Using Oracle to Oracle Datapump KM in ODI

Hi,
I am trying to use datapump to speed up the ODI execution. It works when I use it to move data across two schemas in the same database. However it fails to move data across different databases. When I looked a little into the problem I realized that the .exp file which gets created at source does not move to the target side. Since the ODI tries to read the file in the target and doesn't find one, it complains. How can I refer to the .exp file that was created at source from the ODI. Or is there a more elegant solution? Any help is greatly appreciated.
Thanks.

Hi CTS,
Thanks for your prompt response. My development landscape is as under.
Machine A: Source
Machine B: Agent
Machine C: Target.
My line of thought was it is the inherent behavior of the KM to be able to reference the .exp file through dataservers and bring the same to the target side. Now, the extraction (unloading data into an external table at source) works fine. The loading of data into the target, however, snaps because the target database has no way to read the .exp file which is still at the source. The target expects the file to be located in the local file system.
I presumed that the KM would have the intelligence of moving the file to the target built into it, which unfortunately is not the case. So, will I have to transfer the file using FTP so that it is available at the target as well? Is there a better alternative that you can think of?
Any help is appreciated.
Thanks

Similar Messages

Error in import table data using oracle datapump

i am trying to import table data using oracle datapump
CREATE TABLE emp_xt (
ID NUMBER,
NAME VARCHAR2(30)
ORGANIZATION EXTERNAL (
TYPE ORACLE_DATAPUMP
DEFAULT DIRECTORY backup
LOCATION ('a.dmp')
it return the following error
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04084: The ORACLE_DATAPUMP access driver does not support the ROWID column.
ORA-06512: at "SYS.ORACLE_DATAPUMP", line 19
please help me

.dmp file generated from exp command file not from oracle_datapump

Biometric applications integration using Oracle stack

How do we integrate Biometric applications using Oracle SOA Suite or ODI or any other technology?
Thanks in advance.

Hi,
I found this document from the Oracle Open World 2009 (maybe you have found it too) :
"Integration with PeopleSoft applications using oracle soa suite 11g BPEL" --> [http://www.oracle.com/technology/tech/fmw4apps/peoplesoft/pdf/oow2009-bpel-psft.pdf]
And this could be a little more simple, but have a good step-by-step tutorial.
[http://www.oracle.com/technology/obe/fusion_middleware/fusion/soa/BPEL_PS848/OBE_PSFT_BPEL_848.htm]
I think you must read this docs by now, but never come amiss.
Hope this can help you,
By the way, if you can help me with this I'll appreciate it a lot.
Unable to access the following endpoint(s)

Error while using Oracle Table as source file :- ODQ for ODI

Hi All,
I am getting some errors while working on ODQ with Oracle Tables as source file.
If I am trying with text files (*.txt) as source and output it works fine.
Please let me know how we can connect to an oracle table which is my source file.
In the exported project -> “settings” folder
In the file named eN_transfmr_pXX.stx
For
/CATEGORY/INPUT/PARAMETER/INPUT_SETTINGS/ARGUMENTS/EN
TRY/DATA_FILE_NAME=
What I need to give? (URL – source file)
I tried with
1. jdbc:oracle:thin:@xxx.xxx.x.xx:1521:ORCL
2. jdbc:oracle:thin:UserName/Password@// xxx.xxx.x.xx:1521:ORCL
i am not sure , is there any thing missing ???
(Note: for text file I am giving “D:\Sourcefolder\customer.txt”)
If I am running the batch file directly from CMD Prompt it’s displaying the error message
“Cannot open file”
If I am connecting with ODI it’s displaying the error
com.sunopsis.dwg.function.SnpsFunctionBaseException: OS command returned 3503. …………………….
Thanks in advance…
Rathish A M

