Using IMAQ create, set-up, acquire and windraw to save image without color map

Hi,
Attached is my VI (using labview 8.5) and am not sure where it is getting the color info from, but it saves the image as jpeg/bmp/tiff with colormap (confirmed by imread in matlab). Can someone help me save these images without colormap info.
Thanks
Attachments:
HL Grab with two boards and SONY XC55_Images.vi ‏166 KB

Hi Maverick269,
I noticed that you posted this question over on the Machine Vision forums as well. That will definitely be a better place to get this question answered, so let's work on the issue over there :
http://forums.ni.com/t5/Machine-Vision/Using-IMAQ-create-set-up-acquire-and-windraw-to-save-image/m-...
In the future it helps us stay organized if we limit each issue to a single thread.
Cheers,
Andy C.
Applications Engineer
National Instruments

Similar Messages

I made a picture collage in pages from the pictures in iPhoto. You used to be able to print and then say save as a jpeg to iPhoto and that option is gone. How do you turn your document into a jpeg now.

I made a picture collage in pages from the pictures in iPhoto. You used to be able to print and then say save as a jpeg to iPhoto and that option is gone. How do you turn your document into a jpeg now?

If you chose print, you can save as PDF. If you open the saved PDF in preview, you can save as JPEG, GIF, PNG. FYI you can crop in preview.
Another option is you could use command + shift + 4 to do a screen shot of a specific part of of the screen.

Hello everyone, So When I use the eraser on a photo and try to save it as jpeg is makes is save it as a copy but the parts that I erased are replaced with a white background and thats not what I want

Hello everyone, So When I use the eraser on a photo and try to save it as jpeg is makes is save it as a copy but the parts that I erased are replaced with a white background and thats not what I want

That may not be what you want, but Jpeg images are flattened, without transparency. Every pixel has a color value, with the default background usually being white. If you want to crate an image that leaves the erased area transparent, you will need to use an image format such as .gif or .pnc.

I'm using CS5 extended on a Mac and can't save png's

I'm using CS5 extended on a Mac and can't save png's. The program stops responding and I have to force quit.

Thanks.
I am in RGB colour space, but when I try to save a PNG photoshop stops responding and I have to force quit.
I have found a way to save PNG's using Preview, but it is worrying that PS crashes on me.

Problems acquiring and saving multiple camera images using a switch with GigE cameras

Hi Folks,
We are having an issue with connecting 6 GigE cameras via an Ethernet switch. We can acquire and store individual cameras but once we increase the number of cameras we end up with jumpy avi files.
Each camera has been physically labelled and attached to the switch, so camera 1 is attached to port 1, which then corresponds to Cam1 in MAX. When recording multiple files what appears to happen is that the avi file from cam1 actually has images from multiple cameras, as if cam1 is being renamed/allocated on each frmae and each time a different camera is allocated. How can we fix this?
We are new to this so any help or advice would be much appreciated.
Thanks in advance,
Cathy
Attachments:
Camerad.png ‏60 KB
Camera.vi ‏91 KB

I think your problem is caused by using the same image name on each instance of Imaq create. "Grab and Save to AVI Acq" being the string you are using. I am pretty sure If you make each image name unique you wont get image referance problems.
Senior Software Engineer
www.Adansor.com

How to use cfdocument create a PDF file and save the file in server?

Hi,
I want to use cfdocument to create a PDF file and save it in
the server for other people to download,can you give me a idea how
to do this.Thanks.
<cfdocument format = "PDF" pagetype="A4"
orientation="portrait">
</cfdocument>
Mark

Hi
<cfdocument filename="" format = "PDF" pagetype="A4"
orientation="portrait">
</cfdocument>
Give the physical path to the filename. You have write
permission for this folder to create a PDF file.

Using JSP to set form data and automatically submit

I am using JSP to extract the authentication details form the header, and then set these values and automatically submit them them to a javascript cookie function. I can extract the information, but setting and submitting to javascript seems to be a problem. I don't want to modify the original code because that may change, and if it does change, they can just copy the jsp block to the new page. Plus there may be more pages where I will need to do the same. Any suggestions?

