Using NOT EXISTS to read from the same table.

Hi,
If I use the flwg SQL's:
select * from outstanding_balance
where dt_cats_date = '21,Nov 2005'
order by id_entity,id_object_type,id_object,id_payment_control ASC
select * from outstanding_balance
where dt_cats_date = '18,Nov 2005'
order by id_entity,id_object_type,id_object,id_payment_control ASC
Rows returned by the 1st is 15363
Rows retured by thr 2nd Query id 15325
ie difference of 38But,when I use the NOT EXISTS operator :
select *
from outstanding_balance ob1
where ob1.dt_cats_date = '21 Nov 2005'
and not exists (
select *
from outstanding_balance ob2
where ob2.dt_cats_date = '18 Nov 2005'
and ob2.id_entity = ob1.id_entity
and ob2.id_object_type = ob1.id_object_type
and ob2.id_object = ob1.id_object
and NVL(ob2.id_payment_control, -1) = NVL(ob1.id_payment_control, -1)
Rows Returned is 34.
Shouldnt this also return 38? Have I overlooked my NOT EXISTS somewhere?

Have you tried with NOT IN instead of NOT EXISTS? They really behave differently.
http://asktom.oracle.com/pls/ask/f?p=4950:8:16307188002894201762::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:442029737684
Jaffar

Similar Messages

How to read the hierarchy data from the same table using loop in AMDP method

Hi All,
We have a requirement to get the top partner from BUT050 table.
Here the Top parent is nothing but the top most in the hierarchy of the partners from BUT050.
Example:
For partner 1234 (BUT050-PARTNER1) there is partner 3523(BUT050-PARTNER2) one level above
For partner 3523(BUT050-PARTNER1) there is partner 4544 (BUT050-PARTNER2) last level .
so in this case for the partner 1234 the Top parent is 4544 .
I have created AMDP Procedure method to get the top-parnet and below given is the logic implemented in AMDP method.
Here i have implemented a recursive logic with the WHILE loop to get the top most hierarchy partner from the same table BUT050
IV_Parent is the input partner and ev_top_parent is the output value.
AMDP Procedure Method:
    DECLARE lv_date VARCHAR(8) := TO_VARCHAR (current_date, 'YYYYMMDD');
    DECLARE found INT := 1;
          iv_partner1 = SELECT partner1 FROM but050
                          WHERE partner2 = iv_partner
                          AND reltyp = :iv_hierarchy
                          AND date_to >= :lv_date
                          AND date_from <= :lv_date;
     WHILE found <> 0 do
       select partner1 into ev_top_parent from :iv_partner1;
                       iv_partner1 = SELECT partner1 FROM but050
                       WHERE partner2 in ( select partner1 from :iv_partner1 where partner1 is not null)
                       AND reltyp = 'ZBP004'
                       AND date_to >= :lv_date
                       AND date_from <= :lv_date;
       select COUNT ( partner1 ) INTO found FROM :IV_PARTNER1;
    END WHILE;
This method is working fine, but here it is only taking one single partner and getting the top parent as output.
Now i would like to convert this mehtod so as to accept n number of partners (not one single partner) as input and should process each partner to get the top parent.
Could anyone guide me how can i handle the given AMDP method further so as to work some how it is within another loop from other AMDP method.
Thanks.
Regards,
Laxman.P

Hi
Go to SE11 and enter the hierarchy table name.
/BIC/H....(infoobject name)...and execute the table and select table entry and delete all....
Thanks
TG

Using join and batch reading in the same query

Hi,
I wonder if it is possible to use "Joining" and "batch reading" in the same query.
For example I Have
A -> 1-1 B
A -> 1-1 B
B -> 1-M C
This is the case where I have two separate 1-1 relationships to the same class B from A. Toplink 10.0.3 can manage it nicely through joining.
Now, I would like to read a set of As (with its 2 Bs) and all Cs for each B.
It seems that the following configuration does not work:
A -> 1-1 B (use joining)
A -> 1-1 B (use joining)
B -> 1-M C (Batch read)
Any help would be greatly appreciated
Tony.

