Not getting Response from RFC

Hi,
I am doing RFC to File. I could generate the FILE successfully. But I am not getting Response from RFC. I am getting empty payload. I am doing with out BPM. I did succesfully File-RFC-File. but here RFC is the sender. I have some doubts in defining Interface mapping and Message Mapping. Is this a Syscronous scenario by default ?
If I want to get the resonse of RFC to a file. How many Receivers and Senders do i need to create?
Regards,
Varun
Edited by: Varun on Sep 9, 2008 1:00 PM

hi,
Map Rfc.response to the File; hence rfc sender adapter and file receiver adapter..one sender n 1 receiver.Remember:
1. In the report that makes the call to XI , make sure that you use call RFC in a background task.
2. Make sure you use Commit Work at the end of the report.
Follow:
Send RFC to SAP XI Asynchronous
Also pls visit
Re: RFC to FILE
for the same scenario.
Thanks,
Durga
Edited by: NagaDurga Nannapaneni on Sep 9, 2008 10:55 AM

Similar Messages

One socket and two ports, not getting response from the server

Hi everyone,
I am working on device which communicate through Tcp sockets, It has an IP address and one port for listening and another for sending the response.
Problem is that I am able to create a connection to Device ip+port, and i am trying to listen on the same port while the device is sending the response on other port. My problem is that i can't create another socket using this port and therefore not getting the response from the device.
Can you people tell me how to handle such socket communication in java ?
Thanks in advance.

I am working on device which communicate through Tcp sockets, It has an IP address and one port for listening and another for sending the response.Are you sure? That's not usual. It would be usual for it to use the same port for listening, reading, and writing.
Problem is that I am able to create a connection to Device ip+port, and i am trying to listen on the same port while the device is sending the response on other port.I would try just reading from the same socket you are sending on. I suggest you have misunderstood how the device works.

Socket Programming-Not getting response from server.

Hi,
I am trying to communicate with server using java socket programming, I am getting the response for first two times third time when I am trying to write some thing I am not getting any response from the server,
I am writing to migrate the vb code to Java the vb is using a c++ dll to communicate with the server and we tried accessing the dll from java using JNI then it is working fine, this dll is dependent on windows so we want to avoid the dependency with windows that is why we are going for socket programming, Please help on this.

Hi,
I am writing the data in forms of string
like
Socket sockt = new Socket(ipAddress, portNo);
out= new DataOutputStream(sockt.getOutputStream());
in = new DataInputStream(sockt.getInputStream());
out.writeBytes("Serv");
out.writeBytes("Serv,32");
out.writeBytes("home,serv32,run.prg,sucess");
these are the strings to communicate with server.
I am trying to read the same
StringBuffer buf = new StringBuffer();
          byte b = '\0';
                    try {
               while ((b = in.readByte()) != '\0')
                    char ch = (char) b;
                    buf.append(ch);
          } catch (Exception e) {
               System.out.println(e.getStackTrace());
we are getting the response for the first two strings, but for the third string it is getting stucked for some time and returing some junk values like '???' we are sending the same string using JNI and it is working.

Not getting response from Client Proxy

Hi,
We are developing a scenario - File->PI->Proxy using ABAP Proxies.We are posting a file thru PI 7.0 to R/3 .In R/3 the server proxy(Inbound Asynchronous) will receive the message and BAPI will be called. The response from the BAPI will be reaching the server proxy and passed to the client proxy(Outbound Asynchronous).
Server Proxy(request) --> BAPI --> Server Proxy(response) --> Client Proxy(response)
The response from the client proxy has to be send to PI and a file will be generated as the output.
Can anyone provide me suggestions to call client proxy from a server proxy by passing the response message to client proxy???
Thanks in advance.
Regards,
Dibyajyoti

Hi,
I hope, you are done till the Implementation of Server Proxy, where you are calling a Bapi and passing the Input variables the Interface received and BAPI is giving a response back.
Now your question, how to send the response back Asynchronously.
I think, you have to do the same, what you do for a client proxy and at last call the method EXECUTE_ASYNCHRONOUS before the Final Commit Staement. I think this should work.
But using Synchronous Interface in such cases is always a handy and easier option.
Regards,
Subhendu

