Using local functions in compound triggers

Hi anybody,
I'm using ora11gR2. Tried the new compound trigger feature. I define a before each row and an after statement section. Additionally I define several local functions in top of trigger body. In local procedure ( insdelupd within this example ) I get data of old-buffer, but not data of new-buffer. After execution of assignments in insdelupd the variable ParentKeyListOld is filled with actual value of ID1, while ParentKeyListNew is just filled with delimiter ':'. I got the idea, a local procedure outside the specialized trigger sections ( statement or row level ) could be called from both types, but :new and :old-buffers only make sense within row-level section and therefore ther could'nt be access to these buffers. But as debugger shows: the :old-buffer is filled with data.
Has anybody an idea ?
thanks in advance
Wilko Helms
CREATE OR REPLACE TRIGGER BTK."tcm_testtable_1_hp"
for delete or insert or update on BTK.TESTTABLE_1
compound trigger
  ParentKeyListNew varchar2(4096);
  ParentKeyListOld   varchar2(4096);
  procedure InsDelUpd as
  begin
    if updating then
      ParentKeyListNew := ParentKeyListNew || :new.ID1 || ':';
      ParentKeyListOld := ParentKeyListOld || :old.ID1 || ':';
    end if;
  end;
  before each row is
  begin
     InsDelUpd;
  end before each row;
  after statement is
  begin
  end after statement;
end;
[Code]                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

Hi
I only use function returning select when I have a strong reason to do so, because it is so much more difficult to test and maintain. Not sure about performance, but I think it is not that much worse.
If you simply want to reuse SELECT statements, you could use views instead.
Anyway, if you decide to use the package solution, at least you can make it much simpler -- just code like this in the page:
return package.function;
I hope this helps.
Luis

Similar Messages

  • Dblink + local function: INDEX RANGE SCAN not used

    Hi All,
    I have an sql query to remote database:
    SELECT N FROM [email protected] WHERE cd_n = 60
    It works with INDEX RANGE SCAN for "N" field of table "tab", it's ok.
    Now I'm replacing the constant value with the local database function:
    SELECT N FROM [email protected] WHERE cd_n = dannis.foo()
    Then 'INDEX RANGE SCAN' is removed out from query execution plan :-(
    I've tried some tricks as
    /*+ rule index(user.tab TAB$PK) */,
    driving_site(tab),
    to_number(dannis.foo()),
    (select dannis.foo from [email protected])
    and so on...
    but INDEX RANGE SCAN wasn't appear while using the local function.
    Is it true when dblink is used in combination with local function then INDEX RANGE SCAN will never used?
    /Oracle 9.0.1.2/
    Thanx,
    dannis.

    See Optimizer not taking the hint

  • Local function calling remote function - error

    Dear All
    i have following remote function wich return some value from both methods ie.
    1) select func1(variable, varialbe) from dual@remoteDB; working
    2) select func1(variable, varialbe) from dual; -- by making a synonym at local
    Now i create a local function funclocal calling remote functino i.e. func1 in this example as:
    CREATE OR REPLACE FUNCTION funclocal(locc varchar2, artnoo number)
    RETURN NUMBER IS
    query_str VARCHAR2(1000);
    STKQTYY NUMBER;
    artno number(10);
    loc varchar2(80);
    BEGIN
    artno := artnoo;
    loc := locc;
    query_str := 'select func1(loc, artno) from dual ';
    EXECUTE IMMEDIATE query_str
    INTO STKQTYY;
    RETURN STKQTYY;
    END;
    compiled successfully.
    But when i run as:
    SQL> select funclocal('abc', 469183) from dual;
    select funclocal('@st3', 469183) from dual
    ERROR at line 1:
    ORA-00904: "ARTNO": invalid identifier
    ORA-06512: at "funclocal", line 11
    Please guide me.
    Regards
    Saeed

    EXECUTE IMMEDIATE query_strAs Andreas states: Why are you using dynamic sql?
    From what I see all you need is sth like
    create or replace function funclocal (locc varchar2, artnoo number)
       return number
    is
    begin
       return func1 (locc, artnoo);
    end funclocal ;
    /even the whole concept of a »local« function seems suspicious. Why do you need that one?

  • Problem using local variable in event loop

    I have a state machine from which I want to monitor various controls, including "Start" and "Stop" buttons.  Not every state needs to monitor the controls.  At present, most states run timed loops.  In the first state that reads the front panel, I have an Event structure (inside a While loop) that monitors the various controls' Change Value events.  For numeric controls, I update variables (in shift registers) as needed.  The "Start" button is used to end the While loop controlling the Event structure, allowing the State to exit to the next state.
    My problem comes in subsequent states that employ this same idea.  Here, I put a Local Variable bound to the Start button and use the same code, but it frequently happens that when I enter this particular state, I cannot "turn on" the control -- I push the button, but it stays off.  Curiously, if it was On when I enter, I can turn it off, but then I'm stuck not being able to turn it on.
    I mocked up a very simply routine that illustrates this.  There are two sequences (corresponding to the two states).  Both use an Event loop with a local variable bound to my Stop button (really this is an LED control with custom colors).  I've deliberately moved the "initialization" (the declaration of the control in the block diagram) out of the Event loops -- putting it inside the first loop modifies the behavior in another strange way.
    Here's my thinking on how I would expect this to work:  The code outside Event Loop 1 should have little effect.  Assume the Stop button is initially Off.  You will "sit" in Event Loop 1 until you push the Stop button, changing its value to True; this value will be passed out of the Event case and cause the first While loop to exit.  You now enter the second sequence.  As I understand the Exit tunnel, it defaults to "False", so I'd expect to stay in the second Event loop until I turn the Stop button from On to Off, which will pass out a False, and keep me in the While for one more button push.  However, this doesn't happen -- I immediately exit, as though the "True" value of the Stop local variable is being seen and recognized by the Event loop (even though it hasn't changed, at least not in the context of this second loop).
    An even more curious thing occurs if I start this routine with the Stop button turned on.  Now I start in my Event loop waiting for a change, but this time the change will be from On to Off, which won't cause an exit from the frame.  This will be reflected by having the While loop count increment.  We should now be in the state of the example above, i.e. in an Event loop waiting for the control to be pushed again, and turned On.  However, clicking the control has no effect -- I cannot get it to "turn on".
    Where am I going astray in my thinking?  What is it about this method of doing things that violates the Labview paradigm?  As far as I can tell, what I'm doing is "legal", and I don't see the flaw in my reasoning, above (of course not -- otherwise I'd have fixed it myself!).  Note that because I'm using local variables inside Event loops (and I'm doing this because there are two places in my code where I want to do such testing), the Stop control is not latching (as required).  Is there something that gets triggered/set when one reads a latched control?  Do I need to do this "manually" using my local variable?
    I'll try to attach the simple VI that illustrates this behavior.
    Bob Schor
    Attachments:
    Simple Stop Conundrum.vi ‏14 KB

    altenbach wrote:
    Ravens Fan wrote:
    NEVER have multiple event structures that share the same events. 
    Actually, that's OK.  NOT OK is having multiple event structures in the same sequence structure.
    See also: http://forums.ni.com/ni/board/message?board.id=170&message.id=278981#M278981
    That's interesting.  I had always thought I read more messages discouraging such a thing rather than saying it was okay.  Your link lead me to another thread with this message. http://forums.ni.com/ni/board/message?board.id=170&message.id=245793#M245793.  Now that thread was mainly concentrating on registered user events which would be a different, but related animal. 
    So if you have 2 event structures they each have their own event queue?  So if you have a common event, one structure pulls it off its event queue and it does not affect the other structure's event queue?  I guess the inherent problem with this particular VI was that the second event structure locked the front panel.  Since the code never got to that 2nd event structure because the  first loop never stopped because the change was from true to false.  After reading your post and the others, I did some experimentation and turned off the Lock front panel on the 2nd structure, and that prevented the lockup of the program.
    Overall, the example VI still shows problems with the architecture and I think your answer should put the original poster on the right track.  I think as a rule I would probably never put the same event in multiple structures, I feel there are better ways to communicate the same event between different parts of a program,  but I learned something by reading your reply and about how the event structures work in the background.  Thanks.

