Using HR data in R/3 to create business partners in Solution Manager

Is it OK for me to setup Solution Manager to automatically download HR data from R/3 to create the Business Partners (employee role) in Solution Manager?
We have setup SAP CRM 4.0 to automatically download the HR data and create Business Partners (employee role) in CRM. Since Solution Manager has the CRM component in it, I assume we can do it as well in Solution Manager.
Regards,
Mel Calucin
Bentley Systems

We did it, i don't see the problem...

Similar Messages

Error while creating Business Partner in Collections Management

Hello All,
I am trying to create Business partners for Customers in Collections Managment, specific to country Luxemburg. The error I am getting says that, 'Tax number category LU2 does not exist' and 'There is no BAPI field to screen field assignment'.
I have checked V_TFKTAXNUMTYPE table and LU2 is not defined there.
Appreciate if some one can help to locate where the system is picking up 'LU2' from, and help me fix this issue.
Thanks in advance,
Madhavi.
Edited by: Madhavi99 on Nov 19, 2010 3:52 PM

Krishna,
Using T-code SM30, check the table V_TFKTAXNUMTYPE, and you probably will not see an entry with CA0 in the table. This should be added here in this table (I am not sure how, may be it is a patch sent by SAP or an OSS note..We opened an OSS note and will let you know when I hear from SAP).
With out adding CA0 in the above mentioned table, you might be using the field for VAT registration field while creating BP master data. I figured out from the way we were trying to create BP, Country code (for example CA in your case) 0 ie., CA0, is for the VAT registration number, Country code1 (for example CA1) is for tax number 1, and CA2 is for tax number 2 fields.
After the above mentioned table is updated, using BP tcode, this code 'CA0' should be assigend to the business partner number that you are trying to create under identification tab.
I hope, I made it as clear and understandable as possible. But, if you have any quesitons, please let me know.
Regards,
Madhavi.

How to create Business Partners (in Person category) from Customer Accounts

Hi all
In ECC 6.0, I am creating Business Partners (Master Tenant w Customer Account) from 'employee' Customer Accounts and the system is defaulting to the 'Organization' category.
Does anyone know how to configure it so that Business Partners are created in the 'Persons' category when FLBPD1 is executed?
Thanks in advance.
Dion
Edited by: Dion Ng on Jan 20, 2009 8:05 AM

Hi Dion,
Now I understand your issue.
The system uses BadI CVI_MAP_BP_CATEGORY to determine with which category the bp will be created.
This Badi check with which Title (TITLE_MEDI) the customer is created and according to the definitions made in table TSAD3 - Forms of Address (Key) (Business Address Services) (SPRO / Flexible Real Estate Management (RE-FX) / Business Partner / General Settings for Business Partner / Business Partner / Basic Settings / Forms of Address / Maintain Forms of Address ) the system creates the bp with the specific category. This is standard!
If this is not enough for you please let us know.
Regards,
DAS

Create Support Messages in Solution Manager

Hello,
Can you please tell me the basic and easy steps for creating Support Messages in Solution manager.
I am using Following link for the same.
http://help.sap.com/saphelp_sm32/helpdata/en/29/fc811d62c24906b71f395ec8558cd7/content.htm
but i am not able to understand the steps from No. 4. When i click on "New" button i gor an error saying that "Exception condition "CUSTOMIZING_MISSING" raised."
Please guide.
I think the version of the Solution manager on which i m working is different from that of the version for which is documentation is prepared.
Thanks in advance,
Prashant

Hello Prashanth,
You, the Solution Manager version could be different than the version which help.sap.com describes. However, may I know which user and its authorizations you are using to create Support Message? Because, authorizations plays most important role.
Please go through the following links.
SAP Solution Manager Roles
http://help.sap.com/saphelp_sm40/helpdata/en/f9/35023b6b33162ee10000000a11402f/content.htm
First steps to work with Change Request Management scenario
First steps to work with Change Request Management scenario in SAP Solution Manager 7.0
Managing Changes with the SAP Solution Manager
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5d29d690-0201-0010-2f9f-a0f957dee385
Hope the above info is helpful.
Regards,
Satish.

Can we create a workflow in Solution Manager ?

