Using oDBDataSource.SetValue for date, price and percentage type

Hi experts,
I need to set value to db datasource for date, price and percentage type, below my code:
oDBDataSource.SetValue("U_ItemPrc", offset, oDataTable.GetValue("U_ItemPrc", i))
oDBDataSource.SetValue("U_Discount", offset, oDataTable.GetValue("U_Discount", i))
oDBDataSource.SetValue("U_Data", offset, oDataTable.GetValue("U_Data", i))
            mt.Columns.Item("ItemPrc").DataBind.SetBound(True, "@TC_LIS1", "U_ItemPrc")
            mt.Columns.Item("Discount").DataBind.SetBound(True, "@TC_LIS1", "U_Discount")
            mt.Columns.Item("Data").DataBind.SetBound(True, "@TC_LIS1", "U_Data")
            mt.LoadFromDataSource()
the column "U_ItemPrc" is a price with 5 decimals
the column "U_Discount" is a percentage with 2 decimals
the column "U_Data" is a date
I get the three matrix column blank!
How can I set value for these data type?
please help me.
Thanks
Best regards
Andrea

I modified the source code following your suggestion but i still have the same problem with db table field with decimal and date.
below the code:
Dim oDBDataSource As SAPbouiCOM.DBDataSource = form.DataSources.DBDataSources.Item("@TC_LIS1")
            oDBDataSource.Clear()
            mt.Columns.Item("LineId").DataBind.SetBound(True, "@TC_LIS1", "LineId")
            mt.Columns.Item("ItemCode").DataBind.SetBound(True, "@TC_LIS1", "U_ItemCode")
            mt.Columns.Item("ItemName").DataBind.SetBound(True, "@TC_LIS1", "U_ItemName")
            mt.Columns.Item("TipoList").DataBind.SetBound(True, "@TC_LIS1", "U_TipoList")
            mt.Columns.Item("ItemPrc").DataBind.SetBound(True, "@TC_LIS1", "U_ItemPrc")
            mt.Columns.Item("Discount").DataBind.SetBound(True, "@TC_LIS1", "U_Discount")
            mt.Columns.Item("Data").DataBind.SetBound(True, "@TC_LIS1", "U_Data")
            mt.Columns.Item("ItemDesc").DataBind.SetBound(True, "@TC_LIS1", "U_ItemDesc")
            For i As Integer = 0 To oDataTable.Rows.Count() - 1
                Dim offset As Integer = oDBDataSource.Size
                Dim prezzo As Double = oDataTable.GetValue("U_ItemPrc", i)
                Dim sconto As Double = oDataTable.GetValue("U_Discount", i)
                Dim data As Date = oDataTable.GetValue("U_Data", i)
                oDBDataSource.InsertRecord(i)
                oDBDataSource.SetValue("LineId", offset, oDataTable.GetValue("LineId", i))
                oDBDataSource.SetValue("U_ItemCode", offset, oDataTable.GetValue("U_ItemCode", i).ToString())
                oDBDataSource.SetValue("U_ItemName", offset, oDataTable.GetValue("U_ItemName", i).ToString())
                oDBDataSource.SetValue("U_TipoList", offset, oDataTable.GetValue("U_TipoList", i).ToString())
                oDBDataSource.SetValue("U_ItemPrc", offset, oDataTable.GetValue("U_ItemPrc", i))
                oDBDataSource.SetValue("U_Discount", offset, sconto)
                oDBDataSource.SetValue("U_Data", offset, data)
                oDBDataSource.SetValue("U_ItemDesc", offset, oDataTable.GetValue("U_ItemDesc", i).ToString())
            Next
            mt.LoadFromDataSource()
the prezzo variable store the correct value with decimal but executing the SetValue method I get the matrix column without decimal value.
the data variable store the correct value but executing the SetValue method I get the matrix column blank.
It seems the SetValue method works only for string field type.
What can i do?

Similar Messages

Is it mandatory to use Business object for data transfer and work flow?


<pre>
In our enterprise projects we deal with some screens where we add or update some data and again
we retrieve that data and display to user in various ways like displaying on screen as
a report or viewing in excel etc.. Most of the times, though we identify the business objects
based on the nouns in requirements document, really while implementing there will not be any
business logic in the objects. Almost all the objects which we identfy as business objects
may have methods like add, delete, update and retrieve methods. Still in these cases, is it required to
have business objects or can we use transfer object to send the data for saving and retriving or any other
pattern/guideline is there for dealing such cases?
I really appreciate your comments on this topic.
Also I apologize ahead of time if my explanation is not clear to you.
</pre>


Thanks in advance.

