Using clickboxes and not getting response to display
I'm building a scenario and have 2 standard objects that I'm using as buttons. I created 2 clickboxes --1 for each item with the correct/incorrect response path. When I preview/publish, the correct response will work, but not the incorrect response. What am I missing?
If you were intending to have the user continue clicking the same locations on the screen repeatedly to get either Correct or Incorrect feedback, then you might be looking at a situation that would suit the Event Handler widget:
http://www.infosemantics.com.au/adobe-captivate-widgets/event-handler-interactive
It has Preference settings that allow you to Disable Continue (thus remaining at the same frame on the timeline) and Reset Success Fail Criteria after Action (thus enabling repeat clicks and feedback captions).
Free trial download versions of this widget are available here:
http://www.infosemantics.com.au/adobe-captivate-widgets/download-free-trial-widgets
Similar Messages
-
How do I use CreateBookmarksFromGroupTree and NOT get a "temp_" for my top level?
I have a report that I have created that uses uses groups and I wanted export a PDF using the CreateBookmarksFromGroupTree option. While that works, I get an ugly top level bookmark name that starts with "temp_" then followed by two GUIDs "temp_13fef8e3-30ec-4bc5-ba77-b55d23c95e8f {87823BCB-7789-407C-8A7F-5096BE07A83E}".
So, how do I:
1) Get rid of this top level so it matches the Crystal Viewer (which has multiple top level bookmarks)
2) Put in a name of my own choosing as the top-level bookmark.
<!break>
Any help or suggestions would be appricated.
Thanks,
JimI would very much like to know how to avoid this also!!!
-
The question basicaly says it all. I mean I verified the account on my email and everything and on Imessage I set it up so that on my Ipod only messages would be sent and recieved from my email...but it never fully sends. It says sending and the bar almost fills up but then it says failure. What am I doing wrong?
iOS: Troubleshooting Messages
-
My wife and I each have an apple ID and share one macbook pro. Is it possible to use the iCloud on our shared macbook pro and our two separate iPhone 5's and not get each others information confused?
Once you setup your wife's account you can enable fast user switching to make it easy to switch accounts:
OT -
How can I get my data from a old iPad to a new iPad using iCloud and not iTunes
How can I get my data from a old iPad to a new iPad using iCloud and not iTunes
Restore from the iCloud backup - assuming that you were backing up to iCloud in the first place. If you weren't using iCloud for backup - then you are out of luck.
If you were backing up to iCloud - you have to erase all contents on the iPad in Settings>General>Reset>Erase all content and settings - before you can restore from the iCloud backup.
Read this article before you do anything else
http://gigaom.com/apple/ios-101-set-up-and-restore-from-icloud-backup/ -
my phone is not getting started,its displaying itunes sign and USB sign on the phone's screen. I have also restored and updated the phone however not getting started
It helped earlier but it has come back again. I don't know what to do. I tried what you said earlier but this time even this is not working either. And quite intrestingly my phone won't turn off. I turn it off, it goes off and then restarts on its own and then keep giving the same message again and again.
Could it be a charging cable, is there any chance that the cable which was working fine one day could turn to be "incompatible" with iphone the other day????????
Please help -
hello my name is leandro from months ago and am trying to connect with my apple id but informs me that it is wrong and I can not buy or upgrade my mac from the official website of apple can go with my ide but can not get response technical support'm from Argentina someone could help me
Apple ID security issues -
Call Apple Care and ask for the Account Security Team. They can assist you with your issue. -
i am using iphone 4s its under warranty , phone got automatically turn off even if has 50% battery and not get on until i connect to charger . if i go to service center will they change my phone ? and will i have to pay anything if its battery issue ???/
Take it in and see what the technicians say is wrong and then how they want to handle the iPhone. If the iPhone has a problem covered by the warranty then you should have no problems.
