Using HTTPS with HTTPIWA2 Adapter or HTTP Adapter

Original post by Patti Richards - Dominion Res...
10:44am, May 19
The manual says that HTTPS protocol is supported, but I can't seem to find any more information than that. Has anyone set up their HTTP or HTTPIWA2 Adapter/Agent to have secure HTTPS traffic? Did you have to configure the sslconfig.properties on the application server? Any info would be appreciated. We got the unsecure web service calls working, but may have to change to HTTPS.

Sanjeevan P
5:33am, May 20
A SSL certificate from the application you are connecting to is required. That SSL certificate needs to be loaded into the ServiceLink JVM keystore file using the Java provided 'keytool' utility. Once the right type of SSL certificate (sometimes you need a signed root certificate) has been registered using keytool and ServiceLink restarted, the HTTPS connection should be established.
Patti Richards - Dominion Res...
6:02am, May 21
Thanks! I have a couple of more questions...
1) Do you have to do anything with the sslconfig.properties in the D:\newScale2008.3\jboss-4.2.3.GA\server\ServiceLink\deploy\ISEE.war\WEB-INF\classes directory or does the "keytool" utility take care of that?
2)Did you set up a different port number?
That SSL certificate needs to be loaded into the ServiceLink JVM keystore file using the Java provided 'keytool' utility.
Once the right type of SSL certificate (sometimes you need a signed root certificate) has been registered using keytool and ServiceLink restarted, the HTTPS connection should be established.That SSL certificate needs to be loaded into the ServiceLink JVM keystore file using the Java provided 'keytool' utility.Once the right type of SSL certificate (sometimes you need a signed root certificate) has been registered using keytool and ServiceLink restarted, the HTTPS connection should be establis

Similar Messages

Using Netbeans with Axis 1 shows HTTP Version Not Supported

Hello,
I need to use Axis 1 with Netbeans. So i have integrated Axis 1 in build.xml file to use axis ant targets. If i am executing the deploy target:
    <target name="AdminClientDeploy" description="adminClient" depends="validate">
        <java classname="org.apache.axis.client.AdminClient" fork="yes"
              dir="." classpathref="${classpath_id}">
            <classpath>
                <pathelement location="${build.classes}" />
            </classpath>
            <arg value="-l ${service.url}/servlet/AxisServlet"/>
            <arg value="${basedir}\src\${service.java.path}\deploy.wsdd" />
        </java>
    </target>It shows
running Apache Axis Admin client
Processing file D:\\Axis1WS\src\java\axis1\deploy.wsdd
Exception: AxisFault
faultCode: {http://xml.apache.org/axis/}HTTP
faultSubcode:
faultString: (505)HTTP Version Not Supported
faultActor:
faultNode:
faultDetail:
        {}:return code: 505
        {http://xml.apache.org/axis/}HttpErrorCode:505
Java Result: 1
BUILD SUCCESSFUL (total time: 1 second)I have no idea whats the problem, but i think it's a configuration problem with netbeans. The compilation itself shows no problem. Please let me know, if you have some experience and especially if you know this problem.
Thanks
Alex

Hello, problem is because of following part:

in the tutorial, there is a space in URL, when you remove this space, problem disappear;
<property name="service.url" value="http://localhost:8084/${ant.project.name}"/>

How to Use Gmail With Apple's Mail?

Answer:
Now Itis not a Problem, Please go to this link and know how to solve this problem, Ihave configuir this in my mac pro. Have enjoy.
http://picturemuseum.blogspot.com/2011/08/how-to-use-gmail-with-apple-mail.html
http://mobilesuggestion.blogspot.com/2011/08/how-to-use-gmail-with-apples-mail.h tml

I notice that it's possible to have sticky posts in these forums. See
http://forum.java.sun.com/forum.jspa?forumID=534
the Concurrency forum for an example. Posting a link to the FAQ in a sticky post might reduce the number of FAQs asked here by maybe 1%? Or posts like this one might do well as a sticky?