I am making this a JSP and hosting it in Tomcat since I already have the authentication extracted and base64 decoded with this at the top:
<%@page language="java"%>
<%@ page import="com.Ostermiller.util.Base64 " %>
<%
String auth = request.getHeader("Authorization");
     auth = auth.substring(auth.indexOf(" "));
     String decoded = new String(Base64.decode(auth));
     int i = decoded.indexOf(":");
     String username = decoded.substring(0,i);
     String pwd = decoded.substring(i+1,decoded.length());
%>
Then it has a form with a field checker and then login function:
function do_login()
if (is_ie)
window.document.authenticate.submitbutton.click();
else
window.document.authenticate.submit();
<form method="post" name="authenticate" onsubmit="return check_fields();">
Log in
I was wrong about the cookie. It doesn't set it in that html file, it just checks to see if a cookie exists, if it does, it passes the user through. Normally I would use a cookie bean to do this, but again I have to do this for multiple sites which have different values and encryption. I just want to pass the credentials through and then let the back end do the rest. Do you know of a better way? Thanks for replying.

What adobe product to use to create MP4 with video and slide images with time codes

I wanted to create an MP4 that has video and PPT slide converted to JPG images. What software should I use to create one? Thanks for your help.

Community: Premiere Pro | Adobe Community
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 will help

I have an iphone 5c my friend set up an iclou account and i dont hv the password i want to delete it from my phone so i can set up one and it wont let me without her password and her email no longer exists what can i do

I Meed help with icloud it wont let me delete the account on my phone when the email no longer exists my friend set it up and all i want is to start my own help !!!

Your 'friend' can try to recover the AppleID here:
Find your AppleId: http://support.apple.com/kb/HT5625?viewlocale=en_US&locale=en_US
https://iforgot.apple.com/appleid
Then she can reset the password here:
how to reset password:
https://iforgot.apple.com/password/verify/appleid
If she is the original owner of the iPhone, she can take her proof of
original purchase and the iPhone to Apple where they may be able to
assist. This will not work if she acquired the iPhone used/2cd hand/
as a gift.

I can't copy images from google and any other websites as because when i select the image right click and then choose save image as nothing happens at all.

I m not able to save images from the web into my computer when i hit the save imge option nothing happens.

hello Angshumandev42, from your submitted details the user-agent (the bit of information that identifies the browser) does still look like you are using an old pre-release version of firefox 4.
can you please check in firefox > help > about firefox what version number is displayed there... if it is still 4.0b7 please [[Update Firefox to the latest version]] as soon as possible, since running an old version which dozens of known critical vulnerabilities poses a great security risk.
if you already are on firefox 15, there is a problem with your useragent - please refer to the following article on how to reset it: https://support.mozilla.org/en-US/kb/websites-say-firefox-outdated-or-incompatible#w_other-causes
regarding your original question, please go through the steps of the following support article - it contains the most common solutions for downloading problems: [[What to do if you can't download or save files]]

Acquiring and buffering a video signal without additional software

Hi
I have a generic USB capture box to which I am inputting an RCA video signal only (no sound).
Am I able to display the video feed in Labview and continuously buffer 30 seconds of it?
The idea is that when an input trigger fires the buffered video is saved and the live stream continues to save another 30 seconds. Once the trigger has been fired the video does not need to be displayed. When the recording is finished the program continues to monitor and wait for another input.
I have been told that activex will work, but I don't have any idea how to implement it.
I am using Labview 8.0 and as this is at University I don't have access to any labview plugins.
Any help will be very greatly appreciated.
Mike