-
Issue: Not getting response when the document is having special chars
Please help following issue: Not getting response when the document is having special chars(Use any doc with special char(ex: &, $, <, >,.....) TestErrorFour.doc
Error message:
System.FormatException: Invalid length for a Base-64 char array. at
System.Convert.FromBase64String(String s) at
Summarize.Summarizer.AccumulateBroadcast(String filedata, String givenWords) in
c:\DocumentSummarizer\App_Code\Summarizer.cs:line 66
Code:
File 1:
import java.io.BufferedReader;
import java.io.FileInputStream;
import java.io.FileNotFoundException;
import java.io.FileReader;
import java.io.IOException;
import java.io.InputStreamReader;
import java.io.OutputStream;
import java.net.HttpURLConnection;
import java.net.URL;
import java.net.URLConnection;
import java.util.Properties;
import org.apache.poi.poifs.filesystem.POIFSFileSystem;
import org.apache.poi.hwpf.*;
import org.apache.poi.hwpf.extractor.*;
import com.lowagie.text.Document;
import com.lowagie.text.pdf.PRTokeniser;
import com.lowagie.text.pdf.PdfReader;
public class DocumentSummarizerClient {
static Properties loadProperties() {
Properties prop = new Properties();
try {
prop.load(DocumentSummarizerClient.class.getClassLoader().getResourceAsStream("vep.properties"));
} catch (Exception ioe) {
ioe.printStackTrace();
return prop;
public String getSummary(String fileName,String noOfWordsOrPercentage ){
String summaryInputData ="";
String summarizedData="";
String summarizerURL = loadProperties().getProperty("Summarizer.serviceURL");
try {
String fileExtension=fileName.substring(fileName.lastIndexOf(".")+1, fileName.length());
if (fileExtension.equalsIgnoreCase("doc")|| fileExtension.equalsIgnoreCase("txt")|| fileExtension.equalsIgnoreCase("pdf")) {
if (fileExtension.equalsIgnoreCase("txt")) {
BufferedReader bufferedReader = new BufferedReader(
new FileReader(fileName));
String line = null;
while ((line = bufferedReader.readLine()) != null) {
summaryInputData += line;
if(fileExtension.equalsIgnoreCase("doc")){
POIFSFileSystem fs = null;
fs = new POIFSFileSystem(new FileInputStream(fileName));
HWPFDocument doc = new HWPFDocument(fs);
WordExtractor we = new WordExtractor(doc);
String[] paragraphs = we.getParagraphText();
for( int i=0; i<paragraphs .length; i++ ) {
paragraphs[i] = paragraphs.replaceAll("\\cM?\r?\n","");
summaryInputData+= paragraphs[i];
if(fileExtension.equalsIgnoreCase("pdf")){
Document document = new Document();
document.open();
PdfReader reader = new PdfReader(fileName);
int pageCount =reader.getNumberOfPages();
for(int i=1;i<=pageCount;i++){
byte[] bytes = reader.getPageContent(i);
PRTokeniser tokenizer = new PRTokeniser(bytes);
StringBuffer buffer = new StringBuffer();
while (tokenizer.nextToken()) {
if (tokenizer.getTokenType() == PRTokeniser.TK_STRING) {
buffer.append(tokenizer.getStringValue());
summaryInputData += buffer.toString();
else{
System.out.println("This is Invalid document. Presntly we support only text,word and PDF documents ");
// String encoded =new String (summaryInputData.getBytes("ISO-8859-1"),"UTF-8");
String encoded=Base64Utils.base64Encode(summaryInputData.getBytes());
// encoded =new String (summaryInputData.getBytes("ISO-8859-1"),"UTF-8");
String parameters= "base64String="+encoded+"&noOfWordsOrPercentage="+noOfWordsOrPercentage;
summarizedData= postRequest(parameters,summarizerURL);
String slength= "<string xmlns=\"http://tempuri.org/\">";
if(summarizedData.contains("</string>")){
summarizedData= summarizedData.substring(summarizedData.indexOf(slength)+slength.length(),summarizedData.indexOf("</string>"));
summarizedData = replaceVal(summarizedData);
//System.out.println("<?xml version=\"1.0\" encoding=\"utf-8\"?><![CDATA["+summarizedData+"]]>");