Hi Friends,
Actually I have a requirement to create a workflow in solution manager.
The requirement is to create a wf for issue log. As soon as a new <b>issue (support message)</b> is created then the wf should get triggered and send out a mail to the resp. person. It just a sending a mail between issue created and responsible person. Can anyone please let me know if we create a wf in Solman or not ? <b>If so please provide me some related buss. obj for that.</b> thanks
Grateful to your help.
Srithan

If you want to Place certain actions after status change of a transaction, it's better to do this with an action profile and a condition for that action:
In Solman check SPRO path:
CRM>Transactions>Basic settings-->Define transaction types
In this activity double click the transaction type to find out what the action profile is:
Now go to:
CRM>Basic functions>Actions>Actions in transactions>Change actions and conditions-->Define action profiles and actions
Here you can add an action definition on the action profile, this can be methods, workflow or in your case a smartform mail.
If the action profile is a SAP standard (doesn't begin with Z) it is advisable to copy the standard. Also, this is more of a CRM/Solman consultant issue, so you may have to involve such a consultant
Now go to
CRM>Basic functions>Actions>Actions in transactions>Change actions and conditions-->Define Conditions
Here you can add conditions which will cause the action to be executed.
Kind regards, Rob Dielemans

Can we create a workflow in Solution Manager for Tester Worklist ?

Hi Friends,
Actually I have a requirement to create a workflow in solution manager.
The requirement is to create a workflow for issue log(tester worklist). As soon as a new issue (support message) is created then the wf should get triggered and send out a mail to the resp. person. It just a sending a mail between issue creater and responsible person.
Can anyone please let me know if we create a wf in Solman or not ? If so please provide me some related buss. obj for that. thanks
Is there any standard workflow (or similar to that) to make it automatic ? Once the message is created then a mail to the responsible person should go.
Grateful to your help.
Srithan

Sorry Raguraman,
I am unable to check those tcodes as I havenot got the authorizations for those. after several mails I got some basic wf developer tcode access. I am not sure whether I have to create a new workflow for this or I can go with some built-in technology to send mail when a new message (tcode: stwb_work) is created.
can raguraman or anyone please help me on doing this ?
if the solman has provided the standard for sending mails when a new message is created/changed to the responsible person.
grateful for your help
Regards,
srithan

Error in creating Java Users during Solution Manager installation

Hi gurus,
First time trying to install SAP.
Red Hat Linux 4
Oracle
jdk 1.4.2_11
While installing the Solution Manager, it errored when it was creating Java Users, SAPJSF, J2EE_ADMIN and J2EE_GUEST.
The error description read "jco$exception: rfc_error_system_failure: invalid request".
I want to create these users manually and continue with the rest of process.
I searched lots of entries, notes, etc., but somehow, my "old" pair of eyes (and brains, too) failed to come up with something I could understand.
So, gurus, please help, help, help!!
There are no GUI version of anything installed, no Virtual Admin, no nothing like that. I have to rely on good old unix (Linux) command to do (add users) this.
Can you please, please post the instructions (step-by-step)? Please have a pity on me since this is my very first time dealing with SAP.
Thanks and regards.

Creating users manually is not the intension of the SAP Installation tool. There are other solutions available
A good starting point is to check if SELinux is enabled or disabled. I've seen lots of broken installations on Red Hat because SELinux does not allow the installer to create users. Check if in /etc/selinux/config the setting
SELINUX=disabled
is set.
I see, that you are using JDK 1.4.2_11. Is this the Sun JDK? In case you are on x86_64 you have to use the IBM JDK instead. You can download it from <a href="https://www14.software.ibm.com/webapp/iwm/web/reg/download.do?source=lxdk&S_PKG=amd64142sr7&S_TACT=105AGX05&S_CMP=JDK&lang=en_US&cp=UTF-">here</a> .
Also a new SAPINST may help. The current Installation Master CD can you download here:
http.//service.sap.com/swdc
-> Download
-> Installations and Upgrades
-> Entry by Application Group
-> SAP Technology Components
-> SAP SOLUTION MANAGER
-> SAP SOLUTION MANAGER 3.2/4.0
-> Installation and Upgrade
-> LINUX
-> ORACLE
51032006 SAP Solution M. 4.0 SR1 Inst. Master **
Best Regards,
Hannes Kuehnemund

How to create System component in solution manager

Dear Experts,
How to Add a new (Custom) system component in solution manager which is used for service desk and also how to replicate the same component while creating support message (i.e., in F4-help for component filed).
Thanks in Advance.
Thanks and Regards,
*bold* Thirukumaran. R *bold*

check this blog:
/people/dolores.correa/blog/2007/10/06/service-desk-solution-database
basically it is at:
IMG under SAP Solution Manager -> Configuration -> Scenario-Specific settings -> Service Desk -> Solution Database
Nesimi

Create new client in Solution Manager?