  • How to find which all workbook is using Database function ( User Defined)

    Hi All,
    Is it possible to find out which all workbook is using Database function( User Defined).
    Thanks,

    Hi,
    If I had to do this detective work, I would probably do the following:
    1. Activate for a period of time the function, eul5_post_save_document. This function when activated is triggered at the time a workbook is saved. If you look at its columns, it save the worksheet's SQL.
    2. Next, I would parse the EUL5_WORKSHEET_SQL.SQL_SEGMENT column which is a varchar2(4000) column. There are many effective Oracle functions which could aid you in this effort (e.g. instring or perhaps a regular expression function).
    I hope this helps.
    Patrick

  • ALV issue: when save list using Local File command will get run time error!

    help!!!!
    report list using ALV method when to save this list using Local File.
    i will get GETWA_NOT_ASSIGNED run time error information.
    how resolve it?
    source code :
    REPORT   ZIFT0103.
    TABLES :  MARA,MARC,CDHDR,CDPOS,MAKT.
    ******DEVK909212****************
    ****利用工厂来区分不同的SERVER的FTP ADDRESS ,user ,PASSWORD
    DATA: FTP_WERKS LIKE MARC-WERKS.
    ********定义一个RANGE用来抓取MARC的信息
    RANGES:R_MATNR FOR MARA-MATNR OCCURS 0.
    ********定义一个INTERNAL TABLE 来抓取MARC 的信息
    DATA:BEGIN OF IT_MARC OCCURS 0,
          MATNR LIKE MARC-MATNR,
          WERKS LIKE MARC-WERKS,
          USERNAME TYPE CDHDR-USERNAME,
         UDATE    TYPE CDHDR-UDATE,
         FLAG_UI TYPE C,
         END OF IT_MARC.
    *******定义存放北京的数据的变量
    DATA : BEGIN OF FTP_BEIJING OCCURS 0 ,
                  MATNR(25) ,
                  MATNR1(25) ,
                  MAKTX(30) ,
           END OF FTP_BEIJING .
    ******定义福清的数据变量
    DATA : BEGIN OF FTP_FUQING OCCURS 0 ,
                  MATNR(25) ,
                  MATNR1(25) ,
                  MAKTX(30) ,
           END OF FTP_FUQING .
    *******DEVK909212*****************
    DATA : BEGIN OF FTP_ITEMDOC1 OCCURS 0 ,
                  MATNR(25) ,
                  MAKTX(30) ,
           END OF FTP_ITEMDOC1 .
    DATA : BEGIN OF FTP_ITEMDOC OCCURS 0 ,
                  MATNR(25) ,
                  MATNR1(25) ,
                  MAKTX(30) ,
           END OF FTP_ITEMDOC .
    DATA: WA_ZMSGTA TYPE ZMSGTA ,
          l_ersda  like MARA-ERSDA .
    ***********DEVK909553********************
    ****用来决定执行FTP还是显示LIST**********
    DATA:g_tcode_flag.
    ***********DEVK909553********************
    Error message process ******************************
    DEFINE EXPLAIN_MSG.
       break soe_richard.
      CALL FUNCTION 'BAPI_MESSAGE_GETDETAIL'
        EXPORTING
          ID                = &1   "SY-MSGID
          NUMBER            = &2   "SY-MSGNO
          LANGUAGE          = SY-LANGU
          TEXTFORMAT        = &3
          LINKPATTERN       =
          MESSAGE_V1        = &4                                "SY-MSGV1
          MESSAGE_V2        = &5                                "SY-MSGV2
          MESSAGE_V3        = &6                                "SY-MSGV3
          MESSAGE_V4        = &7                                "SY-MSGV4
        IMPORTING
          MESSAGE           = &8   "WA_ZMSGTA-MSE1
          RETURN            =
        TABLES
          TEXT              =
    END-OF-DEFINITION.
    DEFINE ERROR_MSG_UPDATA.
      CALL FUNCTION 'ZINSERT_MSG'  "IN UPDATE TASK
        EXPORTING
          XZMSGTA      = &1    "WA_ZMSGTA
        EXCEPTIONS
          UPDATE_ERROR = 1
          OTHERS       = 2.
    END-OF-DEFINITION.
    IF SY-TCODE = 'ZIFT103' .
      g_tcode_flag = 'L'.
      CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
        EXPORTING
          PERCENTAGE = 0
          TEXT       = '请耐心等候,系统正在抓数据'.
    ENDIF.
    l_ersda = sy-datum - 1 .  "取前一天产生的物料号码。
    DATA:BEGIN OF it_change OCCURS 0,
         OBJECTID TYPE CDHDR-OBJECTID,
         USERNAME TYPE CDHDR-USERNAME,
         UDATE    TYPE CDHDR-UDATE,
         TABKEY   TYPE CDPOS-TABKEY,
         END OF it_change.
    DATA:BEGIN OF it_cDhdr OCCURS 0,
         OBJECTID type CDHDR-OBJECTID,
         CHANGENR TYPE CDHDR-CHANGENR,
         USERNAME TYPE CDHDR-USERNAME,
         UDATE    TYPE CDHDR-UDATE,
         END OF it_cdhdr.
    DATA:search_len TYPE I.
    DATA:BEGIN of it_insert OCCURS 0,
         MATNR TYPE MARA-MATNR,
         WERKS TYPE MARC-WERKS,
         END OF it_insert.
    DATA:BEGIN OF it_MAKT OCCURS 0,
         MATNR TYPE MAKT-MATNR,
         MAKTX TYPE MAKT-MAKTX,
         END OF it_makt.
    DATA IT_MARA TYPE TABLE OF MARA WITH HEADER LINE.
    DATA:BEGIN OF IT_OUT OCCURS 0,
         MATNR TYPE MARA-MATNR,
         WERKS TYPE MARC-WERKS,
         MTART TYPE MARA-MTART,
         MEINS TYPE MARA-MEINS,
         MATKL TYPE MARA-MATKL,
         MAKTX TYPE MAKT-MAKTX,
         PSTAT TYPE MARA-PSTAT,
         BRGEW TYPE MARA-BRGEW,
         NTGEW TYPE MARA-NTGEW,
         GEWEI TYPE MARA-GEWEI,
         FERTH TYPE MARA-FERTH,
         KZUMW TYPE MARA-KZUMW,
         ERNAM TYPE MARA-ERNAM,
         ERSDA TYPE MARA-ERSDA,
         END OF IT_OUT.
    *-- DECLARE DATA FOR ALV
    TYPE-POOLS: slis.
    DATA  : g_variant LIKE disvariant,
            g_save(1) TYPE c,
            g_exit(1) TYPE c,
            gx_variant LIKE disvariant.
    DATA: gt_fieldcat TYPE slis_t_fieldcat_alv WITH HEADER LINE, "
          gt_events   TYPE slis_t_event,
          gt_list_top_of_page TYPE slis_t_listheader,
          gs_print TYPE slis_print_alv,
          gs_layout         TYPE slis_layout_alv .
    ******只能抓出系统有做更改的数据***************
    ******而第一次INSERT MARA的数据抓不出来********
    START-OF-SELECTION.
    SELECT AOBJECTID AUSERNAME AUDATE BTABKEY
    INTO TABLE it_change
    FROM ( CDPOS AS B INNER JOIN CDHDR AS A ON
         AOBJECTCLAS = BOBJECTCLAS AND
         AOBJECTID   = BOBJECTID   AND
         ACHANGENR   = BCHANGENR )
    WHERE A~OBJECTCLAS = 'MATERIAL'
    AND   A~UDATE = l_ersda
    AND   B~TABNAME = 'MARC'
    AND   B~CHNGIND = 'I'.