RFC problem: could not get functionname from XML requst (sic)

I'm developing an interface that attempts to call a receiver RFC on an SAP 4.6c system. It's a very small simple interface, and it's all working until it tries to call the RFC. The error is
Exception caught by adapter framework: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declara
I've created an RFC channel, which is green in the adapter monitoring. The RFC imports without a problem, and appears in my interface mapping. My mapping program converts to the RFC message type (as evidenced in sxmb_moni. I have a receiver agreement referencing the interface mapping, which must be working as the mapping is called.
Could anyone point me to what else I could check? I saw a post about the same error message, where the respondent found something in the logs which helped them Could you expand on what you found, and in which log please? Any pointers as to which logging options I could switch on and check would be gratefully received.
Regards
Alan Graham

Thanks for the responses.
I set up a communications channel of type RFC, which is
showing green in the adapter monitor. If I deliberately
break it, eg by changing the password, the adapter shows
as red in the monitor. I assume therefore that the
adaptor settings are correct.
The XML going to the adapter looks correct AFAIK. My problem is that I don't know enough about the requied XML to know if what I'm seeing in the logs is sufficient. In SXMB_MONI, in the 'call adapter' section of a failed message, the outbound binding includes
<SAP:ToInterfaceNamespace>urn:sap-com:document:sap:rfc:functions</SAP:ToInterfaceNamespace>/code]
Also, the interface determination SOAP header, in the MAIN section includes
[code]<SAP:Receiver>
<SAP:Party agency="" scheme="" />
<SAP:Service>D04</SAP:Service>
<SAP:Interface namespace="urn:sap-com:document:sap:rfc:functions">Z_MPU_3PSCE_FREIGHT_UPLOAD</SAP:Interface>
</SAP:Receiver>
These are the correct values for the RFC name and the namespace, AFAIK.
I'm using an interface mapping (which uses and ABAP class as the mapping program) which references the interface of the RFC. The logs tell me this works, ie, the class is called and the resulting XML appears in the payload of the response.
Alan

Hello my name is leandro from months ago and am trying to connect with my apple id but informs me that it is wrong and I can not buy or upgrade my mac from the official website of apple can go with my ide but can not get response technical support'm from

hello my name is leandro from months ago and am trying to connect with my apple id but informs me that it is wrong and I can not buy or upgrade my mac from the official website of apple can go with my ide but can not get response technical support'm from Argentina someone could help me

Apple ID security issues -
Call Apple Care and ask for the Account Security Team. They can assist you with your issue.

