Using Repair Full to load Data
Hi Guys
I have to load several years of data. Being loaded into ODS and Cubes in delta mode. I want to break the load into small chunks to load in a controlled fashion. That's what I have planned to do
1- Initialize without data transfer
2-Run Repair full for each year from 2001 to 2006
3-Then start running the deltas.
I am just curious if u know if this method is going to work. Does the delta that i m going to run after running the last repair full will bring all the data again or just the changed records.
I also want to go back historically with repair fulls to make the current data available. Is this going to work or not. If not what should I do to load the data periodically.
Hi,
If you want to do this year load to cube then you can full load sepcifying the year in the infopacakge.
You need not run the program which i specified earlier for cube, but in case you want to do this load year full to ODS and in case delta load is going on in the ODS then you will have to first do the full loads for the years u want to and then excute the program and then carry on with delta loads.
I hope I'm clear.
In case you are not able to see the radio buttons then you can drop a mail to [email protected] and tell them that you are not able to give points for this post.
Regards,
Rohini
Similar Messages
-
Can i use one interface to load data into 2 different tables
Hi Folks,
Can i use one interface to load data into 2 different tables(same schema or different schemas) from one source table with same structure ?
Please give me advice
Thanks
Raj
Edited by: user11410176 on Oct 21, 2009 9:55 AMHi Lucky,
Thanks for your reply,
What iam trying is ...Iam trying to load the data from legacy tables(3) into oracle staging tables.But i need to load the same source data into two staging tables(these staging tables are in two different schemas)
can i load this source data into two staging tables by using single standard interface(some business logic is there)
If i can then give me some suggestion how to do that
Thanks in advance
Raj -
Error while using Rule file in loading data into Essbase through ODI
Hi Experts,
I am facing problem while loading data into Essbase. I am able to load data into Essbase successfully. But when i used Rule fule to add values to existing values am getting error.
test is my Rule file.
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Cannot put olap file object. Essbase Error(1053025): Object [test] already exists and is not locked by user [admin@Native Directory]
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2458)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
at java.lang.Thread.run(Thread.java:662)
from com.hyperion.odi.common import ODIConstants
from com.hyperion.odi.connection import HypAppConnectionFactory
from java.lang import Class
from java.lang import Boolean
from java.sql import *
from java.util import HashMap
# Get the select statement on the staging area:
sql= """select C1_HSP_RATES "HSP_Rates",C2_ACCOUNT "Account",C3_PERIOD "Period",C4_YEAR "Year",C5_SCENARIO "Scenario",C6_VERSION "Version",C7_CURRENCY "Currency",C8_ENTITY "Entity",C9_VERTICAL "Vertical",C10_HORIZONTAL "Horizontal",C11_SALES_HIERARICHY "Sales Hierarchy",C12_DATA "Data" from PLANAPP."C$_0HexaApp_PLData" where (1=1) """
srcCx = odiRef.getJDBCConnection("SRC")
stmt = srcCx.createStatement()
srcFetchSize=30
#stmt.setFetchSize(srcFetchSize)
stmt.setFetchSize(1)
print "executing query"
rs = stmt.executeQuery(sql)
print "done executing query"
#load the data
print "loading data"
stats = pWriter.loadData(rs)
print "done loading data"
#close the database result set, connection
rs.close()
stmt.close()
Please help me on this...
Thanks & Regards,
ChinnuHi Priya,
Thanks for giving reply. I already checked that no lock are available for rule file. I don't know what's the problem. It is working fine without the Rule file, but throwing error only when using rule file.
Please help on this.
Thanks,
Chinnu -
Using Import Man to load Data into Multi Value Fileds in a Qualified Table
Hi there,
When using the Import Manager, i can not use the "append" option to load data into my multi value field which is contained within my qualified table.
Manually it works fine on Data manager, so the field has been set up correctly. Only problem is appending the data during Import Manager Load.
Any reason why I do not have this option available during Field mapping in Import Manager. The selection options are shown but in gray.
Would appreciate any sugestions.
Chris HuggettThanks Sowseel
Its a good document but doesn't address my problem, maybe My problem isn't clear.
The structure(part of) that I have currently is as follows.
