Using Dynamixel2usb devices on myRIO.
I used the USB devices called USB2DYNAMIXEL.The device is from ROBOTIS,I want to connet it between AX-12A motor and myRIO .
So I follow the steps from link here https://decibel.ni.com/content/docs/DOC-34827#comment-40514 ,but in the step 1 I use the putty to login
myRIO and type the following commands #ls /dev/ttyUSB* but I cannot see anything about ttyUSB0.Did I miss something? I was new to Linux and I tried my best
to search for something that could be help But it didn't work......
Can you give me some advices about this
mumfy75 wrote:
is it possible to use two devices on one itunes account
yes.
more information in this support article.
JGG
Similar Messages
-
Hi. I am just about to move from the UK to Kuwait. Will I have any problems using my iPhone 4 and able to join a local carrier using this device please?
If your phone is locked to a particular carrier, you must contact them to request they unlock it. Once they've taken care of that and you've followed the instructions to complete the unlock process, you will be able to use the phone elsewhere.
~Lyssa -
My apple tv mirroring is slow. So slow it shuts off. Any thoughts on cause? I use this device in my office for presentations without a problem. In my home with a stronger wifi router, I'm having issues.
Welcome to the Apple Community.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment. -
Using a devices camera and adding the image to the display list
Hi,
My students and I have not been able to make an AIR app that can take a picture using the devices camera and then add the image to the display list. We are able to open the devices camera and of course take a picture, but that's it.
We've been using these two tutorials/examples:
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/media/CameraUI.ht ml
and
http://tv.adobe.com/watch/adc-presents/input-for-mobile-devices-camera/
I've uploaded our project: http://www.dayvid.com/professor/camera.zip
Can someone help us out?
Thanks!
Below is the main document class:
package {
import flash.desktop.NativeApplication;
import flash.display.Loader;
import flash.display.MovieClip;
import flash.display.StageAlign;
import flash.display.StageScaleMode;
import flash.events.ErrorEvent;
import flash.events.Event;
import flash.events.IOErrorEvent;
import flash.events.MediaEvent;
import flash.media.CameraUI;
import flash.media.MediaPromise;
import flash.media.MediaType;
import flash.events.MouseEvent;
public class Main extends MovieClip{
private var deviceCameraApp:CameraUI = new CameraUI();
private var imageLoader:Loader;
public function Main()
this.stage.align = StageAlign.TOP_LEFT;
this.stage.scaleMode = StageScaleMode.NO_SCALE;
camera_btn.addEventListener(MouseEvent.CLICK, cameraBtnClicked);
private function cameraBtnClicked(event:MouseEvent):void
if( CameraUI.isSupported )
result_txt.text = "Initializing camera...";
deviceCameraApp.addEventListener( MediaEvent.COMPLETE, imageCaptured );
deviceCameraApp.addEventListener( Event.CANCEL, captureCanceled );
deviceCameraApp.addEventListener( ErrorEvent.ERROR, cameraError );
deviceCameraApp.launch( MediaType.IMAGE );
else
result_txt.text = "Camera interface is not supported.";
private function imageCaptured( event:MediaEvent ):void
result_txt.text = "Media captured...";
var imagePromise:MediaPromise = event.data;
if( imagePromise.isAsync )
result_txt.text = "Asynchronous media promise.";
imageLoader = new Loader();
imageLoader.contentLoaderInfo.addEventListener( Event.COMPLETE, asyncImageLoaded );
imageLoader.addEventListener( IOErrorEvent.IO_ERROR, cameraError );
imageLoader.loadFilePromise( imagePromise );
else
result_txt.text = "Synchronous media promise.";
imageLoader.loadFilePromise( imagePromise );
showMedia( imageLoader );
private function captureCanceled( event:Event ):void
result_txt.text = "Media capture canceled.";
NativeApplication.nativeApplication.exit();
private function asyncImageLoaded( event:Event ):void
result_txt.text = "Media loaded in memory.";
showMedia( imageLoader );
private function showMedia( loader:Loader ):void
this.addChild( loader );
private function cameraError( error:ErrorEvent ):void
result_txt.text = "Error:" + error.text;
NativeApplication.nativeApplication.exit();Hi,
Do I have to add the picture to the cameraroll in order to add it to the AIR apps display list?
Both examples from Adobe claim that their examples work. Do they not?
In the example, the event handler asyncImageLoaded is never called. The output text field shows - result_txt.text = "Asynchronous media promise."; So the Event.COMPLETE is being added. But I don't think it's being dispatched.
Any ideas? -
How do you use 3 devices on one Router?
Hello< I'm new to the forum and new to networking. My question may seem very basic and it may not, I'm not sure. I will say that I have tried to learn things about routers and networking over the past few days with not much success. Of the 3 million plus acronyms used for networking and networking devices, I know maybe two of them, so trying to read about this stuff is like trying to read pig latin.
My set-up is one Lynksys cable modem and a WRT54G wireless router using Comcast cable internet. I have one PC wired to the router, one Xbox360 wired to the router, and one PSP (Playstation Portable) wirelessly connected to the router using a WPA personal. I currently have my router set to "Automatic Configuration - DHCP."