Regards,

Rizwan.

In my opinion, DAO pattern would be suitable for you. Generally the DAO (Data Access Object) will have the CRUD (create, read, update, delete) methods to retrieve data from data-source (e.g. database). Based on the data it will create the DTOs (Data Transfer Objects) and pass them to the caller. It will also receive the DTOs from the caller and save it the data-source. Thus in your case you can
- remove the CRUD methods from the Business Objects (BO) and make them pure DTOs and use them with DAOs (If you are using JDBC codes inside your application and you don't have much of validation or processing logic in your BOs).
http://www.corej2eepatterns.com/Patterns2ndEd/DataAccessObject.htm
OR
- use BOs in combination in DAOs (if using the database connection from a pool and BOs are having complicated processing logic).
http://www.corej2eepatterns.com/Patterns2ndEd/BusinessObject.htm

How to use the API for DATE, MONTH AND YEAR

I would like to use the java api in .util.calender in the java api to get the date.
How to implement the API for the "DATE","MONTH","YEAR" which are available provide by java?
can someone give me in one complete code?

From the Java Developers Almanac 1.4:
    Calendar cal = new GregorianCalendar();
    // Get the components of the date
    int era = cal.get(Calendar.ERA);               // 0=BC, 1=AD
    int year = cal.get(Calendar.YEAR);             // 2002
    int month = cal.get(Calendar.MONTH);           // 0=Jan, 1=Feb, ...
    int day = cal.get(Calendar.DAY_OF_MONTH);      // 1...
    int dayOfWeek = cal.get(Calendar.DAY_OF_WEEK); // 1=Sunday, 2=Monday, ...

HT1296 I was using the iCloud for my iPod and had recorded an important Voice Memo on the device. Before I was able to store it on my computer, the device stopped working. I have the data on the Cloud, how can I get that back to my iMac?

I was using the iCloud for my iPod and had recorded several irreplaceable Voice Memos. It went up to the Cloud, but I wasn't too savvy with the Cloud at that point, so it wasn't syncronizing to my home computer. So, the thing is that the iPod died and the backup is in the Cloud and I would like to load the backup to my iMac to recover my data. How can I do that? Thanks

The new device I got to replace the iTouch is a iPad and I don't see the playlist I created with previous voice memos on it at all. Is there any way to access them on the iPad? If I erase the iPad and restore it with the old back up will the Voice Memos come along and get in to my home computer or will I be out of luck?

HT204023 I am not able to set my Personal Hotspot setting, if I try to set it massage displayed "To enable Personal Hotspot for this account, contact carrier " I am in Oman and using Nawras service for data plan. Plz help me

I am not able to set my Personal Hotspot setting, if I try to set it massage displayed "To enable Personal Hotspot for this account, contact carrier " I am in Oman and using Nawras service for data plan. Plz help me. Before I was using this service but now facing problem.

Md Asad wrote:
Yes but they told mobile co mean Device 'iPhone co'
Sorry but that makes no sense in English. Only your mobile phone company (i.e. "carrier") can enable the Personal Hotspot feature.

Using different templates for the desktop and phone versions of the same blog

I have a site which was created in Adobe Muse and is hosted on Business Catalyst.
I have created both a desktop and a phone versions of the site.
I want to know how I can integrate the blogs that I currently have on the desktop site with the phone version that I just did, using different templates for the desktop and phone versions of the same blog. This is in order to ensure that visitors to the blogs on the website are directed to the templates that render correctly for the devices they are using.
My current approach has been to create both a desktop and phone versions of the blogs. The problem with this however, is that the dates are different and the comments are separated between the two blog versions!
I have also tried enabling mobile templates in BC, but still couldn't find a way to specify the mobile versions of the templates for the same blog?
To recap my problem, I basically need a solution where the same blog uses different templates for desktop and mobile (both templates use different navigation headings and menu styles)
Thanks.

There can be few reason for this, including page contents links or contents used in phone/tablet version.
Please provide the site url , also try to publish the site as a trial site in Business Catalyst with all layouts which would help to isolate the issue.
Thanks,
Sanjit

Can i use create function for MSSql scalar and table valude function.