// System.out.println("Summarized data "+summarizedData);
if(summarizedData.contains("Please enter the percentage")){
summarizedData="Data given cannot be summarized further";
else{
System.out.println("Data given cannot be summarized further");
summarizedData="";
} catch (FileNotFoundException e) {
return("The File is not found \n\n"+e.toString());
} catch (IOException e) {
return("The File is already in use \n\n"+e.toString());
} catch (Exception e) {
return(e.toString());
return summarizedData;
public static String postRequest(String parameters,String webServiceURL) throws Exception{
Properties systemSettings = System.getProperties();
systemSettings.put("http.proxyHost", loadProperties().getProperty("proxyHost"));
systemSettings.put("http.proxyPort", loadProperties().getProperty("proxyPort"));
System.setProperties(systemSettings);
String responseXML = "";
try {
URL url = new URL(webServiceURL);
URLConnection connection = url.openConnection();
HttpURLConnection httpConn = (HttpURLConnection) connection;
byte[] requestXML = parameters.getBytes();
httpConn.setRequestProperty("Content-Length", String
.valueOf(requestXML.length));
httpConn.setRequestProperty("Content-Type",
"application/x-www-form-urlencoded");
httpConn.setRequestMethod("POST");
httpConn.setDoOutput(true);
httpConn.setDoInput(true);
OutputStream out = httpConn.getOutputStream();
out.write(requestXML, 0, requestXML.length);
out.close();
InputStreamReader isr = new InputStreamReader(httpConn
.getInputStream());
BufferedReader br = new BufferedReader(isr);
String temp;
String tempResponse = "";
while ((temp = br.readLine()) != null)
tempResponse = tempResponse + temp;
responseXML = tempResponse;
br.close();
isr.close();
} catch (java.net.MalformedURLException e) {
System.out
.println("Error in postRequest(): Secure Service Required");
} catch (Exception e) {
System.out.println("Error in postRequest(): " + e.getMessage());
return responseXML;
public String replaceVal(String value) {
if (value == null) {
value = "";
value = value.replace("<", "<");
value = value.replace(">", ">");
value = value.replace("&", "&");
return value;
public static void main(String[] args) {
DocumentSummarizerClient testdoc=new DocumentSummarizerClient();
System.out.println("hello");
testdoc.getSummary("C:\\working_folder\\vep\\UnitTestCases\\VEP1.0\\DocumentSummarizerTestData\\TestErrorFour.doc","100%");
Note: Use any doc with special char(ex: &, $, <, >,.....) TestErrorFour.doc
File 2:
---------public class Base64Utils {
private static byte[] mBase64EncMap, mBase64DecMap;
* Class initializer. Initializes the Base64 alphabet (specified in RFC-2045).
static {
byte[] base64Map = {
(byte)'A', (byte)'B', (byte)'C', (byte)'D', (byte)'E', (byte)'F',
(byte)'G', (byte)'H', (byte)'I', (byte)'J', (byte)'K', (byte)'L',
(byte)'M', (byte)'N', (byte)'O', (byte)'P', (byte)'Q', (byte)'R',
(byte)'S', (byte)'T', (byte)'U', (byte)'V', (byte)'W', (byte)'X',
(byte)'Y', (byte)'Z',
(byte)'a', (byte)'b', (byte)'c', (byte)'d', (byte)'e', (byte)'f',
(byte)'g', (byte)'h', (byte)'i', (byte)'j', (byte)'k', (byte)'l',
(byte)'m', (byte)'n', (byte)'o', (byte)'p', (byte)'q', (byte)'r',
(byte)'s', (byte)'t', (byte)'u', (byte)'v', (byte)'w', (byte)'x',
(byte)'y', (byte)'z',
(byte)'0', (byte)'1', (byte)'2', (byte)'3', (byte)'4', (byte)'5',
(byte)'6', (byte)'7', (byte)'8', (byte)'9', (byte)'+', (byte)'/'};
mBase64EncMap = base64Map;
mBase64DecMap = new byte[128];
for (int i=0; i<mBase64EncMap.length; i++)
mBase64DecMap[mBase64EncMap[i]] = (byte) i;
* This class isn't meant to be instantiated.
private Base64Utils() {
* Encodes the given byte[] using the Base64-encoding,
* as specified in RFC-2045 (Section 6.8).
