Using complexsection node (smartforms)

I would like to print a table data by using the complexsection node in smart forms. Can you please tell me the procedure to do it.
What I did is ,
1. I create a complex section node under main window.
2. 1 table and 1 work area of required table type are declared.
3. In general attributes of the complexnode I selected table and cliked on the repeat processing check box.
4. Under that complexsection node I declared the text nodes for the required fields.
4. In main program I called the function module by passing one table with data(in exporting).
NOw , if I run the program i am not getting the output. Instead of that it is again come back to the main program.

the Complex Section of Smartform works like a normal table control for design and standard point of view you can have a look at the the smartform <b>ZSF_EXAMPLE_01</b>
which has a complex section under main window.
You can also analyze by writing a code block with hard coded break-point inside the smartform to look at the functionality of the smartform at the present.
hope it helps
Anirban

Similar Messages

Is it better to use Invoke nodes or property nodes to set/get control values?

I have a series of VI's that run in parallel, each to manage different functions- pumping, sensing, a fluid flow model, an experiment generator/runner.
These need to exchange data, which I am currently doing using invoke nodes (that are all in subVIs), using methods "Set control value" and "Get control value". I find that every now and then (perhaps 1% of the time) the data isn't exchanged correctly and therefore the system doesn't work. I can imagine how "set" could go wrong if they happen simultaneously, and can devise ways of preventing this. However, the "Get" method suffers from the same problem. This is a major problem, because I want to leave it running for several hours.
I could in
principle achieve the same thing using property nodes and find myself wondering if this might be more reliable. But I don't want to change over only to find it makes no difference!
Can anyone advise?

You can use some kind of syncronization such as queues, occurances, or notifiers but I think the easiest way would be to create and action engine. This was only one action can execute at a time avoiding a "race condition". Possibly a write action and a read action might help. You also can add queues or notifiers into this concept. hope this helps.
BJD1613
Lead Test Tools Development Engineer
Philips Respironics
Certified LV Architect / Instructor

How to show/hide sliders on a slider control using property nodes?

If I have a slider with multiple sliders on it how do I change which sliders are visible using property nodes? The only property I have found is making the entire control to be visible or not. This is a possible solution to have two different controls, one slider with only one slider and another slider with two sliders overlapped, but not desirable.
I found on a thread in the forum that it is possible but the user did not provide any specifics about which property it was. (http://forums.ni.com/ni/board/message?board.id=170&message.id=181279&query.id=34404#M181279)
I would appreciate an example VI if possible (Preferred version is 8.5 but versios 8.2, 8.0, and 8.6 are available to me).
Thank you in advance for the help,
Aaron

Just make them transparent! Here's a quick draft.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
HideSliders.vi ‏20 KB

How to use Property nodes?

Hi everyone,
I am a beginner of LabVIEW. So I want to know about Property Node in detail. Please Please someone help me know the function of each property node......
Thank You in Advance,
Solved!
Go to Solution.

Achuthaperumal wrote:
I am a beginner of LabVIEW. So I want to know about Property Node in detail.
Property node allows you to programmatically read/write that particular property of associated object. For example, say you have a String Control, and you want to modify its 'Display Style'... for that you need to create and use that particular property node (of the String control).
Check the attached example.
I am not allergic to Kudos, in fact I love Kudos.
Make your LabVIEW experience more CONVENIENT.
Attachments:
Example - Using Property Node [LV 2009].vi ‏11 KB

How can I change the precision of a numeric array indicator using property nodes ?

I want to change the precision of a numeric array indicator programatically using property nodes. I tried to see all the array properties but I couldn't find it. URGENT !!!

If you want to change the precision of an element in an array you must first get the reference to the array element. Then raise the reference to the more specific class of a digital numeric. Use a property node connected to that reference to set the precision. See the attached vi for an example.
Brian
Attachments:
ArrayElementPrec.vi ‏27 KB

SSMS 2012:FOR XML PATH Using XPath Node Tests-Columnn name 'test()' contains an invalid XML identifier as required by FOR XML?

