Using old connection keys with CS4

I work for a web development company. Some of our clients use
Contribute for content management. In the office, we use Contribute
CS3 to create keys to send to the users. We had a user report that
no connection was created when they used a key we made in CS3. The
user just got Contribute, so I assume she purchased CS4. I looked
online and sent a support request to Adobe, but wondered if any of
you fine people have seen or heard anything like this. We don't
have CS4 yet, so I can't test this in house. I could download the
demo, but that's more work than I want to do, lol!
Thanks!

Unless the users can publish by themselves, you will have
issues when CS4 users submit drafts to CS3 admins.
Better upgrade soon.

Similar Messages

HT5633 use of fn key with Apple Wireless Keyboard MC184LL/B

Are the rules for using the fn key with the most recent
Apple Wireless Keyboard MC184LL/B posted anywhere on Apple's site? Thanks.

Unfortunately i don't have a solution to your issue, but I thought I would mention the same issue with the new keyboard (MC184LL/B) and the iPad 2 running ios 4.3.5. None of the function keys work as they should.
I recently received the older model (MC184LL/A) from FutureShop (Canada's sister to Best Buy) and everything works fine. Perhaps you should seek out and buy the older model before they are phased out.
My only concern in saying this is I hope the update to ios 5 does not cause the older model keyboard to suddenly lose function key performance. Similarly, I'm not sure the older model keyboard will work if you upgrade to Lion.
I called Apple support about this issue and they found some info on the same iPad forums I have read, but they had no inside scoop on whether the issue was going to be addressed in further ios (or Mac OS) updates.
If you want to keep your new keyboard, you might just have to wait and see if the issue is resolved.

HT1222 I am using old iphone 3G with capacity of 8GB memory, when ever I try to download any application it is telling it require newer version of software or iOS 4.3. can I get this software or not. Please advise.

I am using old iphone 3G with capacity of 8GB memory, when ever I try to download any application it is telling it require newer version of software or iOS 4.3. can I get this software or not. I even restore my all my software online, in that process I lost my contacts, photos, notes & mails stored & saved in my iphone. After that also no use, Please advise how and where can I get that.

Iphone 3g can only go to 4.2.1
Sorry

My hard drive & mother board had to be replaced, I am trying to setup my laptop & trying to re-sync but it will not let me use my old sync key, how do I reactivate using old sync key???

I have my old sync key, but it keeps saying that it is the wrong one every time I try to setup the sync option...how do I clear out what is currently on there so I can use my old sync key and get my original info back?

When you go to set up Sync - '''''I already have a Sync account''''', then in the next window use '''''I don't have the device with me'''''
As you type the Sync Key, don't type the hypens between the alpha / numeric characters.

I can't use some .avi files with CS4

I have 2 computers. One with W7 64 bits and PP CS5 and a laptop with Vista 32bits, so I had to install PP CS4 provided with Adobe CS5-5 production premium.
I have a problem with CS4 (as it works with my CS5): some.avi files are not read by CS4 as some other (.avi, .mp4, .m2ts) are read! I can install the file on the timeline, but only the sound is read, no pictures!
I'm not a specialist in computer, neither in Premire Pro, and my english is very bad (Yes, I know, I'm french...) ! Any idea of what to do, please ?
Thank you so much.

I agree with Jim. Knowing what is inside those AVI files, that are faulting, will likely tell the tale.
This article goes into a lot more detail on AVI (and MOV, etc.) as a "wrapper:" http://forums.adobe.com/thread/440037?tstart=0
It is what's inside, that matters. It might be as simple as just installing the proper CODEC, or it might be that the CODEC used, is a delivery-only CODEC, like DivX, Xvid, and some others.
Good luck, and please let us know a bit more.
Hunt

ModelReference value used as a key with output_text

I think that it would be good to enable the use of the modelReference value as a key with output_text, through an additional attribute.
Example : instead of corresponding to the actual description of a product, the modelReference value would be the key to the locale-sensitive description.
Wouldn't it be necessary to support this scenario ?
Thanks in advance.

