Using cfexecute to start FMLEcmd.exe

Hi!
I'm trying to use <cfexecute> to start the command line utility to start a fmle session.
Coldfusion is running locally of course not on a remote server :-)
I am trying to use Coldfusion to make a sort of an easy start stop interface for the FMLE.
I could just run it in the command window (cmd.exe), but I'm trying to make it look a bit more "sexy".
So far it is not working out too good I'm affraid :-(
I was wondering if anyone could help.
Here is the code:
<cfexecute name="C:\Program Files (x86)\Adobe\Flash Media Live Encoder 3.2\FMLECmd.exe"
arguments="/p C:\Coldfusion10\cfusion\wwwroot\simpleovp\test.xml"
variable="data"
timeout="10" />
<cfoutput>#data#</cfoutput>
Here is the typical output:
Adobe(R) Flash(R) Media Live Encoder Command Line Utility v 3.2.0.9932 Copyright(C) 2009-10 Adobe Systems Incorporated. All rights reserved. Thu Dec 06 2012 19:12:38 : Audio Settings :- Device : Microphone (USB Audio Device) Format : Mp3 Mono Sample Rate : 22050 Hz Bit rate : 48 Kbps Volume : 75 % Stream to Flash Media Server :- FMS URL : rtmp://flhub0.c07147.cdn.qbrick.com/07147 Backup URL : Stream Name: norstat1,0lfasaud Thu Dec 06 2012 19:12:38 : Selected audio input device: Microphone (USB Audio Device) Thu Dec 06 2012 19:12:38 : FMLE with UID "rtmp://flhub0.c07147.cdn.qbrick.com/07147+norstat1,0lfasaud" is already registered in Shared memory. Please try changing your first output streamname or filename(if not streaming to FMS). Stopping encoding session. Thu Dec 06 2012 19:12:38 : Closing Application.
I thought it might be that cf did not have sufficient user righs to run this properly because the profile is running just fine in a command line window (cmd.exe).
I went in and changed the Log on as in the Coldfusion Application Server service to an account with admin rights, rebboted, but are getting the same result.
Any ideas?
Thanx.
J

Let me know If you find a solution.

Similar Messages

I am using windows 7 starter,just downloaded itunes 10.5.2,while install getting prompt,cannot read ipodservice.exe,and after install itunes is not read iphone or ipod while plugging in through usb cable. Any ideas ,whats going wrong?

I am using windows 7 starter,just downloaded itunes 10.5.2,while install getting prompt,cannot read ipodservice.exe,and after install itunes is not reading iphone or ipod while plugging in through usb cable. Any ideas ,whats going wrong?

problem solved.
I phone 4s screen froozen

FMLEcmd.exe keeps crashing when streaming to flash

Twice in the past 4 days FMLEcmd stopped with the following error logs. I don't know where to start trying to fix this.
Faulting application name: FMLECmd.exe, version: 3.2.0.9932, time stamp: 0x4d00aa89
Faulting module name: FMLECmd.exe, version: 3.2.0.9932, time stamp: 0x4d00aa89
Exception code: 0x40000015
Fault offset: 0x0013b198
Faulting process id: 0xba8
Faulting application start time: 0x01ce4a6a74b19f25
Faulting application path: C:\Program Files (x86)\Adobe\Flash Media Live Encoder 3.2\FMLECmd.exe
Faulting module path: C:\Program Files (x86)\Adobe\Flash Media Live Encoder 3.2\FMLECmd.exe
Report Id: caa310a6-b6b8-11e2-a298-b4b52faf9996
Faulting application name: FMLECmd.exe, version: 3.2.0.9932, time stamp: 0x4d00aa89
Faulting module name: FMLECmd.exe, version: 3.2.0.9932, time stamp: 0x4d00aa89
Exception code: 0x40000015
Fault offset: 0x0013b198
Faulting process id: 0x119c
Faulting application start time: 0x01ce4bfcc98397a0
Faulting application path: C:\Program Files (x86)\Adobe\Flash Media Live Encoder 3.2\FMLECmd.exe
Faulting module path: C:\Program Files (x86)\Adobe\Flash Media Live Encoder 3.2\FMLECmd.exe
Report Id: 3434c03e-b821-11e2-a298-b4b52faf9996