Hi,
1) Can i use create function for MSSql scalar and table valued function?
2) How many type of user defined function are there in oracle 11g express?
3) And can i reture any "type" form user defined function?
yourse sincerely

944768 wrote:
Q1)That means even if i return predefined types like integer, varchar2 then also PGA is used ?The data type does not determine where the variable is stored. A string (called a varchar2 in Oracle) can be stored in stack space, heap space, on disk, in a memory mapped file, in a shared memory, in an atom table, etc.
It is the who and what is defining and using that string, that determines where and how it is stored.
The Oracle sever supports 2 languages in PL/SQL. The PL (Programming Logic) language is a procedural/declarative language. It is NOT SQL. SQL is integrated with it. The PL/SQL engine uses private process memory (PGA). So PL/SQL variables exist in the PGA (but there are exceptions such as LOBs).
Q2) So please suggest me solution in oracle.Sounds to me you are looking at how to implement a T-SQL style function as an Oracle function, and once implemented, do joins on the function.
Do not use PL/SQL in SQL in place of a SQL select. It is not T-SQL.
One cannot use PL/SQL to create functions along the style of T-SQL, where the function executes a SQL using some conditional logic, and then return as if the function was a native SQL select.
T-SQL is an extension to the SQL language - making it a hybrid and very impure language implementation. PL is based on ADA - part of the Pascal family of languages. The E-SQL (embedded SQL) approach used in languages like C/C++, Cobol and Ada, has been transparently done in PL/SQL. You can write and mix PL code and variables with SQL code. And the PL/SQL engine figures out how to make the call from the PL/SQL engine to the SQL engine.
But PL/SQL is not "part" of the SQL language and does not "extend" the SQL language in a T-SQL fashion.
So you need to check your SQL-Server preconcepts in at the door, as they are not only irrelevant in Oracle, they are WRONG in Oracle.
The correct way in Oracle, in a nutshell - Use the SQL language to do data processing. Use PL/SQL to manage conditional process flow and the handling of errors.

TS4036 I haven't used my ipad for several weeks and now it is locked and displaying 'This ipad hasn't been backed up in 2 weeks. Backups happen when this ipad is plugged in, locked, and connected to Wi-Fi'. I cannot do anything at all.

I haven't used my ipad for several weeks and now I can't do anything on it, it seems to be locked and I cannot unlock it. The screen just seems to be frozen with the following message 'This ipad hasn't been backed up in 2 weeks. Backups happen when this ipad is plugged in, locked, and connected to WiFi'. Help please!

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Using number datatype for date column

Hi
Is there a side effect for using "number" datatype for "date" column?
If so, what is the disadvantage?
Many thanks

Hi,
Ora_83 wrote:
Hi
Is there a side effect for using "number" datatype for "date" column?
If so, what is the disadvantage?Yes, there's a definite disadvantage.
Oracle provides date arithmetic and a number of functions for manipulating DATEs. None of them work with numbers.
For example,
SELECT    TRUNC (order_date, 'MONTH')     AS order_month
,       AVG (ship_date - order_date)     AS avg_delay
FROM       orders
GROUP BY TRUNC (order_date, 'MONTH')
;order_month involves a DATE function; it's pretty easy to find the month that conatins order_date.
avg_delay involves date arithmetic. It's extrememly easy to find how much the time passed between order_date and ship_date.
Depending on how you code dates as numbers, doing either one of the above may be just as easy, but doing the other will be very difficult. You'll waste a lot of effort converting the NUMBERs to real DATEs whenever you need to manipulate them.
Validation can be very difficult for NUMBERs, also.
Watch this forum. It's a rare day when there's not some question about how to get around a problem caused by storing dates in a NUMBER (or VARCHAR2) column. Don't add to that. Always use DATE columns for dates.