* @param aData the data to be encoded
* @return the Base64-encoded <var>aData</var>
* @exception IllegalArgumentException if NULL or empty array is passed
public static String base64Encode(byte[] aData) {
if ((aData == null) || (aData.length == 0))
throw new IllegalArgumentException("Can not encode NULL or empty byte array.");
byte encodedBuf[] = new byte[((aData.length+2)/3)*4];
// 3-byte to 4-byte conversion
int srcIndex, destIndex;
for (srcIndex=0, destIndex=0; srcIndex < aData.length-2; srcIndex += 3) {
encodedBuf[destIndex++] = mBase64EncMap[(aData[srcIndex] >>> 2) & 077];
encodedBuf[destIndex++] = mBase64EncMap[(aData[srcIndex+1] >>> 4) & 017 |
(aData[srcIndex] << 4) & 077];
encodedBuf[destIndex++] = mBase64EncMap[(aData[srcIndex+2] >>> 6) & 003 |
(aData[srcIndex+1] << 2) & 077];
encodedBuf[destIndex++] = mBase64EncMap[aData[srcIndex+2] & 077];
// Convert the last 1 or 2 bytes
if (srcIndex < aData.length) {
encodedBuf[destIndex++] = mBase64EncMap[(aData[srcIndex] >>> 2) & 077];
if (srcIndex < aData.length-1) {
encodedBuf[destIndex++] = mBase64EncMap[(aData[srcIndex+1] >>> 4) & 017 |
(aData[srcIndex] << 4) & 077];
encodedBuf[destIndex++] = mBase64EncMap[(aData[srcIndex+1] << 2) & 077];
else {
encodedBuf[destIndex++] = mBase64EncMap[(aData[srcIndex] << 4) & 077];
// Add padding to the end of encoded data
while (destIndex < encodedBuf.length) {
encodedBuf[destIndex] = (byte) '=';
destIndex++;
String result = new String(encodedBuf);
return result;
* Decodes the given Base64-encoded data,
* as specified in RFC-2045 (Section 6.8).
* @param aData the Base64-encoded aData.
* @return the decoded <var>aData</var>.
* @exception IllegalArgumentException if NULL or empty data is passed
public static byte[] base64Decode(String aData) {
if ((aData == null) || (aData.length() == 0))
throw new IllegalArgumentException("Can not decode NULL or empty string.");
byte[] data = aData.getBytes();
// Skip padding from the end of encoded data
int tail = data.length;
while (data[tail-1] == '=')
tail--;
byte decodedBuf[] = new byte[tail - data.length/4];
// ASCII-printable to 0-63 conversion
for (int i = 0; i < data.length; i++)
data[i] = mBase64DecMap[data[i]];
// 4-byte to 3-byte conversion
int srcIndex, destIndex;
for (srcIndex = 0, destIndex=0; destIndex < decodedBuf.length-2;
srcIndex += 4, destIndex += 3) {
decodedBuf[destIndex] = (byte) ( ((data[srcIndex] << 2) & 255) |
((data[srcIndex+1] >>> 4) & 003) );
decodedBuf[destIndex+1] = (byte) ( ((data[srcIndex+1] << 4) & 255) |
((data[srcIndex+2] >>> 2) & 017) );
decodedBuf[destIndex+2] = (byte) ( ((data[srcIndex+2] << 6) & 255) |
(data[srcIndex+3] & 077) );
// Handle last 1 or 2 bytes
if (destIndex < decodedBuf.length)
decodedBuf[destIndex] = (byte) ( ((data[srcIndex] << 2) & 255) |
((data[srcIndex+1] >>> 4) & 003) );
if (++destIndex < decodedBuf.length)
decodedBuf[destIndex] = (byte) ( ((data[srcIndex+1] << 4) & 255) |
((data[srcIndex+2] >>> 2) & 017) );
return decodedBuf;
issue 2: Exception when passing 2MB .txt file
Steps to reproduce:
Call getSummary() with 2MB .txt file
Actual:
The following exception has occured:
1. Error in postRequest(): Unexpected end of file from server
java.lang.NullPointerException
Please provide your precious feedback/suggestions.