Using url with username and password in URL class

Hi,
I'm writting an applet in which I use getAppletContext().showDocument with an URL.
The problem is that I'm using URLs with username and password (http://user:[email protected]/page) and it isn't working because the browser is getting the URL http://user/page.
Is this a bug in the URL class? Or in the showDocument method?
Is there any way to make this work?
Thanks for any help,
Pedro Prospero Luis ([email protected])

I'm not sure whether this is supported behaviour. I've had this syntax fail to work in the Netscape address bar so I can't recommend it as an approach for authentication.
If you want to authenticate the user before redirecting to the page, though, you could try creating a connection to another page on the same server and sending the authorization information then. Your browser may then be successfully authenticated.
See http://www.javaworld.com/javatips/jw-javatip47.html for information on this.
You might not need to read back the page from the server, just connect to it. Might work.

Tips on using Aperture with Photoshop PSD files

For all the people like me coming to Aperture with hundreds of Photoshop files, I would like to offer what I've learned so far in this area.
1. If Aperture is importing your psd files but not showing an image, you probably need to change some preferences in PS. Apple has a tech note showing how to set the PS prefs here: http://docs.info.apple.com/article.html?artnum=302624
Warning: all of the choices should be set to the ones onscreen, not just "maximize compatibility". And even then, I have found I can't simply re-save the file to produce the image Aperture needs. I had to use "Save As" from Photoshop, creating a new file, to import a visible image file into Aperture.
2. Once the psd file is in Aperture, you need to realize that Aperture treats it as a master and won't let you make further changes to it. So, if you select this psd file and choose "Edit in external editor," Aperture will create a duplicate file and send that to Photoshop, thus protecting you. If you don't want two full-size masters of the same image in your library, there are two work-arounds.
Very Important Tip: in the Aperture preferences you must tell Aperture to use the psd file format for the "Edit In External Editor" command. My copy of Aperture defaulted to the TIFF format, which is bad if you want your layers preserved as you should.
One work-around is to import the psd file(s) as referenced masters. When you want to make changes to the file in PS, choose the file in Aperture and select "Show in Finder." From the finder, open the file in PS, make your changes, save, return to Aperture and update the preview if Aperture hasn't automatically done so. I don't like this method because it requires referenced masters and I want all of my files managed by Aperture.
Second method works with managed masters in the Aperture library or referenced masters for that matter. However you cannot use this technique if a psd file in your Aperture library has versions you want to save. You can only do this with files that have not spawned versions which you want to keep. In other words, be very careful. Best to do this as shortly after the import process.
Pick the file, choose "Edit in External Editor." Aperture duplicates the file and opens that in PS. Make some changes, save and return to Aperture. Notice the original master and this new changed version are in a stack. There should be a badge on the changed version indicating it has been edited externally. Here's the trick: Unstack the two images and delete the original master. Now you have only the externally edited master in your Aperture library. If you choose "Edit In External Editor" with this file, Aperture will not duplicate it and send the duplicate to PS, it will send the selected file.
Apple has a useful FAQ on using "Open With External Editor" here: http://docs.info.apple.com/article.html?artnum=302820

My suspicion is that Aperture is going to try loading the video card VRAM with your image .... 600Mb worth. So, paging in/out of system memory is going to be a royal pain.
Check that you haven't any alpha channels saved, as Aperture will save them but will not composite them.
Finally, to disable previews, uncheck in preferences, AND also uncheck Maintain previews under the library projects list gear icon.
Cheers!

Javascript error on - Help - Learn how to use Numbers with this online...

I am trying to find out more about Numbers. I am using iTunes 9.1.1 on a Vista PC. I get a Javascript error in Internet Explorer 8 when I try to access:
Help - Learn how to use Numbers with this online resource.
http://help.apple.com/numbers/1.0
The link redirects to the following page:
http://help.apple.com/iwork/safari/interface/#tan727163ed
The above page is blank except for boxes for Keynote Help, Pages Help, Numbers help, and a blank input field that seems to do nothing. Here is the Javascript error message from Internet Explorer 8:
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30729)
Timestamp: Tue, 1 Jun 2010 20:55:54 UTC
Message: This command is not supported.
Line: 1
Char: 41589
Code: 0
URI: http://help.apple.com/iwork/safari/interface/javascript.js

Link also does not work for me in WIN 7 with IE8. However, it does work in Chrome in WIN 7. It also works in Safari on my G4. Suggest you try Chrome or it may work in another browser like FireFox or Safari in Vista.