Hi all,
I am learning XPATH and XQUERY from the Book "Pro T-SQL 2008 Programmer's Guide" written by Michael Coles, (published by apress). I copied the Code Listing 12-8 FOR XML PATH Using XPath Node Tests (listed below) and executed it in my
SQL Server 2012 Management Studio:
--Coles12_8.sql // saved in C:/Documemnts/SQL Server Management Studio
-- Coles Listing 12-8 FOR XML PATH Using XPATH Node Tests
-- Retrieving Name and E-mail Addresses with FOR XML PATH in AdvantureWorks
-- 16 March 2015 0935 AM
USE AdventureWorks;
GO
SELECT
p.NameStyle AS "processing-instruction(nameStyle)",
p.BusinessEntityID AS "Person/@ID",
p.ModifiedDate AS "comment()",
pp.PhoneNumber AS "test()",
FirstName AS "Person/Name/First",
MiddleName AS "Person/Name/Middle",
LastName AS "Person/Name/Last",
EmailAddress AS "Person/Email"
FROM Person.Person p
INNER JOIN Person.EmailAddress e
ON p.BusinessEntityID = e.BusinessEntityID
INNER JOIN Person.PersonPhone pp
ON p.BusinessEntityID = pp.BusinessEntityID
FOR XML PATH;
I got the following error message:
Msg 6850, Level 16, State 1, Line 2
Column name 'test()' contains an invalid XML identifier as required by FOR XML; '('(0x0028) is the first character at fault.
I have no ideas why I got this error message. Please kindly help and advise me how to resolve this error.
Thanks in advance, Scott Chang

Hi Michelle, Thanks for your nice response.
I corrected the mistake and executed the revised code. It worked nicely.
I just have one question to ask you about the appearance of the xml output of my Co;les12_8.sql:
<row>
<?nameStyle 0?>
<Person ID="1" />
697-555-0142<Person><Name><First>Ken</First><Middle>J</Middle><Last>Sánchez</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="2" />
819-555-0175<Person><Name><First>Terri</First><Middle>Lee</Middle><Last>Duffy</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="3" />
212-555-0187<Person><Name><First>Roberto</First><Last>Tamburello</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="4" />
612-555-0100<Person><Name><First>Rob</First><Last>Walters</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="5" />
849-555-0139<Person><Name><First>Gail</First><Middle>A</Middle><Last>Erickson</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="6" />
122-555-0189<Person><Name><First>Jossef</First><Middle>H</Middle><Last>Goldberg</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="7" />
181-555-0156<Person><Name><First>Dylan</First><Middle>A</Middle><Last>Miller</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="8" />
815-555-0138<Person><Name><First>Diane</First><Middle>L</Middle><Last>Margheim</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="9" />
185-555-0186<Person><Name><First>Gigi</First><Middle>N</Middle><Last>Matthew</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="10" />
330-555-2568<Person><Name><First>Michael</First><Last>Raheem</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="11" />
719-555-0181<Person><Name><First>Ovidiu</First><Middle>V</Middle><Last>Cracium</Last></Name><Email>[email protected]</Email></Person></row>
<row>
I feel this xml output is not like the regular xml output. Do you know why it is diffrent from the regular xml xml output? Please comment on this matter.
Thanks,
Scott Chang
What do you mean by regular xml document? Are you referring to fact that its missing a root element? if yes it can be added as below
USE AdventureWorks;
GO
SELECT
p.NameStyle AS "processing-instruction(nameStyle)",
p.BusinessEntityID AS "Person/@ID",
p.ModifiedDate AS "comment()",
pp.PhoneNumber AS "text()",
FirstName AS "Person/Name/First",
MiddleName AS "Person/Name/Middle",
LastName AS "Person/Name/Last",
EmailAddress AS "Person/Email"
FROM Person.Person p
INNER JOIN Person.EmailAddress e
ON p.BusinessEntityID = e.BusinessEntityID
INNER JOIN Person.PersonPhone pp
ON p.BusinessEntityID = pp.BusinessEntityID
FOR XML PATH('ElementName'),ROOT('RootName');
replace ElementName and RootName with whatever name you need to set for element as well as the root element
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

