope you'll forgive me for distilling your code - mainly to understand it better. I tried to duplicate your logic exactly - which required reversing the "derivatives"-array before concatination with the current samples array. As in your code, the last velocity is being paired with the first position. If first velocity is really supposed to be paired with first position, just remove the "Reverse 1D Array" node.
cheers
Message Edited by Dynamik on 01-07-2006 03:17 AM
Message Edited by Dynamik on 01-07-2006 03:19 AM
When they give imbeciles handicap-parking, I won't have so far to walk!
Attachments:
encoder2.GIF ‏14 KB
encoder2.vi ‏102 KB

Intel iMac running 10.5.8. Belonged to a relative who has passed away. I want to wipe all data and give the iMac to my grandson. I have no install discs. How do I proceed?

Intel iMac running 10.5.8. Belonged to a relative who has passed away. I want to wipe all data and give the iMac to my grandson. I have no install discs. How do I proceed?

Contact Apple (call AppleCare) and for a nominal fee the discs will be replaced. You can do that or purchase Snow Leopard (still availble from Apple for $20) and do an erase and install of OS X making the machine like a new machine.

I have a macbook air and and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device"

I have a macbook air and and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device detected" and the drop down bar is grey and locked.

I have a macbook air and and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device detected" and the drop down bar is grey and locked.

Ipod 5th generation will not turn on, charge, or connect to macbook laptop. i was using it for music then all of a sudden the screen went black and was unresponsive. i have tried using other cords. also my home button is broken. someone please help!

ipod 5th generation will not turn on, charge, or connect to macbook laptop. i was using it for music then all of a sudden the screen went black and was unresponsive. i have tried using other cords. also my home button is broken. someone please help!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

After loading the internet using Firefox AND then selecting NEWS and a delay the Error "The MSN toolbar has encountered an error. etc" occurs. Also, when browsing some searches are "REDIRECTED"!

After loading the internet using Firefox AND then selecting NEWS and a delay the Error "The MSN toolbar has encountered an error. etc" occurs. Also, when browsing some searches are "REDIRECTED"!
== This happened ==
Every time Firefox opened
== Hard to say but have been trying to diagnose for at least a week.

Original message wouldnt post with attachments - trying again....
Attachments:
secondclickheredialog.jpg ‏40 KB
FirstDialog.jpg ‏19 KB
Firstclickheredialog.jpg ‏16 KB

I use iPhone, iPad and MacPro, all works fine but the newly purchased iMac does not receive emails on time - always later than other devices. Why and how to fix?

I use iPhone, iPad and MacPro, all works fine but the newly purchased iMac does not receive emails on time - always later than other devices. Why and how to fix?

Go to Mail Preferences
Click on the General tab
Set "Check for New Messages:" to "Every Minute"
Hope this helps

Using band zoom to select all data points within the band

Similar Messages

Maybe you are looking for