The PC is always connected to the internet and always works, although, once and a while I do get the little yellow shield in my toolbar that says there is an IP conflict. After setting up or resetting the router I can then log on with both my PC and the Xbox at the same time with no trouble. While both the Xbox and PC are looged in,the PSP will not log in,says "could not connect." As soon as I log off the Xbox, the PSP will then be able to connect without doing anything else. If I then log off the PSP I have to reset the router before the Xbox can log in again. If I do not reset the router at this point, and run the Xbox network test utility it will say the IP address has failed.
Is there a way that I can log in with all 3 devices at once? If not, is there a way that I can at least not have to reset the router everytime I switch from the PSP to the Xbox?
Thanks to anyone who replies to this post. I am getting a little frustrated and I can't seem to gain any understanding of these devices or how they work.Firebanshee wrote:
Thanks a lot for that information Sean. Those guides made it extremely easy to set up all my devices to a static IP. I now have all 3 devices logged at the same time and no longer need to reset my router. Nice!
There is one problem though. Now, when I use the test utility on the Xbox, everything is confirmed, but when it gets to NAT it says "moderate." It used to say "open."
IP Adress - Confirmed
DNS - Confirmed
MTU - Confirmed
ICMP - Confirmed
Xbox Live - Connected
NAT - Moderate (should say "open")
This is what it says when I select "more info" under NAT;
"This test indicates the type of NAT that your router or gateway is using. Devices that perform strict or moderate NAT can restrict or limit the ability of gamers to find each other, participate in sessions, or hear each other on Xbox Live. If your router or gateway is using a strict or moderate NAT, replace it with a Xbox Live compatible device. For a listing of compatible devises visit www.xbox.com."
I have since tried joining a live game session and everything seemed to work fine, although I havn't yet had a chance to confirm if the Live voice chat is working yet.
I have checked the Xbox website and found that my modem is certified Xbox Live compatible. It lists WRT54G (V1, V2, and V3) supporting firmware version 3.01.3 and 3.03.6. It also states that firmaware v2.02.7 will not allow you to log onto Xbox Live, so I know I don't want that version. In my router's set-up menu it says Firmware v1.00.9. Should I update my firmware? Am I missing something else?
Again, thanks for your help and hopefully I can figure out this "moderate" thing.
Hi
Well first of all , No worries budd.
and secondly ,
am happy about the fact u did the settings correctly ,thats why u able to get online with All three devices . appreciate it .
Thirdly ,
firmware could be an issue . as u stated u firmware version on router showin as v1.00.9 . i found out it is WRT54G v5.
upgrade the router to the latest firmware version - v1.02.5 !
How to upgrade the router in correct mannar , click this magic link .
Fourth , if stll problem persist !
enable the port forwards in the correct mannar for the static ip u provided to xbox, follow this magic link 2 for more info.
hope for gudd..
pe@c3
"What u Give , is wht u better start expecting to take back".. - http://Forsakenbliss.wordpress.com -
Can separate apple ids be set up for individual family members that use different devices (iPads & iPhones)? Several family members are tied to one apple id (email address). Thanks.
How to use multiple iPods, iPads, or iPhones with one computer
http://support.apple.com/kb/HT1495
How to Share a Family iPad
http://www.macworld.com/article/1163347/how_to_share_a_family_ipad.html
Using iPhone, iPad, or iPod with multiple computers
http://support.apple.com/kb/ht1202
iOS & iCloud Tips: Sharing an Apple ID With Your Family
http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/
How To Best Use and Share Apple IDs across iPhones, iPads and iPods
http://www.nerdsonsite.com/blog/2012/06/07/help-im-appleid-confused/
Cheers, Tom -
my iphone 4 will no longer connect to my Itunes since 7.1.1 update, itunes has latest update as well followed help which involved using mobile device properties no good re installed itunes still same problem iphone is showing up on pc as connected but itunes unable to see it
any Ideas cheersTry holding the power and home button untill the apple symbol appears and let it reboot, if that does not work Try a DFU restore https://discussions.apple.com/thread/5269891
-
How do I download the music from iTunes onto an old iPhone 3gs without affecting my iPhone 5? I have reset the iPhone to factory settings and when I plug it in it wants to use the device name for my current iPhone 5 and I don't want to change anything on my current iPhone. iTunes won't let me change the device name for the 3gs. I just want to use the old iPhone like an touch.
Hi littlemansa,
If I am understanding you correctly, it sounds like you are returning to an old iPhone that has been erased and you would like to set it up as a new device without restoring from a backup which would affect the name of your iPhone, as well as the contents therein. I have an article for you that can help you set up your iPhone as a new device, and that information can be found below:
How to erase your iOS device and then set it up as a new device or restore it from backups - Apple Support
http://support.apple.com/en-us/HT4137
Basically, it seems like you may be stuck on a screen that is asking if you would like to restore your device from the backup that is filed under the name of your new iPhone, or if you would like to set up the device as a new device. I would suggest that you set it up as a new device to achieve your desired results.