OS users for Data Service and Information Platform Service

Hello experts,
We will install SAP Data Server 4.2 Support Package 2 which required Information Platform Service to be installed before.
Can we use the same operating system user boadm for both software installation and maintenance.
Thanks & Best Regards,
Tong Ning

Hello Dirk Venken,
Thanks!
What is the best practice about the uses required for Data Service and IPS? (in one user or two different user.)
Regards,
Tong Ning

Hello ! pls give some ti[ps how to use bapi's for data uploading?

hello !
pls give some ti[ps how to use bapi's for data uploading?
regards,
Arjun

Hi,
See the below report extract:
where it_data is having uploaded data.
LOOP AT it_data INTO wa_data.
 line_count = sy-tabix.
 "Date Validation
 CONCATENATE wa_data-uplft_date4(4) wa_data-uplft_date2(2) wa_data-uplft_date+0(2)
 INTO wa_data-uplft_date.
 "READ TABLE it_ekko INTO wa_ekko WITH KEY lifnr = wa_data-vendor.
 LOOP AT it_ekko_temp INTO wa_ekko_temp WHERE lifnr = wa_data-vendor.
 IF wa_ekko_temp-kdatb <= wa_data-uplft_date AND wa_ekko_temp-kdate >= wa_data-uplft_date.
 MOVE-CORRESPONDING wa_ekko_temp TO wa_ekko.
 APPEND wa_ekko TO it_ekko.
 ENDIF.
 ENDLOOP.
 "IF sy-subrc = 0 AND wa_ekko-kdatb <= wa_data-uplft_date AND wa_ekko-kdate >= wa_data-uplft_date.
 LOOP AT it_ekko INTO wa_ekko.
 wa_data_header-pstng_date = wa_data-uplft_date.
 wa_data_header-doc_date = sy-datum.
 wa_data_header-bill_of_lading = wa_data-bill_of_lad.
 wa_data_header-ref_doc_no = wa_data-del_no.
 CONCATENATE wa_data-header_text1 '-'
 wa_data-header_text2 '-'
 wa_data-header_text3 '-'
 wa_data-header_text4
 into wa_data_header-HEADER_TXT.
 IF wa_data-indicator = 'Y'.
 wa_data_item-material = '000000000000200568'.
 ELSE.
 wa_data_item-material = '000000000000200566'.
 ENDIF.
 LOOP AT it_ekpo INTO wa_ekpo WHERE ebeln = wa_ekko-ebeln AND matnr = wa_data_item-material.
 "Collect Item Level Data
 wa_data_item-plant = '1000'.
 wa_data_item-stge_loc = '1001'.
 wa_data_item-move_type = '101'.
 wa_data_item-vendor = wa_data-vendor.
 wa_data-qnty = wa_data-qnty / 1000.
 wa_data_item-entry_qnt = wa_data-qnty.
 wa_data_item-po_pr_qnt = wa_data-qnty.
 wa_data_item-entry_uom = 'KL'.
 wa_data_item-entry_uom_iso = 'KL'.
 wa_data_item-orderpr_un = 'KL'.
 wa_data_item-orderpr_un_iso = 'KL'.
 wa_data_item-no_more_gr = 'X'.
 wa_data_item-po_number = wa_ekpo-ebeln.
 wa_data_item-po_item = wa_ekpo-ebelp.
 wa_data_item-unload_pt = wa_data-unload_pt.
 wa_data_item-mvt_ind = 'B'.
 APPEND wa_data_item TO it_data_item.
 CLEAR wa_data_item.
 ENDLOOP.
 CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
 EXPORTING
 goodsmvt_header = wa_data_header
 goodsmvt_code = goodsmvt_code
 testrun = 'X'
 TABLES
 goodsmvt_item = it_data_item
 return = return.
 READ TABLE return INTO wa_return WITH KEY type = 'S'.
 IF sy-subrc <> 0.
 DESCRIBE TABLE return LINES sy-tfill.
 IF sy-tfill = 0.
 CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
 EXPORTING
 goodsmvt_header = wa_data_header
 goodsmvt_code = goodsmvt_code
 testrun = ' '
 TABLES
 goodsmvt_item = it_data_item
 return = return.
 CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
 EXPORTING
 WAIT = 'X'
 IMPORTING
 RETURN =
 ENDIF.
 ENDIF.
 LOOP AT return INTO wa_return.
 WRITE: 'Messsage TYPE ', wa_return-type,
 /,'ID ', wa_return-id,
 /, 'Number ', wa_return-number,
 /, 'Message ', wa_return-message,
 /, 'Long Text ', wa_return-message_v1,
 wa_return-message_v2,
 wa_return-message_v3,
 wa_return-message_v4,
 /, 'Failed at line', line_count.
 ENDLOOP.
 CLEAR: wa_ekko, wa_ekpo, wa_data, it_data_item[], wa_data_header.
 ENDLOOP.
Reward if useful!