This can be done through the renderer. If you have a convention for naming resource keys, the renderer can recognize the value is a key and look it up in a resource ...

Use old Java App with WinXP

We have an old app written with Java 1.0.2, designed to run on IE3.0.2.
We have need to use it but all our machines are WinXP Pro, running IE6/SP1. The app will not run on this configuration.
Is there a way we can use them? We are not Java programmers. Is there an app that will allow older stuff to run on newer technology?
Thanks
Paul P

I will bet the IE 3.02 will give you more problems than Java will. Check out Microsoft Developers Network (MSDN) http://www.msdn.microsoft.com/ to see what they have to say about IE.

How do I restore my bookmarks and favorites from the Firefox servers using my recovery key with a new hard drive?

I set up Firefox sync before getting a new hard drive. My understanding is that my favs and bookmarks would be stored on Firefox servers and could be synced to any of my devices.
However, now that I'm trying to restore to my new hard drive, it appears that I was supposed to sync previously with another device. I do not remember that explanation previously. I thought that my data was in the cloud and could be pulled at any time.
I have my recovery key. Can you help me?

I don't use Firefox sync, but my assumption was the same as yours. Have you tried the steps in the last part of this article?
[https://support.mozilla.org/en-US/kb/How%20to%20sync%20Firefox%20settings%20between%20computers#w_what-if-im-not-near-my-first-computer How to sync Firefox settings between computers > What if I'm not near my first computer?]
Do you still have access to your old hard drive, or a backup of your old hard drive? You often can retrieve your bookmarks, saved passwords, settings, add-ons, and so forth from that. If you have access, a volunteer here can describe the process in more detail.

How to use the command key with shortcuts/CS6?

Since ID2 I am using the combination Command+Escape to define a shortcut.
Buy this time Escape could not be tagged.
I was trying to remember if those years ago I modified escape key in some place (system preferences/keyboard) but neither could find a path to reconstruct this.
Also check the escape key in other shorcuts to avoid problem but no way.
Searched the forum but could not find something helpful
http://forums.adobe.com/message/2977659

[Jongware] wrote:
I guess that makes it an InDesign problem ...
Searching yesterday found it is an old topic, but not related to Adobe but to Apple: including thriller plots like that they are preserving the combination command+escape for future projects...
https://discussions.apple.com/thread/3438952?start=0&tstart=0
https://discussions.apple.com/thread/3569274?start=0&tstart=0
Also it has been resolved by programmers with very interesting formulae like the «Escape Key Liberator» (sic):
http://manytricks.com/blog/?p=1664
In my situation it was enough to reset the Apple Keyboard shortcuts...
Thank for your reply.

Can I use old Mac Pro with new iMac?

I have a Mac Pro (Pre 2007) running on 10.6.8 that is ok for now, but experiencing some degradation in performance. I have 4 drive bays full and memory maxed out. I am looking for a desktop solution that would allow the option to have the latest OSX (such as the latest iMac) and access this old Mac Pro still. Is this possible?
If so, what are some of the caveats?
SoftwareEx: CS6 is compatible with new OSX, but will files saved on new computer still be accessible on old computer?
Access to files
NetworkCurrently using older version of Airport Extreme for home office setup
Any insights would be helpful! I hate the thought of this old workhorse turning into nothing more than an external hard drive, but it is not upgradable to the new operating system.

It sounds like what you want to do is create a simple peer network so you can use the Mac Pro as a storage unit.
This is easy to do, just connect the two with an ethernet cable and log on using the logon and password for the system you want to access. In the general case, this is a bad idea since you you have unrestricted access but you own both machines so security is a very low priority.
Caveats:
     The OS version will determine what apps a machine can run.
     Data is just data as long as both systems use HSF+ or some other common file system.
     Airport may or may not work... but a hard wire will always get it done and transfers data a lot faster.
You almost never get to have it ALL your way when mixing generations of systems, but if you keep it simple it works well. I've had a peer network with 4-6 systems running in my house since the turn of the century. Most Macs support 1000 baseT (gigabit ether) so data transfers up to 80-90MB/sec are easy.