Hi Mike,
Thanks for using our discussion forums. In
regards to your USB device, we do offer an NI IMAQ driver for USB which can be
found here http://zone.ni.com/devzone/cda/epd/p/id/5030
. Though it is not supported by our application
engineers, this will allow you to perform very basic image acquisition with
your camera.
If you are able to use our Vision products in the future, a
simple way to save a buffered video in LabVIEW is just to build an array of
images until you reach 30 seconds (you can calculate this based on your
frames/sec rate). In a case structure, we can subset the most
recent items into a sub array and save that to file depending on the data
type. In regards to triggering, we can
software trigger this configuration using another case structure in the while
loop so that when it fires the “buffered” image video will be saved.
If you would like to use ActiveX you can learn more about
this application with LabVIEW at our Developer Zone tutorial http://zone.ni.com/devzone/cda/tut/p/id/2983
. I hope this gives you a good start.
Regards,
Vu Doan
Applications Engineer
National Instruments

How to use Dual monitors with G5 Mac; AND How can the image in "Develop" be made to look like wh

Two questions: How can I use my dual monitors on my G5 Mac?
How can the image in "Develop" be made to look like what it will print, just as it is
done in Photoshop with view>proof setup.

Still wondering what tool is available in LR 1.1 to "view proof"
As in Photoshop CS 3, and previous versions of PS, in view I can
choose the custom .icc profile of the printer, to view what the final
print will nearly perfectly appear like.
What tool is available in LR 1.1 to do the same?
Equipment: Mac OS 10.4.10; dual monitors; Epson Pro 9600 and SPR
2400, both dedicated to matte black ink. Color working space is
ProPhoto RGB. I stay in 16 bit.

How do I darken and blur a BW image without producing stepped gradients

I am putting a stormy sky image in the back of another image. D800E 36 Mb raw file 18 bit which I have converted to B&W in Lightroom. I need it much darker than current correct exposure. Then I need to blur it so it looks like a long lens OF background. If I DON"T darken it, all is well but no matter what kind of Blur I use the smooth gradients in the greys-thru-to-black become stepped and have dividing line. What can I do to get a perfect OF image look?

this seems to be the answer and it works 90% if I add 5% noise not 2% - however, I'm still surprised that this happens.Eliminating Image Banding in Photoshop | Graphics.com

Scroll Bar missing on Safari web pages and unfamiliar screen saver image

I recently upgraded my OS X from Panther to Tiger v. 10.4.11 and upgraded to Safari 3.1.2. Now the scroll bar down the right side is missing from the open web page in Safari. Where did it go and how do I get it back?
Also, unfamiliar images appear, something like a screen saver when I leave my computer for a
few minutes without putting it to sleep or shutting it down. It's a black/white/gray portrait of
a woman and as the picture moves around the screen, the image magnifies. I have no idea
where this image came from nor how to get rid of it. Any ideas?

Hi Busy1, and a warm welcome to the forums!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it finishes.
The usual reason why updates fail or mess things up, or things don't load/run, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates again, or even do an A&I if you have enough free disk space.
The combo update for PowerPC-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateppc.html
The combo update for Intel-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateintel.html
Repair Permissions after re-install, then reboot again.
If all the above do not resolve the problem, then it's time for an Archive & Install, which gives you a new OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space...
http://docs.info.apple.com/article.html?artnum=107120
Might try this for Scroll Bars...
http://lifehacker.com/5040043/add-double-scroll-arrows-to-both-ends-of-the-scrol l-bar
when I leave my computer for a
few minutes without putting it to sleep or shutting it down...
Check System Preferences>Desktop & Screen Saver>Screen saver Tab for that.

Tables used when creating a sales return with and without refrence

Hiya gurus,
                I am developing a report to display sales order and sales return created from one partiular storage location and for one particular division. I need to get the tables used when creating the sales order and the sales return's.
               For sale order I would be using VBAK and VBAP but for sale return with refrence and without refrence i am not sure which tables to look for.
             kindly please let me know which tables i go for to get the sale return data.
            Thanking you very much, your efforts are deply appreciated
Cheers,
ZIa

Hi,
U can see VBFA tablefor CompleteDocu flow with differentconditions.
Regards,

Using IMAQ create, set-up, acquire and windraw to save image without color map

Similar Messages

Maybe you are looking for