I too have had similar problems but I'm running the latest Snow Leopard version. Random black outs while using Firefox and surfing the net, using expose' to swap windows, or having iTunes in the background. Screen is totally unresponsive to anything but a hard boot and external monitor shows "no signal". Based on the forums it seems like this is a larger systemic issue. Called support with not much help....but had to cut short due to time for work.

What html code will start an EXE (program) with a click on a webpage link?

The code in bold below worked. After I switched my browser from IE 11 to Firefox to get the hover on hotspots to work, the program gave me this error message. I moved the EXE file to my local file folder and tried it as shown below. Still no success. Any suggestions?
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>Family Tree Charts</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" /><style type="text/css">

</style></head>
<body link=blue vlink=blue>
<table width="100%" height="25" border="0" cellpadding="4" cellspacing="0">
<tr>
 <td width="93%" height="27" bgcolor="#EFEFEF"> <div align="center">
 This Software Allows You To Review Neat Charts of Your Family Tree </div></td>
 <td width="7%" bgcolor="#CCFFFF"> <div align="center"><A href="Mementos_Menu.html">Back</a></div></td>
</tr>
</table> <center>
 
Click the link below to download a special software program for your PC. 
 
<a href="http://jdmcox.com/">Cox Website</a> 
ITEM 1 (AT THIS WEBSITE) IS THE FAMILY TREE CHART PROGRAM. 
It is called Simple Family Tree 
<table width="80%" border="2" cellspacing="2" cellpadding="2">
<tr>
 <td width="49%" align="left" valign="top">Click the link below to use this special software program after you download and install the program. 
 

<a href="C:\Users\Tom and Polly\Documents\Genealogy CD\Simple Family Tree\Simple Family Tree.exe">Family Tree Charts Program</a> 
Click the "run" button for both warning messages. 
Click the "READ THIS!" menu option when the program opens. 
Click "X" in the upper right to close the program. 
You can update the family data in future years with this program too.
 </td>
 <td width="51%" align="left" valign="top">NOTE 1: Be sure your HTML code for this webpage has a proper line to link to the location where the software was installed. You can use NOTEPAD to make HTML code changes. My existing line is: 
 "c:\program files (x86)\simple family tree\simple family tree.exe" 
 The underlined portion will need to agree with where the program was installed. Just change the directory (see underlined sample above). Good luck. If I am still living, call me. 
 NOTE 2: After you download, install, and try to use the program, you may get an error message window that looks like this -"0 FAMS @F191 @ FAM". This means you have an individual record in your GEDCOM file that does not have a parent. Be sure all GEDCOM records have at least one parent even if you must name the parent UNKNOWN.</td>
</tr>
</table>
 </center>
<table width="100%" border="0" cellpadding="2" cellspacing="0" bgcolor="#CCCCCC">
 <tr>
 <td bgcolor="#EFEFEF"> ©2002 Sales and People</td>
 </tr>
</table></body>
</html>

Herbert:
Here is my latest code attempt, but I get messages about the lines in BOLD that I do not understand.
Perhaps you will see what I need to fix. Sure appreciate what you have found and shared with such a neophyte (aka dumbo).
Tom