How to use HTTPS with sender SOAP Adapter

Hi,
I am implementing a synchronous SOAP- proxy scenario and on the sender communication channel I have to use the Http Security Level as "HTTPS with client Authentication".
Where from I get the certificates to be used in sender Agreement.
Please give me a step by step approach to achieve this.
Regards,
Nitin

Nitin,
Kindly go through the below links ...
http://help.sap.com/saphelp_nw04/helpdata/en/1f/7e2441509fa831e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/14/ef2940cbf2195de10000000a1550b0/frameset.htm
Also, make a search on the SDN as this question has been answered many a times on the forum.
Regards,
Neetesh

WSRM Adapter replaced with soap in PO7.4. Getting error "Response message contains an errorXIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error"

Hello All,
We have scenario proxy->pi->webservice. In older versions of PI system they used wsrm adapter at receiver side and it's working fine.
Receiver interface is asynchronous. So no response structute is present and receiver service is business component(since receiver is a third party).
During migration, we have replaced the receiver adapter with SOAP adapter and used message protocol as SOAP 1.1 but the message is failing and in communication channel it is showing error "Response message contains an errorXIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error". In this case the receiver interface is stateless xi 3.0 compatible(re using the old), after changing it to just stateless also issue persists.
In target url field if i prefix the url with "http" then above mentioned error is occurring otherwise if i use the hostname:port/path.. then it is giving error
"soap: Call failed: com.sap.aii.af.sdk.xi.srt.BubbleException: Unsupported protocol". So maintaing the url as http://hostname:port/pat.....
As in old channel wsrm channel there is no userid and password, i haven't given any userid/pwd in receiver channel.
used the bean sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean with parameters
Module Key = soap
Parameter Name = noSOAPMakeSysErrFromResponseFault
Parameter Value = false
and
xmbws.No SOAPIgnoreStatus = true
but not successful.
Please help me. I got stcuk here.

Hello Jannus,
The connectivity is working fine. Network team has confirmed it. I doubt that any strucutre(header) difference might be present in message when sending with wsrm adapter compared to sending with soap adapter.
Please let me know the exact difference between soap and wsrm functionality in receiving end.
By considering the structure issue, i have checked the "do not use soap envelope" check box, then i got error "Response message contains an errorXIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 415 Unsupported Media Type"
Then i used message transform bean, but not successful.
Regards,
Ch.Venkat.

Enabling HTTPS with Client Authentication for Sender SOAP Adapter on PI7.1

Hello All,
We are currently building up a HTTPS message exchange with an external client.
Our PI 7.1 recieved over HTTPS messages on an already configured Sender SOAP Adapter.
The HTTPS (SSL) connectivity works fine and was completely configured on the ABAP Stack at Trust Manager (TC=STRUSTSSO2)
Login to Message Servlet "com.sap.aii.adapter.soap.web.MessageServlet is required and works fine with user ID and password.
Now we have to configure the addtional Client Authentication.
At SOAP Adapter (Sender Communication Channel) under "HTTP Security Level"you are able to configure "HTTPS with Client Authentication".
But what are the next steps to get this scenario successfully in place?
Many thanks in advance!
Jochen

Hi Colleagues,
following Steps still have to be done:
- Mapping public key to technical user at Java Stack
As preparation you have to activate value "ume.logon.allow.cert" with true under "com.sap.security.core.ume.service" under Config Tool. At NWA under Identity Management at for repecively technical user the public key certificate
- Be sure CA root certivicate at Database under STRUSTSSO2
- Import intermediate Certificate under Certificate List at Trast Manager for the Respecive Server Note
- use Login Module "client_cert" which you have to configure under NWA\Configuration Management\Authentication for Components "sap.com/com.sap.aii.adapter.soap.app*XISOAPAdapter".
Many thanks to all for support!
Regards,
Jochen

Error using Sender SOAP adapter over HTTPS

Hi experts,
Few weeks ago, i developed an interface as follows: SOAP <-> XI <-> RFC.
I tested the functionality using Altova and everything went well, with HTTP.
However, when i use HTTPS it fails throwing these error messages (pop ups):
<i>"HTTP error: could not post file"......
"Error sending the soap data"</i>
I have reviewed the SSL certificates installation and everything seems to be ok, but currently i am stuck and do not know how to fix this.
I have also change the ID comm channel from HTTP to HTTPS with client aut.
Is there any special service i have to activate? (XI services and SPIGATE are already done)
Could you please assist?
Thanks in advance and best regards,
David