Issue: Not getting response when the document is having special chars

Please help following issue: Not getting response when the document is having special chars(Use any doc with special char(ex: &, $, <, >,.....) TestErrorFour.doc
Error message:
System.FormatException: Invalid length for a Base-64 char array. at
System.Convert.FromBase64String(String s) at
Summarize.Summarizer.AccumulateBroadcast(String filedata, String givenWords) in
c:\DocumentSummarizer\App_Code\Summarizer.cs:line 66
Code:
File 1:
import java.io.BufferedReader;
import java.io.FileInputStream;
import java.io.FileNotFoundException;
import java.io.FileReader;
import java.io.IOException;
import java.io.InputStreamReader;
import java.io.OutputStream;
import java.net.HttpURLConnection;
import java.net.URL;
import java.net.URLConnection;
import java.util.Properties;
import org.apache.poi.poifs.filesystem.POIFSFileSystem;
import org.apache.poi.hwpf.*;
import org.apache.poi.hwpf.extractor.*;
import com.lowagie.text.Document;
import com.lowagie.text.pdf.PRTokeniser;
import com.lowagie.text.pdf.PdfReader;
public class DocumentSummarizerClient {
     static Properties loadProperties() {
          Properties prop = new Properties();
          try {
               prop.load(DocumentSummarizerClient.class.getClassLoader().getResourceAsStream("vep.properties"));
          } catch (Exception ioe) {
               ioe.printStackTrace();
          return prop;
     public String getSummary(String fileName,String noOfWordsOrPercentage ){
          String summaryInputData ="";
          String summarizedData="";
          String summarizerURL = loadProperties().getProperty("Summarizer.serviceURL");
          try {
               String fileExtension=fileName.substring(fileName.lastIndexOf(".")+1, fileName.length());
               if (fileExtension.equalsIgnoreCase("doc")|| fileExtension.equalsIgnoreCase("txt")|| fileExtension.equalsIgnoreCase("pdf")) {
                              if (fileExtension.equalsIgnoreCase("txt")) {
                                   BufferedReader bufferedReader = new BufferedReader(
                                             new FileReader(fileName));
                                   String line = null;
                                   while ((line = bufferedReader.readLine()) != null) {
                                        summaryInputData += line;
                              if(fileExtension.equalsIgnoreCase("doc")){
                                   POIFSFileSystem fs = null;
                                    fs = new POIFSFileSystem(new FileInputStream(fileName));
                                     HWPFDocument doc = new HWPFDocument(fs);
                                     WordExtractor we = new WordExtractor(doc);
                                     String[] paragraphs = we.getParagraphText();
                                     for( int i=0; i<paragraphs .length; i++ ) {
                                        paragraphs[i] = paragraphs.replaceAll("\\cM?\r?\n","");
                              summaryInputData+= paragraphs[i];
                              if(fileExtension.equalsIgnoreCase("pdf")){
                                   Document document = new Document();
               document.open();
               PdfReader reader = new PdfReader(fileName);
               int pageCount =reader.getNumberOfPages();
                    for(int i=1;i<=pageCount;i++){
                              byte[] bytes = reader.getPageContent(i);
                              PRTokeniser tokenizer = new PRTokeniser(bytes);
                              StringBuffer buffer = new StringBuffer();
                              while (tokenizer.nextToken()) {
                              if (tokenizer.getTokenType() == PRTokeniser.TK_STRING) {
                              buffer.append(tokenizer.getStringValue());
                              summaryInputData += buffer.toString();
               else{
                    System.out.println("This is Invalid document. Presntly we support only text,word and PDF documents ");
               // String encoded =new String (summaryInputData.getBytes("ISO-8859-1"),"UTF-8");
                    String encoded=Base64Utils.base64Encode(summaryInputData.getBytes());
               // encoded =new String (summaryInputData.getBytes("ISO-8859-1"),"UTF-8");
                    String parameters= "base64String="+encoded+"&noOfWordsOrPercentage="+noOfWordsOrPercentage;
                    summarizedData= postRequest(parameters,summarizerURL);
                    String slength= "<string xmlns=\"http://tempuri.org/\">";
                    if(summarizedData.contains("</string>")){
                    summarizedData= summarizedData.substring(summarizedData.indexOf(slength)+slength.length(),summarizedData.indexOf("</string>"));
                    summarizedData = replaceVal(summarizedData);
                    //System.out.println("<?xml version=\"1.0\" encoding=\"utf-8\"?><![CDATA["+summarizedData+"]]>");
                    // System.out.println("Summarized data "+summarizedData);
                    if(summarizedData.contains("Please enter the percentage")){
                         summarizedData="Data given cannot be summarized further";
               else{
                    System.out.println("Data given cannot be summarized further");
                    summarizedData="";
          } catch (FileNotFoundException e) {
               return("The File is not found \n\n"+e.toString());
          } catch (IOException e) {
               return("The File is already in use \n\n"+e.toString());
          } catch (Exception e) {
               return(e.toString());
          return summarizedData;
     public static String postRequest(String parameters,String webServiceURL) throws Exception{
          Properties systemSettings = System.getProperties();
          systemSettings.put("http.proxyHost", loadProperties().getProperty("proxyHost"));
     systemSettings.put("http.proxyPort", loadProperties().getProperty("proxyPort"));
     System.setProperties(systemSettings);
          String responseXML = "";
          try {
               URL url = new URL(webServiceURL);
               URLConnection connection = url.openConnection();
               HttpURLConnection httpConn = (HttpURLConnection) connection;
               byte[] requestXML = parameters.getBytes();
               httpConn.setRequestProperty("Content-Length", String