function RunExe(path) {
try {
var ua = navigator.userAgent.toLowerCase();
if (ua.indexOf("msie") != -1) {
MyObject = new ActiveXObject("WScript.Shell")
MyObject.Run(path);
} else {
netscape.security.PrivilegeManager.enablePrivilege("UniversalXPConnect");
var exe = window.Components.classes['@mozilla.org/file/local;1'].createInstance(Components.interfaces.nsILocalFile);
exe.initWithPath(path);
var run = window.Components.classes['@mozilla.org/process/util;1'].createInstance(Components.inteinterfaces.nsIProcess);
run.init(exe);
var parameters = ["/c start Simple Family Tree.exe"];
run.run(false, parameters, parameters.length);
} catch (ex) {
alert(ex.toString());
This Software Allows You To Review Neat Charts of Your Family Tree
Back
Click the link below to download a special software program for your PC and your GED file.
*Cox Website*
ITEM 1 (AT HIS WEBSITE) IS HIS FAMILY TREE CHART PROGRAM.
It is called Simple Family Tree
Click the link below to look at my GEDCOM file contents. Instructions are provided in the READ THIS menu option at the top of the window.
*Show Yarnall Chart*
*Return to this webpage by clicking on the backarrow after looking at the chart.
You can update the family data in future years with this program too.*
©2002 Sales and People
Date: Thu, 2 Jan 2014 02:09:18 -0800
From: [email protected]
To: [email protected]
Subject: What html code will start an EXE (program) with a click on a webpage link?
 Re: What html code will start an EXE (program) with a click on a webpage link?
 created by Herbert2001 in Dreamweaver support forum - View the full discussion
Perhaps this might be helpful:
https://addons.mozilla.org/en-US/firefox/addon/opendownload-10902/
It allows executables in Firefox to be run - it is an extenstion, though, so it must be installed in Firefox before your page will work.
Another option is this solution, but it will still require a manual change in Firefox:
http://forums.mozillazine.org/viewtopic.php?f=19&t=803615
Or this: http://stackoverflow.com/questions/6472435/running-exe-in-firefox-why- do-i-get-an-error
However, you will still have problems with getting it to work cross-browser. Honestly, browsers are not supposed to have access like that to the client side file system, which absolutely makes sense for the web.
That is why you may have to approach the solution from a different angle - perhaps create a server side cloud version of your application(s) which can be easily accessed and run by your family members. I believe you used C to develop the applications? Although I have no experience with this framework, Wt might be a solution to convert your projects to server side applications:
http://www.webtoolkit.eu/wt
Good luck!
 Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5972893#5972893
 Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5972893#5972893
 To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5972893#5972893. In the Actions box on the right, click the Stop Email Notifications link.
 Start a new discussion in Dreamweaver support forum at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Unable to open PDF files with Adobe Reader v11.0, in Windows 8, using C# Process.Start()

I have been able to open PDF docs using C# API Process.Start("Full_path_To_the_PDF_File")
in windows 7 or windows 8 with all previous versions of Acrobat32 reader.
However, with v11.0, the same command, in Windows 8,
does not open the PDF document. I can see the Acrobat(32) started in the task manager,
but the document does open. Not sure how I can troble shoot
this problem.
As a test, I created ta batch file, with a simple command that calls AcroRD32.exe with a PDF file as a parameter. When I executed the batch file in cmd window, it opens the PDF document. If I execute the batch file using Process.Start(), again it does not
work. The CMD window opens but, the document does not open. The cmd window just stays open.
So, there must be something with opening the PDF using the Process.start() command.
Any help would be appreciated.
Thank you,
- Kam
Intel Engineer

This is something Adobe has to troubleshoot. Probably the pdf file association is broken. I suggest you to visit forums.adobe.com to ask Adobe about your problem.
Visual C++ MVP

Netbeans 6.9.1 'cannot start java.exe'

Hello,
I've installed the JDK and then Netbeans 6.9.1 (Windows 7). When I try to run a JavaFX application, it fails ( saying 'cannot start java.exe' ).
Just found [http://www.netbeans-forum.de/viewtopic.php?f=9&t=4220|http://www.netbeans-forum.de/viewtopic.php?f=9&t=4220]
But locating the JDK on a different place ( using a path without whitespaces ) also didn't help.
What could be the problem?
thanks
Edited by: Lichti on Sep 4, 2010 1:17 PM

You can also specify which JDK Netbeans uses (as the default JDK and thus as the JDK used by the JavaFX module) by modifying netbeans_jdkhome in C:\Program Files\NetBeans 6.9.1\etc\netbeans.conf

Problems with starting jstart.EXE (help for/from anyone needed!)