James,
Would you be so kind to look at the following code?
Am I formulating it correctly to achieve my desired behavior?
Trip.class -> 1-1 PickupStop
Trip.class -> 1-1 DropoffStop
PickupStop and DropoffStop extend Stop and use same table (STOP)
Stop -> 1-M StopEvents
I would like to fetch all Trips, with their Stops and all StopEvents in 2 queries:
1. Trip joined with Stop
2. Batchread StopEvents
Code:
ReadAllQuery raq = new ReadAllQuery(Trip.class);
Expression qexp1 = new ExpressionBuilder();
Expression qexp2 = new ExpressionBuilder();
raq.addJoinedAttribute("pickupStop");
raq.addJoinedAttribute("dropoffStop");
raq.addBatchReadAttribute(qexp1.get("pickupStop").get("vStopEvents"));
raq.addBatchReadAttribute(qexp2.get("dropoffStop").get("vStopEvents"));

How to compare two fields from the same table in the select statement

Hi, friends
I try to compare tow fields from the same table, but no result,
For example, this
data: cptotchek tyep i.
select count(*) into cptotchek
from aufk where erdat = aufk-idat2 .
The result is cptotchek = 0, but there are the records in aufk , where, aufk-erdat = aufk-idat2.
Please, help me, i don't use the loop statement for optimize my program.
Regards

Hi ,
       it will not return any value   when you are using   column of same table
       such as Date Field   , Because while Using Aggregate Function it will not check with self column
.      For that you have to take data in one internal table and then you can work on it .
     And if you are worried about Performance it will not affect , untill you are selecting only required data .
you can try this way .
data: cptotchek type i.
types : begin of w_aufk.
        include structure aufk .
      types : end of w_aufk .
data : it_aufk type standard table of w_aufk with header line .
select * into corresponding fields of table it_aufk
from aufk .
loop at it_aufk .
if it_aufk-erdat = it_aufk-idat2 .
write : / it_aufk-erdat , it_aufk-idat2 .
else .
delete it_aufk .
endif .
endloop.
Regards
Deepak.

How to update a table (CUSTOMER) on a Report Server with the data from the same table (CUSTOMER) from another server Transaction server?

I had an interview question that is:
How to update a table (Customer) on a server ex: Report Server with the data from the same table (Customer) From another server ex: Transaction server?
Set up steps so inset, update or delete operation takes place across the servers.
It would be great if someone please enlighten me in details about this process in MS SQL Server 2008 R2.
Also please describe would it be different for SQL Server 2012?
If so, then what are the steps?

I had an interview question that is:
How to update a table (Customer) on a server ex: Report Server with the data from the same table (Customer) from another server ex: Transaction server?
Set up steps so that inset, update or delete operation gets done correctly across servers.
I was not sure about the answer, it would be great if someone please put some light on this and explain in details about this process in MS SQL Server 2008 R2.
Also it would be very helpful if you please describe would it be different for SQL Server 2012? If so, then what are the steps?

Retrieve data from the same table

i have a table with following fields
emp_no,name,salary,department,dept_prev,prev_emp_no.
now i want retrieve emp_no,name,salary,department, from the data base for a perticular employeee number along with dept_prev
but dept_prev is the prev_emp_no dept_prev
now iam doing two query like this
first query to retreive name,salary,department
select name,salary,department from employee where emp_no = 10
second to retrieve the dept_prev from the same table but this
dept_prev must be based on prev_emp_no
select dept_prev from employee where emp_no in(select prev_emp_no from employee where emp_no =10)
can any one suggest to combine these two queries in a single sql statements, because all the fieldds are from the same table.
Thanks

Would this one solve it?
SELECT emp.NAME, emp.salary, emp.department,
       prev_emp.dept_prev
FROM employee emp,
       employee prev_emp
WHERE emp.emp_no      = 10
   AND prev_emp.emp_no = emp.prev_emp_no;
not tested
C.