JDBC Thin Driver Support for Data Encryption and Integrity

Hello JDev Team,
I am trying to implement JDBC Thin Driver Support for Data Encryption and Integrity.
It works fine with java.sql.Connection and java.util.Properties like in the following code:
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
Properties props = new Properties();
int level = AnoServices.REQUIRED;
props.put("oracle.net.encryption_client", Service.getLevelString(level));
props.put("oracle.net.encryption_types_client", "( RC4_40 )");
props.put("oracle.net.crypto_checksum_client",Service.getLevelString(level));
props.put("oracle.net.crypto_checksum_types_client", "( MD5 )");
Connection conn = DriverManager.getConnection ("jdbc:oracle:thin:@localhost:1521:main", props);
etc...
But I am developing an application with InfoSwing components and it has a different way to connect to Oracle database using oracle.dacf.dataset.connections.Connection, like this:
sessionInfo1.setAppModuleInfo(new ModuleInfo("bc", "BcModule"));
sessionInfo1.setConnectionInfo(new LocalConnection("JDBCThin"));
sessionInfo1.publishSession();
My question is:
Is there any way to implement DataEncryption and Integrity into this type of connection?
Thanks a lot in advance.
Victor Bykov
null

Victor,
No, you can't do this from DAC, but I've been discussing it with the developer, and we both think this capability would be useful to have, so I've logged it as an enhancement request.
I do have a question for you. Once you've made the JDBC connection, do you need access to the Connection object afterwards? We're thinking of how the change could be implemented, and one way would be to allow you to pass in a Properties object when creating your own NamedConnection.
Thanks
Blaise

Using ALV Grid for data Input

Hi experts.
Can someone assist me with information on using ALV grid for data input. Please give a simple example if possible.
I am mainly interested in the part in which we can transfer data from the grid changing the internal table's data.