Hi Ratish,
ODQ supports files as inputs not Oracle tables, what you should do is:
- define an ODQ process that takes a file as an input.
- create an ODI process that dumps your Oracle table into a file that will be used by ODQ. (interface or OdiSqlUnload step)
- run the ODQ process in ODI (in a package)
- create an ODI interface that will load your ODQ output file into a DB.
You can profile Oracle tables directly using Oracle Data Profiling.
Thanks,
Julien

How to use oracle fusion middleware for integration project ?

hi all,
in my projects, customer (a bank) already has many applications (bankend & frontend) that are complicatedly connected. I intend to use oracle fusion middleware to integrate all applications and make adding new applications in the future easier. I have worked through documents in the oracle website but I still have no idea how to use oracle fusion middleware to address the requirement, besides oracle fusion middleware includes a bundle of applications I don't know which one I would need.
could anyone give me some instructions ? appreciate your help.
thank very much,

Hi,
For this short description of environment, could be ODI is a incredible tool to help you...
Take a look into my blog that has a lot of concepts and "how to do" instructions.... http://odiexperts.com
However to try help you, what are the used technologies?
Where are you from?
Cezar Santos
http://odiexperts.com

How I can set ORG_ID context (for Oracle Apps Views) in ODI designer tool?

Hi All,
I want to get data from apps views (like OE_ORDER_HEADER_V) into our data warehouse detination table using ‘Oracle Data Integrator’ tool.
The issue is that when I reverse Oracle Table or Synonym directly, everything works fine i.e. after 'Interface' execution, I can see how many rows imported into destination table from this source Oracle table/synonym.
But when I use Apps view as a source then 'Interface' executes fine with ‘no error’ but NO rows imports to the destination table.
I believe, the only difference is that I am not able to set Org_Id before executing ODI interface so it is not picking the data.
Please let me know the steps/instructions to set org_id context on apps view then reverse in ODI Designer tool.
Please note that I can set org_id using SQLPlus successfully as given below (and see data using the same Apps view). What to do in ODI designer tool to achieve similar data:
begin
fnd_global.apps_initialize(0, 21623, 660);
mo_global.init('ONT');
end;
-- connect using apps/apps at Vision SQLPlus
-- User_Id -> 0 (<-- SYSADMIN )
-- Responsibility_Id-> 21623 (<-- Order Management Super User )
-- Application_id -> 660 (<-- ONT )
-- select count(*) from oe_order_headers_v where rownum < = 100
I would appreciate your quick help in this.
Thanks in advance.

Set org context in 11i:
===============
The SQL command to set the ORG_ID prior to running a script is:
SQL> execute dbms_application_info.set_client_info(&org_id);
Enter the org_id when prompted.
If using Toad
Begin
fnd_client_info.set_org_context(&org_id);
End;
Set org context in R12
================
The SQL command to set the ORG_ID prior to running a script is:
SQL> exec mo_global.init('AR');
exec mo_global.set_policy_context('S','&org_id');
Enter the org_id when prompted.
The procedure - mo_global.set_policy_context has two parameters
p_access_mode & p_org_id
p_access_mode Description
S In case you want your current session to work against Single ORG_ID
M In case you want your current session to work against multiple ORG_IDs
p_org_id: Only applicable if p_access_mode is passed value of "S"
If using Toad
Begin
mo_global.set_policy_context(‘S’, &org_id);
End;

How to use Oracle refcursor dataset output parameter from SP

Can I request for help on how to use Oracle Output parameter from a stored procedure as a source. I need the output tobe stored in a flat file
Thanks
Abhijit
Message was edited by:
Abhijit77

yes I would like to use it for ODI.. I would like the ouput of the refcursor to be fed to a text file using ODI. How to handle the records returned by the refcursor and map with txt file.