SUM two fileds from different rows from the same table

I would like to SUM two fileds from different rows from the same table but I don't know how to do that.
E.g.
BillingTransactionsIndex      CreateDate      UserType      UserIndex      TransType      Reference      Total      Balance
2      6/5/2008 15:02      1      51      1      150      -288.2      -288.2
5      6/8/2008 11:55      1      51      1      157      -1.58674      -289.787
In the table above I want SUM fields Total and Balance for the first row and the the next row SUM 2nd row Total with 1st row Balance
Please help
Thanks

SQL> with tbl as
2 (select 1 as ID, 90 as total from dual
3          union all
4 select 2 as ID, 23 as total from dual
5          union all
6 select 3 as ID, 15 as total from dual
7          union all
8 select 4 as ID, 20 as total from dual)
9 select id , total, sum(total) over (order by ID) as balance from tbl
10 /
        ID      TOTAL    BALANCE
         1         90         90
         2         23        113
         3         15        128
         4         20        148
SQL>

Compare two results from the same table

i have two results from the same table that i would like to compare. below is my query and the results i want to compare
SELECT tblItemRoutingBOM.ItemRevID, tblItem.ItemID, tblItem.PartNum, tblItem.ItemName, tblItem.ManufacturerPartNum AS [Mfg Part#], tblItemRoutingBOM.Quantity
FROM tblItemRouting
INNER JOIN tblItemRoutingBOM ON tblItemRouting.ItemRoutingID = tblItemRoutingBOM.ItemRoutingID
INNER JOIN tblItem ON tblItemRoutingBOM.ItemID = tblItem.ItemID
WHERE tblItemRoutingBOM.ItemRevID in (61,70)
as you can see i am returning two records using the where clause
ItemRevID, ItemID, PartNum, ItemName, Manufacturer, Mfg Part#, Quantity
61,121,331503,.233 Aluminum Sheet,,1
70,121,331503,.233 Aluminum Sheet,,3
now what i am looking for is to combine these two together into one row with the following added. two columns for each QTY, QTY1 = 1 and QTY2 = 3 with a third column added that is the difference between the two QTY Diff = 2
Any thoughts?

Here are the two statements that i want to combine, results for each are attached
SELECT tblItem.ItemID, Sum(tblItemRoutingBOM.Quantity) AS SumOfQuantity, tblItem.PartNum AS [Part #],
tblItem.ItemName, tblManufacturer.ManufacturerName AS Manufacturer, tblItem.ManufacturerPartNum AS [Mfg Part#]
FROM tblItemRouting
INNER JOIN tblItemRoutingBOM ON tblItemRouting.ItemRoutingID = tblItemRoutingBOM.ItemRoutingID
INNER JOIN tblItem ON tblItemRoutingBOM.ItemID = tblItem.ItemID
INNER JOIN tblUnits ON tblItem.UnitID = tblUnits.UnitID
LEFT JOIN tblManufacturer ON tblItem.ManufacturerID = tblManufacturer.ManufacturerID
WHERE tblItemRoutingBOM.ItemRevID=61
GROUP BY tblItem.ItemID,tblItem.PartNum,tblItem.ItemName,tblManufacturer.ManufacturerName,tblItem.ManufacturerPartNum
SELECT tblItem.ItemID, Sum(tblItemRoutingBOM.Quantity) AS Quantity, tblItem.PartNum AS [Part #],
tblItem.ItemName, tblManufacturer.ManufacturerName AS Manufacturer, tblItem.ManufacturerPartNum AS [Mfg Part#]
FROM tblItemRouting
INNER JOIN tblItemRoutingBOM ON tblItemRouting.ItemRoutingID = tblItemRoutingBOM.ItemRoutingID
INNER JOIN tblItem ON tblItemRoutingBOM.ItemID = tblItem.ItemID
INNER JOIN tblUnits ON tblItem.UnitID = tblUnits.UnitID
LEFT JOIN tblManufacturer ON tblItem.ManufacturerID = tblManufacturer.ManufacturerID
WHERE tblItemRoutingBOM.ItemRevID=70
GROUP BY tblItem.ItemID,tblItem.PartNum,tblItem.ItemName,tblManufacturer.ManufacturerName,tblItem.ManufacturerPartNum
114,11,55002,Pepsi Blue Cap,NULL,
117,5,331501,Marigold Yellow For ABS,NULL,
121,1,331503,.233 Aluminum Sheet,NULL,
125,2,331504,Velvet Vinyl .008,NULL,
114,33,55002,Pepsi Blue Cap,NULL,
117,15,331501,Marigold Yellow For ABS,NULL,
121,3,331503,.233 Aluminum Sheet,NULL,
125,6,331504,Velvet Vinyl .008,NULL,
my returned result should combine above with two extra columns (two extra columns because i have two results to combine)
114, 11, 33, 22, 55002, Pepsi Blue Cap, NULL,
117, 5, 15, 10, 331501, Marigold Yellow For ABS, NULL
121,1, 3, 2, 331503, .233 Aluminum Sheet, NULL
125, 2, 6, 4, 331504, Velvet Vinyl .008, NULL
Columns go as such, ID, QTY1 (for 61), QTY2 (for 70), Diff (QTY1-QTY2), PartNum, ItemName, Mfg, Mfg Part#
IF the results from one of those two are empty then i would see something like this
114, 11, 0, 11, 55002, Pepsi Blue Cap, NULL,
117, 5, 0, 5, 331501, Marigold Yellow For ABS, NULL
121,1, 0, 1, 331503, .233 Aluminum Sheet, NULL
125, 2, 0, 2, 331504, Velvet Vinyl .008, NULL

