Using Pagination, but Defaulting initial page to display all results

Ok, I've inherited a JSF application that uses pagination to display results in a table. There's an enhancement request to initially display all the results of a table yet allow end users to "go into pagination mode." I've looked all over the web and played around with the code. Currently, I'm setting paginationbutton to true, but paginationcontrols to false. This remove the pagination navigation buttons, and initially displays all the results. Users can even go from displaying all results into pagination mode. However, the navigation is lost since paginationcontrols is set to false.
Anybody know of a way to achieve what I'm looking for?
Thanks,
James

Hi,
When you execute any query on web, it actually uses a standard template which is present i.e. 0Analysis_Pattern and shows the report accordingly. Hence, your output will be based on the settings done in this template.
So, I guess, you need to modify the number of rows to be visible at a time in the standard template.
Hope this helps ..!
-Pradnya

Similar Messages

How do I get my messages to come through on my ipad Via my mobile number? They always used to but I've had to change all my Apple ID if that has anything to do with it? In iMessages it will only take an email address!

How do I get my messages to come through on my ipad Via my mobile number? They always used to but I've had to change all my Apple ID if that has anything to do with it? In iMessages it will only take an email address!

Hi EmilyWick123!
Here is an article that will help you address this question about linking your Apple ID and phone number:
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/ht5538
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

TS4268 I am being charged for international msgs which i haven't sent to a number of the UK.i tried to activate my iMessage and FaceTime using wifi but then it didn't connect. all settings have been turned off but my acc. is being charged.what to do?

I am being charged for international msgs which i haven't sent to a number of the UK.i tried to activate my iMessage and FaceTime using wifi but then it didn't connect. all settings have been turned off in my phone! i also have reset my phone with all the settings. but when i contacted my carrier, he said that the balance deduction is because of the international messages i have sent, but i have sent NONE! every time i switch on my phone, balance gets deducted. imessage and facetime are all disabled! but then the problem started since yesterday when i tried to activate them but had disabled them all at the next moment! but the charges are still being applicable for some international messages as per my mobile carrier. what to do? is there some problem with my phone or carrier?

I am being charged for international msgs which i haven't sent to a number of the UK.i tried to activate my iMessage and FaceTime using wifi but then it didn't connect. all settings have been turned off in my phone! i also have reset my phone with all the settings. but when i contacted my carrier, he said that the balance deduction is because of the international messages i have sent, but i have sent NONE! every time i switch on my phone, balance gets deducted. imessage and facetime are all disabled! but then the problem started since yesterday when i tried to activate them but had disabled them all at the next moment! but the charges are still being applicable for some international messages as per my mobile carrier. what to do? is there some problem with my phone or carrier?

How can I display all results of a array element in a TS2.0 NumericArrayMeasurement in a single report line?

TestStand2.0 generates for each result property ( data, limits, status...) of each array element in a NumericArrayTest an extra line in the test report.
How can I change this to display all result properties of one array element in a single line?
How can I reduce the spaces between the property name and its value in the report?
How can I delete the message: "Measurement[x]" and display only the Measurement Alias (named in the Edit Limits menu)?
This means I like to change my report from:
Measurement[0] (ADC1):
Data: 5000
Status: Passed
Measurement[1] (AD
C2):
To:
ADC1: Data: 5000 Status: Passed
ADC2: ...

Hi,
What you can do, is use the Override Callbacks for Modify the Report that is Generated.
Also you can also change the report sequence 'reportgen_txt.seq' to achieve the desired affect. If you go for modifying the report sequence then copy this to the User folder and then make your changes.
In the Resources Library you can find simple examples were the report has been modified by either using the Override Callbacks or by modifying the actual sequence.
One other item in the Report Options you will have to set the 'Select a Report Generator for Producing the Report Body' control to use the Sequence instead of the DLL.
Hope this helps
Ray Farmer
Regards
Ray Farmer

How to open documents by default with Pages 4 ( "Change All", "Open With" info option)?

Hello I installed Pages 5, which I don't like.
So I would like to open all my documents by default with Pages 4. However, I can't get the system to fix this default. In the "Info" panel of the Finder, under "Open With", I can set Pages 4 as a default app for one single document, but when I ask to "Change All" documents and use Pages 4, the system refuses to use the setting I select, and keeps reverting to Pages 5. Any suggestion, short of uninstalling Pages 5? Although I don't like it, I need to use it sporadically, so I don't want to uninstall it.
Thanks.
l.