I finished installing Solution Manager 4.0 sp1 for the first time and have the default clients of 000, 001, and 066. I can log on with the SAP* user. I'm a little confused about the next step. Do I create an addtional client (For example, 100) just like a production or development system to use for users, RFC connections, etc.?
Or do I use one of the default clients?

Hi Carl,
As always... the golden rule applies to SOLMAN as well. Never touch the default clients. Have a client copy and then perfrom all the actions from and ON the Copied client. Get going with SCC4 for a new SOLMAN client :).. atleast thats what we follow here as a practice.
All thebest
Br,
Sri
Award points for helpful answers

Geocode Error while creating Business Partner in Audit Management

Hi All,
When I try to create business partner in PLMD_AUDIT and assign it to various partner roles like Auditor, Responsible person etc. I am getting error as " Geocoder SAP0: Country specification is (Customizing) " What should be done to avoid this error?
Found details in spro:
For "SAP0 Geocoder" there is no function module and destination assigned, Is it the cause of error? If it is the case then what should be assigned and Let me know the standard function module.
Regards,
Ram.

hi Keerthi,
553073 is the sap note for geocode error in country specification.
Regards,
Ram.
Edited by: Ramachandran Jayaraman on Jun 9, 2008 3:18 PM

Interactive Report uses XML data saved in database for creating PDF files?

Hello all,
I installed Apache FOP to allow a PDF "Download" in the Interactive Reports.
Correct me if i'm wrong, when a PDF file is created with the Interactive Report option "Download", it uses a XML data to make it. Right ??
I would like know where in the database is this XML code located.
Regards Pedro.

After some searching i found that XML its stored as a BLOB and it is used as XML based report data and RTF or XSL-FO based report layout.
I didn't find yet where is located the XML used by Interactive Reports. If someone knows where in the APEX database is the XML located please share.
Regards Pedro.

Using LV 8.6 to access database created in MS SQL Server Management Studio

I am using Labview 8.6 to access a database created in MS SQL Server Mgmt Studio, using LabSQL ADO utilities. I don't have LV's add-on DB connectivity toolkit, but just the ADO utilities. Can i do it? If yes, how? I have no experience whatsoever in connecting and accessing data from a DB. An example would help.
Thanks,

Szi wrote:
As for my opinion you cant access without DB connectivity toolkit.
Nonsense.
With LabSQL, you should first find an on-line SQL tutorial and refer to the Microsoft help files. I would recomend creating a UDL file. This is the connection string you use for the ADO Connection Open function. You might want to to get a little help from the db administrator. You'll certainly need help in getting a login and password.
There are examples that come with LabSQL

Strange error creating Business Partners

Hello , I'm having this message when adding customers with fathercards:
"Cannot concentrate summary cards [OCRD.FatherCard]"
Does anyone know what can be wrong?

Nevermind, it's because the father card has also a father card.

Use by Date Items

Hi
We have several items with a u201Cuse byu201D date.
Is there any possibility to enter this information in the stock data, so that we know when the material will be out of date?
Thank you.
Regards.
MB

Hi Matthew ,
As per you scenario i must tell you that there is no such way to enter the information with stock , you can add information to the Item .
The only thing which is attached with the Stock and items are their Serial Numbers . so you can add some field there and add the ' use by date ' in that particular field .
By which you can manage the Item with your required infornation along with the serial numbers .
Thanks
Ashish

How to create business partner

Hi All,
I am working on a requirement where I need to create Business partners for employees that have a role as an AP vendor as this will allow personal data (address/bank info) to be shared across applications. So can you please tell me how can I do this and if you can pass on any documentation on this that will be very helpful.
Thanks,
Raj

Hi use BAPI mentioned below :
BAPI_BUPA_CREATE_FROM_DATA
Please got through the documentation of the Fm in SE37 tcode... IT will help you about the required fields.
also call bapi bapi_transaction_commit
kanishak

Using HR data in R/3 to create business partners in Solution Manager

Similar Messages

Maybe you are looking for