    LOOP AT it_change.
       search_len = STRLEN( it_change-TABKEY ).
       search_len = search_len - 4.
       IF search_len > 0.
         IT_MARC-WERKS = it_change-TABKEY+search_len(4).
       ENDIF.
       IT_MARC-MATNR = it_change-objectid+0(18).
       IT_MARC-USERNAME = it_change-username.
       IT_MARC-UDATE    = It_change-udate.
       IT_MARC-FLAG_UI  = 'U'.
       APPEND IT_MARC.
       CLEAR IT_MARC.
       CLEAR R_MATNR.
       R_MATNR-SIGN = 'I'.
       R_MATNR-OPTION = 'EQ'.
       R_MATNR-LOW = IT_MARC-MATNR.
       APPEND R_MATNR.
    ENDLOOP.
    ****CDPOS is Cluster TABLE 所以没有办法用INNER JOIN******
      SELECT OBJECTID CHANGENR USERNAME UDATE
      INTO TABLE it_cdhdr
      FROM CDHDR
      WHERE OBJECTCLAS = 'MATERIAL'
      AND   UDATE = l_ersda.
    AND   TCODE = 'MM02'.
      LOOP AT IT_cdhdr.
        SELECT * FROM CDPOS
        WHERE OBJECTCLAS = 'MATERIAL'
        AND   OBJECTID  = IT_CDHDR-OBJECTID
        AND   CHANGENR  = IT_CDHDR-CHANGENR
        AND   TABNAME   = 'MARC'
        AND   CHNGIND = 'I'.
          search_len = STRLEN( CDPOS-TABKEY ).
          search_len = search_len - 4.
          IF search_len > 0.
            IT_MARC-WERKS = CDPOS-TABKEY+search_len(4).
          ENDIF.
          IT_MARC-MATNR = IT_cdhdr-objectid+0(18).
          IT_MARC-USERNAME = IT_cdhdr-username.
          IT_MARC-UDATE    = IT_cdhdr-udate.
          IT_MARC-FLAG_UI  = 'U'.
          APPEND IT_MARC.
         CLEAR IT_MARC.
          CLEAR R_MATNR.
          R_MATNR-SIGN = 'I'.
          R_MATNR-OPTION = 'EQ'.
          R_MATNR-LOW = IT_MARC-MATNR.
          APPEND R_MATNR.
          CLEAR IT_MARC.
        ENDSELECT.
      ENDLOOP.
      IF g_tcode_flag = 'L'.
        CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
          EXPORTING
            PERCENTAGE = 20
            TEXT       = '处理好当天CHANGE的数据'.
      ENDIF.
    *******抓当天做了INSERT的数据*************
    *******不需要***********************
    SELECT BMATNR BWERKS INTO TABLE IT_INSERT
    FROM MARC AS B JOIN MARA AS A
    ON   AMATNR = BMATNR
    WHERE A~ERSDA = l_ersda.
    LOOP AT IT_INSERT.
       IT_MARC-MATNR = IT_INSERT-MATNR.
       IT_MARC-WERKS = IT_INSERT-WERKS.
       IT_MARC-FLAG_UI = 'I'.
       APPEND IT_MARC.
       CLEAR IT_MARC.
       CLEAR R_MATNR.
       R_MATNR-SIGN = 'I'.
       R_MATNR-OPTION = 'EQ'.
       R_MATNR-LOW = IT_MARC-MATNR.
       APPEND R_MATNR.
    ENDLOOP.
    IF g_tcode_flag = 'L'.
       CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
         EXPORTING
           PERCENTAGE = 40
           TEXT       = '处理好当天INSERT的数据'.
    ENDIF.
      IF g_tcode_flag = 'L'.
        PERFORM get_MAKTX.
        PERFORM get_mara.
        CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
          EXPORTING
            PERCENTAGE = 100
            TEXT       = '处理好数据,并开始显示数据'.
        PERFORM do_data.
        PERFORM display_alv.
      ELSE.
        PERFORM get_MAKTX.
        PERFORM do_ftp.
      ENDIF.
    *&      Form  get_marktx
          text
    FORM get_maktx.
      SELECT MATNR MAKTX INTO TABLE IT_MAKT FROM MAKT
      WHERE MATNR IN R_MATNR AND SPRAS = '1'.
    ENDFORM.                    "get_marktx
    *&      Form  get_mara
          text
    FORM get_mara.
      SELECT * INTO TABLE it_mara FROM MARA
      WHERE MATNR IN R_MATNR.
    ENDFORM.                    "get_mara
    *&      Form  do_data
          text
    FORM do_data.
      SORT IT_MARC BY MATNR WERKS.
      DELETE ADJACENT DUPLICATES FROM IT_MARC COMPARING MATNR WERKS.
      LOOP AT IT_MARC.
        CLEAR IT_MAKT.
        CLEAR IT_MARA.
        READ TABLE IT_MAKT WITH KEY MATNR = IT_MARC-MATNR.
        READ TABLE IT_MARA WITH KEY MATNR = IT_MARC-MATNR.
        MOVE-CORRESPONDING IT_MARA TO IT_OUT.
        IT_OUT-MAKTX = IT_MAKT-MAKTX.
        IT_OUT-WERKS = IT_MARC-WERKS.
        IF IT_MARC-FLAG_UI = 'U'.
          IT_OUT-ERNAM = IT_MARC-USERNAME.
        ENDIF.
        APPEND IT_OUT.
        CLEAR IT_OUT.
      ENDLOOP.
    ENDFORM.                    "do_data
    *SELECT AMATNR BMAKTX INTO CORRESPONDING
    *FIELDS OF FTP_ITEMDOC1 FROM MARA AS A JOIN MAKT AS B
    *ON AMATNR = BMATNR WHERE A~ERSDA = l_ersda
    *AND B~SPRAS = '1' . "代表为中文说明。
    APPEND FTP_ITEMDOC1.
    *******DEVK909212****************
    *******添加RANGE*****************
    CLEAR R_MATNR.
    R_MATNR-SIGN = 'I'.
    R_MATNR-OPTION = 'EQ'.
    R_MATNR-LOW = FTP_ITEMDOC1-MATNR.
    APPEND R_MATNR.
    CLEAR  FTP_ITEMDOC1.
    *******DEVK909212****************
    *ENDSELECT.
    *******DEVK909212****************
    ****get WERKS information from MARC*******
    *SELECT MATNR WERKS INTO TABLE IT_MARC
    *FROM MARC
    *WHERE MATNR IN R_MATNR.
    *******DEVK909212****************
    ******DEVK909212****************
    **MARK**************************
    *LOOP AT FTP_ITEMDOC1 .
    MOVE : FTP_ITEMDOC1-MATNR TO FTP_ITEMDOC-MATNR,
            FTP_ITEMDOC1-MATNR TO FTP_ITEMDOC-MATNR1,
            FTP_ITEMDOC1-MAKTX TO FTP_ITEMDOC-MAKTX.
    APPEND FTP_ITEMDOC.
    CLEAR FTP_ITEMDOC.
    *ENDLOOP.
    ******DEVK909212****************
    ******DEVK909212***********************************
    **根据IT_MARC中信息，往北京和福清的TABLE写数据*****
    FORM do_ftp.
      LOOP AT IT_MARC.
    ***福清的
        IF IT_MARC-WERKS = '1010' OR IT_MARC-WERKS = '1020'
           OR IT_MARC-WERKS = '1023' .
         READ TABLE FTP_ITEMDOC1 WITH KEY MATNR = IT_MARC-MATNR.
         MOVE : FTP_ITEMDOC1-MATNR TO FTP_FUQING-MATNR,
            FTP_ITEMDOC1-MATNR TO FTP_FUQING-MATNR1,
            FTP_ITEMDOC1-MAKTX TO FTP_FUQING-MAKTX.
          CLEAR IT_MAKT.
          READ TABLE IT_MAKT WITH KEY = IT_MARC-MATNR.
          MOVE : IT_MARC-MATNR TO FTP_FUQING-MATNR,
             IT_MARC-MATNR TO FTP_FUQING-MATNR1,
             IT_MAKT-MAKTX TO FTP_FUQING-MAKTX.
          APPEND FTP_FUQING.
          CLEAR FTP_FUQING.
        ENDIF.
    ***北京的
        IF IT_MARC-WERKS = '1041' OR IT_MARC-WERKS = '1042'.
         READ TABLE FTP_ITEMDOC1 WITH KEY MATNR = IT_MARC-MATNR.