As far as I know, there is not any built-in way to do this. Perhaps an add-on can modify how the "star" works or add a new button for this function?
Until then, you'll have to continue changing the pop-up list:
* when bookmarking a page, double-click the star, and change "Unsorted Bookmarks" to "Bookmarks Toolbar" and then click Done
* when bookmarking a page, press Ctrl+d or right-click the page > click the star on the context menu, and change "Bookmarks Menu" to "Bookmarks Toolbar" and then click Done
Some users like to drag the padlock or globe from the left end of the address bar to the Bookmarks Toolbar, but if you always want the new bookmark added at the end, then this is not efficient.

Sharepoint 2010 - Home Page not displaying, all other pages work fine

The web page URL <server>/sitepages/Home.aspx is not displaying when accessed. All other pages work fine. We changed the default welcome page to another page, and that works. When we try to access the Home.aspx, it displays "An unexpected error
occurred" message. The Home.aspx only contains a couple of Lists, with Links, and a calendar. The other odd thing is that the Home.aspx displays in SharePoint designer in Advanced Edit mode, but won't display in a browser. Any ideas?

Hi Isepic,
1) Check the approval of the page (Home.aspx) whether it is in pending state .
2) OR might be some problematic webpart is added in the page. You can try to close it and access. To do that,you can try to access the web part maintenance page of home.aspx and test by closing the webpart one by one.
To access the maintenance page,pass the parameters ?contents=1 after the home.aspx
For example, http://site url/home.aspx?contents=1
3) Also,check the ULS logs after accessing the home.aspx to know what is happening.
Please remember to mark your question as answered & Vote helpful,if this solves/helps your problem.
s p kumar

How to Add a New Filter Value in BEx WAD to Display All Result

Hi experts,
I want to add a new filter value in BEx WAD to display all data records. The scenario is as follows:
The status field can have two values: Active ("A) and Inactive ("I").
But the requirement is to have a third value to display all the data records (Active + Inactive). E.g. the value can be "G". The purpose is to increase the understandability for report users.
Does anyone have an idea?
Regards,
Joon

Hi Vineet,
thanks for your reply. The problem is that there are only 2 values available for this Characteristic: "A" or "I".
The requirement is to have a third value "G" (instead of the default "All Value") due to historical reason, because all future report users have been working with R/3 reports for quite some time and they are accustomed to using "G" for displaying all values.
Is there any possibility to realize this?
Thanks,
Joon

Any preference to set to answers report in order to display all results?

Hi,
This is OBIEE specific question. I am posting for the first time. Hence kindly point me to the right forum if this is not the one.
If an Answers report is likely to produce > 25 rows or so, it throws an arrow icon with a star in it to get all results.
is there any preference to set to the answers report to fetch all reports?
this is especially useful when we add reports to dashboard and in briefing books. we want all the data in some instances.
Thanks in Advance,
-vinod.

Hi David,
we have different users like Administrator, Test, Dev,..etc and they are work in one Dashboards.
so I want to display all users and active users information like Log in Time, log out Time, current user information and which objects (Variables) are using in Answers or in Dashboards.
I want to display these information in one dashboard page (Tab).
Is it possible..... yes means plz inform the way to accomplish this issue
Thanks in Advance
Balaa

Verity on CFMX7 not displaying all results

I'm developing a search function using the built-in Verity
engine packaged with ColdFusion MX7. However, I noticed that the
search results do not display anything that has a score below
0.7742. Is this cut-off by design? I need Verity to find and
display all instances of the search criteria, regardless of score.
Any and all help on this matter is greatly appreciated.
Thanks!