Oracle db issue - with ODI

Hi ,
I used oracle as Relational DB for ODI, At first time when I am configuring it is fine , let when I restart my computer ..it is unable to connect .
The error I am getting is
java.sql.SQLException: Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
The Connection descriptor used by the client was:
localhost:1521:hyperion
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:280)
     at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:328)
     at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:361)
     at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:151)
     at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
     at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:595)
     at com.sunopsis.sql.SnpsConnection.u(SnpsConnection.java)
     at com.sunopsis.sql.SnpsConnection.c(SnpsConnection.java)
     at com.sunopsis.sql.i.run(i.java)
From the error I believe its the issue with Oracle db port number, Here hyperion is SID,
now how to check the listener port number, if it is varying then how to make the portnumber static.
how to reslove this issue.
Thank You

Are you sure the oracle listener is up and running.
You could try the following from command line
tnsping <net service name>
Cheers
John
http://john-goodwin.blogspot.com/

Error while creating a report that uses Oracle OCI JDBC connectivity

Please let me know why my CR and LF characters are removed from my forum posting *****
Hi,
I was trying to create a report that uses Oracle OCI JDBC connectivity. I am using Eclipse3.4 download from "cr4e-all-in-one-win_2.0.2.zip". I have successfully created a JDBC OCI connection.
The connection parameters are given below:
URL: jdbc:oracle:oci8:@xe
Database: xe
username: <userName>
password: <password>
I have tested the above connection in Data source Explorer and it works fine!!!
But I am getting the following error when I drag-and-drop a table from the list of tables. Not sure what I am missing here? Any help is highly appreciated.
com.businessobjects.reports.jdbinterface.common.DBException: InvalidURLOrClassName
     at com.crystaldecisions.reports.queryengine.driverImpl.jdbc.JDBCConnection.Open(Unknown Source)
     at com.crystaldecisions.reports.queryengine.JDBConnectionWrapper.Open(SourceFile:123)
     at com.crystaldecisions.reports.queryengine.Connection.br(SourceFile:1771)
     at com.crystaldecisions.reports.queryengine.Connection.bs(SourceFile:491)
     at com.crystaldecisions.reports.queryengine.Connection.t1(SourceFile:2979)
     at com.crystaldecisions.reports.queryengine.Table.u7(SourceFile:2408)
     at com.crystaldecisions.reports.dataengine.datafoundation.AddDatabaseTableCommand.new(SourceFile:529)
     at com.crystaldecisions.reports.common.CommandManager.a(SourceFile:71)
     at com.crystaldecisions.reports.common.Document.a(SourceFile:203)
     at com.businessobjects.reports.sdk.requesthandler.f.a(SourceFile:175)
     at com.businessobjects.reports.sdk.requesthandler.DatabaseRequestHandler.byte(SourceFile:1079)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.do(SourceFile:1163)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(SourceFile:657)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:163)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(SourceFile:525)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(SourceFile:523)
     at java.util.concurrent.FutureTask$Sync.innerRun(Unknown Source)
     at java.util.concurrent.FutureTask.run(Unknown Source)
     at com.businessobjects.crystalreports.designer.core.util.thread.ExecutorWithIdleProcessing$3.doWork(ExecutorWithIdleProcessing.java:182)
     at com.businessobjects.crystalreports.designer.core.util.thread.AbstractCancellableRunnable.run(AbstractCancellableRunnable.java:69)
     at com.businessobjects.crystalreports.designer.core.util.thread.PriorityTask.run(PriorityTask.java:75)
     at com.businessobjects.crystalreports.designer.core.util.thread.PriorityCompoundCancellableRunnable.runSubtask(PriorityCompoundCancellableRunnable.java:187)
     at com.businessobjects.crystalreports.designer.core.util.thread.PriorityProgressAwareRunnable.runSubtask(PriorityProgressAwareRunnable.java:90)
     at com.businessobjects.crystalreports.designer.core.util.thread.PriorityCompoundCancellableRunnable.doWork(PriorityCompoundCancellableRunnable.java:144)
     at com.businessobjects.crystalreports.designer.core.util.thread.AbstractCancellableRunnable.run(AbstractCancellableRunnable.java:69)
     at com.businessobjects.crystalreports.designer.core.util.thread.ExecutorWithIdleProcessing$IdleTask.run(ExecutorWithIdleProcessing.java:320)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Thanks
Karthik
Edited by: KARTHIK1 on Oct 14, 2009 9:38 PM

