Using Essbase on Blade Servers

Hi,
What do you think about using Essbase (as part of EPM) on Blade Servers (eg. [HP BS|http://h18000.www1.hp.com/products/blades/components/matrix/main.html])
I need for your experience and examples of performance of this stack.

It being a blade or not a blade is not as relevant as processor speed, I/O, and memory. One thing to consider about blades is depending on your configuration it can limit memory.
In short a blade will be perfectly fine presuming it can scale to the level you need for your given design and number of users.
Regards,
John A. Booth
http://www.metavero.com

Similar Messages

Is it possible to use UCS Blade Servers in ACE Load Balancing

Hi all ,
Is it possible to use UCS Blade Servers in ACE Load Balancing ?? Please note that UCS Blade Servers are not connected directly to 6500 Switch where ACE Module installed .i am expecting a good suggestion from whether ACE or Switching Expert
Thanks in advance
Sanjeevi

There is nothing that would prevent you from loadbalancing the applications that run on UCS servers. ACE can loadbalance applications that are directly L2 attached (bridged or routed mode) or even servers that are multiple hops L3 hops away using one-armed mode with source nat. The key to this is that the return traffic from the server needs to make it back to the ACE.

New blade servers

i have new b22 blade server ineed to install esxi on it ,but the admin for ucs for another team .can i use console to configure the the two server and islote the mangment and install esxi on the two blade .
i need help for this issue.

so you mean that you want to install ESXi on UCS B22 server but you are not the admin of the UCS. so you want to go attach keyboard and monitor to the blade directly to install ESXi on that server, is that the case?
Before you install the ESXi on the server, make sure the UCS admin has assigned a service profile to the server.
There are 2 ways for you to install ESXi on the server directly.
1. use the cable blew and attach it to the server, the connector supports USB/VGA/DB9 Serial port
http://www.cisco.com/en/US/docs/unified_computing/ucs/hw/blade-servers/B22.html#ID129
2. alternatively, you can ask the UCS admin to create a user for you on UCS which only allows accessing the KVM, then you can remotely log on to the UCS and install ESXi. the previliage required for this role is "Service Profile Server Oper"

Clustered blade servers

We're currently investigating a hardware refresh of our production landscape and we've come across a bit of a stumbling block. For the record, we're not particularly big, currently running ERP 2005 with a database instance and the central instance on dual quad-core x64 1.83GHz processors with 16GB RAM each and two application servers on four quad-core x64 pre-Core-architecture processors with 8GB RAM each. It's all hooked together on a gigabit Ethernet switch (two gigabit connections per server using teaming) and all storage is internal to each server except for the database instance which has an external SCSI RAID array.
We're now upsizing and are finding ourselves once again on the very limits of what the x86/x64 systems available to us can offer, except this time, we're not sure it's enough. We're investigating blade servers as a potential way to move forward but the documentation of how a "clustered blade" server works is sketchy at best. Itanium, for us, doesn't really hold the answer; sure you can fit 128 processors into the same server but we don't have £1m to spend!
So, my questions are:
What actually is a clustered blade server?
How does it work? Do I assign physical blades to a logical server and they all work together as one much faster server, or is it just for failover purposes?
Is it still possible to use SAP's recommendations about keeping the operating system, SAP executables, the database, the database log file and the swap space (etc. etc.) on physically seperate drives if we move to Fibre Channel based storage, or is that no longer something to worry about, does it even matter any more?
Do SAP have any recommendations with regards clustered blade servers?
Has anyone ever had experience of using clustered blade servers to run ERP 2005? Anything I should know?
The impression I get of blade servers is that they are to servers what RAID is to hard disk drives, but I'd just like a bit of advice from anyone who can give it before I start spending money!
Many thanks,
Rob Moss
Mark Two
Bolton, UK

You can export a VM with snapshots and import those to a later version.
If your snapshots were taken while the VM was running, then the running VM state file needs to be deleted. (the .bin / .vsv) as the running memory state is never supported when upgrading.
Now, the other issue. 2012 R2 cannot import a VM from 2008 R2. Only 2012 can import any of the 2008 releases, and the 2012 R2 release. (yes, there was a fundamental change made and 2012 was the cross-over release).
The way to handle this is:
1) try copying the entire VM folder (without exporting) and import to 2012 R2 (test this please).
2) Use 2012 to Import the export from 2008 R2, then upgrade to 2012 R2.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