Try this code:
REPORT z_demo_alv_jg.
TYPE-POOLS *
TYPE-POOLS: slis.
INTERNAL TABLES/WORK AREAS/VARIABLES *
DATA: i_fieldcat TYPE slis_t_fieldcat_alv,
 i_index TYPE STANDARD TABLE OF i WITH HEADER LINE,
 w_field TYPE slis_fieldcat_alv,
 p_table LIKE dd02l-tabname,
 dy_table TYPE REF TO data,
 dy_tab TYPE REF TO data,
 dy_line TYPE REF TO data.
FIELD-SYMBOLS *
FIELD-SYMBOLS: <dyn_table> TYPE STANDARD TABLE,
 <dyn_wa> TYPE ANY,
 <dyn_field> TYPE ANY,
 <dyn_tab_temp> TYPE STANDARD TABLE.
SELECTION SCREEN *
PARAMETERS: tabname(30) TYPE c,
 lines(5) TYPE n.
START-OF-SELECTION *
START-OF-SELECTION.
Storing table name
p_table = tabname.
Create internal table dynamically with the stucture of table name
entered in the selection screen
CREATE DATA dy_table TYPE STANDARD TABLE OF (p_table).
ASSIGN dy_table->* TO <dyn_table>.
IF sy-subrc <> 0.
 MESSAGE i000(z_zzz_ca_messages) WITH ' No table found'.
 LEAVE TO LIST-PROCESSING.
ENDIF.
Create workarea for the table
CREATE DATA dy_line LIKE LINE OF <dyn_table>.
ASSIGN dy_line->* TO <dyn_wa>.
Create another temp. table
CREATE DATA dy_tab TYPE STANDARD TABLE OF (p_table).
ASSIGN dy_tab->* TO <dyn_tab_temp>.
SORT i_fieldcat BY col_pos.
Select data from table
SELECT * FROM (p_table)
INTO TABLE <dyn_table>
UP TO lines ROWS.
REFRESH <dyn_tab_temp>.
Display report
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
 EXPORTING
 i_callback_program = sy-repid
 i_structure_name = p_table
 i_callback_user_command = 'USER_COMMAND'
 i_callback_pf_status_set = 'SET_PF_STATUS'
 TABLES
 t_outtab = <dyn_table>
 EXCEPTIONS
 program_error = 1
 OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
*& Form SET_PF_STATUS
 Setting custom PF-Status
 -->RT_EXTAB Excluding table
FORM set_pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'Z_STANDARD'.
ENDFORM. "SET_PF_STATUS
*& Form user_command
 Handling custom function codes
 -->R_UCOMM Function code value
 -->RS_SELFIELD Info. of cursor position in ALV
FORM user_command USING r_ucomm LIKE sy-ucomm
 rs_selfield TYPE slis_selfield.
Local data declaration
DATA: li_tab TYPE REF TO data,
 l_line TYPE REF TO data.
Local field-symbols
FIELD-SYMBOLS:<l_tab> TYPE table,
 <l_wa> TYPE ANY.
Create table
CREATE DATA li_tab TYPE STANDARD TABLE OF (p_table).
ASSIGN li_tab->* TO <l_tab>.
Create workarea
CREATE DATA l_line LIKE LINE OF <l_tab>.
ASSIGN l_line->* TO <l_wa>.
CASE r_ucomm.
When a record is selected
 WHEN '&IC1'.
 Read the selected record
 READ TABLE <dyn_table> ASSIGNING <dyn_wa> INDEX
 rs_selfield-tabindex.
 IF sy-subrc = 0.
 Store the record in an internal table
 APPEND <dyn_wa> TO <l_tab>.
 Fetch the field catalog info
 CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
 EXPORTING
 i_program_name = 'Z_DEMO_PDF_JG'
 i_structure_name = p_table
 CHANGING
 ct_fieldcat = i_fieldcat
 EXCEPTIONS
 inconsistent_interface = 1
 program_error = 2
 OTHERS = 3.
 IF sy-subrc = 0.
 Make all the fields input enabled except key fields*
 w_field-input = 'X'.
 MODIFY i_fieldcat FROM w_field TRANSPORTING input
 WHERE key IS INITIAL.
 ENDIF.
 Display the record for editing purpose
 CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
 EXPORTING
 i_callback_program = sy-repid
 i_structure_name = p_table
 it_fieldcat = i_fieldcat
 i_screen_start_column = 10
 i_screen_start_line = 15
 i_screen_end_column = 200
 i_screen_end_line = 20
 TABLES
 t_outtab = <l_tab>
 EXCEPTIONS
 program_error = 1
 OTHERS = 2.
 IF sy-subrc = 0.
 Read the modified data
 READ TABLE <l_tab> INDEX 1 INTO <l_wa>.
 If the record is changed then track its index no.
 and populate it in an internal table for future
 action
 IF sy-subrc = 0 AND <dyn_wa> <> <l_wa>.
 <dyn_wa> = <l_wa>.
 i_index = rs_selfield-tabindex.
 APPEND i_index.
 ENDIF.
 ENDIF.
 ENDIF.
When save button is pressed
 WHEN 'SAVE'.
 Sort the index table
 SORT i_index.
 Delete all duplicate records
 DELETE ADJACENT DUPLICATES FROM i_index.
 LOOP AT i_index.
 Find out the changes in the internal table
 and populate these changes in another internal table
 READ TABLE <dyn_table> ASSIGNING <dyn_wa> INDEX i_index.
 IF sy-subrc = 0.
 APPEND <dyn_wa> TO <dyn_tab_temp>.
 ENDIF.
 ENDLOOP.
 Lock the table
 CALL FUNCTION 'ENQUEUE_E_TABLE'
 EXPORTING
 mode_rstable = 'E'
 tabname = p_table
 EXCEPTIONS
 foreign_lock = 1
 system_failure = 2
 OTHERS = 3.
 IF sy-subrc = 0.
 Modify the database table with these changes
 MODIFY (p_table) FROM TABLE <dyn_tab_temp>.
 REFRESH <dyn_tab_temp>.
 Unlock the table
 CALL FUNCTION 'DEQUEUE_E_TABLE'
 EXPORTING
 mode_rstable = 'E'
 tabname = p_table.
 ENDIF.
ENDCASE.
rs_selfield-refresh = 'X'.
ENDFORM. "user_command

I'm installing the new OS and iPhone is asking for a password to "restore" my iPhone, but I've never used a password for the phone and don't know what it is!

I'm installing the new OS and iPhone is asking for a password to "restore" my iPhone, but I've never used a password for the phone and don't know what it is! Can anyone help??

You selected Encrypt iPhone Backups in iTunes. Then you entered a password.
It would be that specific password it is asking for.
See here:
https://discussions.apple.com/thread/3284065?start=0&tstart=0

I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy

Using oDBDataSource.SetValue for date, price and percentage type

Similar Messages

Maybe you are looking for