                         .valueOf(requestXML.length));
               httpConn.setRequestProperty("Content-Type",
                         "application/x-www-form-urlencoded");
               httpConn.setRequestMethod("POST");
               httpConn.setDoOutput(true);
               httpConn.setDoInput(true);
               OutputStream out = httpConn.getOutputStream();
               out.write(requestXML, 0, requestXML.length);
               out.close();
               InputStreamReader isr = new InputStreamReader(httpConn
                         .getInputStream());
               BufferedReader br = new BufferedReader(isr);
               String temp;
               String tempResponse = "";
               while ((temp = br.readLine()) != null)
                    tempResponse = tempResponse + temp;
               responseXML = tempResponse;
               br.close();
               isr.close();
          } catch (java.net.MalformedURLException e) {
               System.out
                         .println("Error in postRequest(): Secure Service Required");
          } catch (Exception e) {
               System.out.println("Error in postRequest(): " + e.getMessage());
          return responseXML;
     public String replaceVal(String value) {
               if (value == null) {
                    value = "";
               value = value.replace("<", "<");
               value = value.replace(">", ">");
               value = value.replace("&", "&");
               return value;
          public static void main(String[] args) {
               DocumentSummarizerClient testdoc=new DocumentSummarizerClient();
               System.out.println("hello");
               testdoc.getSummary("C:\\working_folder\\vep\\UnitTestCases\\VEP1.0\\DocumentSummarizerTestData\\TestErrorFour.doc","100%");
Note: Use any doc with special char(ex: &, $, <, >,.....) TestErrorFour.doc
File 2:
---------public class Base64Utils {
private static byte[] mBase64EncMap, mBase64DecMap;
* Class initializer. Initializes the Base64 alphabet (specified in RFC-2045).
static {
byte[] base64Map = {
(byte)'A', (byte)'B', (byte)'C', (byte)'D', (byte)'E', (byte)'F',
(byte)'G', (byte)'H', (byte)'I', (byte)'J', (byte)'K', (byte)'L',
(byte)'M', (byte)'N', (byte)'O', (byte)'P', (byte)'Q', (byte)'R',
(byte)'S', (byte)'T', (byte)'U', (byte)'V', (byte)'W', (byte)'X',
(byte)'Y', (byte)'Z',
(byte)'a', (byte)'b', (byte)'c', (byte)'d', (byte)'e', (byte)'f',
(byte)'g', (byte)'h', (byte)'i', (byte)'j', (byte)'k', (byte)'l',
(byte)'m', (byte)'n', (byte)'o', (byte)'p', (byte)'q', (byte)'r',
(byte)'s', (byte)'t', (byte)'u', (byte)'v', (byte)'w', (byte)'x',
(byte)'y', (byte)'z',
(byte)'0', (byte)'1', (byte)'2', (byte)'3', (byte)'4', (byte)'5',
(byte)'6', (byte)'7', (byte)'8', (byte)'9', (byte)'+', (byte)'/'};
mBase64EncMap = base64Map;
mBase64DecMap = new byte[128];
for (int i=0; i<mBase64EncMap.length; i++)
mBase64DecMap[mBase64EncMap[i]] = (byte) i;
* This class isn't meant to be instantiated.
private Base64Utils() {
* Encodes the given byte[] using the Base64-encoding,
* as specified in RFC-2045 (Section 6.8).
* @param aData the data to be encoded
* @return the Base64-encoded <var>aData</var>
* @exception IllegalArgumentException if NULL or empty array is passed
public static String base64Encode(byte[] aData) {
if ((aData == null) || (aData.length == 0))
throw new IllegalArgumentException("Can not encode NULL or empty byte array.");
byte encodedBuf[] = new byte[((aData.length+2)/3)*4];
// 3-byte to 4-byte conversion
int srcIndex, destIndex;
for (srcIndex=0, destIndex=0; srcIndex < aData.length-2; srcIndex += 3) {
encodedBuf[destIndex++] = mBase64EncMap[(aData[srcIndex] >>> 2) & 077];
encodedBuf[destIndex++] = mBase64EncMap[(aData[srcIndex+1] >>> 4) & 017 |
(aData[srcIndex] << 4) & 077];
encodedBuf[destIndex++] = mBase64EncMap[(aData[srcIndex+2] >>> 6) & 003 |
(aData[srcIndex+1] << 2) & 077];
encodedBuf[destIndex++] = mBase64EncMap[aData[srcIndex+2] & 077];
// Convert the last 1 or 2 bytes
if (srcIndex < aData.length) {
encodedBuf[destIndex++] = mBase64EncMap[(aData[srcIndex] >>> 2) & 077];
if (srcIndex < aData.length-1) {
encodedBuf[destIndex++] = mBase64EncMap[(aData[srcIndex+1] >>> 4) & 017 |
(aData[srcIndex] << 4) & 077];
encodedBuf[destIndex++] = mBase64EncMap[(aData[srcIndex+1] << 2) & 077];
else {
encodedBuf[destIndex++] = mBase64EncMap[(aData[srcIndex] << 4) & 077];
// Add padding to the end of encoded data
while (destIndex < encodedBuf.length) {
encodedBuf[destIndex] = (byte) '=';
destIndex++;
String result = new String(encodedBuf);
return result;
* Decodes the given Base64-encoded data,
* as specified in RFC-2045 (Section 6.8).
* @param aData the Base64-encoded aData.
* @return the decoded <var>aData</var>.
* @exception IllegalArgumentException if NULL or empty data is passed
public static byte[] base64Decode(String aData) {
if ((aData == null) || (aData.length() == 0))
throw new IllegalArgumentException("Can not decode NULL or empty string.");
byte[] data = aData.getBytes();
// Skip padding from the end of encoded data
int tail = data.length;
while (data[tail-1] == '=')
tail--;
byte decodedBuf[] = new byte[tail - data.length/4];
// ASCII-printable to 0-63 conversion
for (int i = 0; i < data.length; i++)
data[i] = mBase64DecMap[data[i]];
// 4-byte to 3-byte conversion
int srcIndex, destIndex;
for (srcIndex = 0, destIndex=0; destIndex < decodedBuf.length-2;
srcIndex += 4, destIndex += 3) {
decodedBuf[destIndex] = (byte) ( ((data[srcIndex] << 2) & 255) |
((data[srcIndex+1] >>> 4) & 003) );
decodedBuf[destIndex+1] = (byte) ( ((data[srcIndex+1] << 4) & 255) |
((data[srcIndex+2] >>> 2) & 017) );
decodedBuf[destIndex+2] = (byte) ( ((data[srcIndex+2] << 6) & 255) |
(data[srcIndex+3] & 077) );
// Handle last 1 or 2 bytes
if (destIndex < decodedBuf.length)
decodedBuf[destIndex] = (byte) ( ((data[srcIndex] << 2) & 255) |
((data[srcIndex+1] >>> 4) & 003) );
if (++destIndex < decodedBuf.length)
decodedBuf[destIndex] = (byte) ( ((data[srcIndex+1] << 4) & 255) |
((data[srcIndex+2] >>> 2) & 017) );
return decodedBuf;
issue 2: Exception when passing 2MB .txt file
Steps to reproduce:
Call getSummary() with 2MB .txt file
Actual:
The following exception has occured:
1. Error in postRequest(): Unexpected end of file from server
java.lang.NullPointerException
Please provide your precious feedback/suggestions.
Thanks in advance…..
Edited by: EJP on 15/03/2011 16:52: added code tags. Please use them. Code is unreadable otherwise.