Main Table - Material
QFTable- MNF PN
LUField - MNF Name(Qualifier Single Value)
LUField - BU ID (Non Qualifier Multi Value)
TField - P/N- (Non Qualifier)
I know how to load data to the main and qualified tables, but what I can not do, using Import Manger, is updating the "LUField - BU ID (Non Qualifier Multi Value)" using the append functionality.
Thanks
Chris Huggett -
Use Control File to load data in BW7.0
Hi All,
I have a requirement to load data in BW using control file. The development is done in in BW 7.0. In BW 3.5 there is an option of FILE IS ( Control File or Data File ). Please suggest how to simulate the same in BW 7.0
Regards,
VikramHi Vikram,
Please have the contents of a sample control file. The file should be saved as ".TXT".
FILENAME = C:\test.csv
FILETYPE = CSV
LOCATION = C
FS = ,
ESCAPE = "
DECIMALPOINT = ,
1000SEPARATOR = .
RECCOUNT = 8
RECSIZE = 53
PACKETSIZE = 1000
Filename should contain the path of the CSV file
Filetype is CSV
location is 'C' for Workstation and 'A' for Application Server
FS contains field seperator ',' in our case
RECCOUNT contain the Rec. Count
RECSIZE is the Max DB size of the a single row ( this can be evaluated by the Total DB Size of a single Line of the Target BW Structure as well ).
The content of my sample test.csv are
1234567890,10,9999999999,,,15,01/01/2005
1234567891,20,9999999999,,,30,01/01/2005
1234567892,30,9999999999,,,0,01/01/2005
1234567893,10,9999999999,,,5,01/01/2005
1234567894,20,9999999999,,,6,01/01/2005
1234567895,40,9999999999,,,10,01/01/2005
1234567896,10,9999999999,,,5,02/01/2005
1234567897,20,9999999999,,,6,02/01/2005
Please let me know if there are any further concerns.
Regards,
Shrey
Edited by: Shrey SAP BI on Mar 8, 2010 4:13 PM -
How to use Power Query to load data from a single source into multiple tables
Hi all,
I have a requirement to load my data into three different data models using Power Query. Is that possible?
My source is a SharePoint survey list, with similar questions like:
1) Course lecturer - John Doe
1a) The course was useful (rate 1 to 5)
1b) The lecturer displayed good knowledge of topic (rate 1 to 5)
2) Course Lecturer - Mary Brown
2a) The course was useful (rate 1 to 5)
2b) The lecturer displayed good knowledge of topic (rate 1 to 5)
I would like to split the data into separate data models (one for John Doe; another for Mary Brown), so that I can compare the different lecturers. Other than running separate surveys for each of them, I thought of using Power Query to transform the data.
Is it possible?
Thanks.
Regards
GMYes, this is possible.
Start with a single query that returns you the data for all lecturers.
Right-click on the "all lecturers" query in the queries pane, and choose Reference, once for each lecturer. This will create a query for each lecturer.
Open the query for each lecturer and filter the data so that only that lecturer's results are visible.
Click "Close & Load To..." for each lecturer's query to load the data into the data model. This will create a data model table for each lecturer.
If your question is more about how to transform such a survey list into a table that can be easily filtered, please provide an example of how the list shows up in Power Query.
Ehren -
Using PHP MySQL to load data into div
I have one page with mulitple images and one hidden div. When
one of the images are selected, the hidden div will appear and the
div will be loaded with dynamic data based on the button selected.
Can anyone give me any help on how to accomplish retrieving a
database record without using a url parameter?For the image to be clicked, the page will already have been
fetched from
the server. Since server-scripting only executes on the
server, you have
missed your opportunity to use server-scripting to retrieve
the data. And
since you don't want to use a URL variable, you would have to
use a cookie
or a session variable instead.
Have the click on the image first set a cookie/session
variable containing
the information for which record to retrieve, and then reload
the same page,
which will check the value in the cookie/session variable to
load the
desired record from the database, and populate the div.
If you don't want to reload the page then you will have to
use something
like SPRY/AJAX.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"green tomato" <[email protected]> wrote in
message
news:go2n9v$op1$[email protected]..
>I have one page with mulitple images and one hidden div.
When one of the
>images
> are selected, the hidden div will appear and the div
will be loaded with
> dynamic data based on the button selected. Can anyone
give me any help on
> how
> to accomplish retrieving a database record without using
a url parameter?