         MOVE : FTP_ITEMDOC1-MATNR TO FTP_BEIJING-MATNR,
            FTP_ITEMDOC1-MATNR TO FTP_BEIJING-MATNR1,
            FTP_ITEMDOC1-MAKTX TO FTP_BEIJING-MAKTX.
          CLEAR IT_MAKT.
          READ TABLE IT_MAKT WITH KEY = IT_MARC-MATNR.
          MOVE : IT_MARC-MATNR TO FTP_BEIJING-MATNR,
                 IT_MARC-MATNR TO FTP_BEIJING-MATNR1,
                 IT_MAKT-MAKTX TO FTP_BEIJING-MAKTX.
          APPEND FTP_BEIJING.
          CLEAR FTP_BEIJING.
        ENDIF.
      ENDLOOP.
    ****清楚重复的数据**********
      SORT FTP_FUQING.
      DELETE ADJACENT DUPLICATES FROM FTP_FUQING.
      SORT FTP_BEIJING.
      DELETE ADJACENT DUPLICATES FROM FTP_BEIJING.
    ***传送数据********
      REFRESH FTP_ITEMDOC.
      FTP_ITEMDOC[] = FTP_FUQING[].
      FTP_WERKS = '1010'.
      PERFORM ftp_work.
      REFRESH FTP_ITEMDOC.
      FTP_ITEMDOC[] = FTP_BEIJING[].
      FTP_WERKS = '1041'.
      PERFORM ftp_work.
    ******DEVK909212***********************************
    ENDFORM.                    "do_ftp
    *&      Form  ftp_work
         把以前FTP的工作做一个FORM
    *******DEVK909212**************************
    FORM ftp_work.
    *******DEVK909212**************************
      CHECK FTP_ITEMDOC[] IS NOT INITIAL.
    FTP function *****************************************************
      DATA : HDL TYPE I,
             L_SLEN TYPE I ,
             ERROR,
             KEY TYPE I VALUE 26101957,
             DEST TYPE RFCDES-RFCDEST VALUE 'SAPFTPA'.
      DATA: FTP_RESULT TYPE TABLE OF TEXT.
      DATA: P_FILE TYPE RLGRAP-FILENAME.
      DATA: L_USER(16) TYPE C VALUE 'SFIS',
            L_PWD(16) TYPE C VALUE 'SFIS',
            L_HOST(16) TYPE C VALUE '172.16.31.17'.
    *******DEVK909212**************************
    *****根据不同的工厂来抓FTP的信息
      CALL FUNCTION 'Z_FTP_SFIS'
        EXPORTING
          BLART = 'S'
          WERKS = FTP_WERKS
        IMPORTING
          HOST  = L_HOST
          USER1 = L_USER
          PASS1 = L_PWD.
    *******DEVK909212**************************
      CONCATENATE l_ersda '.KP' INTO P_FILE.
      SET EXTENDED CHECK OFF.
      ERROR = 0.
      CHECK HDL IS INITIAL.
    Connect to server
      L_SLEN = STRLEN( L_PWD ).
      CALL FUNCTION 'HTTP_SCRAMBLE'
        EXPORTING
          SOURCE      = L_PWD
          SOURCELEN   = L_SLEN
          KEY         = KEY
        IMPORTING
          DESTINATION = L_PWD.
    CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
       EXPORTING
         TEXT = 'Connect to FTP Server'.
      CALL FUNCTION 'FTP_CONNECT'
        EXPORTING
          USER            = L_USER
          PASSWORD        = L_PWD
          HOST            = L_HOST
          RFC_DESTINATION = DEST
        IMPORTING
          HANDLE          = HDL
        EXCEPTIONS
          NOT_CONNECTED   = 1
          OTHERS          = 2.
      IF SY-SUBRC <> 0.
        MOVE: 'B' TO WA_ZMSGTA-BLART,
              l_ersda  TO WA_ZMSGTA-REFNUMBER,
              SY-MSGTY TO WA_ZMSGTA-MSGTY,
              'MARA' TO WA_ZMSGTA-TBMA_VAL.
        EXPLAIN_MSG SY-MSGID SY-MSGNO ' ' SY-MSGV1 SY-MSGV2 SY-MSGV3
                    SY-MSGV4 WA_ZMSGTA-MSE1.
        ERROR_MSG_UPDATA WA_ZMSGTA.
        EXIT.
      ENDIF.
      CALL FUNCTION 'FTP_COMMAND'
        EXPORTING
          HANDLE        = HDL
          COMMAND       = 'ascii'
        TABLES
          DATA          = FTP_RESULT
        EXCEPTIONS
          TCPIP_ERROR   = 1
          COMMAND_ERROR = 2
          DATA_ERROR    = 3.
      IF SY-SUBRC <> 0.
        EXPLAIN_MSG SY-MSGID SY-MSGNO ' ' SY-MSGV1 SY-MSGV2 SY-MSGV3
                    SY-MSGV4 WA_ZMSGTA-MSE1.
        MOVE: 'B' TO WA_ZMSGTA-BLART,
              l_ersda  TO WA_ZMSGTA-REFNUMBER,
              SY-MSGTY TO WA_ZMSGTA-MSGTY,
              'MARA' TO WA_ZMSGTA-TBMA_VAL.
        ERROR_MSG_UPDATA WA_ZMSGTA.
        EXIT.
      ENDIF.
      CALL FUNCTION 'FTP_R3_TO_SERVER'
        EXPORTING
          HANDLE         = HDL
          FNAME          = P_FILE
          CHARACTER_MODE = 'X'
        TABLES
          TEXT           = FTP_ITEMDOC
        EXCEPTIONS
          TCPIP_ERROR    = 1
          COMMAND_ERROR  = 2
          DATA_ERROR     = 3
          OTHERS         = 4.
      IF SY-SUBRC <> 0.
        EXPLAIN_MSG SY-MSGID SY-MSGNO ' ' SY-MSGV1 SY-MSGV2 SY-MSGV3
                    SY-MSGV4 WA_ZMSGTA-MSE1.
        MOVE: 'B' TO WA_ZMSGTA-BLART,
              l_ersda  TO WA_ZMSGTA-REFNUMBER,
              SY-MSGTY TO WA_ZMSGTA-MSGTY,
              'MARA' TO WA_ZMSGTA-TBMA_VAL.
        ERROR_MSG_UPDATA WA_ZMSGTA.
        EXIT.
      ENDIF.
    *******DEVK909212**************************
    *******CLOSE FTP******************
      CHECK NOT HDL IS INITIAL.
      CALL FUNCTION 'FTP_DISCONNECT'
        EXPORTING
          HANDLE = HDL.
      CALL FUNCTION 'RFC_CONNECTION_CLOSE'
        EXPORTING
          DESTINATION = DEST
        EXCEPTIONS
          OTHERS      = 1.
      CLEAR HDL.
    ENDFORM.                    "ftp_work
    *******DEVK909212**************************
    FORM DISPLAY_ALV .
    *-- PREPARE ALV DATA
      PERFORM EVENTTAB_BUILD USING GT_EVENTS[].
      PERFORM COMMENT_BUILD  USING GT_LIST_TOP_OF_PAGE[].
    *-- LAYOUT SETTING
      PERFORM PREPARE_ALV_FIELD USING GT_FIELDCAT[].
    *-- ALV DISPLAY
      PERFORM CALL_REUSE_ALV_GRID_DISPLAY.
    ENDFORM.                    " display_alv
    *&      Form  eventtab_build
          text
         -->P_GT_EVENTS[]  text
    FORM EVENTTAB_BUILD USING PT_EVENTS TYPE SLIS_T_EVENT.
      DATA: LS_EVENT TYPE SLIS_ALV_EVENT.
      CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
        EXPORTING
          I_LIST_TYPE = 0
        IMPORTING
          ET_EVENTS   = PT_EVENTS.
      READ TABLE PT_EVENTS WITH KEY NAME =  SLIS_EV_TOP_OF_PAGE
                               INTO LS_EVENT.
      IF SY-SUBRC = 0.
        LS_EVENT-FORM = 'TOP_OF_PAGE'.
        MODIFY PT_EVENTS FROM LS_EVENT INDEX SY-TABIX.
      ENDIF.
    ENDFORM.                    " eventtab_build
    *&      Form  comment_build
          text