Comparing totals from the same table

I am trying to compare data from the same table..
i am using an alias of the table to set up the select but i am running into a cartesian set.
I am comparing data (totals) from different dates from the same table ; i have included the query which is giving me a problem:
select a.date_in,b.date_in,a.Table_name,
DECODE(a.schema_name,
'EZLIVE','ITP','EZAC','ACT','OTHER')AS DEPT,
a.type,
a.status,
a.TOTAL,
b.total
from agg_results a,agg_results b
where a.schema_name=b.schema_name
and to_char(a.date_in,'mm/dd/yyyy')='&date_in'
and to_char(b.date_in,'mm/dd/yyyy')='&date_in';
any help thanks
Ellery

I think you need to join in-line views instead of the tables directly. something like:
SELECT a.date_in,b.date_in,a.table_name,a.dept,a.type,a.status,a.total,b.total
FROM (SELECT date_in,table_name,
             DECODE(schema_name,'EZLIVE','ITP',
                                'EZAC','ACT','OTHER') dept,
             type,status,total
      FROM agg_results
      WHERE date_in = to_date('&date_in','mm/dd/yyyy') a,
     (SELECT date_in,table_name,
             DECODE(schema_name,'EZLIVE','ITP',
                                'EZAC','ACT','OTHER') dept,
             type,status,total
      FROM agg_results
      WHERE date_in = to_date('&date_in','mm/dd/yyyy') b
WHERE a.dept = b.deptTTFN
John

Measure using UseRelationship not working well when sliced with attributes from the same table

Hi,
I have Measure created using the 'UseRelationship' Function, which uses a different datekey to link to the DateDim than the one the table is directly related by. The measure works as expected except in one scenario.
If I browse the measure using an attribute from the same fact table then the attribute is filtered using active relationship whereas the measure is filtered using the inactive relationship as shown below:
FACT(2 rows)(Active Relationship to Date using DateKey1)
SNo     DateKey1     DateKey2     Geo        Amt
1         20100101     20120101    India      100
2         20100101     20120101    US         200
AmtMeasure:=CALCULATE(SUM([Amt]),USERELATIONSHIP(FACT[DateKey2],'Date'[DateKey]))
If I browse the above measure in excel, with Year selected as 2012, I get 100+200=300. Now if I drag the Geo attribute against the measure I get 2 rows with 100 and 200.
If I do the same in a power view report I don't get any results after dragging the Geo attribute, whereas I get the correct value of 300 without the geo attribute. I checked the DAX query which the power view generates and figured this is being caused because
there are no rows in the table with DateKey1 having year 2012. I understand why this is happening this way in a DAX query and not in MDX, but shouldn't both behave in the same way and what is a work around.
Thanks,
Sachin Thomas

Sac, is this still an issue?
Thank you!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Calculating average time from two records from the same table.