10g RAC on Blade Servers (HP C-Class)

All
Just wanted to know anyone's take on deployment of 10g RAC on blade servers -
Challenges, recommendations, etc. Anyone out there deployed a mission critical oltp application running RAC on blade servers?
Appreciate a response
Thanks - KP

Have several RAC blade clusters. Not using HP's blades though. The biggest one (12 nodes) is over 2 years old. The only h/w issue during that time as far as I can recall, was a power supply that blew. Vendor replaced and it was business as usual.
We are btw replacing all our HP boxes (old L classes mostly) with blade clusters. Given the stability and robustness of our big cluster, and that of the blades we're using for development, web servers and stand-alone database servers (running SE), we've decided to make this our standard h/w architecture. Of course, financially this receives a lot of noddy points from the bean counters. ;-)

Does BIA Blade servers suppot virtualization

Hi,
I have a question, would like to know if the BIA Blade servers support virtulization? Is it possible to implement BIA on the Blade servers with VMware installed on it, there by enabling virtualization?. Does the BIA blade servers support virtualization?
Thanks and Regards,
Archana

Hi Archana,
as Vitaliy already mentioned VMware is currently not supported. The reason therefore is relative easy. BWA is based on the TREX search engine and there is some interesting note which you should take a look (1303814 - TREX 7.1: Usage of TREX on Virtual Machines (VM))
The two reasons are why it also won´t be supported in near future:
1) TREX can be used in virtual environments for low-data-volume scenarios. Please note that the published sizing rules may become invalid. SAP has measured TREX performance losses up to 30%, depending on the virtualization solution. If TREX performance issues in virtual server environments arise, make sure you have configured your virtual machine correctly. Reserving memory (and in some cases CPU) are recommended to rule out shortness of resources on the virtualization host in case of resource contention. A detailed resource planning is absolutely mandatory!
2) TREX should be run on physical servers in high-load environments.
There is no note especially for BWA, but it´s not supported in cause of the low CPU load of the vmware HW. You won´t get support if you install your prod environment on VMware! If you take the chance you can setup your test environment on VMware, but normally you also won´t get support in case of an error. I think this depends on the philosophy of your company...
Regards,
Jens

BI Acclerator Blade servers backups

Hi,
We have BIA running on HP blade servers and currently we have a procedue where they are taking
backup with some scripts and the scripts are generating some initiator files. ( which are some files on each blade server)
But can anybody provide me the info. how these initiator files are useful in backup / restoration of BIA.
The documentation of SAP shows a different procedure for backup/ restore.
BR,
DVRK

Not really sure what do you mean by "initiators"... in anycase if you are talking about BI Accelerator Backup Blades is a HA solution for enterprise search, so you should stick to the TREX backup/restore procedures IMO.
Read,
http://help.sap.com/saphelp_smehp1/helpdata/en/48/3d60b9c0dd4bb9e10000000a42189b/content.htm
In anycase I have no experience under this particular subjects so I let others lead the way... do please add as much info as possible to the thread so Its easier to follow.
Regards
Juan

Lync on Blade Servers supported?

Hi All,
is it supported to deploy Lync 2013 Frontend Servers on Blade Servers?
The reason for the question is: the Blade Servers use a Converged Network Adapter. As far as I know this is shared between multiple blade Servers. For Frontend Servers, TechNet recommends dedicated network interfaces with teaming.
The Blade servers also share a SAN and boot from there. Is this supported?
Many Thanks in Advance,
Hanno98

I would think that would be supported yes, if you think about it, it's really no different than a virtual environment which is also supported. Virtual servers share network adapters and boot from SAN storage. You're just dedicating resources
here. Recommended isn't always a must.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Error 1030723 Unable to get UTF-8 locale when using Essbase API 11.1.1

