Using period labels as numbers

Sorry about the subject description I was trying to explain exactely what I'm hoping to be able to achieve
I would like to be able to have the function in a report created in Oracle Hyperion Finacial Reporting Studio 11.1.2 that reacts in a certain way if the period is Jan but slightly differently if the period is Feb, the end part of my formual ideally would be (Cur Period Number * 12).
Does anyone know if this is possible within the Reporting Studio?
Any help would be much appreciated
Thanks,
JQ

Hi JQ,
Could you elaborate a little on what you are trying to achieve in your report? From a high-level understanding of your issue, I'm thinking that maybe you could structure the report to pull in the periods into separate columns and then use a hard-coded period number to use in your calculation for each month.
MR
Edit: I was incorrect in stating that you could use the hard-coded numbers (e.g. text cells) in your calcs. The way I got around this was to set up a statistical account with the month numbers and pulling the account into the report for calculations. I was only able to use the hard-coded numbers in conditional formatting. Sorry, it's been a while since I created the report!
Edited by: MR on Apr 2, 2013 6:26 AM

Similar Messages

How can I print address labels from numbers spread sheet

How can I print address labels from numbers spread sheet

CAB,
The 5163 template has the following dimensional specs:
Dimensions & Info
Length: 4.00000"          Height: 2.00000"
Top Margin: 0.50000"          Bottom Margin: 0.50000"
Left Margin: 0.18000"          Right Margin: 0.18000"
Hor. Spacing (gutter): 0.14000"          Vert. Spacing (gutter): 0.00000"
Intended Use: Mailing Labels, Shipping Labels, Address Labels
There's a great vendor site with this data readily available, better than the Avery site in my opinion. But, you can get the same info in the Contacts Print dialog pane.
You can grab a template matching these dimensions from that vendor site, Copy the table after opening the Word Template in Pages and drop the into a blank Numbers Sheet.
I found that Sheet side margins of 0.15" worked better than 0.18. For some reason the table wanted to flow to the next page to the right with 0.18". Turning off the Headers and Footers and setting Top and Bottom Margins to 0.5" worked well. These adjustments are made in the Sheets Inspector.
So, that will put the template you specified into a Numbers document and you can print labels properly aligned from there. Since your problem statement is a bit lacking in detail, that's all I can offer you at this point.
Jerry

Linking a Period Indicator to a Posting Period and Document Numbering

Dear All,
Could you please tell me that, what will be the consequences if I do not link a Period Indicator to a Posting Period and use the Period Indicator in any document numbering?

Hi,
The use of the period indicators depends on the accounting practice of the company.
The consequence you will face when you are not using period indicators:
1.Your document numbering series will be continued from year to year,for ex.if your last document numbering series for AP Invoice is 3489 for FY200809,then the starting series for the FY200910 will be 3490.
2.You should perform period end closure before proceeding to the next financial year,which would not be possible(Atleast one month in the new financial yr) as we may need to use adjustment transaction for accounting/auditing purpose
3.Unless you perform year end closure the new series can not be continued,if you continue there must be accepted/explained in the accounts auditing too .
4.But you don't use period indicator,there will not be any necessity to create new document series for every new financial year.
Also check this document on [Period indicators|https://websmp105.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000513532005E] for better understanding.
Hope this is helpful!

HT4623 I still have an iPad 1, and need to update to iOS 7 to use Keynote, Pages and Numbers but I get the message the my system is updated in iOS 5.1.1 and doen's offer me another update!

I still have an iPad 1, and need to update to iOS 7 to use Keynote, Pages and Numbers but I get the message the my system is updated in iOS 5.1.1 and doent's offer me another update! How can I update it? Or I can't?

ayrosa wrote:
I still have an iPad 1, and need to update to iOS 7
Sorry... This is not possible. The iPad 1 can Only go as far as iOS 5.1.1

How to set up an address book and make labels with numbers or pages?

How do you set up an address book and make labels with numbers or pages?

Create an Apple ID - My Apple ID

How to make use of label printing in sap smartforms

Hi Dear,
How to make use of label printing in sap smartforms.. I need to print four records from internal table into sap smart forms. It will
come as four labels.All page should follow the same procedure... How to do...please help me..
Regards,
Nikhil

Hi,
Please go through below link, would be helpfull for you.
[http://help.sap.com/saphelp_nw04/helpdata/EN/6b/54b4b8cbfb11d2998c0000e83dd9fc/frameset.htm]

Best practice for using anchor labels?