> -
InfoPath form failed to use NTLM authentication to load data - Invalid authorization specification
I knew this might be discussed in other places but I've searched over the web but still do not have a clue how to fix my issue.
I am using SharePoint 2010 and I created an InfoPath form that reads data from a database using data connection file (udcx). As explained in many other articles, I've set up my secure store correctly and created an application called 'InvestmentOperationAccess'
with a windows service account and then export the udcx file and enabled the <udc:Authentication> tag as flowing:
<udc:Authentication><udc:SSO AppId='InvestmentOperationAccess' CredentialType='NTLM' /></udc:Authentication>
Then I upload this file back to the data connection library and approved. But when I try to load the form in web broswer, I received the following error:
05/15/2013 14:40:15.09 w3wp.exe (0x0C94) 0x263C InfoPath Forms Services Runtime - Data Connections eq8l Warning The following query failed: EntityMatrixView (User:
xxxxx\xxx, Form Name: Template, IP: , Connection Target: , Request:xxxxxxxxx(URL of the list) Form ID: urn:schemas-microsoft-com:office:infopath:list:-AutoGen-2013-05-14T23:32:41:604Z
Type: DataAdapterException, Exception Message: The form cannot connect to the data source. Invalid authorization specification
In the meantime, I used SQL profile try to capture the credential it is used by nothing was passed to that SQL box.
Then I created another application in my secure store with SQL login account and modify my udcx file to be
<udc:Authentication><udc:SSO AppId='InvestmentOperationSQLAccess' CredentialType='SQL' /></udc:Authentication>
This time when I load the form, everything worked and in SQL profile I can see it is reading data using the SQL account I specified in secure store.
In a nutshell, it is working with SQL authentication type but not NTLM, anyone could help me with that?Same problem here. Anyone has a solution for that?
It seems one cannot use windows accounts with secure store and database access for info path data sources ... -
Error in loading data into essbase while using Rule file through ODI
Hi Experts,
Refering my previous post Error while using Rule file in loading data into Essbase through ODI
I am facing problem while loading data into Essbase. I am able to load data into Essbase successfully. But when i used Rule file to add values to existing values I am getting error.
test is my Rule file.
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Cannot put olap file object. Essbase Error(1053025): Object [test] already exists and is not locked by user [admin@Native Directory]
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2458)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
at java.lang.Thread.run(Thread.java:662)
from com.hyperion.odi.common import ODIConstants
from com.hyperion.odi.connection import HypAppConnectionFactory
from java.lang import Class
from java.lang import Boolean
from java.sql import *
from java.util import HashMap
# Get the select statement on the staging area:
sql= """select C1_HSP_RATES "HSP_Rates",C2_ACCOUNT "Account",C3_PERIOD "Period",C4_YEAR "Year",C5_SCENARIO "Scenario",C6_VERSION "Version",C7_CURRENCY "Currency",C8_ENTITY "Entity",C9_VERTICAL "Vertical",C10_HORIZONTAL "Horizontal",C11_SALES_HIERARICHY "Sales Hierarchy",C12_DATA "Data" from PLANAPP."C$_0HexaApp_PLData" where (1=1) """
srcCx = odiRef.getJDBCConnection("SRC")
stmt = srcCx.createStatement()
srcFetchSize=30
#stmt.setFetchSize(srcFetchSize)
stmt.setFetchSize(1)
print "executing query"
rs = stmt.executeQuery(sql)
print "done executing query"
#load the data
print "loading data"
stats = pWriter.loadData(rs)
print "done loading data"
#close the database result set, connection
rs.close()
stmt.close()
Please help me on this...
Thanks & Regards,
ChinnuHi Priya,
Thanks for giving reply. I already checked that no lock are available for rule file. I don't know what's the problem. It is working fine without the Rule file, but throwing error only when using rule file.
Please help on this.
Thanks,
Chinnu -
How to use ABAP to load data to a DSO
I have a use case where we load data to a Direct Update DSO with an ABAP program. We do this by directly writing to the table /BIC/Atablename00. While this approach has been working for us so far, it has a few drawbacks:
- no requests are generated (so you cannot easily revert your loads, archive them etc.)
- the last "data refresh" date does not get updated
- caching has to be turned off because the cache does not get notified about the new data in the DSO and therefore does not refresh.
I am now wondering whether there is a more high level approach within ABAP that would allow me to mimic the regular loading process more closely by creating a "request object" to load the data, have delta queues maintained automatically etc.