How do I use old data files with a new installation in Oracle 9i

I am in an unenviable position, with an unsupported database.
We are running Oracle 9i on Windows XP. We are upgrading soon to Oracle 11g on a newer platform, but need to get our development environment working first.
We lost a system that was running our development database without having a database export. The C drive was placed into a new system as the D drive.
I have loaded Oracle 9i on the C drive, but I have been unable to determine how to point it to the existing data files on the D drive. My search skills may be the limiting factor here...
We cannot simply load the drive as C, since the hardware is different.
What are the steps to point the new database software at the data files on the D drive? Or, how do I copy the old data files into the new Oracle Home and have them recognized properly?
Thanks for any advice.

user3930585 wrote:
I am in an unenviable position, with an unsupported database.
We are running Oracle 9i on Windows XP. We are upgrading soon to Oracle 11g on a newer platform, but need to get our development environment working first.
We lost a system that was running our development database without having a database export. The C drive was placed into a new system as the D drive.
I have loaded Oracle 9i on the C drive, but I have been unable to determine how to point it to the existing data files on the D drive. My search skills may be the limiting factor here...
We cannot simply load the drive as C, since the hardware is different.
What are the steps to point the new database software at the data files on the D drive? Or, how do I copy the old data files into the new Oracle Home and have them recognized properly?
Are you stating that you don't know how to use COPY command?
Can you recreate same directory structure on new C drive as exist on old C drive?
Can you then drag & drop copies of the files?

How can I use the Connection Pool with DB2

Hi All,
I am facing the problem with the usage for the Connection Pool.
I want to use DB2 via JNDI lookup.
But when starting the Weblogic server, Error occured with the following message.
<Error> <JDBC> <Cannot startup connection pool "MyJDBCPool" Cannot load driver class : com.ibm.db2.jdbc.app.DB2Driver>
DB2 and Weblogic are on the same machine.
In case of the use of remote DB2 database, I also encountered the same error.
Configurations are as follows.
<JDBCConnectionPool DriverName="com.ibm.db2.jdbc.app.DB2Driver"
MaxCapacity="10" Name="MyJDBCPool"
Password="{3DES}gCGsOfD9M6iwOtgL2v/NpA==" Targets="myserver"
TestConnectionsOnReserve="false" TestTableName="test" URL="jdbc:db2://localhost:6789/yongjoo"/>
<SNMPAgent Name="mydomain"/>
<JDBCDataSource JNDIName="acsdb" Name="acsdb" PoolName="MyJDBCPool" Targets="myserver"/>
Could you please give some information about this problem? I will appreciate your kindness.

Hi Joe,
Thanks your help.
Perhaps It's my fault for Weblogic console's setting.
After I reset the target server in console, Error message disappeared.
But, when I call the TestCode, I encountered another error message. The error
is NameNotFoundException.
When lookingup the JNDI name, NameNotFoundException errer occured. I tried to
change my setting and JNDI name, but the results are the same.
Would you please give me some information about this one more time? I will be
appreciated for your help.
Follows are Config.xml
<JDBCConnectionPool DriverName="com.ibm.db2.jdbc.app.DB2Driver" MaxCapacity="10"
Name="MyJDBCPool" Password="{3DES}gCGsOfD9M6iwOtgL2v/NpA==" Targets="myserver"
TestConnectionsOnReserve="false" TestTableName="test"
URL="jdbc:db2://localhost:6789/yongjoo"/> <SNMPAgent Name="mydomain"/>
<JDBCDataSource JNDIName="acsdb" Name="acsdb" PoolName="MyJDBCPool"
Targets="myserver"/>
and follows are TestCode,
url = "t3://localhost:7001"; //default URL
datasource = "jdbc/acsdb";
Context ctx = null;
Hashtable p = new Hashtable();
p.put(Context.INITIAL_CONTEXT_FACTORY,
"weblogic.jndi.WLInitialContextFactory");
p.put(Context.PROVIDER_URL, url);
try{
ctx = new InitialContext(p);
System.err.println("initialContext(p)"+ctx); <-- success
ds = (DataSource)ctx.lookup("java:comp/env/jdbc/acsdb");
}catch(NameNotFoundException ne){
throw new ConnectionException(); .
}catch(NamingException ne){
throw new ConnectionException();