Dear all,
the last days I have spent some time trying to install CE7.1 and also CE711 EHP1. The installation itself worked great: no errors were reported during intallation. But somehow the instance CE1 never starts up completely. As I have found out, and so do many many many others, the problem lies in starting "jstart.EXE" (Please check your SAP Management Console: CE1 => matrix 0 => Process List).
The following behaviours I have monitored:
1. When trying to start the CE1 instance jstart.EXE tries to start but stops after a while. So the J2EE Server is not started. This behaviour is monitored and reported by many posts here at SDN, but it seems that "final" solution has been posted, which is valid for anyone. At least non of the hints could help me.
2. I have monitored that the status of jstart.EXE seems to hang at status "Starting the processes" (I have waited more than 25 minutes).
To all the experienced and anyone else:
PLEASE post all you hints here! This issues seems to be a very common issue and is not really solved. Other posts did not help me so far.
In my case (case 2 from above) I can provide the following information:
Today (December 3rd, 2008) I have installed CE7.1_SR5. Hardware requirements are fullfilled by 100%.
I have to mention that I have installed some old CE or NW J2EE version on the same system like about one year ago, and I uninstalled it after only one week.
Maybe what the jstart.EXE problems are somehow related to the license: does the "uninstallation" leave some data back in the system, which could be used by later installs in order to check the license (wich is only a 90 day license)?
Who can help?
What is your experience with jstart.EXE?
Any help is very welcome. I am sure not only for me!
Thanks,
Pars

Hi,
OK, if jstart in the "Process List" has status status "Starting processes" I guess what you have to monitor is the "AS Java Process Table". It should show which processes are being started at the moment.
If I remember correctly the first in this list are offline deployment/bootstrap (which need to run to prepare the instance after updates). After that two processes should be started: the icm and server0 (if you have created more nodes there might be more serverX processes).
So which one really fails? If it runs for long time and then goes down I suspect it might be server0 (that's the actual java server process). In this case you'll want to check for errors in <drive>/usr/sap/<SID>/JXX/work/_server0. files or the default trace.
Another way to determine what goes wrong might be to check the <drive>/usr/sap/<SID>/JXX/work directory. If you sort traces by date you'll probably get some idea. dev_<process> are the jstart output, the std_<process> is the actual stdout of the process, if the process failed probably the std file contains some more information on why it happened.
If you cannot find the problem is there a way to share the last files from the work directory. If it's a common problem we must identify and add it to the TS guide ...
Best regards, dido

Using CFEXECUTE

I am trying to incorporate a cfexecute before running a
cfquery. We do not have MS Access loaded on our web server but the
cmd file basically opens MS Access, runs a macro and then closes MS
Access but it is working.
Following is the cmd file - "C:\Program Files\Microsoft
Office\Office10\msaccess.exe"
d:\inetpub\wwwroot\\departments\NBProdReports.mdb /x mDoTimeRecords
It does not run the .cmd file so that the macro runs. Any
suggestions?

In addition to Mr Black's suggestions, take a look at these
two entries about using cfexecute on Ben Forta's blog
http://www.forta.com/blog/index.cfm/2006/7/31/Using-CFEXECUTE-To-Execute-Command-Line-Util ities
http://www.forta.com/blog/index.cfm/2006/9/11/A-Couple-Of-CFEXECUTE-Gotchas

Execute .bat file using cfexecute tag...