David,
have a look @ these threads...u may get some help!!!
Sender Soap with HTTPS
https Soap Adapter
Regards
Biplab

HTTPS with Client Authentication in SOAP sender Adapter

Hi All,
In SOAP Sender communication channel. When I generate WSDL with HTTP Security Level = HTTP: it works when third party tries to send data to XIwebservice.
But when I tried with HTTPS with Client Authentication option its giving error
InfoPath either cannot connect to the data source, the service has timed out, or the server has an invalid certificate.
Please guide how to use HTTPS with Client Authentication option, and what all configuration need to apply in XI & in third party to use this.
Regards

Rohan,
With spy you can trace the entire route, since you are using client authentication using certificate, it would be a better option to verify with the certificate.
You also have the option of using a username/pwd combo though that is not advocated as it lowers security levels and is permeable to passive sniffing.
So the answer to your question is yes, after importing the certificate with sender and third party reciever a test would reveal the complete scenario along with any issues that you could encounter..
Regards
Ravi Raman

HTTPS with SOAP adapter

Hi
Can someone clarify something for me:
HTTP with SSL without client authentication -> Is the information still encrypted the same way as with certificates? Do I need to set up something on the SAP/XI side when not using certificates?
If information still is encrypted, why are we using HTTPS with client authentication (certificates). What is the advantage of using certificates compared to user authentication?
Thanks. Your're the best!
regards Marianne

Hi,
HTTP with SSL without client authentication -> Is the information still encrypted the same way as with certificates? Do I need to set up something on the SAP/XI side when not using certificates?
-->Encryption is differnt from Certificates, Encryption is done to the data that we are passing and Certificates are used for authentication to particular server,so there is no point that information will be encrypted while using certificates. so even we use certifacates we need to encrypt the data.
If information still is encrypted, why are we using HTTPS with client authentication (certificates).
-->we use HTTPS/SOAP for secure data transfer, client authentication is same for HTTP,HTTPS or SOAP.
What is the advantage of using certificates compared to user authentication?
--->Traditionally, users receive access to resources from an application or system based on their user name and password. You can further augment system security by using digital certificates (instead of user names and passwords) to authenticate and authorize sessions between many server applications and users. Also, you can use Digital Certificate Manager (DCM) to associate a user's certificate with that user's iSeries user profile. The certificate then has the same authorizations and permissions as the associated profile.
A digital certificate acts as an electronic credential and verifies that the person presenting it is truly who she claims to be. In this respect, a certificate is similar to a passport. Both establish an individual's identity, contain a unique number for identification purposes, and have a recognizable issuing authority that verifies the credential as authentic. In the case of a certificate, a Certificate Authority (CA) functions as the trusted, third party that issues the certificate and verifies it as an authentic credential.
For authentication purposes, certificates make use of a public key and a related private key. The issuing CA binds these keys, along with other information about the certificate owner, to the certificate itself for identification purposes.
Regards,
Chirumamilla.sukarna

ADAPTER.HTTP_EXCEPTION - HTTP 415 Unsupported Media Type

Hi All,
We have a Proxy to SOAP scenario which is throwing the below response.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 415 Unsupported Media Type</SAP:AdditionalText>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
We have used XSLT mapping and also used the Message transform bean (ocalejbs/AF_Modules/MessageTransformBean) with the module parameters.
Please help.

this is the Audit log... Just in case this helps..
20.10.2011 09:57:34 Information Transform: successfully transformed
20.10.2011 09:57:34 Information MP: processing local module localejbs/sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean
20.10.2011 09:57:34 Information SOAP: request message entering the adapter with user J2EE_GUEST
20.10.2011 09:57:34 Information SOAP: completed the processing
20.10.2011 09:57:34 Information SOAP: continuing to response message 765df5dd-fb23-11e0-a52b-0000124b6826
20.10.2011 09:57:34 Error SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error
20.10.2011 09:57:34 Error MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error
20.10.2011 09:57:34 Error Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error
20.10.2011 09:57:34 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error. Setting message to status failed.
20.10.2011 09:57:34 Error The message status was set to FAIL.