         -->P_GT_LIST_TOP_OF_PAGE[]  text
    FORM COMMENT_BUILD  USING PT_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER.
      DATA: LS_LINE TYPE SLIS_LISTHEADER,
            L_DATE(30),
            l_v_BWKEY like T001W-BWKEY,  "Valuation area
            l_v_BUKRS like T001K-BUKRS.  "Firm/Company
    Listen&#57692;erschrift: Typ H
    CLEAR LS_LINE.
    LS_LINE-TYP  = 'H'.
    LS_LINE-KEY:  not used for this type
    select single BWKEY
       into l_v_BWKEY
       from t001w
       where WERKS IN s_WERKS.
    select single BUKRS
       into l_v_BUKRS
       from t001k
       where BWKEY = l_v_BWKEY.
    SELECT SINGLE butxt INTO LS_LINE-INFO
        FROM t001
       WHERE bukrs = l_v_BUKRS.
    APPEND LS_LINE TO PT_TOP_OF_PAGE.
    Kopfinfo: Typ S
      CLEAR LS_LINE.
      LS_LINE-TYP  = 'S'.
      LS_LINE-KEY  = '&#25253;&#34920;&#21517;&#31216;&#65306;'.
      LS_LINE-INFO = SY-TITLE.
      APPEND LS_LINE TO PT_TOP_OF_PAGE.
      CLEAR LS_LINE.
      LS_LINE-TYP  = 'S'.
      LS_LINE-KEY  = '&#25171;&#21360;&#26085;&#26399;&#65306;'.
      WRITE SY-DATUM TO LS_LINE-INFO.
    ls_line-info = sy-datum.
      APPEND LS_LINE TO PT_TOP_OF_PAGE.
      CLEAR LS_LINE.
      LS_LINE-TYP  = 'S'.
      LS_LINE-KEY  = '&#25171;&#21360;&#26178;&#38291;&#65306;'.
      WRITE SY-UZEIT TO LS_LINE-INFO.
    ls_line-info = sy-uzeit.
      APPEND LS_LINE TO PT_TOP_OF_PAGE.
      CLEAR LS_LINE.
      LS_LINE-TYP  = 'S'.
      LS_LINE-KEY  = '&#20351;&#29992;&#32773;&#65306;'.
      LS_LINE-INFO = SY-UNAME.
      APPEND LS_LINE TO PT_TOP_OF_PAGE.
    ENDFORM.                    " comment_build
    *&      Form  prepare_alv_field
          text
         -->P_GT_FIELDCAT[]  text
    FORM PREPARE_ALV_FIELD USING P_FIELDCAT TYPE  SLIS_T_FIELDCAT_ALV.
      DATA: LS_LINE TYPE  SLIS_FIELDCAT_ALV.
    *-- DEFINE MARCO
      DEFINE APPEND_ALV_FIELD.
        CLEAR LS_LINE.
        LS_LINE-FIELDNAME = &1.
        LS_LINE-TABNAME = &2.
        LS_LINE-REPTEXT_DDIC = &3.
        LS_LINE-SELTEXT_L = &3.
        LS_LINE-SELTEXT_M = &3.
        LS_LINE-SELTEXT_S = &3.
        LS_LINE-QFIELDNAME = &4.
        LS_LINE-QTABNAME = &5.
        LS_LINE-NO_OUT    = &6.
        LS_LINE-NO_ZERO   = &7.
        LS_LINE-OUTPUTLEN = &8.
        APPEND LS_LINE TO P_FIELDCAT.
      END-OF-DEFINITION.
      APPEND_ALV_FIELD: 'MATNR' 'IT_OUT' '&#26009;&#21495;'
                      'O' 'X' ''.
      APPEND_ALV_FIELD: 'WERKS' 'IT_OUT' '&#24037;&#21378;'
                       'O' 'X' ''.
      APPEND_ALV_FIELD: 'MTART' 'IT_OUT' 'MTyp'
                       'O' 'X' ''.
      APPEND_ALV_FIELD: 'MEINS' 'IT_OUT' 'BUn'
                       'O' 'X' ''.
      APPEND_ALV_FIELD: 'MATKL' 'IT_OUT' '&#29289;&#26009;&#32452;\&#20998;&#32676;&#30721;'
                       'O' 'X' ''.
      APPEND_ALV_FIELD: 'MATKX' 'IT_OUT' '&#29289;&#26009;&#25551;&#36848;'
                        'O' 'X' ''.
      APPEND_ALV_FIELD: 'PSTAT' 'IT_OUT' '&#32500;&#25252;&#29366;&#24577;'
                        'O' 'X' ''.
      APPEND_ALV_FIELD: 'BRGEW' 'IT_OUT' '&#27611;&#37325;'
                       'O' 'X' ''.
      APPEND_ALV_FIELD: 'NTGEW' 'IT_OUT' '&#20928;&#37325;'
                       'O' 'X' ''.
      APPEND_ALV_FIELD: 'GEWEI' 'IT_OUT' 'WUn'
                      'O' 'X' ''.
      APPEND_ALV_FIELD: 'FERTH' 'IT_OUT' '&#23545;&#22806;&#26426;&#31181;&#21517;'
                     'O' 'X' ''.
      APPEND_ALV_FIELD: 'KZUMW' 'IT_OUT' '&#39640;&#20851;&#31246;&#26631;&#35782;'
                   'O' 'X' ''.
      APPEND_ALV_FIELD: 'ERNAM' 'IT_OUT' '&#21019;&#24314;&#32773;'
                 'O' 'X' ''.
      APPEND_ALV_FIELD: 'ERSDA' 'IT_OUT' '&#21019;&#24314;&#26085;&#26399;'
              'O' 'X' ''.
    ENDFORM.                    " prepare_alv_field
    *&      Form  call_reuse_alv_grid_display
          text
    -->  p1        text
    <--  p2        text
    FORM CALL_REUSE_ALV_GRID_DISPLAY .
      gs_layout-f2code              = 'DISPLAY'.
      gs_print-no_print_listinfos   = 'X'.
      gs_layout-colwidth_optimize   = 'X'.       "&#21015;&#23485;&#24230;&#33258;&#21160;&#26681;&#25454;&#20869;&#23481;&#20248;&#21270;
    gs_layout-f2code              = '&ETA'.    "double check&#24377;&#20986;&#35814;&#32454;&#20449;&#24687;
      gs_layout-zebra               = 'X'.       "&#28165;&#21333;&#26465;&#32441;&#26174;&#31034;
      gs_layout-no_vline            = ''.        "&#26159;&#21542;&#26174;&#31034;&#21015;&#38388;&#38548;&#32447;
      gs_layout-box_fieldname       = ''.        "&#26159;&#21542;&#26174;&#31034;checkbox
      gs_layout-confirmation_prompt = ''.        "&#25512;&#20986;&#28165;&#21333;&#26159;&#21542;&#25552;&#31034;
      gs_layout-detail_titlebar     = '&#35814;&#32454;&#20449;&#24687;'."&#35814;&#32454;&#28165;&#21333;&#30340;&#26631;&#39064;
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          I_CALLBACK_PROGRAM                = SY-CPROG
          I_BACKGROUND_ID                   = 'ALV_BACKGROUND'
         I_CALLBACK_PF_STATUS_SET          = 'ALV_PF_STATUS'
         I_CALLBACK_USER_COMMAND           = 'ALV_USER_COMMAND'
         I_CALLBACK_TOP_OF_PAGE            = GT_LIST_TOP_OF_PAGE[]
          IT_FIELDCAT                       = GT_FIELDCAT[]
          IT_EVENTS                         = GT_EVENTS[]
          I_STRUCTURE_NAME                  = 'IT_OUT'
          I_SAVE                            = 'A'
          IS_LAYOUT                         = GS_LAYOUT
          IS_PRINT                          = GS_PRINT
        TABLES
          T_OUTTAB                          = IT_OUT
        EXCEPTIONS
          PROGRAM_ERROR                     = 1
          OTHERS                            = 2
      IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    " call_reuse_alv_grid_display
    *&      Form  PREPARE_ALV_FIELD
    FORM TOP_OF_PAGE.
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
        EXPORTING
          IT_LIST_COMMENTARY = GT_LIST_TOP_OF_PAGE.
    ENDFORM.                    "TOP_OF_PAGE