Hello,
I am trying to execute a batch file using cfexecute tag. This
batch file needs 1 command line arguement, which I am passing using
arguments
Text attribute.
When I run my batch file directly from command prompt, it
works perfectly. but while using cfexecute, it doesn't seem to do
anything.
Note:- I am trying to encrypt a txt file using GPG algorithm
in the batch file.
Thanks in advance!
Manju

Hello,
you have probally worked this out but if any of this helps :)
I run an application that needs to print via dos command, so
my cfm page makes a batch file writes some arguments to it then
calls it with a cmd. the code is below if any of it helps im glad.
(creates name for my bat file)
<cfset BFname = '#namevariable#' & '.bat'>
(sets up the text I need in the bat file)
<cfset content = 'copy
"c:\inetpub\wwwroot\mct\picklist.txt"
\\MyPrintServer\ThePrinter'>
(writes the bat file with the text in the content var)
<cffile action="write"
file="c:\inetpub\wwwroot\mct\#BFname#" output="#content#">
(calls cmd to run the bat file)
<cfexecute name="c:\windows\system32\cmd.exe"
arguments="/c c:\inetpub\wwwroot\mct\#BFname#"
outputfile="c:\inetpub\wwwroot\mct\log_output.txt"
timeout="1"></cfexecute>
Regards Guy

Crystal Report Runtime start splwow64.exe on windows 64 OS

Hi,
We are using the Crystal Reports runtime in our application. We are utilizing the runtime through the COM interface. Recently a client of us installed our application on windows 2003 64-bit. Now whenever a report is created windows starts splwow64.exe. As i understand this is a process started by windows to ensure compatibility with 32-bit. Normally this process is released when the job is done. However in our case the proces is never released and remains exclusively locked. Other application on the same machine also need this splwow64 process and this is now causing a problem.
When the other applications on the server start splwow64 first it released when the job is done. It is only when creating a report (pdf) using the CR-runtime, it is never released.
Any help would be very much appriciated!
TIA
Ronald

Hi Ronald,
XI is past it's end of life so nothing we can do to fix it now. Try CR XI R2 ( 11.5 ) with Service Pack 6, it has a better chance of working on 64 bit OS's.
Go to this link: http://www.sdn.sap.com/irj/boc and download the trial version of CR XI R2 and use your XI keycode, then apply the patches which you can get to by clicking on the BusinessObjects tab above, then Downloads.
Direct link to the Trial version: http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx
Searching on this dll it appears to be the 32 to 64 bit Thunking spooler that converts 32 bit print jobs into 64 bit jobs ( or the other way around ). CR only supports 32 bit runtime so it may be that your print driver has issues. If you can find one that is 32 bit only but works on 64 bit OS then that will likely resolve the issue.
Otherwise I suggest you contact the printer manufacture and ask them how to make their 64 bit driver work with a 32 bit app.
Thank you
Don

Everytime I start Setup.exe, nothing happens.

-Everytime I start Setup.exe, nothing happens.
Though Setup.exe shows up at the Processes Tab of Windows Task Manager *Troll*
Anyone had the same problem before?
Oh Btw, I'm using Windows 7 Home Premium.
Running as administrator and troubleshooting compatibility don't work also.
Thanks for the help. Cheers!

Wow. Thanks for your urgent reply Mylenium, no wonder you're a community professional. c",
     It's After Effects CS4.
     The computer would be a DELL XPS M1530 running with (though not supported) a Windows 7 Home Premium.
     Are what is stated above all your needed information?