Now I got a question about how to connect to an Essbase Server by using essbase client API (11.1.1). I encountered an error “Unable to get UTF-8 locale” when I tried to EssInit((pInitStruct, phInstance) API.
However, I had no problem to call the API if I uses essbase previous client APIs (7.1 or 9.3).
I passed the “ESS_API_UTF8” to usApiType field in the ESS_INIT_T struct. When I openned the “essapi.h” header file, I found these are some new fields (highlighted in red color below) added in the essbase client API (11.1.1)
ESS_TSA_API_typedef_struct(ess_init_t)
ESS_TSA_ELEMENT(ESS_ULONG_T, Version); /* This should be set to ESS_API_VERSION */
ESS_TSA_ELEMENT(ESS_PVOID_T, UserContext); /* void pointer to user's message context */
ESS_TSA_ELEMENT(ESS_USHORT_T, MaxHandles); /* max number of context handles required */
ESS_TSA_ELEMENT(ESS_SIZE_T, MaxBuffer); /* max size of buffer that can be allocated */
ESS_TSA_ELEMENT(ESS_STR_T, LocalPath); /* local path to use for file operations */
ESS_TSA_ELEMENT(ESS_STR_T, MessageFile); /* full path name of message database file */
ESS_TSA_ELEMENT(ESS_PFUNC_T, AllocFunc); /* user-defined memory allocation function */
ESS_TSA_ELEMENT(ESS_PFUNC_T, ReallocFunc); /* user-defined memory reallocation function */
ESS_TSA_ELEMENT(ESS_PFUNC_T, FreeFunc); /* user-defined memory free function */
ESS_TSA_ELEMENT(ESS_PFUNC_T, MessageFunc); /* user-defined message callback function */
ESS_TSA_ELEMENT(ESS_STR_T, HelpFile); /* user-defined help file path */
ESS_TSA_ELEMENT(ESS_PVOID_T, Ess_System); /* reserved for internal use */
ESS_TSA_ELEMENT(ESS_USHORT_T, usApiType);
ESS_TSA_ELEMENT(ESS_PCATCHFUNC_T, CatchFunc); /* user-defined kill-own-request signal callback function */
ESS_TSA_ELEMENT(ESS_PCATCH_INIT_FUNC_T, CatchInitFunc); /* user-defined kill-own-request signal initialization callback function */
ESS_TSA_ELEMENT(ESS_PCATCH_TERM_FUNC_T, CatchTermFunc); /* user-defined kill-own-request signal termination callback function */
ESS_TSA_ELEMENT(ESS_PCOOKIE_CREATE_FUNC_T, CookieCreateFunc); /* user-defined cookie creation function */
ESS_TSA_ELEMENT(ESS_PCOOKIE_DELETE_FUNC_T, CookieDeleteFunc); /* user-defined cookie creation function */
} ESS_TSA_END(ESS_INIT_T);
I could not find any document to introduce the API (11.1.1. And what does the error “Unable to get UTF-8 locale” mean? How can work around it. Any environment parameters or paths need to be set?
Please advise.

Hi,
The API documentation for V11 is available from :- http://download.oracle.com/docs/cd/E12825_01/epm.111/esb_apiref/frameset.htm?launch.htm
Hopefully it might point you in the right direction.
Cheers
John
http://john-goodwin.blogspot.com/

Unable to load data into Essbase cube using Essbase Studio

Hi
We are creating an essbase cube using Essbase Studio using flat files as data sources.
We have taken different hierarchies into different flat files and created one fact file having dimension intersection along with data.
We are able to create the cube and the hierarchy but not able to load any data.
We are getting the following error
Failed to deploy Essbase cube.
Caused by: Unable to perform dataload from more than one flat file.
Could anyone please help on this?

Oh this was killing me, so I did this test in 11.1.1.3:
1) Excel 2007 format -- no go, Essbase didn't see it
2) Excel 2003 format, three sheets -- only the first sheet was read into an empty rule
3) Excel 2003 format, one sheet -- the first sheet was read into an empty rule
4) Excel 95 format, one sheet -- the first sheet was read into an empty rule
The lesson?
1) Excel 2007/2010 sheets don't work (no surprise there as the .xlsx format isn't supported).
2) Excel 2003 and lower (hey, if you have Excel 4, I'll bet that works as well) work, but only the first sheet is recognized.
Regards,
Cameron Lackpour

I need to confirm this: Can the UCS servers be used instead of MCS servers for Voice applications?

hello friends,
The question is the same as in another discussion, so I ask you to help me confirm it, the UCS servers Can be used instead of MCS servers in Cisco `s Applications like: CUCM, Cisco Unified Presence, Meeting Place, etc?
I could show someone a link that you mention it and show its own applications?
Regards,

need upgrade ccm version to 8.0

Using iWeb on other servers than dot MAC?