    Hi,
    Please check your field catalog and refer field names once again.
    Check spelling, or Check strucutre properly.
    There are something wrong in your catalog definition
    aRs.

  • Using hsgetvalue function to retrieve Hyperion Planning Data

    Hi All,
    Lots of discussion about hsgetvalue, but still I do not succeed in using this function. Maybe someone can help.
    Is this function work for HFM or also Hyperion Planning? Currently we are using Hyperion Planning 11.1.1.3 with related Essbase. This is what we've tried in Excel:
    =hsgetvalue(“";”Scenario#BudFin;Year#FY12;Period#Begbalance;Partner#NA_Partner;Product#A251;Account#BOM Weight;Version#Working;Misc#R-SBDA;Entity#No Entity;Currency#Qty") ===> the result is syntax error.
    =hsgetvalue("","Scenario#BudFin","Year#FY12","Period#Begbalance","Partner#NA_partner","Product#A251","Account#BOM Weight","Version#Working","Entity#No Entity","Currency#Qty","Misc#R-SBDA") ===> the result is No Connection.
    Actually I'm still confused about the Connection parameter, which connection name we have to use?
    Thanks.
    Gajah

    Hi,
    HsGetValue
    Data sources: Financial Management, Hyperion Enterprise, Essbase
    HsGetValue retrieves data from the data source for selected members of a dimension. When HsGetValue retrieves no data, the value specified for the #NoData/Missing Label replacement option is used.
    When users select Refresh or Refresh All, only HsGetValue is called. When users select Submit, HsSetValue is called first, HsGetValue is then called only if HsSetValue returns successfully.
    Syntax
    HsGetValue(“Connection”,”POV”)
    Connection parameters can have these values:
    Empty: the default connection
    HsActive: the active associated connection
    The user-defined name for a private connection
    You connect to data sources through shared or private connections.
    _# Shared Connections_
    Shared connections are stored in a central location and are available to multiple users through the Smart View Panel. You cannot add, edit, or rename shared connections, but you can save them as private connections, which you can edit and rename.
    _# Private Connections_
    Private connections are those that you create by saving a shared connection to your local computer or by entering a URL to a provider that is not configured for shared connections. When you create a private connection, it becomes the active connection.
    Creating Private Connections
    You can create a private connection from a connection that is not listed in Shared Connections if you know the URL.
    To add a connection using a URL:
    1. From the Smart View ribbon, click Panel.
    2. From the Smart View panel, click the arrow next to "Home" Icon, and then select Private Connections.
    3. In the text box, enter the URL or the local storage directory for the data source to which you want to connect. The URL syntax for the various data sources is as follows.
    Financial Management: http(s)://servername:port/hfmofficeprovider/hfmofficeprovider.aspx
    Hyperion Enterprise: http://servername:port/heofficeprovider/heofficeprovider.aspx
    Planning: http(s)://servername:port/HyperionPlanning/SmartView
    Essbase: http(s)://servername:port/aps/SmartView
    Reporting and Analysis: http(s)://servername:port/raframework/browse/listxml
    Financial Close Management: http://servername:port/fcc/servlets/smartview/fcmsvservlet
    Oracle Hyperion Strategic Finance: http://servername:port/StrategicPlanning/SmartView
    4. Click Next Button
    5. Enter the Name of the connect as "Essbase_Conn"
    6. Enter username, password and connect the worksheet.
    Now you can create functions by two methods -
    1. Using Function Builder
    2. Manually (Which you have opted)
    To create a function manually:*
    1. In Excel, click the cell in which you want to enter the function.
    2. Enter = (equal sign).
    3. Enter the function name, HsGetValue, for example.
    4 Enter parameters for the function,
    HsGetValue(“Connection”,”POV”)
    Connection parameters can have these values:
    # Empty: the default connection
    # HsActive: the active associated connection
    # The user-defined name for a private connection
    so the function looks like this:
    HsGetValue(“Essbase_Conn”;"Year#Jan;Measures#Sales;Product#100;Market#East;Scenario#Actual")
    5. To refresh the worksheet, from the Smart View menu, select Refresh. Functions are validated only when you refresh them.
    REFERENCE: Chapter 2 & Chapter 15 of the SmartView Guide at http://docs.oracle.com/cd/E17236_01/epm.1112/sv_user.pdf
    KosuruS
    Edited by: KosuruS on Jul 12, 2012 9:55 AM

  • Using packaged functions in Apex

    Hi,
    I'm fairly new to apex and I am about to write an app which needs to access a SQL server database. My local dba has set up the transparent gateway and I can select from and update the SQLServer database no problem via a db link. What I need to decide is whether to code the sql for reports etc directly into the apex page or to call a pl/sql function returning a select statement. I would like to have all the code in packages as a lot of it will be used by multiple apps in future but is there any extra overhead in doing this:
    declare
    l_sql varchar2(4000);
    begin
    select package.function into l_sql from dual;
    return l_sql;
    end;
    rather than coding the SQL directly in the page? Also is there a more efficient way of using packaged functions to select data rather that just have it returning sql statements.
    Thanks in advance.
    Dave

    Hi
    I only use function returning select when I have a strong reason to do so, because it is so much more difficult to test and maintain. Not sure about performance, but I think it is not that much worse.
    If you simply want to reuse SELECT statements, you could use views instead.
    Anyway, if you decide to use the package solution, at least you can make it much simpler -- just code like this in the page:
    return package.function;
    I hope this helps.
    Luis

  • How to use FPRINT32 function in MF cobol

    Hi,
    How to use FPRINT32 function to check the value of any buffer defined in MF cobol code.
    When we tried, CALL FPRINT32 USING OUTPUT-FML
    OUTPUT-FML is a buffer which is defined in our cobol code.
    We are getting below error.
    ld: 0711-224 WARNING: Duplicate symbol: p_xargc
    ld: 0711-224 WARNING: Duplicate symbol: p_xargv
    ld: 0711-224 WARNING: Duplicate symbol: .tpsvrdone
    ld: 0711-224 WARNING: Duplicate symbol: .tpsvrinit
    ld: 0711-224 WARNING: Duplicate symbol: TPSVRINIT
    ld: 0711-224 WARNING: Duplicate symbol: .TPSVRINIT
    ld: 0711-224 WARNING: Duplicate symbol: tpsvrinit
    ld: 0711-224 WARNING: Duplicate symbol: tpsvrdone
    ld: 0711-224 WARNING: Duplicate symbol: .userlog
    ld: 0711-224 WARNING: Duplicate symbol: userlog
    ld: 0711-224 WARNING: Duplicate symbol: p_xrcfg
    ld: 0711-224 WARNING: Duplicate symbol: p_xrc
    ld: 0711-345 Use the -bloadmap or -bnoquiet option to obtain more information.
    ld: 0711-317 ERROR: Undefined symbol: .FPRINT32
    CMDTUX_CAT:1832: ERROR: can't execute cobcc -I$TUXDIR/include -L/lib -lpthreads -L/usr/local/opt/oracle/product/ostl133/lib/ -lclntsh -lrtl -lld -lm /lib/crt0_64.o -ldl -lc -lm -lpthreads -lodm -lbsd_r -lld -lperfstat -lm -lc_r -lpthreads /usr/local/opt/oracle/product/ostl133/precomp/lib/cobsqlintf.o /usr/local/opt/oracle/product/ostl133/lib/libclntsh.a -C linkcount=1024 -o BS-f804a.c -L${TUXDIR}/lib TPSVRINIT.o -brtl -qstaticinline -lcobatmis -ltux -lbuft -lfml -lfml32 -lengine -lpthread
    Please help in this regard,
    Thanks

    Hi,
    As far as I know there is no FPRINT32 function in the Tuxedo COBOL interface.
    The ATMI COBOL Function Reference for the latest Tuxedo 11.1.1.2.0 release at
    http://download.oracle.com/docs/cd/E18050_01/tuxedo/docs11gr1/rf3cbl/rf3cbl.html shows FINIT, FINIT32, FVFTOS, FVFTOS32, FVSTOF, and FVSTOF32 as the only supported COBOL interface functions related to FML.
    COBOL is better suited to dealing with the fixed record structure of views than with the variable record format of FML buffers. The COBOL interface offers functions to initialize and FML buffer and to convert an FML buffer to and from a VIEW so that preexisting services taking FML buffers as input or output parameters can be called, but the expectation is that the COBOL program will conver the FML buffer to a VIEW before accessing it.
    It is possible to call the Tuxedo C interface Fprint32() function from COBOL using standard interlanguage calling conventions. Also, you may want to check with other developers on your project to see if someone may have already implemented such a function.
    Regards,
    Ed

  • How to use the function module which i mentioned, to store the pdf files

    hi,
    SO_NEW_DOCUMENT_ATT_SEND_API1
    I am using above function module to send employ details through mail in pdf format, if i want to store that pdf files in a local computer too, then how should i catch hold off those individual pdf files of all employees, plz help me out with a sample code

    hey iam from functional side can u be little bit clear of that feature
    thanks
    sikindar