I am looking into using anchor labels for the first time and
I am thinking I cant use them for this site because I am using xml
and other variables that are being passed in on the first frame but
maybe there as a chance that it still works. So I would like to
know the best ways to use anchor labels. Someone who has used them
please let me know.
Thanks,
Randy

I've used anchor tags in Dreamweaver a lot, but never in
Flash

Using a checkbox in numbers- if,then, I want to display today's date if checked, and keep that date, the day it was checked, not the current day

Using a checkbox in numbers- if,then, I want to display today's date if checked, and keep that date, the day it was checked, not the current day

this will not work. Numbers does not provide a timestamp. you can, however, enter the formula "=now()" in any cell, then copy that same cell, then paste (using the command "Edit > Paste Formula Results"
If you need a time stamp often,
make a single cell table with the formula (mentioned earlier).
and copy and paste as needed

Iam using a table in numbers to plot daily graph lines. If I fill a cell with a text box at say zero it plots the graph. I can't actually set the cell value until the actual day but the graph plots it at zero when I don't want it to plot anything. Is tho

I am using a table in Numbers to plot daily graph lines. Mood swings of how I am on the day, i"m a depressive.
If I fill a cell with a step box at say zero it plots the graph. I can't actually set the cell value until the actual day but the graph plots it at zero when I don't want it to plot anything. Is there a work around. so thatbgraph only plots on the day?

The answer is (sort of) in your subject, but edited out of the problem statement in the body of your message.
When you use a stepper or a slider, the value in the cell is always numeric, and is always placed on the chart if that cell is included in the range graphed by the chart.
But if you use a pop-up menu cell, you can specify numeric or text values in the list of choices for in the menu. Numeric values will be shown on the chart. Text values will not.
For the example, the values list for the pop-up menu was:
5
3
1
Choose
-1
-3
-5
The first pop-up was set to display Choose, then the cell was filled down the rest of the column. Any text value (including a single space, if you want the cell to appear blank) may be used instead of Choose.
For charts with negative Y values, the X axis will not automatically appear at Y=0. If your value set will include negative values, I would suggest setting the Y axis maximum and minimum to the maximum and minimum values on your menu list, rather than letting Numbers decide what range to include on the chart. Place a line shape across the chart at the zero level, and choose to NOT show the X axis.
Regards,
Barry

Use of label in script?

what is the use of Label in sap script ?

To create labels in SAPSCRIPT, you will have to define multiple MAIN WINDOWS in the Page Window.. try the following steps..
Main windows in page windows allow you to format text in multiple columns. Define an area in the page window, in which to position the main windows.
1. Create a page window and assign it to a page.
2. Choose Edit --> Main windows.
A dialog box appears.
3. Enter values in the fields Area width and Area height in accordance with the input guidelines for main windows.
4. Enter values in the fields Spacing and Number in the Horizontal group if you want to use multiple columns. You can ignore the fields in the Vertical group.
5. Determine how many columns and line areas are required for label printing. Then enter the corresponding values in the fields in the Horizontal and Vertical groups.

Unable to use Periodic as a View frequency in EPMA

Setup: we have recently configured an EPM 11.1.2.1 environment and have migrated over two HFM applications from current production system. Both applications are accessible from within EPM Workspace. I have "Transformed" the classic applications to EPMA models and can view/modify them within Application/Dimension Library.
Issue: When attempting to Validate the consolidation applications within EPMA, I keep getting the following error in the validation report:
Error : Member 'ACTUAL' in dimension 'Scenario' failed validation 'DefaultFreqCantBeNullOrPeriodic' for the following reason(s): Default Frequency cannot be empty or Periodic.
EPMA is not liking that my View dimension has the "Periodic" frequency and having it set on the "Default Frequency" for scenarios. Is there a reason why "Periodic" cannot be used?
Periodic is commonly used and described within HFM documentation and I have yet to see any documentation stating that EPMA cannot use Periodic as the base month frequency.
The other user defined view frequencies that I use are QTD and YTD. They are aligned with quarters and [Year] within the Period dimension.
I'm looking for a solution that does not require a full rebuild of the HFM applications where I would then define the base frequency as "MTD" instead of Periodic.
Any insight or solution is greatly appreciated!!