Thanks in advance…..
Edited by: EJP on 15/03/2011 16:52: added code tags. Please use them. Code is unreadable otherwise.Thanks for your response….
This is enhancement project and some one develops long back.
Regarding point (b) You should be using the java.net.URLEncoder to encode URL parameters, not a base64 encoder.
DocumentSummarizerClient.java I am using base64
Ex:
// String encoded =new String (summaryInputData.getBytes("ISO-8859-1"),"UTF-8");
String encoded=Base64Utils.base64Encode(summaryInputData.getBytes());
// encoded =new String (summaryInputData.getBytes("ISO-8859-1"),"UTF-8");
String parameters= "base64String="+encoded+"&noOfWordsOrPercentage="+noOfWordsOrPercentage;
summarizedData= postRequest(parameters,summarizerURL);
String slength= "<string xmlns=\"http://tempuri.org/\">";
if(summarizedData.contains("</string>")){
summarizedData= summarizedData.substring(summarizedData.indexOf(slength)+slength.length(),summarizedData.indexOf("</string>"));
summarizedData = replaceVal(summarizedData);
//System.out.println("<?xml version=\"1.0\" encoding=\"utf-8\"?><![CDATA["+summarizedData+"]]>");
System.out.println("Summarized data "+summarizedData);
if(summarizedData.contains("Please enter the percentage")){
summarizedData="Data given cannot be summarized further";
Above specific please I need to modify to resolve above issue.
Could you please suggest me what changes I need to do.
Waiting for positive response. -
Hi,
I am doing RFC to File. I could generate the FILE successfully. But I am not getting Response from RFC. I am getting empty payload. I am doing with out BPM. I did succesfully File-RFC-File. but here RFC is the sender. I have some doubts in defining Interface mapping and Message Mapping. Is this a Syscronous scenario by default ?
If I want to get the resonse of RFC to a file. How many Receivers and Senders do i need to create?
Regards,
Varun
Edited by: Varun on Sep 9, 2008 1:00 PMhi,
Map Rfc.response to the File; hence rfc sender adapter and file receiver adapter..one sender n 1 receiver.Remember:
1. In the report that makes the call to XI , make sure that you use call RFC in a background task.
2. Make sure you use Commit Work at the end of the report.
Follow:
Send RFC to SAP XI Asynchronous
Also pls visit
Re: RFC to FILE
for the same scenario.
Thanks,
Durga
Edited by: NagaDurga Nannapaneni on Sep 9, 2008 10:55 AM -
Could not get response for challenge?
I could succefully use podcast capture to post video to groupblog.
But when I used command line "pcastaction groupblog", it always said that
"ERROR: could not get response for challenge"
But "pcast_post2groupblog" works well for me. I wonder why this happened?
P.S:
I've updated my server to the latest version.If you look at the workflow, there is probably something in there like this:
<string>--otp=##Groups Administrator Username:Groups Administrator Password##</string>
That's a one time pad. I ran into this when troubleshooting our iTunes U workflow from the command line. To get my iTunes U stuff to work from the command line I had to generate a OTP each time, like so:
$sudo pcastconfig --add_access "token" --properties "iTunes U Shared Secret"
Except yours will be different because it's for group blog.... if indeed this is your problem. I only guessed this looking at the stock blog workflow, it uses an OTP.
Hope that was helpful and not way off the mark. -
Using NULL and NOT NULL in prompted filters
Dear all,
While trying to grap the concept of prompted filters in sap bo web intelligence, I had a question whether why we cannot use NULL and NOT NULL while creating a prompted filters in our report.HI,
'Is Null' and 'Not Null' are the predefined functions in webi which only eliminate the null values or considering only null values.
