Using Flash and HTML with Sound

Hi All,
I'm a bit of a beginner when it comes to Flash and want to
start using it a bit more but I'm in 2 minds as to which way to
build my site.
I would love to have the functionality still of html and
place the odd bits of Flash in on the site or just create a flash
site but place each page into a seperate html page but there are
issues with the sound. I want ongoing music to be playing but the
tutorials I have looked at seem to lead to a stop start problem
when the visitor clicks from page to page. I want to make it a
search engine friendly as possible which is why one of my options
is to put build seperate html pages for my Flash instead of having
just one.
There may be some coding issues with a couple of pages that
link into databases and I would have to link these pages to pure
html pages for functionality purposes but this would need to be
done either way.
Can anyone advise which way I should go with this and if
there is a solution to the stop, start sound issues with loading
individual pages.
Any help or advice would be hugely appreciated.
Thankyou in advance
Stephen

It works when you put it online... :)1

Similar Messages

Please help flash and html mix

dear Sirs,
I appreciate really your responses and help.
i am trying to make a website that uses flash and html at the
same time i mean only the menu is flash and the rest is html, the
menu and all other parts are well put in table and rows, and cols
but the problem is that i need the button in the menu(flash) to
load dynamicly the content into the page and not reload the whole
stuff(including the flash menu )
thanks for your time

> i am trying to make a website that uses flash and html
at the same time i mean
> only the menu is flash and the rest is html, the menu
and all other parts are
> well put in table and rows, and cols but the problem is
that i need the button
> in the menu(flash) to load dynamicly the content into
the page and not reload
> the whole stuff(including the flash menu )
> thanks for your time
Every time you open page, flash reload from scratch. That's
how it works.
You can use frames and keep the menu in frame, which would be
easiest solution.
Or you could use Shared Object, something like flash's form
of cookies.
Make a record every time you press button, read that record
every time you
open the page and based on result do something with the menu
to indicate
that this is the clicked location, tho take note, it still
will be loading
the file from zero, every single time you open new html page.
Best Regards
Urami
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Hello guys..does anybody know how to install and use adobe master collection with the new lion? I need to use Flash and illustratore, but apparently those programmes are incompatible with the new operative sistem... I am a new mac users and I'd like t

Hello guys..does anybody know how to install and use adobe master collection with the new lion?
I need to use Flash and illustratore, but apparently those programmes are incompatible with the new operative sistem...
I am a new mac users and I'd like to know if there are other similar programmes I can use with lion!

Lab79 wrote:
Are you on Apple's payroll?
well dude I can only let you know that as I work with those programme I don't have to pay for it is my company that pays the programme I whant to use( that's why I was asking if there where other programmes ..that I could use with lion insted that Illustrator and Flash!)..I know Adobe since 2005 and I can say that Adobs products are very good...I think that if it's an Adobe probleme or fault ..they will solve it very soon...but unfortunally I have the impression that after Jobs passed away Appel decided to change politics..and everything started to go very bad! (see FCP X)..
good luck with apple dude..
Where is the Apple problem? I have CS4 and CS5 running perfectly fine on my Macbook Pro. Installed 5 after Lion upgrade. Worth every cent. Adobe did have some catching up to do with Lion but with the CS5.5 update all runs fine. But not yours. So it is a problem with the Lion OS? You say you have been with Adobe since 2005. So you would be aware of all the other issues that Adobe had catching up with past Oss in Mac and Windows then. They get it right, but it is up to them. It is not up to Apple, nor Microsoft for that matter, to run around and check that every software developer in the world is running their business properly.
And what has politics got to do with anything. Some people just have to blame Software for their poor Hardware maintainence of failure of the same.
<The only think I can really do is to go back on my old windows...give back this orrible lap top and ask for my money back!>
Great suggestion. You should go with that one, but good luck getting a refund.
Bye

When is Firefox metro going to come to 32 bit windows 8? and can improve flash and html 5 performance!

When is Firefox metro going to come to 32 bit windows 8 and can you improve flash and html 5 performance it cant play 1080p videos smoothly I love Firefox but I'm using IE 10 for browsing and video, then Firefox for developing but want to use it for everything!