How to create and use a node globally as well as internal table

HI,
Kindly let me know how can I create a node & internal table globally and which I can use them in various methods in view and controller as well, if u can provide an example it could be very help full.
my requirment is uploading a multiple files in wdp ABAP for this I just followd the link below
http://wiki.sdn.sap.com/wiki/display/WDABAP/UploadandDownloadfilesinWebdynproABAP
which for single upload and for making this for multiple upload I need a node could be usefull globally or a IT please check my code below
DATA lo_nd_n_upload TYPE REF TO if_wd_context_node.
    DATA lo_el_n_upload TYPE REF TO if_wd_context_element.
    DATA ls_n_upload TYPE wd_this->element_n_upload.
    DATA lo_nd_n_file_download TYPE REF TO if_wd_context_node.
    DATA lt_n_file_download TYPE wd_this->elements_n_file_download.
    data ls_file_upload TYPE ZFILE_UPLOAD1.
   ZFILE_UPLOAD_1 = wd_componentcontroller->Elements_ZFILE_UPLOAD_1.
     t_file_upload = ig_componentcontroller->ITAB1.
   t_file_upload = wd_this->zfile_upload1.
   navigate from <CONTEXT> to <N_FILE_DOWNLOAD> via lead selection
     lo_nd_n_file_download = wd_context->get_child_node( name = wd_this->wdctx_n_file_download ).
navigate from <CONTEXT> to <N_UPLOAD> via lead selection
    lo_nd_n_upload = wd_context->get_child_node( name = wd_this->wdctx_n_upload ).
get element via lead selection
    lo_el_n_upload = lo_nd_n_upload->get_element( ).
@TODO handle not set lead selection
    IF lo_el_n_upload IS not INITIAL.
get all declared attributes
    lo_el_n_upload->get_static_attributes(
      IMPORTING
        static_attributes = ls_n_upload ).
ls_n_upload will contain the File name file type and file contents *
   ls_n_upload-file_size = xstrlen( ls_n_upload-file_content ).
   ls_file_upload-FILE_NAME = ls_n_upload-FILE_NAME.
   ls_file_upload-FILE_TYPE = ls_n_upload-FILE_TYPE.
   ls_file_upload-FILE_SIZE = ls_n_upload-FILE_SIZE.
   ls_file_upload-FILE_CONTENTS = ls_n_upload-FILE_CONTENT.
   append ls_file_upload to t_file_upload.
   clear ls_file_upload.
lo_nd_n_file_download->bind_table( new_items = t_file_upload set_initial_elements = abap_true ).
ENDIF.
so here I would like use t_file_upload(node or IT ) to use globaly which can keep the previous data and I can add the existing data and in another method I would like to submit the data in t_file_upload to table
Regards
raj

Hi Chandra,
Resloved, I createa table type in SE11 by giving my table name as a line type and I used that as a Global IT in view "attributes" tab and I made the my code as follows its working now
    DATA lo_nd_n_upload TYPE REF TO if_wd_context_node.
    DATA lo_el_n_upload TYPE REF TO if_wd_context_element.
    DATA ls_n_upload TYPE wd_this->element_n_upload.
    DATA lo_nd_n_file_download TYPE REF TO if_wd_context_node.
    DATA lt_n_file_download TYPE wd_this->elements_n_file_download.
    data ls_file_upload TYPE ZFILE_UPLOAD1.
    data t_file_upload TYPE standard table of ZFILE_UPLOAD1.
   navigate from <CONTEXT> to <N_FILE_DOWNLOAD> via lead selection
     lo_nd_n_file_download = wd_context->get_child_node( name = wd_this->wdctx_n_file_download ).
navigate from <CONTEXT> to <N_UPLOAD> via lead selection
    lo_nd_n_upload = wd_context->get_child_node( name = wd_this->wdctx_n_upload ).
get element via lead selection
    lo_el_n_upload = lo_nd_n_upload->get_element( ).
@TODO handle not set lead selection
    IF lo_el_n_upload IS not INITIAL.
get all declared attributes
    lo_el_n_upload->get_static_attributes(
      IMPORTING
        static_attributes = ls_n_upload ).
ls_n_upload will contain the File name file type and file contents *
   ls_n_upload-file_size = xstrlen( ls_n_upload-file_content ).
   ls_file_upload-FILE_NAME = ls_n_upload-FILE_NAME.
   ls_file_upload-FILE_TYPE = ls_n_upload-FILE_TYPE.
   ls_file_upload-FILE_SIZE = ls_n_upload-FILE_SIZE.
   ls_file_upload-FILE_CONTENTS = ls_n_upload-FILE_CONTENT.
   append ls_file_upload to ME->wd_this->gt_file_upload .
   clear ls_file_upload.
lo_nd_n_file_download->bind_table( ME->wd_this->gt_file_upload ).
   endif.
thanks for the support.
Regards
Raj