Hi Ted,
Thanks for the feedback. I was able to create a report in Creystal Reports Designer 2008 using OCI. It is not allowing only in the Eclipse plugin. In our environment we are not allowed to user Oracle thin connections and ONLY OCI is allowed.
1) Can you please let me know if there is a way to do this?
2) Will it allow data sources using native database driver?
3) If so, can I use JRC to create these reports from a desktop java program?
Thanks & Regards
Karthik
Edited by: KARTHIK1 on Oct 15, 2009 4:38 PM

Help needed in using oracle rules SDK

Hi,
For testing my rulesets using oracle rules SDK I doing the following:
1. Creation of dictionary, ruleSet.
2. Declared two kinds of globalVariable variables in my datamodel :
Final and non-Final.(Type of these varaibles are String and Double only)
3. Final globalVaraibles are used in creating rule's patterns.
4. Non-Final globalVariables are used in creating rule's action.
5. Functions are created for asserting globalVariables values and
returning non-final varaibles, since those are required as action
results.
6. In java code I am testing my ruleset (dict.testRuleSet()). Before
testing i am populating my final global variables (since these are used
in rule's patterns),
and updating datamodel.
The above procedure is working fine and I rules are successfully working.
Now, first of all i want to know if the above mentioned approach is correct or it needs to be reframed??
secondly, when i update datamodel with values (in java code itself) it
takes 4-5 seconds in updating it. This is the main issue that why it is
taking this much time??
any comment would be of great help.
Thanks in advance.

I will send up an alert for you, Colin. Even though I use iTunes for Mac, troubleshooting it isn't my forté.

Compiling Apache 1.3.9 & PHP 3.0.12 to use Oracle 8.1.5 on SuSe 6.2

Hi!
I am trying to compile the above packets but am running into massive problems.
PHP3 compiles well, if i try to use the "normal" static module for Apache, but the Apache configure script says that it needs an ANSI C compiler and stops.
I am using GCC 2.7.2.3 with the bugfixes from SuSe.
Since that did not work I tried the configuration as a Dynamic Module. The Apache "Readme.config" explains two ways to do so, but the first has the same problem with GCC and the second (via APXS) compiles Apache without problems, but PHP3 wont compile since it does not find a library. The exact error is: "/usr/i486-linux/bin/ld: cannot open -lclntsh: No such file or directory"
I found a libclntsh.so.8.0 in the oracle/lib directory, but since i fumbled around with this library (i tried ln -s libclntsh.so.8.0 libclntsh.so) sqlplus says libclntsh.so.8.0: cannot find file data: no such file or directory (even now that the link is deleted again).
And PHP still wont compile. Any ideas would be welcome.
P.S.: Is it normal that Oracle has to be told NOT to create a database during install, TO create a database???
We worked for 3 days on the Oracle installation and that was the only way to install Oracle without errors.
thx
Uwe Schurig

Lee Bennett (guest) wrote:
:Hi
:I have successfully installed Oracle 8.1.5 Enterprise edition
on
:Suse 6.2 and applied the 8.1.5.0.1 patch set,
NO!
SuSe 6.2 have a patch file for Oracle made from their developers.
Never use Oracle 8.1.5.0.1 patch file that doesn't work because
us bugged.
Use SuSe 6.2 Oracle patch set.
(don't remember the web page where you can download it but a
search with word "oracle" from SuSe homepage will lead you to
it)
-Stefano
null