Hi all
I need to calculate the average time between two events that are recorded in the same table.
The table is TMS_MESSAGE_AUDIT_LOG
MESSAGE_ID VARCHAR2(16 BYTE) NOT NULL,
MESSAGE_VERSION NUMBER(2) NOT NULL,
CREATE_TM VARCHAR2(18 BYTE) NOT NULL,
MESSAGE_STATUS VARCHAR2(30 BYTE),
TRANSACTION_TYPE_NM VARCHAR2(30 BYTE),
MESSAGE_TP VARCHAR2(3 BYTE),
WORKFLOW_OBJECT VARCHAR2(30 BYTE) NOT NULL,
WORKFLOW_REQUEST VARCHAR2(30 BYTE) NOT NULL,
WORKFLOW_RETURN_CD VARCHAR2(30 BYTE) NOT NULL,
AUDIT_ACTION VARCHAR2(255 BYTE),
LAST_UPDATE_USER_LOGON_ID VARCHAR2(12 BYTE),
LOCAL_TM VARCHAR2(18 BYTE) NOT NULL,
LOCAL_TIME_ZN_NM VARCHAR2(70 BYTE) NOT NULL,
LOCAL_DAYLIGHT_IN CHAR(1 BYTE) NOT NULL,
FPRINT VARCHAR2(30 BYTE)
What i now need is
When the MESSAGE_ID is the same i need have the average time between when the MESSAGE_STATUS is AA and BB ( I need the time out of the CREATE_TM field )
And this for every 15 minutes interval.
Because this table will become BIG millions and millions of records it needs to be fast.
Can anybody help me.
Marcel

Something like this?
CREATE TABLE wr_test
( message_id                 VARCHAR2(16 BYTE) NOT NULL
, message_version            NUMBER(2) NOT NULL -- Assumption: Acknowledged ver > Received ver
, create_tm                  VARCHAR2(18 BYTE) NOT NULL
, message_status             VARCHAR2(30 BYTE)
, transaction_type_nm        VARCHAR2(30 BYTE)
, workflow_object            VARCHAR2(30 BYTE) DEFAULT 'x' NOT NULL
, workflow_request           VARCHAR2(30 BYTE) DEFAULT 'x' NOT NULL
, workflow_return_cd         VARCHAR2(30 BYTE) DEFAULT 'x' NOT NULL
, audit_action               VARCHAR2(255 BYTE)
, last_update_user_logon_id VARCHAR2(12 BYTE)
, local_tm                   VARCHAR2(18 BYTE) NOT NULL
, local_time_zn_nm           VARCHAR2(70 BYTE) DEFAULT 'GMT' NOT NULL
, local_daylight_in          CHAR(1 BYTE) DEFAULT 'x' NOT NULL );
INSERT ALL
INTO   wr_test
       ( message_id
       , message_version
       , create_tm
       , message_status
       , local_tm )
VALUES ( message_id
       , 1
       , create_tm
       , '(Receive)'
       , TO_CHAR(local_tm,'YYYYMMDD HH24:MI:SS') )
INTO   wr_test
       ( message_id
       , message_version
       , create_tm
       , message_status
       , local_tm )
VALUES ( message_id
       , 2
       , create_tm
       , 'Wait CLSB Ack'
     , TO_CHAR
       ( local_tm + NUMTODSINTERVAL(DBMS_RANDOM.VALUE(0,2e5),'SECOND')
       , 'YYYYMMDD HH24:MI:SS' ) )
SELECT ROWNUM AS message_id
     , TO_CHAR(SYSDATE,'YYYYMMDD HH24:MI:SS') AS create_tm
     , DATE '2000-01-01' + DBMS_RANDOM.VALUE(0,3) AS local_tm
FROM dual CONNECT BY ROWNUM < 100000;
WITH src AS
     ( SELECT message_id
            , message_status
            , message_version
            , TO_DATE(SUBSTR(local_tm,1,17),'YYYYMMDD HH24:MI:SS') AS dt
            , TO_DATE(SUBSTR(local_tm,1,8),'YYYYMMDD') AS dt_day
            , TO_CHAR(TO_DATE(SUBSTR(local_tm,10,8),'HH24:MI:SS'),'SSSSS') AS dt_sec
       FROM   wr_test
       WHERE message_status IN ('(Receive)','Wait CLSB Ack') )
SELECT dt_day + NUMTODSINTERVAL(period,'SECOND') AS dt
     , NUMTODSINTERVAL(AVG(elapsed),'DAY') AS avg_elapsed
     , NUMTODSINTERVAL(MIN(elapsed),'DAY') AS min_elapsed
     , NUMTODSINTERVAL(MAX(elapsed),'DAY') AS max_elapsed
     , COUNT(*)
FROM   ( SELECT message_id
              , message_status
              , dt_day
              , TRUNC(dt_sec/300)*300 AS period
              , LEAD(dt) OVER (PARTITION BY message_id ORDER BY message_version) AS ack_dt
              , LEAD(dt) OVER (PARTITION BY message_id ORDER BY message_version) - dt AS elapsed
         FROM   src ) cal
WHERE cal.message_status = '(Receive)'
GROUP BY dt_day, period
ORDER BY 1;Replace "wr_test" with "tms_message_audit_log" in the WITH subquery to test on your data.