Take care, and thanks for visiting the Apple Support Communities.
-Braden -
I bought a used iPhone and found him email iCloud does not affect me so how can I deleted this email in order to use the device freely and privacy
help me pleaseYou can't. Return the phone for a refund, if you can, because without the previous owner's Apple ID/Password, you will not be able to re-activate the phone. It will be useless to you.
Apple can't/won't help you with this. -
I have installed the new up to date itunes which i can open on my PC, however when i connect my ipad or iphone i get an error saying i cannot use the device as the require software isn't installed?? I'm very confused please help......
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
Can I sync email between iPad mini, iPad, and MacBook so that if I delete email using one device, it will also be deleted from the other two?
You have to set up the email account using IMAP instead of POP.
What type of email address is it? Yahoo, hotmail, gmail, etc?
~Lyssa -
Is apple going to use there devices on hzo
Is apple going to use there devices on hzo
Sorry, no one here will know Apple's future plans.
-
Using Firewire devices with your MacBook
My wife recently purchased a new MacBook and decided that she wanted to try editing video from our camcorder. We have a Sony DCR-HC26 with firewire and USB 2.0 ports. If necessary, we can use the software provided by Sony and the USB port to import the video but Sony says that the video quality is much better using the firewire port. Unfortunately, Apple chose not to provide a firewire port on the new MacBook and there are no ports for installing a card. Is anyone aware of options available to use firewire devices with your MacBook? It seems as though this would be a common problem given the number of legacy firewire devices out there. I researched adapters but the only one I found is currently only supported by Windows XP and that doesn't do us any good. Thanks for the help.
The current white Macbook and the Macbook Pro has Firewire.
http://www.apple.com/macbook/white/
http://www.apple.com/macbookpro/
There are no USB to Firewire adapters. (Desperate aluminum Macbook owners are looking, but it can't be done.) Firewire MUST be in the computer. -
Using USB Device through Parallels Desktop / CIT200 Skype Phone
Hi. I have the Linksys CIT200 cordless phone that I use with Skype. I am a recent convert from PC and this is my first mac. I have Parallels desktop installed and everything in that seems to work fine.
When I plugin the CIT200 base station, it does not give me the popup that says "Would you like to use this device in Windows XP....." Also, in System Profiler, I do not see the CIT200 device even recognized. It is getting power because it powers up...
How can I get my mac to recognize this USB device, and then give Windows control of it through Parallels?No, not at all.
The application works just fine. I mean a wireless handset (basically, a telephone that connects to the computer via a USB docking station. Much like the one I linked to in the original post, although hopefully one that actually works with the OS 10.6.
Without the "skype phone" you have to physically sit down at your computer to make a skype call. With the handset, you can walk around the house while on a skype call. You can also both initiate and receive calls from the handset while not physically at your computer (so long as the skype application is running and you are within range, usually 100-300 feet). -
Good morning,
I would like to make some i/o test with a database version 10g, actually I have the redo log on standard zfs filesystem (cooked), I would like to
migrate this redo log on raw device without recreating the database, is this possible ?
Thanks for your help
Fabrice ChapuisOne more question, in case of node failure , redo on raw device are more critical for a recover than if they were on a filesystem ?More critical? Or more difficult?
Redo is critical, period. Does not matter whether you use a cooked file system or a raw device.
As for difficulty - that depends on what you are attempting to do. If you want to treat the raw device as a file system, that will be difficult as it it not a file system. (which kind of begs the question as to treat it like a file system when it is not?)
From a RMAN perspective - a device is a device. RMAN does not care.
From a DB perspective - that is why ASM exist. To remove the complexities of using raw devices, and eliminate the requirement of needing to use an external Volume Manager. And provide the DBA with a familiar SQL*Plus interface and SQL commands to administer ASM.
It may seem difficult at first - but anything that needs a learning curve to go through, tends to seem difficult in the beginning. All you need to do is learn the basics and grasp the concepts.. and that +"difficulty"+ disappears.
Maybe you are looking for
-
I just replaced my ipod touch 2nd gen with another how can i get my itunes back
i just replaced my ipod touch 2nd gen with the same model and cant seem to get my iyunes back
-
JDev 10.1.3 compile error in servlet 2.4 web.xml
I built a Servlet 2.4/JSP 2.0 application in JDev 10.1.3. When I try to make/compile/deploy it the compiler gives me errors like the following for every JSP file that has a JSTL 1.1 taglib: Error(2,9): Element "web-app' used but not declared Error(2,
-
HP is the worst company I have had to deal with ever.
About a month and a half ago my computer broke due to a botched BIOS update. I sent it in to get it repaired under warranty, and it took them roughly a month to get it back to me (even though they said it would be back in 5-6 business days). When I f
-
Please help anyone who can. Firstly I know I have very little RAM on my system, only 4GB but I've been rendering the same kinds of files for weeks with no problems until the last few days. They biggest issues is as follows: My timeline in Premiere Pr
-
The signatures and text in my digitally signed pdf are garbled
How do I convert this type of document to word using the adobe converter without it coming out garbled. The signatures show as weird text.