Thanks for your response….
This is enhancement project and some one develops long back.
Regarding point (b) You should be using the java.net.URLEncoder to encode URL parameters, not a base64 encoder.
DocumentSummarizerClient.java I am using base64
Ex:
// String encoded =new String (summaryInputData.getBytes("ISO-8859-1"),"UTF-8");
                    String encoded=Base64Utils.base64Encode(summaryInputData.getBytes());
               // encoded =new String (summaryInputData.getBytes("ISO-8859-1"),"UTF-8");
                    String parameters= "base64String="+encoded+"&noOfWordsOrPercentage="+noOfWordsOrPercentage;
                    summarizedData= postRequest(parameters,summarizerURL);
                    String slength= "<string xmlns=\"http://tempuri.org/\">";
                    if(summarizedData.contains("</string>")){
                    summarizedData= summarizedData.substring(summarizedData.indexOf(slength)+slength.length(),summarizedData.indexOf("</string>"));
                    summarizedData = replaceVal(summarizedData);
                    //System.out.println("<?xml version=\"1.0\" encoding=\"utf-8\"?><![CDATA["+summarizedData+"]]>");
                    System.out.println("Summarized data "+summarizedData);
                    if(summarizedData.contains("Please enter the percentage")){
                         summarizedData="Data given cannot be summarized further";
Above specific please I need to modify to resolve above issue.
Could you please suggest me what changes I need to do.
Waiting for positive response.