Can people confirm that one can use iWeb with other servers than Apple's dot Mac site? The fine print says: *iWeb publishing requires Internet and webserver access (.Mac recommended). So from that I guess it is feasible but is it easy to set up?
Thanks
Rudy

After the sales rep at the Apple store confirmed vehemently that I would lose no functionality publishing to my own server, I was disappointed to discover this was not the case.
I wanted to use my own webserver, since there is a perfectly capable apache server already running on my iMac. I do understand that Apple wants to sell their dotmac product, but they have stranded too many users with their approach on iWeb.
I upgraded to iLife 06 specifically for iWeb, and I feel cheated by the withdrawal of functionality unless I buy their dotmac product.

Can we use Essbase JAVA API in Hyperrion Planning

Hi,
I want to load data and extract data from Hyperion Planning applications. can i use Essbase Java APIs to do this Or is there any separate set of APIs available for Planning Applications ?
Thanks a lot,
Prince

Hi John,
I have following doubts regarding loading data to Hyperion planning by a custom connector
1) Loading data to Hyperion Planning application using Essbase Java API would be possible at application layer (Hyperion Planning) or at database layer (loading data directly to essbase database) ?
2) If we load data directly to essbase database how are we going to recognize which essbase server is connected with Hyperion Planning application ? Does user require to know in advance the underlying databse server ? Is there any API in Essbase or in Planning to connect to Planning application ?
3) If we load data directly to essbase database how to find out Planning applications and essbase application ? In other words how to differentiate between essbase applications and Hyperion Planning appllications ? Or How to recognize Planning applications ? Is there any API in Essbase to find out this ?
4) If we read data directly from Essbase how do we recognize data from a Planning application ?
5) What is the difference between Classic planning application and EPMA planning application ? Can we develop a connector to work with both these flavour or type ?
Please suggest.
Thanks,
Prince

Using Essbase security filter in OBIEE request ?

Hello,
We would like to use OBIEE 11.1.1.6 with Essbase source. We already use Essbase security filter (on dimensions).
For example, "userA" is allowed to access to Entity A and not Entity B and the opposite for "userB".
If I loggin as "userA" in OBIEE, is it possible for OBIEE to connect to Essbase with "userA" so that Essbase return data only on Entity A and not Entity B ?
Thanks!

Hi,
The way let OBIEE users, have Essbase security filters running for them, is by integrating OBIEE and EPM using Single Sign On. When, both OBIEE and EPM talk to the same Identity Store like OID/MSAD, you can set this up. For more integration steps, refer to http://www.google.com.sg/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&ved=0CDAQFjAA&url=http%3A%2F%2Fwww.oracle.com%2Ftechnetwork%2Fmiddleware%2Fbi-foundation%2Fhfm-sso-obiee-1112x-1835570.pdf&ei=O7ElUeCTApGzrAeelIHwCw&usg=AFQjCNE1BzMQU6Cwny-0IwcvxkfxeqlONg&bvm=bv.42661473,d.bmk
Hope this helps.
Thank you,
Dhar

Using Essbase as source for OBIEE 10.1.3.3

Our company is in the process of implementing OBIEE 10.1.3.3 and I was trying to import an Essbase database (7.1.6) as a source for the Physical layer. However it looks like there was a change from 10.1.3.2 to the version we have. The docs show you can select File/Import/XMLA, however in the newer version instead of XMLA you have "From Multi Dimensional...". When I select this option and fill in the Essbase Server name,ID & pswd it crashes the OBIEE Administrator client.
The error I get before it wants to "Send the Report" mentions this:
AppName: admintool.exe AppVer: 10.1.3.3 ModName: essapinu.dll
ModVer: 7.1.6.6218 Offset: 00008282
I then tried another way by right clicking on the Physical layer and choose "New Database". In there you have a option for the database of "Essbase". However, even when I fill in the server and ID & pswd I can't find anything in the docs showing you how to have it list the Essbase applications and Databases. According to the Oracle Support the docs for 10.1.3.2 are the latest docs which don't mention anything about connecting to Essbase that I can see.
Has anyone tried to use Essbase as the database source for OBIEE 10.1.3.3 and been successful? Any info would be helpful!!
Thanks!

It is my understanding you need at least 10.1.3.3.2 (upgrade/patch).
I'm currently on 10.1.3.3.0 and will be using ESSBASE shortly - so we actually have purchased 10.1.3.3.3 (OBIEE Plus).

Using Essbase on Blade Servers

Similar Messages

Maybe you are looking for