  • No checkbox appears in dialong box to "use local drafts folder"

    Using Windows 8.1, ,Word 2013, and IE 11.  When I edit a document from SharePoint Foundation 2010 (Hosted), no checkbox appears in the Microsoft Internet Explorer dialog box to "use local drafts folder".  As a result, no SharePoint
    Drafts folder is created in the location specified under Word 2013 Save Option for offline editing and the SharePoint file is not downloaded locally.  I performed the following troubshooting steps below with no fix so far. 
    1) Confirmed that "SharePoint OpenDocuments Class" is "enabled" as an add-on under IE.
    2) Confirmed that Word 2013 Save setting for offline editing are marked as follows:
     Save checked-out files to “The server drafts location on this computer”
     Server draft location: \\users\xxxx\documents\SharePoint Drafts
    3) Tried the SharePoint checkout and editing on a Windows 7, IE 11, Word 2010 workstation and there was no issue.  Checkbox appears. 
     I've exhausted all resources.  Please assist with providing next steps. Unable to load a Screen shot below due to account validation critieria.
    Kind regards,
    Nancy Page

    Hi,
    According to your post, my understanding is that you wanted to display the “use local drafts folder”.
    In Office 2013 it is by design.
    The “Use my local drafts
    folder” functionality has been removed for Office
    2013. 
    This step has been done in order to improve the Client/Server communication by removing some of the redundant network calls generated by this process.
    In order to get office files synchronized with SharePoint document libraries you could
    use SkyDrive Pro instead.
    SkyDrive Pro is getting installed with Office 2013 but is available as a standalone setup as well.  But please note that SkyDrive Pro requires to have a SharePoint server
    2013 installed or a O365 subscription, which brings SPO
    2013.
    If you want to use the “use my local drafts folder”, you should install the Office 2010 instead of Office 2013.
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • Use of function

    I have a table with this records:
    linknumber history
    110 46,57,89
    220
    50
    330 22
    440 10,12
    I want to have this result:
    rownumber linknumber
    history
    1 110 46
    2 110 57
    3 110 89
    4 220 50
    5 330 22
    6 440
    10
    7 440 12
    and I have this function for split(camma):
    ALTER FUNCTION
    [dbo].[Split](@String varchar(8000), @Delimiter char(1))
    returns @temptable
    TABLE (items varchar(8000))
    as
    begin
    declare @idx int
    declare
    @slice varchar(8000)
    select @idx = 1
    if len(@String)<1 or @String
    is null return
    while @idx!= 0
    begin
    set @idx =
    charindex(@Delimiter,@String)
    if @idx!=0
    set @slice = left(@String,@idx
    - 1)
    else
    set @slice = @String
    if(len(@slice)>0)
    insert
    into @temptable(Items) values(@slice)
    set @String =
    right(@String,len(@String) - @idx)
    if len(@String) = 0 break
    end
    return
    end
    but I don,t know how to use this function in T-sql for
    my favorir result?plaese guide me how do I do this?thanks

    >> I have a table with this records [sic]: <<
    Rows are not records; this is a basic concept in RDBMS. Please post DDL, so that people do not have to guess what the keys, constraints, Declarative Referential Integrity, data types, etc. in your schema are. Learn how to follow ISO-11179 data element naming
    conventions and formatting rules. Temporal data should use ISO-8601 formats. Code should be in Standard SQL as much as possible and not local dialect. 
    This is minimal polite behavior on SQL forums. 
    The term “link” is not RDBMS, either. It comes from pointer chains and linked lists. RDBMS has no pointers or lists! It looks like you have no idea what you are doing. 
    Non-RDBMS programmers violate 1NF and write those absurd string splitters. In fact, you did not do a good job of writing bad code. You posted a BASIC or FORTRAN program written with 1970's T-SQL. You even used != instead of SQL's <> !  
    Passing a list of parameters to a stored procedure can be done by putting them into a string with a separator. I like to use the traditional comma. Let's assume that you have a whole table full of such parameter lists:
    CREATE TABLE InputStrings
    (keycol CHAR(10) NOT NULL PRIMARY KEY,
     input_string VARCHAR(255) NOT NULL);
    INSERT INTO InputStrings 
    VALUES ('first', '12,34,567,896'), 
     ('second', '312,534,997,896'),
     etc.
    This will be the table that gets the outputs, in the form of the original key column and one parameter per row.
    It makes life easier if the lists in the input strings start and end with a comma. You will need a table of sequential numbers -- a standard SQL programming trick, Now, the query, 
    CREATE VIEW ParmList (keycol, place, parm)
    AS
    SELECT keycol, 
           COUNT(S2.seq), -- reverse order
           CAST (SUBSTRING (I1.input_string
                            FROM S1.seq 
                             FOR MIN(S2.seq) - S1.seq -1) 
             AS INTEGER)
      FROM InputStrings AS I1, Series AS S1, Series AS S2 
     WHERE SUBSTRING (',' + I1.input_string + ',', S1.seq, 1) = ','
       AND SUBSTRING (',' + I1.input_string + ',', S2.seq, 1) = ','
       AND S1.seq < S2.seq
     GROUP BY I1.keycol, I1.input_string, S1.seq;
    The S1 and S2 copies of Series are used to locate bracketing pairs of commas, and the entire set of substrings located between them is extracted and cast as integers in one non-procedural step. The trick is to be sure that the right hand comma of the bracketing
    pair is the closest one to the first comma. The relative position of each element in the list is given by the value of "place", but it does a count down so you can plan horizontal placement in columns. 
    This might be faster now:
    WITH Commas(keycol, comma_seq, comma_place)
    AS
    (SELECT I1.keycol, S1.seq,
    ROW_NUMBER() OVER (PARTITION BY I1.keycol ORDER BY S1.seq)
    FROM InputStrings AS I1, Series AS S1
    WHERE SUBSTRING (',' + I1.input_string + ',' 
    FROM S1.seq 
    FOR 1) = ',' 
    AND S1.seq <= CHARLENGTH (I1.input_string))
    SELECT SUBSTRING(',' + I1.input_string + ','
    FROM C1.comma_place +1
    FOR C2.comma_place - C1.comma_place - 1)
    FROM Commas AS C1, Commas AS C2
    WHERE C2.comma_seq = C1.comma_seq + 1 
    AND C1.keycol = C2.keycol;
    The idea is to get all the positions of the commas in the CTE and then use (n, n+1) pairs of positions to locate substrings. The hope is that the ROW_NUMBER() is faster than the GROUP BY in the first attempt. Since it is materialized before the body of the
    query (in theory), there are opportunities for parallelism indexing and other things to speed up the works. 
    Hey, I can write kludges with the best of them, but I don't. You need to at the very least write a routine to clean out blanks, handle double commas and non-numerics in the strings, take care of floating point and decimal notation, etc. Basically, you must
    write part of a compiler in SQL. Yeeeech!  Or decide that you do not want to have data integrity, which is what most Newbies do in practice altho they do not know it. 
    >> but I do not know how to use this function in T-SQL for my favored result?  Please guide me how do I do this? <<
    Stop programming until you learn SQL. 
    --CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
    in Sets / Trees and Hierarchies in SQL

  • Using a function from another file

    Dear friends,
    I have two different java files in one folder. One is sm.java and the other is AVTransmit2.java. The code below describes the create Transmitter function in the AVTransmit2.java file. Now if i would like to use this function in sm.java, how do i do it ? The create transmitter function is shown below. Thank You, Gan.P
    private String createTransmitter() {
    // Cheated. Should have checked the type.
    PushBufferDataSource pbds = (PushBufferDataSource)dataOutput;
    PushBufferStream pbss[] = pbds.getStreams();
    rtpMgrs = new RTPManager[pbss.length];
    SessionAddress localAddr, destAddr;
    InetAddress ipAddr;
    SendStream sendStream;
    int port;
    SourceDescription srcDesList[];
    for (int i = 0; i < pbss.length; i++) {
    try {
    rtpMgrs = RTPManager.newInstance();
    // The local session address will be created on the
    // same port as the the target port. This is necessary
    // if you use AVTransmit2 in conjunction with JMStudio.
    // JMStudio assumes - in a unicast session - that the
    // transmitter transmits from the same port it is receiving
    // on and sends RTCP Receiver Reports back to this port of
    // the transmitting host.
    port = portBase + 2*i;
    ipAddr = InetAddress.getByName(ipAddress);
    localAddr = new SessionAddress(InetAddress.getLocalHost(),
    port);
    destAddr = new SessionAddress(ipAddr, port);
    rtpMgrs.initialize(localAddr);
    rtpMgrs.addTarget(destAddr);
    System.err.println( "Created RTP session: " + ipAddress + " " + port);
    sendStream = rtpMgrs.createSendStream(dataOutput, i);
    sendStream.start();
    } catch (Exception e) {
    return e.getMessage();
    return null;
    }

    Kalani and Bz,
    Thanks for the reply. Now i can call the function ,
    but when i write sendStream.start(); it indicates
    that, its an error. sendStream.start is in that
    function. but i cant call that
    Any idea ?
    thank you
    Gan.PCan you please inform what is the error ?