How to get response from an asynchronous BPEL process in Java

I'm experimenting with BPEL and doesn't seem to be able to get response from an asynchronous BPEL process. Here's the deal:
I have a BPEL process that takes a string as input, and gives another string as output. This is a asyncronous process.
I want to initiate this BPEL process as a web service so I generate a Webservice Proxy in JDeveloper 10g (10.1.3.0.4). The function to call the process is now called "initiate" and takes three arguments: the input string, a "org.xmlsoap.schemas.ws._2003._03.addressing.EndpointReferenceType replyTo" and a
"org.xmlsoap.schemas.ws._2003._03.addressing.AttributedURI messageID".
HTTP-Analyzer shows that invoking the BPEL process with initiate("somestring", null, null) results in sending a SOAP message to the BPEL process, which returns a "202 Accepted". How do I get the response from the process? My intuition tells me that I have to use that second argument, that EnpointReferenceType thing. How do I use that?
Another question: If a asynchronous BPEL process does not exists (so the endpoint does not exist) the Java proxy does not throw an error when runned. It does not even sends a message. It exits with status 0! (This happens for example when deploying a new version of a process and when the "old" version is undeployed). Calling a non-existing synchronous BPEL process, the Java proxy DOES throw an error.

Clemens,
That all sounds logical. But somehow it is still a mystery for me ... Somehow I don't see what should be done.
To call the async BPEL process I have the following procedure:
initiate(String input, org.xmlsoap.schemas.ws._2003._03.addressing.EndpointReferenceType replyTo, org.xmlsoap.schemas.ws._2003._03.addressing.AttributedURI messageID)
The first argument is the input for my BPEL process. The second is the address to a webservice that should handle the callback, right? The third is a messageID (makes sense, but why of the type AttributedURI?).
Here lies my problem. It is not clear to me how these EndpointReferenceType & AttributedURI work. I can't find anything on the net about it. The AXIS examples as where mentioned earlier use other types (namely the "org.xmlsoap.schemas.ws.addressing.MessageID" and "org.xmlsoap.schemas.ws.addressing.ReplyTo") which are completely different.
What I did so far:
- I created an webservice proxy that listens on the onResult endpoint of the BPEL process.
- I created an webservice proxy that calls the BPEL process through the initiate procedure, but it is not completely clear to me how to construct the EndPointreferenceType replyTo, and the MessageID. I did something like this:
EndpointReferenceType replyTo = new EndpointReferenceType();
// callback service running on local machine
// This URI class is the java.net's version
URI replyToURI = new URI("http://vaccinatie:8988/syncro-callback-context-root/stringconcatCallbackBindingPort");
// This AttributedURI is the org.xmlsoap.schemas.ws._2003._03.addressing's version
AttributedURI address = new AttributedURI();
// the only public methos that made sense to me:
address.set_value(replyToURI);
replyTo.setAddress(address);
// call the BPEL process
myPort.initiate("test123", replyTo, address);
But the above doesn't work (largely because I don't know what I'm doing here prob.:-) ) It does send the "test123" message, and the BPEL process does process it, but I don't seem to get the callback right.
I hope this makes my problems somewhat clearer. I hope someone can help me, because I'm just a beginner in this whole "web service area" and seems to do something terribly wrong here, because it should be very simple. Thx.