I will do my best on your comments and may be repetitive (I am also getting tried and am sleepy). I get the impression that the result looks fine in Acrobat OR Reader. I an not sure reader can e-mail the PDF, but if it can the results often depend on the client e-mail setup (typically requiring MAPI to be active. Many folks (even my on some machines) just can't get the e-mail option to work. I would suggest that they simply attach the PDF to an e-mail directly, though I think you are trying to streamline the process. At least that may give a working process as you are trying to find out what is happening.
Howver, you also seem to suggest that the e-mail works (that would mean that the PDF was attached to the e-mail). In that case, my guess is that the e-mail package on the client machine is not set to encode attachments properly. I would suggest that encoding (typically MIME) be activated in the client for all attachments. Outlook has problems in that it often reads a PDF as a text file and does not encode it unless you force the encoding. When that happens the PDF gets corrupted.
If that is not the problem, then it may simply be that the fonts are not in the PDF or present on the receiving systems, causing a messed up font substitution, particularly if something like the MAC PDF viewer is being used rather than Reader.
I may still not understand the problem, but that is my best guess at this point.

What is the use of labels in scripts?

What is the use of labels in scripts?
why it is not possible to create lables in smartforms?
How can we print different barcodes in scripts and smartfoms?
Is it possible to create a background logo for a page in script?
I think we can do this background logo in smartform but in script is it possible?
Thanks in Advance.
Regards
Abhilash.

1) Labels are used to get
when u want to do same thing fro diffrent items.
like when u want to print address for all employess to stick to hike salary envelopes.
lke when u want price and barcode of matriels to print to metrials.
2) it is possible to do this in smart form for this we use normal window consept.
3) and 4) yes it is possible to create background logo in script
Here is the blog on achieving watermark in SAPScript:
/people/naimesh.patel/blog/2008/05/22/watermark-in-sapscript

Using Regular Expressions in Numbers 09?

Is there any way to use regular expressions in Numbers 09 in Find & Replace?

kilowattradio wrote:
Is there any way to use regular expressions in Numbers 09 in Find & Replace?
NO !
_Go to "Provide Numbers Feedback" in the "Numbers" menu_, describe what you wish.
Then, cross your fingers, and wait _at least_ for iWork'10
Yvan KOENIG (VALLAURIS, France) vendredi 25 septembre 2009 14:49:49

Delete 3KEH,3KEI for using periodic transfer PCA (1KEK) instead

Dear Sir,
We want to delete 3KEH,3KEI for GL accounts (balance sheet adjustment revaluation) for using periodic transfer PCA (1KEK) instead. But there are a lot of open item in the source account (vendor & customer open item).
If we block for posting to these GL accounts (balance sheet adjustment revaluation) and the source GL account at the begining of the month before positng any transaction to these GL.
Then we delete config. 3KEH,3KEI for these GL accounts (balance sheet adjustment revaluation). then let the user post normal transaction. And at the month end period, we run 1KEK for periodic transfer PCA for the balance sheet adjustment revaluation account.
This can be done or not. Is there any impact to do like this? We afraid that PCA data may transfer incorrectly (Is it will duplicate with the realtime transfer that we have done in the last period?).
Please kindly advise.
FICO team.

Hello,
You need to maintain 3KEH and 3KEI (as per your requirements) for balance sheet accounts. It is not required to maintain reconciliation account in 3KEH.
All the reconciliation posting on other sub ledger accounts will be transferred by using 1KEK, 1KEH, 1KEI and 1KEJ.
Before executing these transaction code, it is required you run F.5D (Balance sheet adjustment)
Please go through the report KE5T to see the differences between your FI and CO.
Regards,
Ravi

I am getting a message that my complementary use period for "pdf complete" is expired. Must I buy "pdf complete" to continue to download pdf files?

I am getting a message that my complementary use period for "pdf complete" is expired. Must I buy "pdf complete" to continue to download pdf files? I didn't download anything on my previous macbook pro to download pdf files, and I definitely didn't pay for pdf downloading software.

PDF Complete is not necessary. Apple's Preview application and Adobe's Acrobat Reader (both free) are all most people need for pdfs.
If you want to create pdf documents there are any number of applications for it. Easiest might be to just print to pdf, (File menu > Print > PDF button) in many applications.
Best of luck.

Using period labels as numbers

Similar Messages

Maybe you are looking for