  • Using sql functions (min, max, avg) on varray or table collection

    Hi,
    I would like to know if there is a way to use sql function or oracle sql function like Min,Max, Avg or percentile_cont on varray or table collection ?
    Does anyone encountered this type of problem ?
    Thanks

    Yes you can apply Min,Max, Avg... if varray or table collection type is SQL (created in the databaase) UDF, not PL/SQL declared type:
    SQL> set serveroutput on
    SQL> declare
      2      type str_tbl_type is table of varchar2(4000);
      3      str_tbl str_tbl_type := str_tbl_type('X','A','D','ZZZ');
      4      max_val varchar2(4000);
      5  begin
      6      select max(column_value)
      7        into max_val
      8        from table(str_tbl);
      9      dbms_output.put_line('Max value is "' || max_val || '"');
    10  end;
    11  /
          from table(str_tbl);
    ERROR at line 8:
    ORA-06550: line 8, column 18:
    PLS-00642: local collection types not allowed in SQL statements
    ORA-06550: line 8, column 12:
    PL/SQL: ORA-22905: cannot access rows from a non-nested table item
    ORA-06550: line 6, column 5:
    PL/SQL: SQL Statement ignored
    SQL> create or replace type str_tbl_type is table of varchar2(4000);
      2  /
    Type created.
    SQL> declare
      2      str_tbl str_tbl_type := str_tbl_type('X','A','D','ZZZ');
      3      max_val varchar2(4000);
      4  begin
      5      select max(column_value)
      6        into max_val
      7        from table(str_tbl);
      8      dbms_output.put_line('Max value is "' || max_val || '"');
      9  end;
    10  /
    Max value is "ZZZ"
    PL/SQL procedure successfully completed.
    SQL> SY.

  • Hello, everybody, who know how to use the function READ_TEXT

    Hello , everybody,  I came across a program in which there is a function  READ_TEXT, what is it used for ? please specify the parameters  id object 
    . Thank you in advance, mate.
             Best regards                                                                               
    Frank
    CALL FUNCTION 'READ_TEXT'
          EXPORTING
        CLIENT                        = SY-MANDT
            id                            = '0207'
            language                      = sy-langu
            name                          = tmp_name
            object                        = 'VBBK'
        ARCHIVE_HANDLE                = 0
        LOCAL_CAT                     = ' '
      IMPORTING
        HEADER                        =
          TABLES
            lines                         = text_itab
         EXCEPTIONS
           id                            = 1
           language                      = 2
           name                          = 3
           not_found                     = 4
           object                        = 5
           reference_check               = 6
           wrong_access_to_archive       = 7
           OTHERS                        = 8

    Refer this link:
    http://help.sap.com/saphelp_nw04/helpdata/en/d6/0db764494511d182b70000e829fbfe/frameset.htm
    READ_TEXT provides a text for the application program in the specified work areas.
    The function module reads the desired text from the text file, the text memory, or the archive. You must fully specify the text using OBJECT, NAME, ID, and LANGUAGE. An internal work area can hold only one text; therefore, generic specifications are not allowed with these options.
    After successful reading, the system places header information and text lines into the work areas specified with HEADER and LINES.
    If a reference text is used, SAPscript automatically processes the reference chain and provides the text lines found in the text at the end of the chain. If an error occurs, the system leaves the function module and triggers the exception REFERENCE_CHECK.
    Function call:
    CALL FUNCTION 'READ_TEXT'
    EXPORTING CLIENT = SY-MANDT
    OBJECT = ?...
    NAME = ?...
    ID = ?...
    LANGUAGE = ?...
    ARCHIVE_HANDLE = 0
    IMPORTING HEADER =
    TABLES LINES = ?...
    EXCEPTIONS ID =
    LANGUAGE =
    NAME =
    NOT_FOUND =
    OBJECT =
    REFERENCE_CHECK =
    WRONG_ACCESS_TO_ARCHIVE =
    Export parameters:
    CLIENT
    Specify the client under which the text is stored. If you omit this parameter, the system uses the current client as default.
    Reference field: SY-MANDT
    Default value: SY-MANDT
    OBJECT
    Enter the name of the text object to which the text is allocated. Table TTXOB contains the valid objects.
    Reference field: THEAD-TDOBJECT
    NAME
    Enter the name of the text module. The name may be up to 70 characters long. Its internal structure depends on the text object used.
    Reference field: THEAD-TDNAME
    ID
    Enter the text ID of the text module. Table TTXID contains the valid text IDs, depending on the text object.
    Reference field: THEAD-TDID
    LANGUAGE
    Enter the language key of the text module. The system accepts only languages that are defined in table T002.
    Reference field: THEAD-TDSPRAS
    ARCHIVE_HANDLE
    If you want to read the text from the archive, you must enter a handle here. The system uses it to access the archive. You can create the handle using the function module ACHIVE_OPEN_FOR_READ.
    The value '0' indicates that you do not want to read the text from the archive.
    Reference field: SY-TABIX
    Default value: 0
    Import parameters:
    HEADER
    If the system finds the desired text, it returns the text header in this parameter.
    Structure: THEAD
    Table parameters:
    LINES
    The table contains all text lines that belong to the text read.
    Structure: TLINE
    Exceptions:
    ID
    The text ID specified in the parameter ID does not exist in table TTXID. It must be defined there together with the object of the text module.
    LANGUAGE
    The parameter LANGUAGE contains a language key that does not exist in table T002.
    NAME
    The parameter NAME contains the name of a text module that does not correspond to the SAPscript conventions.
    Possible errors:
    The field contains only blanks.
    The field contains the invalid characters ‘*’ or ‘,’.
    OBJECT
    The parameter OBJECT contains the name of a text object that does not exist in table TTXOB.
    NOT_FOUND
    The system did not find the specified text module.
    REFERENCE_CHECK
    The text module to be read has no text lines of its own but refers to the lines of another text module. This reference chain can include several levels. For the current text, the chain is interrupted, that is, one of the text modules referred to in the chain no longer exists.
    WRONG_ACCESS_ TO_ARCHIVE
    The exception WRONG_ACCESS_TO_ARCHIVE is triggered if an archive is accessed using an incorrect or non-existing archive handle or an incorrect mode (that is, read if the archive is open for writing or vice versa).
    Raja T

Maybe you are looking for

  • How to open only one clip at a time in the source monitor?

    Ok the answer to this question may be simple.. hopefully... At the moment each time I open a clip in the source monitor it adds it to the dropdown list. Fine... but I am opening and closing hundreds of clips in a day and after a while I noticed it se

  • What's the solution about data persistence in BPM?

    In some cases,data of completed processes need to be stored and reused in some applications.But in current BPM,I can't find where the data is stored and applications can't find interfaces to acquire these data.For example,if I want to check last mont

  • Save data from a presentation to the BPMObject without moving.

    Hi there! This is the actual problem. I have an interactive activity calling a presentation with the data from a BPMObject called Person. The fields are editable and the user can change them. What I want it's a button to save those changed fields int

  • PARK Invoice IDOC.

    Hi Folks, I have a requirement where I am required to post INVOICE01 IDOCs in my SAP system... the source data could come through PI.... I would like to know the steps for configuring this scenario. 1) The function module/process code to used to park

  • Displaying values in the table

    HI Team, I am trying to display 10 rows, with 3 cols in a table. but it is displaying only last row. this is the code is wrote. for(int i=1;i<=10;i++)      wdContext.nodeEmpDetails().invalidate();     wdContext.nodeEmpDetails().currentEmpDetailsEleme