What is the right way to display a table in Java web dynpro using a node.

Hi experts,
I am trying to show a node of cardinality 0...n as a table in an adobe form in Java web dynpro. But its not showing it properly. Can anybody please tell me what is the right way to display a table on adobe form using a node of cardinality 0...n or 1...n in Java Webdynpro. In ABAP webdynpro, we can drag and drop a node of cardianlity 0...n or 1...n to show as a table and it works fine. Is the same possible in Java webdynpro also. Please help.
Thanks and Regards.
Vaibhav Tiwari.

Please refer to my post.. you will get the answer
Dynamic Table - same data repeating in all rows
Special care should be taken in designing the context for table attribute.
The attribute type singletone also plays a important role. I have this doubt from the beginning when you have reported this problem for the first time but finally you marked it as solved so i thought there might be some other issues but again when you reported that again i did some analysis.
Now coming to final solution :
For designing a table in adobe interactive form you have consider following
You have to design the view context upto three level, I am explaining you the properties
PDFDataSource (Parent Level1) - Cardinality 1:1 - Signetone -True - This is assigned to datasource
TableList (Parent Level2) - Cardinality (1:1) - Signetone -True
TableWrapper(Parent Level3) - Cardinality (0:n) - Signetone -True
TableData (Parent Level4) - Cardinality (0:1) - Signetone - false (This is the main point)
Then under TableData value node, you have to put all your table attributes.
This Value Node name can be anything but hierarchy should be same as I have mentioned above.
Please try out these steps and get back to me if you have any doubt.

How to run a form using tree node selection??

hi...
i have populated a tree with all the form name.There is a particular id for every form.i want to show a form using tree node selection.What i did...i write a trigger in button's click event when the tree node is selected then i get a id.if id=1 then open_form('test.fmx').when i want to execute this code then it is showing the same form 2 times.Can anyone help me to solve my problem?If so plz tell me what code i have to write to show a form using node selection?.