This article might answer your Windows 8 questions:
[[Does Firefox work on Windows 8 and Windows RT?]]
Link: https://support.mozilla.org/kb/does-firefox-work-windows-8-and-windows-rt?
As for performance issues in Firefox with Flash 1080p videos, Information about your graphics driver might help. See:
*[[Use the Troubleshooting Information page to help fix Firefox issues]]
This Adobe page might also be helpful (it recommends disabling hardware acceleration in Flash settings as a possible workaround):
*http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues

Advice on integrating Flash and HTML

I have googled and researched this topic on the web.
Integrating Flash and HTML seems like a popular topic but much of
the information is dated (using FS commands or solutions based on
2000-2004 coding and/or hacks) I am using Flash CS3 and Dreamweaver
CS3. I can use Actionscript 2 or Actionscript 3. Here is my goal
I want to use a Flash navigation in the top third of my page
and have it control and load new HTML pages in the bottom two
thirds of the page. Some of these html pages use SPRY code but most
are simple HTML pages. I prefer Flash over CSS because I have more
control and predictability. What I have found so far is three
different solutions.
1.HTML Framesets. This seems like a really good idea but I
thought using framesets was a fading technique and should be
avoided. Is this true?
2. Using the ExternalInterface class to communicate between
Javascript and Actionscript. This also seemed like a good idea but
it is not clear to me how to implement. Do I combine this with
innerHTML or some type of AJAX technique.
3. Keep everything in Flash and load different swfs into main
Flash page. I like this idea the best and it would work for most
pages but I still like html pages when there is alot of text or I
want to use SPRY techniques.
When I have posted elsewhere I get references to articles
telling me why Flash is bad or framesets are bad or innerHTML is
not standard HTML. The only thing I am sure about is that most
people are pretty passionate about defending their own way of doing
things. I am hoping someone can provide some solid information
about what is possible and how to implement a solution.

It works when you put it online... :)1

I use a Flexislider for my website [url removed] I want to use flash and make my website attracti

I use a Flexislider for my website [url removed] I want to use flash and make my website attractive. Any suggestions?

Will people be able to login to the FTP server from my website and do everything through their browser?
Users could use web based ftp client or a 3rd party ftp client.
Have look at the sytem the following school uses.
http://www.glenbard.net/Glenbard_DistrictHQ/Media/MOVs/Web-BasedFTPClient.html
Although I have not setup this type of thing up myself googling around shows a few tutorials using PHP or Java based ftp clients.
have a look at this article..

How do I use Qt and OpenGL with Visual Studio

Hi! I mainly want to program in C++ and I want to use Qt and OpenGL with Visual Studio.
I am currently revising C++ and later on i am going to start reading Qt and OpenGL. I have a background of
Embedded firmware design(C and Assembly).
The Visual Studio Version I have is 2013 ultimate. How do I use Qt and OpenGL with Visual Studio?
Thanks
Alexandros

Hi ClassicalGuitar,
The forum supports VS setup and installation. And your issue is not about the forum. I will move the thread to off-topic forum. Thanks for your understanding.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

Using ConnBean and CursorBean with a Data Source

Hi all,
I',m making a web app. using the Jdev (RUP4) with OA Extension. I looked in the help menu under "About Data-Access JavaBeans and Tags". Here I found the following example, but for some stange reason I cannot get the setProperty to work.
Example: Using ConnBean and CursorBean with a Data Source This following is a sample JSP page that uses ConnBean with a data source to open a connection, then uses CursorBean to execute a query.
<%@ page import="java.sql.*, oracle.jsp.dbutil.*" %>
<jsp:useBean id="cbean" class="oracle.jsp.dbutil.ConnBean" scope="session">
<jsp:setProperty name="cbean" property="dataSource"
value="<%=request.getParameter("datasource")%>"/>
</jsp:useBean>
<% try {
cbean.connect();
String sql="SELECT ename, sal FROM scott.emp ORDER BY ename";
CursorBean cb = cbean.getCursorBean (CursorBean.PREP_STMT, sql);
out.println(cb.getResultAsHTMLTable());
cb.close();
cbean.close();
} catch (SQLException e) {
out.println("" + "There was an error doing the query:");
out.println("<PRE>" + e + "</PRE>\n"); }
%>
Does anyone know how to set the "Property" to a datasource and make it work?
Best regards,
MHCI

There is no point-and-click (Import Data Source Metadata) way to use an LDAP server as a datasource. You have to use the Java Function provided on dev2dev. If you need help with it, please post here.
- Mike

Configure CRS2008 to using AD and Kerberos with Java application servers.