Jdev9i 9.0.2 100% CPU hang upon starting jdevw.exe

Starting jdevw.exe (9.0.2) gets me a 100% CPU utilization hang. Any ideas?
System: Dell latitude, P3 550Mhz, 256KRam.
JSDK is 1.4.0
Some env vars:
PATH=c:\j2sdk140\bin;C:\Oracle\Ora81\bin;C:\Oracle\ORADES~1\bin;C:\Oracle\Ora81\Apache
JAVA_HOME=c:\j2sdk140
JDEV_HOME=c:\oracle\jdev9i
Thank you

Starting jdevw.exe (9.0.2) gets me a 100% CPU utilization hang. Any ideas?
System: Dell latitude, P3 550Mhz, 256KRam.
JSDK is 1.4.0
Some env vars:
PATH=c:\j2sdk140\bin;C:\Oracle\Ora81\bin;C:\Oracle\ORADES~1\bin;C:\Oracle\Ora81\Apache
JAVA_HOME=c:\j2sdk140
JDEV_HOME=c:\oracle\jdev9i
Thank youThe IDE should run under JDK 1.3.1. Preferable 1.3.1_02. There is an issue with the MDI windows getting into an infinite repaint look when maximized under JDK 1.4.
You can still define the JDK 1.4 definition and use it for your code, however the IDE should run under JDK 1.3.1.
Thanks,
Rob

Unable to run my application using java web start

i have created one application and use java web start to download the application. all the files are succesfully downloaded but when i try to run the application an expected error occur. this only happen in my machine but not in other machine i'm currently using
-jsdk1.4.2
-windows 2000 professional 5.00.2195 service pack 3
-pentium III 870 Mhz
-x86-based PC
-RAM 256 Mhz
Anyone knows why, plz help me with this puzzle

Please post the information from the Web Start "Exception" and "Wrapped Exception" tabs when the error occurs (I assume the error was in fact unexpected ;-)
A blind stab in the dark would be that you don't have write permission to the cache directory on the second machine. Also worth checking that the proxy settings on the second machine are the same as the first (if they are on the same network).

On MacBook Pro unable to print webpage; I get a single blank page. But I can print using Safari. Started last week while using Firefox 3.6. I downloaded Firefox 5.0--same problem.

On MacBook Pro unable to print webpage; I get a single blank page. But I can print using Safari. Started last week while using Firefox 3.6. I downloaded Firefox 5.0--same problem.

I am now able to do live broadcasts with my i-sight, but my original problem still exisits....
Unsolved Problem:I need to be able to broadcast from CamTwist as CamTwist is the only program that will allow me to do what I need to do. Justin.tv and Ustream.tv do not recognize CamTwist for reasons I can not explain.

ITunes 10 starting conhost.exe and it won't die

I updated to the latest version of iTunes about 3 weeks ago (haven't run it in over a week, due to this problem). Immediately after installing, I began seeing conhost.exe start multiple times. It took me a week to figure out which installed software was causing the issue, and narrowed it down to iTunes.
When iTunes runs (with or without its various services started), it starts conhost.exe. Whatever it is running in that console causes every other process that starts after conhost.exe starts to never end. I had taken to killing the conhost.exe processes, but they would simply restart when the iTunes services were running.
Basically, what this means is that when iTunes and related services were running in the background, HUNDREDS of processes that Windows starts and stops automatically would NEVER DIE. I once came home to find over 500 processes running, and before I figured out it was iTunes causing the problem, had to restart my computer every night when I got home, because the computer wouldn't respond. Each of those processes may have been small, but there were hundreds of them, taking up all available RAM.
In case anyone is curious (which I'm sure may happen), I'm running on a self-built Core 2 Quad 2.0GHz, 8GB of RAM, Windows 7 Ultimate x64, with somewhere near 3TB of storage space (approximately 60% of which is available). There are no current hardware issues, all drivers are up to date, and air flow through the case is taken care of by 8 case fans. Keeps my processor temps right around 100F (which is a lot cooler than they were over the summer).
The iTunes.exe version information says it is version 10.0.0.68. I know there's a 10.0.1 out now, but can't find out whether or not it resolves this issue.
Anyone have any ideas? This may be specific to Windows 7 x64; I haven't been able to find any solutions in my searching, both here and on Google.
Thanks.

Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

Using cfexecute to start FMLEcmd.exe

Similar Messages

Maybe you are looking for