ADAPTER.HTTP_EXCEPTION, HTTP 500 Internal Server Error, in Receiver soap A

Greetings All,
In my scenario i am calling external service of SFDC using receiver soap adapter but i am facing below error in the response.
ADAPTER.HTTP_EXCEPTION, HTTP 500 Internal Server Error
I am creating the soap structure/envelope using Java mapping since need to add additional parameter in soap header.
I am setting the URL in java UDF using parameter TServerLocation.
In comm channel checked "do not use soap envlope" also set the format to text/xml using MessageTransformBean.
The service was working fine when tested in SoapUI tool.
Looking forword for your help and will be appreciated.
Thanks,
Sandip

Hello Sandip, I hope you are doing fine!
I`m not sure if you are using a sync or async scenario...
The behavior that you describe is the expected behavior for SOAP receiver adapter in nosoap mode, asynchronous case.
The explanation that lies behind it is that in nosoap mode the bahavior is just similar to pure HTTP communication. An HTTP 4/5 error received from the target server is treated as HTTP internal error and logged into AFW as an error. The message in an asynchronous scenario without acknowledgements is normally seen as successful on IE side as it is successfully sent to the target system. It can be even successfully consumed by the target webservice, but for amo other reason, the HTTP request from SAP PI to the target system returns HTTP 500 error.
If you ask for system delivery acknowledgements, you should get a non-successful delivery acknowledgement.
In synchrnous scenarios, when a response is expected, the behavior is different.
If this is a sync scenario, there is an official patch released on the service marketplace. SAP Note 1533195 is released.
In addition to deploying the patch, apply the additional configuration steps. As per this note, for the default module
sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean
you will need to set:
Module Key = soap
Parameter Name = noSOAPMakeSysErrFromResponseFault
Parameter Value = false
If you need to bypass the HTTP errors in the communication with the target system, you need to apply note 1055678.
To apply it, just add for the default module
sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean in your receiver
channel, Modules tab the following:
Module Key = soap
Parameter Name = XMBWS.NoSOAPIgnoreStatusCode
Parameter Value = false
If you need any SOAP fault related behavior or any other SOAP related feature, you should setup the channel to run normal SOAP mode, since as already mentioned nosoap mode is used now.
In addition, check note:
856597 - FAQ: XI 3.0 / PI 7.0 / PI 7.1 SOAP Adapter
section "1. Sender Connection"
Q: I get a server error "500 Internal Servler Error" from the
adapter's servlet. What went wrong?
and get the trace to give you more details of the error.
One more thing, VERY IMPORTANT.
I STRONLGY recommend you to update all XI-PI components to latest patch available in the Service Marketplace. Thery are:
XITOOLS, XIESR, XIAF, XIAFC, MESSAGING, XIGUI. Some of them might not be present depending on the release of you system. e.g: 3.0, 7.0, 7.1
I hope this helps you.
Cheers
Jorge Eidelwein

XI - Call Adapter Error - HTTP client. Code 402 reason ICM_HTTP_TIMEOUT

I am using HTTP adapter to post XML PO to vendor's site. We are having this problem with one of our vendor when PO's has more than 15 line items. XI server is getting error-"Call Adapter Error - HTTP client. Code 402 reason ICM_HTTP_TIMEOUT". Actually PO is posted good for the first time on vendor's site but XI is getting above error message and it keeps posting it again. Is there anyway to stop it otherthan manually stopping the XI message? Is there anyway to increase the wait time of the XI server to get the message.
Thanks in advance.
Mrudula Patel

I'm getting the same issue "500 TIMEOUT error" in runtime work bench-->IE--->Test Message. When i manually trigger the file.
The issue is basically from 01-01-2015 02:00 pm to 02-01-2015 01:am , File is picked from source ftp folder and places in archive but xml messages are not reflecting in SXMB_MONI.
Today suddenly after 01:00 am messages are successfully processing.
Please help on this issue. Many Thanks.

Using HTTPS with HTTPIWA2 Adapter or HTTP Adapter

Similar Messages

Maybe you are looking for