Hi All,
I have configure CRS2008 to using AD and Kerberos with Java application servers. Domain Controller is installed on W2K3 Server. In addition, CRS2008 is installed on another W2k3 Server.
I have create service account in domain controller: CMSACC
I have create two user account: CRuser1 and CRuser2
I have create domain group: CRSGroup
After I had run the setspn in domain controller,I got the message at below:
Registered ServicePrincipalNames for CN=CMSACC, OU=TEST, DC=BD, DC=com:
 BOBJCentralMS/BDMGTSRV.BD.com
CMC Setting:
AD Administration Name: BD\administrator
Default AD Domain: BD.com
Add AD Group(Domain\Group): secWinAD:CN=CRSGroup,OU=TEST,D=BD,DC=com
Service principal name:BOBJCentralMS/CMSACCatBD.com
I have create a WINNT folder in root directory.Moreover and save bcsLognin.conf and Krb5.ini at here.
bscLogin.conf:
com.businessobjects.security.jgss.initiate {
com.sun.security.auth.module.Krb5LoginModule required;
krb5.ini:
[libdefaults]
default_realm = BD.com
dns_lookup_kdc = true
dns_lookup_realm = true
[realms]
forwardable = true
BD.com = {
default_domain = BD.com
kdc = BDMGTSRV.BD.com
I have tested the Kerberos,using kinit CMSACCatBD.com password, and got error message at below:
Exception: krb_error 41 Message stream modified (41) Message stream modified
KrbException: Message stream modified (41)
 at sun.security.krb5.KrbKdcRep.check(KrbKdcRep.java:53)
 at sun.security.krb5.KrbAsRep.<init>(KrbAsRep.java:96)
 at sun.security.krb5.KrbAsRep.getReply(KrbAsRep.java:486)
 at sun.security.krb5.KrbAsRep.getReply(KrbAsRep.java:444)
 at sun.security.krb5.internal.tools.Kinit.sendASRequest(Kinit.java:310)
 at sun.security.krb5.internal.tools.Kinit.<init>(Kinit.java:259)
 at sun.security.krb5.internal.tools.Kinit.main(Kinit.java:106)
My problem is failed to logon CMC and infoview and got error message at below:
Account Information Not Recognized: Active Directory Authentication failed to log you on. Please contact your system administrator to make sure you are a member of a valid mapped group and try again. If you are not a member of the default domain, enter your user name as UserNameatDNS_DomainName, and then try again.
Actually, I am sucessful to logon Business View manager with CRuser1. However, I fail to logon CMC and infoview and got the above error. Have you any suggestion to solve this problem?
Ken.

if you can logon with client tools then that should be an indication that the service account running the CMS IS working! Good news.
So the problem is likely with the java portion (krb5/bsclogin or java options)
If the files are in c:\winnt\ (if not copy them there) and perform c:\program files\business objects\javasdk\bin\kinit username
then enter and password/enter again
Probably get the same message. To note in your krb5.ini all domain info must be in CAPS (the .com appears to be in lower case)
kinit works with just the krb5.ini, java SDK and AD (removing BO config and the service account from the picture). Once that works if your java options are specified properly you should be able to login to CMC/infoview.
also 1 last point. Add udp_preference_limit = 1 to the krb5 lib defaults section
libdefaults
default_realm = BD.com
dns_lookup_kdc = true
dns_lookup_realm = true
udp_preference_limit = 1
Regards,
Tim

How to use audio and mic with multipoint server with out it crashing on you

how to use audio and mic with multipoint server with out it crashing on you when i use them to make calls thru my station (zero client) at the same time it crashes on me and i need to restart the multipoint is there a setting i may have mist that enable's
them to work at the same time and if posible can i use a non USB device

Look for "Single Sign-on Using Kerberos in Java" in google or on Sun's web site. Maybe this paper will help you.
Claude

How to use "start" and "duration" with HLS stream

Hi all,
is it possible to use "start" and "stop" with HLS stream like rtmp stream?
If yes, how?
thanks in advance.

Hi,
This is completely player side fucntionality you are asking for. However, I guess default player that comes on safari (iPad), quicktime has the player timeline with stop and start option. But if not, you can create your custom player using exposed api of AVPlayer. Check-out AVPlayer api's.
FMS, by nature of protocol will respect the request to get the data(in case of client-play-start) and will not automatically push the data to the client if not asked for by the client (as in case of client-play-stop).
Thanks

I use to use ichat and now with mountain lion i only have facetime. i try to keep in touch with my family thru the old ichat, will facetime work as easiely ? is it easy to connect with this app? thanks, gilbert

I use to use ichat and now with Mountain Lion I only have FaceTime, will this work as easy as ichat? I try to keep in touch with my son and his family, he has a Mac also. I have never tried to do a video chat with my new Mountain Lion. I have set-up FaceTime and thought I would throw the question out before we try and get together. Thanks, Gilbert

Ichat is now called Messages and is in your Applications folder.