I've done the same thing, and i think it works fine.
Check this code (Sorry for the long post, but i cannot find how to attach files.
PACKAGE menu_pk IS
--Initialization of the menu.
procedure Init;
--Called from WHEN-TREE-NODE-EXPANDED
procedure Expanded;
--Called from WHEN-TREE-NODE-ACTIVATED
procedure ExecuteCommand;
END;
PACKAGE BODY menu_pk IS
MENU_NAME constant varchar2(30) := 'menu.menu';
cursor c_menu(pRoot in varchar2) is
select apm_code, apm_parcode, apm_descr, decode(apm_type, 0, Ftree.EXPANDED_NODE, Ftree.LEAF_NODE) apm_type,
decode(apm_type, 0, 'menu', 1, 'form', 2, 'report') || '.ico' apm_icon
from app_menu
where apm_parcode = pRoot
order by apm_code asc;
procedure Init is
     new_node ftree.node;
begin
     for i in c_menu('root')
     loop
new_node := Ftree.add_tree_node(MENU_NAME, FTree.ROOT_NODE,
Ftree.PARENT_OFFSET, Ftree.LAST_CHILD,
i.apm_type, i.apm_descr, i.apm_icon, i.apm_code);
     end loop;
end;
procedure FillNode(pNode in FTree.Node) is
     new_node ftree.node;
begin
     for i in c_menu(FTree.get_tree_node_property(MENU_NAME, pNode, FTree.NODE_VALUE))
     loop
new_node := Ftree.add_tree_node(MENU_NAME, pNode,
Ftree.PARENT_OFFSET, Ftree.LAST_CHILD,
i.apm_type, i.apm_descr, i.apm_icon, i.apm_code);
     end loop;
end;
procedure DeleteNodeChilds is
node FTree.NODE;
begin
     loop
node := FTree.Find_Tree_Node(MENU_NAME, '',
     FTree.FIND_NEXT_CHILD, FTree.NODE_VALUE,
     name_in('system.trigger_node'), name_in('system.trigger_node'));
          exit when Ftree.ID_NULL(node);
          FTree.delete_tree_node(MENU_NAME, node);
     end loop;
end;
procedure Expanded is
begin
     if (FTree.GET_TREE_NODE_PROPERTY(MENU_NAME, :system.trigger_node, FTree.Node_State) = FTree.EXPANDED_NODE) then
     menu_pk.FillNode(name_in('system.trigger_node'));
     else
          menu_pk.DeleteNodeChilds;
     end if;
end;
procedure ExecuteCommand is
cursor c_command(pCode in varchar2) is
select apm_form, apm_type
from app_menu
where apm_code = pCode;
fCommand c_command%rowtype;
fMenuCode varchar2(20);
begin
     -- if it is as menu node then exit.
if (not FTree.Get_Tree_Node_Property(MENU_NAME, :system.trigger_node, FTree.NODE_STATE) = FTree.LEAF_NODE) then
     return;
end if;
fMenuCode := FTree.Get_Tree_Node_Property(MENU_NAME, :system.trigger_node, FTree.NODE_VALUE);
     open c_command(fMenuCode);
     fetch c_command into fCommand;
     close c_command;
     if (fCommand.apm_type = 1) and (fCommand.apm_form is not null) then
          globals.Set_MenuChoice(fMenuCode);
          OPEN_FORM(fCommand.apm_form);--, ACTIVATE, SESSION);
     end if;
end;
END;
The menu table definition follows.
create table APP_MENU
APM_CODE VARCHAR2(10) not null,
APM_PARCODE VARCHAR2(10) not null,
APM_DESCR VARCHAR2(40) not null,
APM_TYPE NUMBER(1) not null,
APM_FORM VARCHAR2(50)
alter table APP_MENU
add constraint APP_MENU_PRI primary key (APM_CODE);
Hope this helps

Custom component Search and Result view using value node :pls help

Hi Experts,
I am creating a Custom component with Search and Result view using value nodes.
This is the code I wrote in the Search button event handler method.
The data which gets in lv_search I need to put in lv_col .
Can somebody guide me for this.
Points will be awarded .
METHOD eh_onsearch.
DATA : lv_current TYPE REF TO if_bol_bo_property_access,
         lv_search TYPE zcrm_orgstruct_search,     "Search value node structure
         lv_result TYPE zcrm_orgstruct_result,         "Result value node structure
         lv_col     TYPE REF TO if_bol_bo_col.
lv_current ?= me->typed_context->search->collection_wrapper->get_current( ).
CALL METHOD lv_current->get_properties
    IMPORTING
      es_attributes = lv_search.
me->typed_context->searchresult->collection_wrapper->set_collection( lv_col ).
op_toresultview( ).
ENDMETHOD.
Regards,
Lakshmi

Hi Lakshmi,
Could you please share with us how it was solved.
"CALL METHOD lv_current->get_properties
IMPORTING
es_attributes = lv_search."
Did you get any values in lv_search ?
Because while using value nodes for search view (which inherits from advance search controller class), the above method does not return any search values entered in the fields.
Please let me know how did you solve it.
Thanks & Regards
Vidhya