How to add column to report from the same table? Gives error now

Steps to reproduce:
Build a report on a table with easy report, select all columns
Add column to the table
Edit report and add column (one has to click Show Related Tables Only: No to view the same table!)
Report will give error as it will be build as
SELECT ... FROM table1, table1

AH HAAA!!!!
And I was afraid to convert from the "SQL (Structured Query)" to "SQL". Probably because I blew up my other reports...
Thanks!

Want to select individual data as well as aggregate data from the same table

want to select a, b from tab1 also need to find in the same table tab1 need to do sum(b) group by a

SELECT a,b,0 AS Ord
FROM tab1
UNION ALL
SELECT a,SUM(b),1
FROM tab1
GROUP BY a
ORDER BY a,Ord
assuming SQL Compact
If its SQL Server then we have much simpler methods
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

Print parent to child link or path from the same table

create table dummy(nodeid number, parentid number, nodename varchar2(20));
insert into dummy values(100,-1,'homegoods');
insert into dummy values(101,100,'kitchen');
insert into dummy values(102,101,'skillet');
select * from dummy gives:
nodeid     parentid   node_name
100         -1         HOMEGOODS
101         100       KITCHEN
102         101       SKILLETnote: parent id is the node id in the same table except for the top node.
select nodeid, nodename, 'i want complete path from parent to child here' as path from dummy where nodeid = 102
expected result
nodeid   name     path
102       skillet     homegoods>kitchen>skillethow can I do this ?
thanks

I thought it worked but I guess i am stuck in with real data . Please bear with me. I have never done hierarchical queries -
there are more ids and fields that I have to put in the condition so here are the new create/insert sample stmnts.
drop table dummy;
create table dummy(hdr_id number,node_id number, config_item_id number, parent_config_item_id number,ps_node_name varchar2(20));
insert into dummy values(35981400,     21400,     24547505,     -1,     'AT2200-10H');
insert into dummy values(35981400,     21420,     24547506,     24547505,     'AT2200-10H-UWMOD');
insert into dummy values(35981400,     37020,     24547564,     24547506,     'Corona Treater');
insert into dummy values(35981400,     37021,     24547565,     24547564,     'None');
insert into dummy values(35981400,     37024,     24547566,     24547506,     'Corona Type');
insert into dummy values(35981400,     1877321,25766779,     24547566,     'None');
select ps_node_name name,'path' from dummy where hdr_id = 35981400
--I have to have hdr_id=something as a condition as there are numerous rows with different ids.
so when I query for names in one hrd_id, I should get all names in that session, with paths linking parent to child upto current level.
expected result :
AT2200-10H
AT2200-10H-UWMOD        AT2200-10H>AT2200-10H-UWMOD
Corona Treater        AT2200-10H>AT2200-10H-UWMOD>Corona Treater
None                        AT2200-10H>AT2200-10H-UWMOD>Corona Treater>None
Corona Type        AT2200-10H>AT2200-10H-UWMOD>Corona Type
None                        AT2200-10H>AT2200-10H-UWMOD>Corona Type>None
sorry for the confusion.
Edited by: OAF-dev on Nov 18, 2009 4:24 PM