How to use old archieve logs with a new control file

Environment:
ORACLE_BASE="/export/home/oracle"
ORACLE_HOME="/export/home/oracle/product/8.1.6"
NLS_LANG=".UTF8"
2 partitions:
i) /data1 -- contains important datafiles (OS striping on 3 hard
disks)
ii) /export/home -- contains the oracle program, and SYS/SYSTEM
datafiles
Problem:
-/data1 cannot be read/mount (damaged)
-oracle failed
Action Performed:
-reinstalled OS
-mount /export/home successfully (all oracle system files,
instance init files exist)
-/data1 is an empty partition
-created the oracle user, and its groups
-chown recusively for the $ORACLE_BASE directory
-set all the oracle environment variables
-attempted to start the instance, but failed due to a control
file was
missing
-since control files were set to be mirrored, i copied a control
file somewhere
from /export/home/oracle/oradata/<SID>/control1.ctl to
/data1/oracle/oradata/<SID>/control2.ctl (i.e. have them back to
their original locations)
-the instance failed to start as well, since the datafile set in
the control files couldn't be found
-this forced me to re-create the control file... b4 i re-create
a new control file, i backed up the old one
-once the control file was created, the database can be started,
but, to oracle, all achieve log information are lost (although
the achieve log's physical files r still there)
-i imported the important data from a dump file that was
exported a week ago b4 the system failure
-since we r using the new control file, the redo logs switch
contains no achieve log information that the old control file
has, so running "recover database" doesn't do anything
Purpose:
since the dump file is a week old, i'd like to get the data
after my last export and b4 the system failure. the database was
run in arhieve log mode, how can i recover those data with the
new control file
Question:
-how can we create a new control file that can drive the old
achieve logs?
-can we convert the achieve log data (.dbf format) into text
format?
-can we still use the old control files to start the database?
-what's a suggested solution if we'd like to re-construct the
database up to the moment b4 the system failure in another
server?
thx

user3930585 wrote:
I am in an unenviable position, with an unsupported database.
We are running Oracle 9i on Windows XP. We are upgrading soon to Oracle 11g on a newer platform, but need to get our development environment working first.
We lost a system that was running our development database without having a database export. The C drive was placed into a new system as the D drive.
I have loaded Oracle 9i on the C drive, but I have been unable to determine how to point it to the existing data files on the D drive. My search skills may be the limiting factor here...
We cannot simply load the drive as C, since the hardware is different.
What are the steps to point the new database software at the data files on the D drive? Or, how do I copy the old data files into the new Oracle Home and have them recognized properly?
Are you stating that you don't know how to use COPY command?
Can you recreate same directory structure on new C drive as exist on old C drive?
Can you then drag & drop copies of the files?

Using old wall charger with new iPod Classic

I just got a new 80Gb iPod Classic to replace my old original 20Gb model. Can anyone tell me if the wall charger that came wiht the older model will work to charge the newer one?

Yes, it should work just fine. I'm still using the AC adapter and firewire cable from my 60 gig iPod Photo to charge my Touch, 3rd gen Nano and 60 gig iPod with Video.

Using old AC adapter with 5G iPod

I wouldn't think there's a problem with this, but just to be on the safe side, is there any danger in using my old firewire cable and AC adapter with the new iPod? I hate using the computer to charge it, and I've already got two of the old adapters.

It'll work fine. You just can't sync with firewire

Using old connection keys with CS4

Similar Messages

Maybe you are looking for