'Is Null' and 'Not Null' are itself predefined functions that why you are not getting prompts.
Null values are standard across the databases so this is defined as a function in webi to specific eliminate the null values.
If something is not standard then there is option in the webi to use different operator with static values or with prompts.
More more information on Null see the Null wiki page.
Null (SQL) - Wikipedia, the free encyclopedia
Amit -
Is it possible to download iOS 5 from one iMac on two ipads and not get them totally wiped of apps and stuff. We have an iPad each and a communal email address and an iCloud address each. One iPad now is totally screwed up.
Thank you for your reply.
I am somewhat new to iOS and OS having grown up with DOS and Windows. I am not familiar with IMAP and iCloud and I am not even sure which types of servers my various emails use.
The problem I would anticipate with iCloud is that (I assume) it would limit my access to data (including mail) on the iCloud to when I happen to be logged onto the internet. I also assume(?) that large files (photos etc.) would require some time to download whenever I wish to access them from whichever device I happen to be using (I hope I am wrong about this).
I have kept my devices to 500gb - 1TB for OS and 32gb - 128gb for iOS but since I have pretty slow WiFi (shared with DirecTV Whole Home and Netflix streaming) it is my impression that iCloud might be quite limited due to data transfer times.
Perhaps a factor would be that I have 2 DSL lines and my main DSL line is connected to two wireless routers (to also provide WiFi in a metal building that blocks WiFi and Cellular signals)
I may be totally wrong in my assumptions regarding iCloud. My mail is not so urgent that I need access to it instantly and I could wait until I had internet access or I can get it on my iPhone. My main concern with iCloud would be my data files (Word, Pages, Excel, Numbers etc.).
On the other hand, if I wanted to keep my 10,000 emails that would take up a lot of iCloud memory and I don't know how to measure how much storage it would take or how to move Hotmail or even iCloud mail to iCloud.
It may take me some time to figure this out. -
Is there a way to stop the OS from switching to a newly opened app? I would like to be able to continue what I'm doing while I wait for an app to launch and not get interrupted by a forced entry into the app.
As an example, I'm going to my email in safari, while I wait for it to load, I open an excel document, and the OS decides excel should be the front app, so I go back to safari so I can enter my login info, but halfway through my password the OS decides that excel is where I should finish typing my password.
VERY ANNOYING. Can I open apps in the background?Thank you everyone for the suggestions. J D, I'm not a terminal fan, but I'm sure it works. I found a solution that I can use in the dock from another post.
Annoyed by Mac OS
Works great and allows me to maximize those multitasking minutes. -
Dear Apple. I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7 bootcamp install download from Apple
It is a Total Misconception that the Support files are installed when you are installing Windows, even if the USB drive that holds them is inserted in the system when doing the Windows install.
You must always Run the Setup.exe files from the support files or run the drivers individually once Windows has finished installing and booted to the desktop.
Also you really need to run the Boot Camp Control Panel Applet and check for updates as not all the newest drivers for full function of all the hardware is included with the original support download. That download is basically a generic version to get the system working and without doing the updates not everything will work properly.
Maybe you are looking for
-
Please help me with my problem
-
Custom Fields in the PO SRM-7.0
Hi Experts: I Write for the following thema I have added two fields in the view 'V_PO_DODC_HD_GN_BD' component '/ SAPSRM/WDC_DODC_PO_H_BD1', which through configuration only appear in the types of purch-orders ZBES or ZIPO, these fields make it throu
-
Hello, I have a table with 3 informations : CompanyName (dimension) Employee (dimension) Salary (indicator) I have a break on the CompanyName. Break definition : Break Footer - Remove Duplicates- Fold I have choosen the option "Fold" because, at the
-
when I Clicked to update iTunes, appear this message: An error occurred while installing the updates.(103)
-
When syncing my iPad Mini I notice "other" in the status bar. It is taking over 4gb of space. What is "Other" and how do I get rid of it.