Using Notes and Oracle Client in the same application on Linux crashes

This thread is copied from a thread of the same name under Database - General, since I cannot get any replies there.
Could someone from Oracle PLEASE comment on this.
Our application on Linux loads the Notes client libraries and then the Oracle client libraries. The application will crashes when connectimg to an Oracle server. This is because the T_* symbols in libnnz11.so get fixed up into libnotes.so rather than locally into libnnz11.so where the functions are defined.
#10 0xb4779ea6 in T_malloc () from /opt/ibm/lotus/notes/libnotes.so
#11 0xae7ca050 in CMP_reallocNoCopy ()
from /opt/oracle/product/10.2/db_1/lib/libnnz11.so
#12 0xae7ccf7b in CMP_OctetStringToCMPInt ()
from /opt/oracle/product/10.2/db_1/lib/libnnz11.so
#13 0xae7c91fd in A_X931RandomInit ()
from /opt/oracle/product/10.2/db_1/lib/libnnz11.so
#14 0xaec09e0d in ztcriv ()
from /opt/oracle/product/10.2/db_1/lib/libclntsh.so.10.1
#15 0xaec09cef in ztcrbp ()
from /opt/oracle/product/10.2/db_1/lib/libclntsh.so.10.1
#16 0xaec09ca4 in ztcr2seed ()
from /opt/oracle/product/10.2/db_1/lib/libclntsh.so.10.1
#17 0xaec09c54 in ztcrseed3 ()
from /opt/oracle/product/10.2/db_1/lib/libclntsh.so.10.1
#18 0xaeb40683 in ztcsh ()
from /opt/oracle/product/10.2/db_1/lib/libclntsh.so.10.1
#19 0xaea631c4 in kpusattr ()
from /opt/oracle/product/10.2/db_1/lib/libclntsh.so.10.1
#20 0xaea7847e in OCIAttrSet ()
from /opt/oracle/product/10.2/db_1/lib/libclntsh.so.10.1
#21 0xb081cb9f in COCIObject::Connect ()
from /opt/criticalpath/common/bin/libor9i.so
We have circumvented the problem for the time being by making sure that we load the Oracle libraries before Notes, but we cannot go with that as a long term solution.
In my opinion the Oracle library is wrongly linked since all the T_* functions are defined in libnnz11.so. When we load Oracle first, the loader debug trace shows the correct fixups. When we load Notes first, the loader trace shows the incorrect fixups. We are using dlopen(libor9i.so, RTLD_LOCAL) for Oracle and dlopen(libnotes.so, RTLD_LOCAL) for Notes. libor9i.so has a dependency on libclntsh.so.10.1.
An opinion would really be appreciated.
Thanks,
John Unsworth

Thanks again.
We don't have an Oracle support contract because we do not use Oracle ourselves. We supply an application that synchronises data between multiple data servers and server types, of which Oracle is one and Notes is another, as well as LDAP servers and many other types.
Producing a full resolved binary is therefore not an option since the types of data server are configured when the apploication is installed, and then the client software for each server is loaded as required.
The end user of the application supplies the client libraries and has a support contract for the servers, in particular Oracle and Notes in this case. So the other option is for the end user to raise a ticket using his support contract, but he is reluctant to do that since he considers that this is our problem as we supply the application that is having the problem. So we are in a dead water area. We do not want to take out a support contract just to get what is an Oracle product problem resolved. I imagine that this problem is something that has not been encountered before, because our use of the client library in conjunction with other client libraries is probably unusual.
So that is why I am hoping, without any success so far, that someone from Oracle will pick this up.

Using NOT EXISTS to read from the same table.

Similar Messages

Maybe you are looking for