Is anyone aware of such an API?
Thank you,
DennisSiggi,
that is exactly what I was looking for. I also found your blog entry about that topic:
Generic Extraction via Function Module
as well as (an older) howto:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d3219af2-0c01-0010-71ac-dbb4356cf4bf
Thank you! -
Want to use sequence object of oracle when loading data in sql loader
Hi,
I want to use sequence when loading data in sqll loader, but the problem is i could not use sequence object of oracle to load the data by sql loader, i can use sequence of sql loader.
I want to use sequence object because in later entries this sequence object will be used.If i use sequence of sql loader how can i use oracle sequence object
Is there any other optionI have a simillar problem, I also want to use a sequence when loading data by the SQL Loader.
My control file is:
load data
infile '0testdata.txt'
into table robertl.tbltest
fields terminated by X'09'
trailing nullcols
(redbrojunos,
broj,
dolazak,
odlazak nullif odlazak=blanks,
komentar nullif komentar=blanks)
And the datafile is:
robertl.brojilo.nextval 1368 17.06.2003 08:02:46 17.06.2003 16:17:18
robertl.brojilo.nextval 2363 17.06.2003 08:18:18 17.06.2003 16:21:52
robertl.brojilo.nextval 7821 17.06.2003 08:29:22 17.06.2003 16:21:59
robertl.brojilo.nextval 0408 17.06.2003 11:20:27 17.06.2003 18:33:00 ispit
robertl.brojilo.nextval 1111 17.06.2003 11:30:58 17.06.2003 16:09:34 Odlazak na ispit
robertl.brojilo.nextval 6129 17.06.2003 14:02:42 17.06.2003 16:23:23 seminar
But all records were rejected by the Loader, for every record I get the error:
Record 1: Rejected - Error on table ROBERTL.TBLTEST, column REDBROJUNOS.
ORA-01722: invalid number -
Can't load data using DB Connect
I'm trying to use DB connect to load data from an external source database into SAP BW. Both databases are MSSQL. I've followed the steps in the document, "Transferring Data with DB Connect". The table in the source system has all CAPS for the table and the fields. I can see the data in the BW system via screen "DB Connect: Display of data from the database system". However, when I create an info package and try to load the data, the job seems to hang. It is stuck in YELLOW status with "0 from 0 records". Does anyone have a clue?
Thank you,
Tonydear Tony,
check if followed already all 'restictions' in oss 512739-BW external DB Connect for MS SQLServer
Datasource not showing up in RSA3
To avoid problems loading data, proceed as follows:
1. Create a special login for the extraction.
You should add this login to the db_ddladmin database role in the corresponding database. This generates a similar DB user at database level.
The user you use must have the 'CREATE VIEW' authorization at least. This is contained in the role mentioned above.
2. For the extraction, you should only use DB views that were created under this DB user. (refer also to type conversion, naming convention and so on)
3. Assign the necessary authorizations (SELECT at least) to the selected user in the source tables, or the columns of these tables.
4. Use the specially created login in the logon information when you set up the DB source system in BW. -
Loading Data to Essbase using Rule File Failed
Hi
i'm using IKM SQL to Essbase Cbue,
Now I would like to use rule file when loading data,
I created one in Essbase cube, then define it on the target (flow) and the Tab on Rule seprator,
I reversed the Essbase Cbue again.
when loading I get the following error bellow
(before loading I verfiy with sample file based on the same strcture from my source and load it via data load from EAS
and it works fine. also it works without any rule file.)
here's the error I'm getting from operator:
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 23, in ?
com.hyperion.odi.essbase.ODIEssbaseException
at com.hyperion.odi.essbase.ODIEssbaseDataWriter.loadData(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
at org.python.core.PyMethod.__call__(PyMethod.java)
at org.python.core.PyObject.__call__(PyObject.java)
at org.python.core.PyInstance.invoke(PyInstance.java)
at org.python.pycode._pyx30.f$0(<string>:23)
at org.python.pycode._pyx30.call_function(<string>)
at org.python.core.PyTableCode.call(PyTableCode.java)
at org.python.core.PyCode.call(PyCode.java)
at org.python.core.Py.runCode(Py.java)
at org.python.core.Py.exec(Py.java)
at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.j(e.java)
at com.sunopsis.dwg.cmd.g.z(g.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)
Caused by: java.lang.NullPointerException
at com.hyperion.odi.connection.AbstractHypAppWriter.logErrorRecord(Unknown Source)
at com.hyperion.odi.essbase.ODIEssbaseDataWriter.sendRecordArrayToEsbase(Unknown Source)
... 32 more
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.j(e.java)
at com.sunopsis.dwg.cmd.g.z(g.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)
pls advice what i'm doing worng?