Capture image with webcam using flash and sending it to the server

I have a need to use flash to capture an image and have that image uploaded to the server. I have seen some examples of code that uses flash to capture an image but it saves the file locally. We need that file to be sent to the server. We are using CF9.0 and I figure that once we are able to capture the image we could hand it off to ColdFusion to send to the server.
Has anyone done anything like that or know if it's possible?
Any help is apprecaited.
Thanks,
Mallory

It's not that hard...after you capture the image in Flash encode just send it via Remoting to a cfc as a bytearray or a bytearray encoded as Base64 string (and then decode it to binary in the CFC). I have had better luck with the latter way. You could also post the bytearray encoded as a Base64 string to a .cfm page as a form field.
For example in Action Script 3 you do something like this (assuming "frameBMD" is the BitmapData drawn from the video source):
var ba:ByteArray=com.adobe.images.PNGEncoder.encode(frameBMD);
var baAsString:String=com.dynamicflash.util.Base64.encodeByteArray(ba);
var saveImageResponder:Responder=new Responder(onSaveImageResult,onFault);
var rs=new NetConnection();
rs.objectEncoding=flash.net.ObjectEncoding.AMF3;
rs.connect("/flashservices/gateway");
rs.call("Headshot.saveImage",saveImageResponder,baAsString,1);
And your cfc would be something like this:
<cfcomponent displayName="Headshot" hint="Save a Headshot">
<cffunction name="saveImage" access="remote" output="false" returntype="string" roles="user">
<cfargument name="data" type="string" required="true" />
<cfargument name="user_id" type="numeric" required="no" default="1">
<cfset SavePathParent = ExpandPath("/data/users")>
<cfset SavePath = SavePathParent & "/user_" & arguments.user_id>
<cfif NOT DirectoryExists(SavePath)>
<cfdirectory action = "create" directory = "#SavePath#" mode="777">
</cfif>
<cfset theFilePath="#SavePath#/headshot_#arguments.user_id#.png">

<cffile action="write" file="#theFilePath#" output="#toBinary(arguments.data)#"/>
<cfset LOCAL.file_url="/data/users/user_#arguments.user_id#">
<cfreturn LOCAL.file_url/>
</cffunction>
</cfcomponent>
Anyway, that's the idea... hope that helps.

Firefox 11 beta is having issues loading Flash and HTML content, shows plain text instead of images

I'm not sure what is causing the problem but it has been happening since beta 10 and now its also in beta 11. Randomly when I load any web page the page is displayed in plain text leaving all the HTML or flash content blank. Yes I have the most recent version of flash installed along with Java just in case it was looking for that mess as well. Sometimes the pages load fine, and sometimes they don't, it's like playing lotto with the internet. The only fix I know of is to either keep refreshing the page and "hope" it catches it on the reload, or closing Firefox and running CCleaner. Some times FF will load some of the visual data and leave gaps but usually its just basic text mode. I'm at a loss as to whether the problem is from Firefox or my ISP being a douche, either way its annoying that Firefox is not showing internet pages like it used to.
Hate to see it happening but it looks like Firefox is on its way to being just another Internet Explorer clone (failure). Should have stayed with your original team, all the new folks you have hired are really mucking up the whole project and its goal of a free and open internet. Not to mention writing bad code and costing you money and more importantly the user base.
(Update, now it's not doing it go figure, but I'm sure it will do it again at some point, perhaps its not Firefox and something else, I'll keep my eye on it and try to report any findings)

If you use extensions (Tools > Add-ons > Extension) like Adblock Plus or NoScript or Flash Block that can block content then make sure that such extensions aren't blocking content.
Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Xml in flash and html

Hi
I'm creating a site that has a news page displaying xml
content in flash - i'm using this so it can be updated externally.
I need to create a second news page that the user is redirected to
if they do not have a flash plug-in - this will be a html page. Is
it possible that the same xml files are imported into this page and
formatted with the same css so i don't have to create and update
two files ? or am I going about this the wrong way ?
ta

You can use JavaScript or PHP/ASP/JSP/ColdFusion (ie most
server side scripting languages). A server side script is usually
better as it doesn't rely on the client having JavaScript, but you
are probably using JavaScript for Flash detection anyway. I would
still recommend using a server side script, if you can on your
hosting server.
If you have Dreamweaver and you decide to use server side
scripting - it will do all of the scripting for you!
James

Using Flash and HTML with Sound

Similar Messages

Maybe you are looking for