SSO and how to Managing User Roles/Privileges with Forms using Oracle db

We are in the process of implementing Oracle Application Server SSO with our custom Forms application using Oracle database -- all 10.2.0.1.0 version.
In our Forms Applications, we have about a dozen roles we have assigned to various users. We need to identify each user using our Forms because we are using the GLOBAL USER throughout the application.
Questions:
-- Do we have to create users/passwords in both OID and application database?
-- Is there a way to easily manage the user and passwords between SSO and Forms App/database in one place? For example, how does a user change their password once, but actually change it in both the database and SSO?
Any advice and/or direction would be greatly appreciated.
Thank you,
Mika
Edited by: user11846198 on Sep 1, 2009 1:41 PM
Edited by: user11846198 on Sep 1, 2009 1:53 PM

Yes, you can have global roles in the DB and assign this roles to specific OID users, and the will heritage the privilages, you can do this using Oracle Identity Management Web Tool http://hostname:7777/oiddas is not complicated.
Greetings.

Does sun Cluster 3.0/3.1 HA Oracle agent support to use Oracle spfile?

When defining the resource, the 'parameter_file' properties is usually sets to the Oracle pfile. Is it possible to use Oracle spfile?
It is said if leaving 'parameter_file' NULL, it will be default to Oracle default. Suppose leaving it NULL and with Oracle spfile created in default location, will it use the spfile?

You did not specify which Sun Cluster version and Oracle version you are running.
Within SC 3.1 my understanding is that beginning with Oracle 9i it is possible to use the spfile.
If you leave the "parameter_file" property empty (NULL) then the default behaviour for 9i should work:
search under $ORACLE_HOME/dbs in the order:
1. spfile$(ORACLE_SID}.ora
2. spfile.ora
3. init${ORACLE_SID}.ora
Greets
Thorsten

Unable to connect to Oracle Database using Oracle Sql developer 2.1.1.64

Hi Everyone,
I am searching for some help regarding my problem with Oracle connectivity. I have installed Oracle 11g release 2 on my Windows XP Professional Laptop. For a few days after installation i could connect to the Oracle database with the SYSTEM account using Oracle SQL developer ( installed on the same Laptop) but now i am unable to do so.It gives me this annoying message:
An error was encountered performing the required operation Got a minus one from read call .Vendor code 0
However i am able to connect using Sql Plus by supplying the username SYSTEM and the corresponding password.
My TNSNAMES .ora file is as follows:
ORACLE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST =localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORACLE)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
My Listener.ora file is as follows:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = D:\app\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:D:\app\product\11.2.0\dbhome_1\bin\oraclr11.dll")
(SID_DESC =
(GLOBAL_DBNAME = Oracle)
(ORACLE_HOME = D:\app\product\11.2.0\dbhome_1)
(SID_NAME = Oracle)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(PROTOCOL_STACK =
(PRESENTATION = GIOP)
(SESSION = RAW)
ADR_BASE_LISTENER = D:\app
My Sqlnet.ora file is as follows:
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
I am new to Oracle and so i need someone in this forum who can help me resolve this problem. Also i even tried connecting to the database using Toad 10.5.0.41. It give me the following error:
ORA 12537 : TNS Connection closed
Thanks for your patience and help in advance.
---Prashant

Hello Irian and Sue,
I can connect to the Oracle database using SQL Plus. Now when i TNSPING ORACLE from command line i get the following message :
Used parameter files:
D:\app\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST =localhost
*)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = ORACLE)))*
TNS-12537: TNS:connection closed
Thanks for your response to my initial post.Do u have any other methods to resolve this?