Purchase Req & Standard PO - Price is not getting Defaulted from Price List

Dear All,
Hope you are doing good!!!
We are implementing R12.1 for one of our client. This query is pertaining to the Advance Pricing with Purchasing. Infact client wants to default the Purchase Requisition and Standard Purchase Order Price from Price List.
I have done entire setup and defined ASL for this reason. But still price is not getting defulted from Contract Purchase Ageerement.
What could be the reason. Its an standard fucntionality but still its not picking up.
I would really appreciate if someone could help me on this. Its URGENT.
Thanks in Advance.
Thanks & Regards,
Aditya

Let us go through the steps involved in integrating Advanced Pricing with Purchasing so that we know if we have missed anything.
1. Create Price Lists in Advanced Pricing.
2. Setup Profile Options in System Administrator responsibility:
QP: Licensed for Product - at Application: Purchasing level = Purchasing.
QP: Pricing Transaction Entity - at Application: Purchasing level = Procurement
( Site level - ‘Order Fulfillment’ )
Profile option can be set at site, application, and user levels.
QP: Source System Code – at Application: Purchasing level = Oracle Purchasing
( Site level -- ‘Oracle Pricing’ )
Profile can be set at site and responsibility levels.
QP: Item Validation Organization - at Application: Purchasing level = null
( Site level -- specified in Financial Options )
Profile option can be set at site and responsibility levels.
3. Add item to the Price list Advanced Pricing ->Price Lists -> Price List Setup.
Enter the item/price/dates etc.
4. Create Contract Purchase Agreement.
5. Create Approved Suppliers List. In the Source Documents, select the Type as Contract and reference the Contract Agreement Number.
Create the Sourcing Rule and add the Rule to the Assignment Set.
6. Create the Standard Purchase Order referencing the Contract Purchase Agreement in the Reference Documents.
The Price listed should be defaulted from the Price Lists.
Cross-Check the following steps and let me know if it still fails and we can try to resolve from then on :)

Standard PO workflow giving error due to Release coe is not getting passed from event

Hi Team,
I am getting the below error while processing the Standard workflow for PO.
I think its due to the Release code is not getting passed from Event to workflow.
Can you please sugest from where the release code is getting fetched before triggering the event.
Error processing following event linkage:
BUS2012 RELEASESTEPCREATED WS20000075
Following error occurred:
SWF_RUN 594
Message text:
Import container contains errors (are any obligatory elements missing?)
Event container appended as attachment.
Event linkage not changed.
Event stored temporarily.
Events can be redelivered via event queue
administration (transaction SWEQADM)

Hi
Please check threads, response by Fernando Carames, ( Jul 19, 2007 2:37 PM): http://scn.sap.com/thread/483005
Or by Trevor Ticehurst on Oct 9, 2008 3:39 PM at: http://scn.sap.com/thread/1080411
OR
http://www.sapfans.com/forums/viewtopic.php?f=26&t=297786
All these mention certian notes which may be helpful.
However, it is important to first ensure that the release startegy is configured and working properly (check with your MM con)
regards,
Modak

Profile Imanges are not getting deleted from Profile Image library

Hi,
If I go mysite and edit my profile and set a profile images and save the changes. Image is uploaded to profile Image library in the root of the mysite.
I Edit my profile again and this time I remove the profile image and save the changes. Image is not getting deleted from the profile Image library.
as per my understanding it should get deleted. My site clean job is running. user profile is active in AD.
Thanks
Omkar

My first question would be is it a big deal if the picture doesnt get deleted from the libarary? My understanding is that the profile picture field is a URL link, the first time you add a picture it will provision 3 copies of differing sizes to the
library. When you "remove" the picture, it just empties out the picture URL field. Which is a nice hidden recovery if someone accidently deletes a profile photo they really wanted (Or if your company really locks down picutures so you only get
a choice of a couple avatars instead of a personal photo).
Similar issue:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/17bc8538-568f-4fff-8933-458fdba4b701/delete-user-profile-picture-in-sharepoint-2010-when-account-is-deactivated-or-deleted-from-ad?forum=sharepointadminprevious
and response:
Since the user photo library follows certain standards OOB:
http://iedaddy.com/2010/12/sharepoint-2010photo-management-for-social-mysites/
I would say just create a small script that will periodically read the UPS and make sure there are no photos sitting in the library not associated to an account... here's an example of accessing the User Profiles w/ Powershell:http://iedaddy.com/2010/06/sharepoint-2010-updating-user-profile-properties-with-powershell/
You would just modify it to delete image files whose name is not associated to an existing NTName in the UPS.
ieDaddy
Blog: http://iedaddy.com
Twit: @iedaddy

Could not get response for challenge?