How to fill or bind data using Value Node in Tree Node

Hi Gurus,
Can anybody help me on how to fill data or bind data using Value Node in Tree Node View. I know how to create Tree Node but not able to show value on the UI in Tree View.
Can u please let if anybody has done it?
Thanks in advance.
Madhusudan

continued...
TRY.
          lv_child = me->node_factory->get_proxy(
                    iv_bo = lv_value_node
                    iv_parent_proxy = me
                    iv_proxy_type = 'ZL_CLASS_CN02' ).
          lv_child->is_leaf = 'X'.
          APPEND lv_child TO rt_children.
        CATCH cx_sy_move_cast_error cx_sy_ref_is_initial.
      ENDTRY.
In the above code iv_bo , lv_value_node will be the actual object of the second node or leaf node here, which will have the same structure of parent node along with data. After/before this, you would need to build table and refresh in do-prepare_output of IMPL class.In the above code iv_bo , lv_value_node will be the actual object of the second node or leaf node here, which will have the same structure of parent node along with data. After/before this, you would need to buid table and refresh in do-prepare_output of IMPL class.
ztyped_context->resultlist->build_table( ).
IF ztyped_context->resultlist->node_tab IS INITIAL.
    ztyped_context->resultlist->refresh( ).
ENDIF.
Also the EH_ONEXPAND has to be implemented and event handled in DO_HANDLE_EVENT. But this expand event has to be delegated to context node directly as CL_BSP_WD_CONTEXT_NODE_TREE will already have the implementation.
ztyped_context->resultlist->expand_node( lv_event->row_key ).
Where in result list is the node ZL_CLASS_CN00.
After typing the whole content , i found this blog :). There are few things i have written more that in the blog. /people/poonam.assudani/blog/2009/06/24/create-a-tree-view-display-in-crm-web-ui
Regards,
Karthik

Using msxsl:node-set as a function to a field in InfoPath 2010

I have been trying to query a node set (from a web service - managed metadata web service infact) without success. I received a GetTermSetsResult that I am trying to parse as an xml using msxsl:node-set().    Currently I am just throwing
up messages about the expression result in a form load rule.   I just get empty node sets. Note that I have even tried querying the xml string directly like in the examples below but the behavior is always the same.
some examples of what I have tried that give empty nodesets:
msxsl:node-set('<Container><TermStore>...'))/Container/TermStore
msxsl:node-set('<Container><TermStore>...'))/Container
msxsl:node-set('<Container><TermStore>...'))/*
These give the following results:
count(msxsl:node-set('<Container><TermStore>...'))) ---> reports "1"
count(msxsl:node-set('<test>...</test><test>...</test>'))) ---> reports "1" when it should say "2"
msxsl:node-set('<Container><TermStore>...'))/node()   ---> returns what looks like the entire xml document
Ultimately I want to populate a listbox with managed metadata (taxonomy/folksonomy) terms in a "codeless" way. I know it is a no brainer to use code behind but where I work they like to see minimum code.

Hello mohrr,
The PCIe-6321 doesn't have internal triggers you you have to export the signals to a PFI line ant the use the signal as external trigger.
If you are not very familiar about how to do that, here you can find two documents that can give you an idea about how does it work.
http://digital.ni.com/public.nsf/allkb/A099C37789AACEE386256E35007338E6?OpenDocument
http://digital.ni.com/public.nsf/allkb/3A7F1402B2A1CE7686256E93007E66C0?OpenDocument
Mr.O
Applications Engineer
National Instruments

Using invoke nodes to change a control on a server vi

I am trying to pass a parameter to a vi running in parallel with my main vi. I am using invoke nodes to do this without any problems. In server.vi I want to respond to a change in the control using an event structure. I have found that when passing the value to the vi using the invoke node from client.vi the event structure does not respond to the change in value. Is this correct behaviour? In the attachment run client and server, any change in the client panel is reflected in server without a response from the event structure. Running server by itself a change in the cluster causes the event structure to respond as expected. Thanks in advance for any help on this.
Attachments:
Test Invoke Node.llb ‏47 KB

The set control value method is the same as using a local variable or the value property - it doesn't fire the event. To fire the event, you need to use the Value(signaling) property. To do this, you need to get a reference to the control. You can do this by taking the Front Panel property of the server VI and wiring that reference into another property node. Then, you get an array of references to all the controls on the FP. You will need to find your control and wire its reference into the signaling property and then the event will fire. There are, of course, other ways of doing this - this one is fairly complicated, since you have to find the reference.
Try to take over the world!