Welcome to SDN.
This is really surprising.
can you put the code you have used in the abap report and also tell us whether you are using integrated its or standalone its.
also the url u have used to access this application
Regards
Raja

Get-ADUser Script Runs but issues error command before returning all results

Greetings;
I am running Windows Server 2008-R2 and try to execute a PowerShell command as follows:
I am trying to locate user objects that have been inactive since September 1 and do not have any Exchange mailboxes. The query does run and I do get a number of records, however, the error is issued, as shown above.
can you please shed some light as to why I am getting this error message? I do appreciate your time.
Behrooz

I see this thread isn't answered yet, so I'm taking another shot at it. I am positive my script is going to give you the results you are looking for. I have reproduced this in my lab.
What I did:
- I created a set of users in an OU in my domain.
- I populated the 'employeeType' property on a handful of them
- I created mailboxes fora subset of those users on my Exchange server
- I did NOT log in with any of these accounts, but that is the easy part.
Run this query and you will get a returned set of accounts that:
- Have not logged on since 9/1/2013
- Do NOT have a mailbox (this is query-able through Get-ADUser because the HomeMDB property is only populated when you have a mailbox. Using the Exchange tools is not necessary)
- Accounts that do NOT have any anything in their 'employeeType' property.
Get-AdUser -filter * -properties * |
Where-Object {$_.HomeMDB -eq $NULL -AND
$_.employeeType -eq $NULL -AND
$_.lastlogondate -ge "9/01/2013"} |
Select displayname,distinguishedname,samaccountname,employeetype |
Export-Csv "employeetype.csv" -notypeinformation
** This result is going to find people with NO employeeType. If that is the opposite of what you're looking for, change that like from -eq (equal) to -ne (not equal) or you can use -like and -notlike. Both give the same results.
Your results will export to a CSV and will not print to the screen. Again, with the way this is written, the employeetype column will be empty.
If you want to copy and paste this script, please paste it into the ISE and push play. If you save it as a .ps1, you'll have to ensure you have the appropriate executionpolicy set (Open PS as an admin, run 'set-executionpolicy unrestricted')
If you chose to run it in a PS window as is, please ensure this whole syntax is all on one line.
Okay! Come back and tell me you were successful and mark me as the answer!! :)
Chris Ream

Firefox opens/loads but no web pages are displayed

When Firefox starts, the menu bar (I think it is called) at the top of the screen appears normally. Under the "View" options everything is "grayed out" rendering all options inaccessable. Through the "bookmarks" tab I can navigate to pages and I see that I am accessing the pages through the "Windows" tab, however no pages pop up on my screen (I only see my desktop background).
This problem occured after I broke down my computer set up, (using an external monitor with laptop) re-connected the monitor, and re-started the computer. I can use Safari normally however.
Thank you for your help!

first thing to try is reset zoom levels to normal - press ctrl + 0 ('zero')
also have a look at [[Websites look wrong]]

App Store will not close app that I installed so I can't get to the App Store page. I uninstalled that app but the initial page to install is frozen on my AppStore page

My App Store page is frozen with an app page opened on it and I can't close.

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.

Pages Document displays all white in preview

I took an old flyer that I had on my iPad and brought it over to my MacBook Pro. After I finished the modifications I tried to put it back on my iPad. It kept hanging on the import so I decided to just save it as a PDF and manually place it on the iPad. However, when I save as a PDF all that displays is a white page, if I try to print the preview screen is all white as well.
Any help would be appreciated, I need to get this flyer ready by Monday.
Thanks
PB

There was one (maybe two) plain yellow object like this one. I build this one in a hurry with Gimp but in the doc it was a vectorial object.
and if I remember well, after removing it (or them) the doc behaved well.
If I may get the doc with is treated in this thread, I would try to identify it in the index.xml file.
Maybe I would understand what's wrong with it.
Yvan KOENIG (VALLAURIS, France) dimanche 5 février 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k

Ah no, firefox has changed.. i loved the settings before but now the page has gone all big with a google box..what's happened?!

i don't think i downloaded MF 4 but my computer closed itself to do updates and now i've lost the MF page i always had before which was great..
how do i get it back.. think i'm running 3.6

@<b>gobby</b>
Please do not use existing threads to ask a question, but [/questions/new start a new thread] instead.
Then you also can provide troubleshooting information like your operating system and installed plugins (about:plugins), and extensions (Tools > Add-ons) and we will be better able to help you.<br />
See [[Deleting bookmarks]]

I want to update my iphone 4 on a new computer i have never used before but i dont want to lose all my data what can i do to save songs, contacts, games etc

I need to update my iphone 4 but have never used this computer before and i dont want to lose all my songs contacts and games can anyone help me find out if its possible and how to do it im desperate.

Or just wait until you can use the computer you used previously. If that isn't possible see Recovering your iTunes library from your iPod or iOS device.
tt2

Using Pagination, but Defaulting initial page to display all results

Similar Messages

Maybe you are looking for