I could succefully use podcast capture to post video to groupblog.
But when I used command line "pcastaction groupblog", it always said that
"ERROR: could not get response for challenge"
But "pcast_post2groupblog" works well for me. I wonder why this happened?
P.S:
I've updated my server to the latest version.

If you look at the workflow, there is probably something in there like this:
<string>--otp=##Groups Administrator Username:Groups Administrator Password##</string>
That's a one time pad. I ran into this when troubleshooting our iTunes U workflow from the command line. To get my iTunes U stuff to work from the command line I had to generate a OTP each time, like so:
$sudo pcastconfig --add_access "token" --properties "iTunes U Shared Secret"
Except yours will be different because it's for group blog.... if indeed this is your problem. I only guessed this looking at the stock blog workflow, it uses an OTP.
Hope that was helpful and not way off the mark.

EA2700 not getting IP from modem

Just received this new EA2700 router the other day, have noticed this problem has been reported a few times in other forums.
Went from a WRT54G connected to a DLINK 202 modem, actually they had no problem, I was just upgrading, when swapping out the router, I noticed it took a very long time with many reboots of modem and router to get an IP, which is set for DHCP from Comcast. The old combo would get an IP within a minute of a reboot. So, just to complete my upgrade, I bought a Motorola 6141 modem, had it set with new MAC at Comcast, same problem with router trying to get an IP.
I did find if you reboot the modem by itself, last, while router is up, the router will get an IP within a few minutes. But, if they are both rebooted together or if the router is rebooted by itself, it will not grab an IP. I have not seen a solution for this "known" problem in all the forums I have read, I have seen quite a few people become very frustrated and just give up on their EA2700 or buy something else.....firmware is latest, I've tried MTU at 1365, IPV6 off/on, resetting, running install app, same problem. So unless someone has the real answer for this, I could be one of those swapping this for another model or brand, I'm afraid.

Khan,
The problem of users not getting IP from the DHCP usually happens when 'spanning-tree portfast' is not enabled on access ports. PCs don't wait long enough for DHCP responses and time out.
Can you make sure all the access ports, to which the users are connected to, have spanning tree portfast enabled.
HTH,
Sundar

ATV2 not getting IP from ethernet

I have an ATV2 connected to a Airport Extreme via ethernet.
When I start up the ATV2, it is not getting a local IP via ethernat from the Airport. Rather the 169.254.xxx.xxx
I have tried all the suggestions i've read in the forums relating to 169.254 including, Manually configuring the TCP/IP.
In all cases, on boot the ATV will not grab a local IP; however, If I unplug the ethernet cable for 30 seconds and plug it back in, the local IP gets assigned and everything works fine. ie. Streaming movies, music, netflix etc.
If i restart the ATV once everything is working. Same thing happens.
Does anyone have any ideas as to why this happnes?
Thanks in Advance

Khan,
The problem of users not getting IP from the DHCP usually happens when 'spanning-tree portfast' is not enabled on access ports. PCs don't wait long enough for DHCP responses and time out.
Can you make sure all the access ports, to which the users are connected to, have spanning tree portfast enabled.
HTH,
Sundar

SRW2024 not getting IP from dhcp

Hi,
I'm have installed a SRW2024 switch in my home office. I've connected via hyperterminal and changed the ip address mode to "dhcp client". But i'm not getting an ip address from the dhcp server.
Is there something else I must do or setup on the switch? the DHCP server has been running without problem for some time now, all my other devices can get an ip without problems...
Thanks,
Koen

Khan,
The problem of users not getting IP from the DHCP usually happens when 'spanning-tree portfast' is not enabled on access ports. PCs don't wait long enough for DHCP responses and time out.
Can you make sure all the access ports, to which the users are connected to, have spanning tree portfast enabled.
HTH,
Sundar

Not getting Response from RFC

Similar Messages

Maybe you are looking for