I am new to using Oracle, and I am trying to create an add/insert stored pr

I am new to using Oracle, and I am trying to create an add/insert stored procedure for a table. The PROD_CD and PLAN_CD fields in my table can have no value (empty or null) Can you please check my code and let me know what I am doing wrong?
Table definition:
CREATE TABLE DCWEB.USER_PLAN_PREFERENCE
USERID VARCHAR2(40) NOT NULL,
PROD_CD VARCHAR2(9) NULL,
PLAN_CD VARCHAR2(9) NULL,
STATE_LST VARCHAR2(2) NOT NULL,
STATE_NM VARCHAR2(40) NOT NULL,
LST_UPDATE_TS TIMESTAMP(6) DEFAULT CURRENT_TIMESTAMP NOT NULL
ALTER TABLE DCWEB.USER_PLAN_PREFERENCE
ADD CONSTRAINT USER_PLAN_PREFERENCE_XPK PRIMARY KEY (USERID, PROD_CD, PLAN_CD);
-- Grant/Revoke object privileges
grant select, insert, update, delete on DCWEB.USER_PLAN_PREFERENCE to HIGGIB1;
Stored Procedure Definition:
procedure setUserPlanPref (
userid in varchar2,
prod_cd in varchar2,
plan_cd in varchar2,
state_lst in varchar2,
state_nm in varchar2
is
currentTimestamp timestamp := current_timestamp;
begin
insert into user_plan_preference (userid, prod_cd, plan_cd, state_lst, state_nm, lst_update_ts)
values (upper(userid), upper(prod_cd), upper(plan_cd), upper(state_lst), upper(state_nm), currentTimestamp);
commit;
exception
when dup_val_on_index then
begin
update user_plan_preference up set
up.userid = upper(userid),
up.prod_cd = upper(prod_cd),
up.plan_cd = upper(plan_cd),
up.state_lst = upper(state_lst),
up.state_nm = upper(state_nm),
up.lst_update_ts = currentTimestamp
where up.userid = upper(userid)
and up.prod_cd = upper(prod_cd)
and up.plan_cd = upper(plan_cd);
commit;
exception
when others then
rollback;
end;
when others then
rollback;
end;
end;
INPUT DATA
I am unable to insert a record calling the stored procedure with values: DCWEB4578, , 2P, CA, CALIFORNIA but when I change to the string "NULL", the insert succeeds. When I try to call the stored procedure to update the inserted record with values: DCWEB4578, "NULL", 2P, CO, COLORODO the update does not happen since I still see the original record in the table. Please advise. Thanks in advance for your help.

938319 wrote:
I am new to using OracleWelcome to the forum: please read the FAQ and forum sticky threads (if you haven't done so already), and ensure you've updated your profile with a real handle instead of "938319".
You'll get a faster, more effective response to your questions by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s)
With APEX we're fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
Thanks for posting the complete code, it makes it so much easier to understand the problem, but always post code wrapped in tags<tt>\...\</tt> tags to preserve formatting and special characters.
and I am trying to create an add/insert stored procedure for a table.Does this have anything to do with APEX, for which this is the forum? General SQL &amp PL/SQL matters should be directed to the {forum:id=75} forum.
The PROD_CD and PLAN_CD fields in my table can have no value (empty or null) Can you please check my code and let me know what I am doing wrong?This:
commit;
exception
when others then
rollback;
end;
when others then
rollback;Remove it all.
Commits should be issued by end user/client software on completion of a transaction. This means <tt>commit;</tt> should almost never appear in PL/SQL code. The main exception to this is in <tt>dbms_job/secheduler</tt> scheduled processes that have no client or UI. If this code is executed from APEX, then APEX issues more than enough commits anyway.
exceptions are just a way of ensuring your code is buggy.<tt>when others</tt> exceptions are just a way of ensuring your code is buggy.
INPUT DATA
I am unable to insert a record calling the stored procedure with values: DCWEB4578, , 2P, CA, CALIFORNIA but when I change to the string "NULL", the insert succeeds. When I try to call the stored procedure to update the inserted record with values: DCWEB4578, "NULL", 2P, CO, COLORODO the update does not happen since I still see the original record in the table. Please advise. Thanks in advance for your help.With the <tt>commit</tt>s and <tt>when others...</tt> removed from the code you'll have a chance of seeing what's actually happening. Note that the entire procedure can be simplified by writing as a MERGE</tt> statement.

Using Oracle to Oracle Datapump KM in ODI

Similar Messages

Maybe you are looking for