No Query Result After Using Hierarchy Node Variable (Customer Exit)

Hi
I have problem at my query. It doesn't show anything in BEx but when i check the data in BW using tcode LISTCUBE i can display the data.
This problem happen when i change the restrictions for one of characteristic in filter value.
The characteristic is custom Infoobject (ZCPARTNER), which like Infoobject Partner Unit.
Previously I set the restriction with constant value, example : A500,A700,A710,A720,A730,A740 and it worked before.
But when I change it using hierarchy node variable (customer exit), this problem is arise.
Here is my code at ZXRSRU01
WHEN 'ZHIEPART'. --> hierarchy node variable
   BREAK-POINT.
    IF i_step = 2.
    Read from ZZCONSGR information
      LOOP AT i_t_var_range INTO loc_var_range
         WHERE vnam = 'ZZCONSGR' OR vnam = 'ZOCONSGR'. --> read input value from consolidation group variable
        CLEAR l_s_range.
        CLEAR l_s_range-low.
        IF loc_var_range-low EQ '000000000000030000'
           OR loc_var_range-low EQ '000000000000010130'.
          l_s_range-low = 'MEZBUNITMDI'.
          l_s_range-high = '0HIER_NODE'.
        ELSEIF loc_var_range-low EQ '000000000000040000'
           OR loc_var_range-low EQ '000000000000010160'.
          l_s_range-low = 'MEZBUNITMPI'.
          l_s_range-high = '0HIER_NODE'.
        ENDIF.
        l_s_range-sign = 'I'.
        l_s_range-opt = 'EQ'.
        APPEND l_s_range TO e_t_range.
        EXIT.
      ENDLOOP.
    ENDIF.
Here the hierarchy in BW system:
XXX Cons Unit Hierarchy Set; InfoObject ; Node Name
- XXX Cons Unit Hierarchy Set; 0HIER_NODE; ZBUNITALL
- XXX DownStream ... ; OHIER_NODE; MEZBUNITMDI
     - ME/A730; 0CS_UNIT; MEA730
     - ME/A740; 0CS_UNIT; MEA740
- XXX Power ; OHIER_NODE; MEZBUNITMPI
    - ME A800 - A808; OHIER_NODE; MEZBUNITMPI
    - PT Mitra xxx; 0CS_UNIT; MEA820
Anyone can help my problem? Thank you
Regards,
Satria B Tandyono

Hi Satria,
Instead of following code ---
CLEAR l_s_range-low.
IF loc_var_range-low EQ '000000000000030000'
OR loc_var_range-low EQ '000000000000010130'.
l_s_range-low = 'MEZBUNITMDI'.
l_s_range-high = '0HIER_NODE'.
ELSEIF loc_var_range-low EQ '000000000000040000'
OR loc_var_range-low EQ '000000000000010160'.
l_s_range-low = 'MEZBUNITMPI'.
l_s_range-high = '0HIER_NODE'.
ENDIF.
try this ---
IF loc_var_range-low EQ '000000000000030000'
OR loc_var_range-low EQ '000000000000010130'.
l_s_range-low = 'MEZBUNITMDI'.
ELSEIF loc_var_range-low EQ '000000000000040000'
OR loc_var_range-low EQ '000000000000010160'.
l_s_range-low = 'MEZBUNITMPI'.
ENDIF.
Note : whenver the option is EQ, the system takes only low value.

How can i call a DLL file using invoke node from labview?

I cant call a DDL function using call library function.so plz tell me how to use invoke node and call DLL using invoke node
Please Mark the solution as accepted if your problem is solved and donate kudoes

Please stay in the same thread.
- Cheers, Ed

Using complexsection node (smartforms)

Similar Messages

Maybe you are looking for