Thanks!So are you saying the data load interface works if you remove the rule in the options?
Have you ever got any data loads to run with a load rule or without?
Cheers
John
http://john--goodwin.blogspot.com/ -
Loading Data Using Outline Load Utility - Error
Trying to load some data using Outline Load Utility. I followed the Oracle documentation on this and Under the Administration -> Manage Data Load area I defined Accounts as data load dimension, and period as driver dimension. I then added Jan - Feb as driver members. I wanted to load data for Jan. My data header looks like this:
Accounts,Jan,Point-of-View,Data Load Cube Name
acct1, 768, "2010, Ver1, Actuals, entity1, etc" Plan1
The command i typed is this:
C:\Oracle\Middleware\user_projects\epmsystem1\Planning\planning1>outlineload /A:Plan1 /U:Admin /M /I:C:\MockData2.txt /D:Accounts /L:C:\dataload.log /X:c:\dataload.exc
I get the following errors:
[Mon Nov 22 11:03:02 CST 2010] Unrecognized column header value "Jan".
[Mon Nov 22 11:03:02 CST 2010] Unrecognized column header value "Point-of-View".
[Mon Nov 22 11:03:02 CST 2010] Unrecognized column header value "Data Load Cube Name".
[Mon Nov 22 11:03:02 CST 2010]Unable to obtain dimension information and/or perform a data load: Unrecognized column header value(s), refer to previous messages. (Note: column header values are case sensitive.)
[Mon Nov 22 11:03:02 CST 2010]Planning Outline data store load process finished with exceptions: not all input records were read due to errors (or an empty input file). 0 data records were read, 0 data records were processed, 0 were successfully loaded, 0 were rejected.
This is version 11.1.2. What am I doing wrong here? I also find it interesting that the command for data load and metadata load is the same as per oracle docs. I guess Planning knows if we're trying to load data or metadata based on the CSV file header?I don't usually bother with loading data using the outline load utility but as a test on 11.1.2 using the planning sample application I gave it a quick go.
In planning, went to Administration > Data Load Settings > Picked Account as the data load dimension, Period as the driver dimension and selected Jan as a member
I created a file :-
Account,Jan,Point-of-View,Data Load Cube Name
TestMember,100,"Local,E05,Actual,NoSegment,Working,FY11",Consol
And used the following command line from the directory with the planning utilities
OutlineLoad /A:plansamp /U:admin /M /N /I:F:/temp/dload.csv /D:Account /L:F:/temp/outlineLoad.log /X:F:/temp/outlineLoad.exc
The log produced :-
[Tue Nov 23 10:02:01 GMT 2010]Successfully located and opened input file "F:\temp\dload.csv".
[Tue Nov 23 10:02:01 GMT 2010]Header record fields: Account, Jan, Point-of-View, Data Load Cube Name
[Tue Nov 23 10:02:01 GMT 2010]Located and using "Account" dimension for loading data in "plansamp" application.
[Tue Nov 23 10:02:01 GMT 2010]Load dimension "Account" has been unlocked successfully.
[Tue Nov 23 10:02:01 GMT 2010]A cube refresh operation will not be performed.
[Tue Nov 23 10:02:01 GMT 2010]Create security filters operation will not be performed.
[Tue Nov 23 10:02:01 GMT 2010]Examine the Essbase log files for status if Essbase data was loaded.
[Tue Nov 23 10:02:01 GMT 2010]Planning Outline load process finished (with no data load as specified (/N)). 1 data record was read, 1 data record was processed, 1 was accepted, 0 were rejected.
There you go no problems.
Cheers
John
http://john-goodwin.blogspot.com/ -
Need Help..!! Loading Data Using Outline Load Utility - No Data
Hi All,
I've tried to load data using Outline Load Utility but the data is not loaded into my Essbase.
Here are the step what I've done :
1. In planning, Administration > Data Load Settings
- Entity as the data load dimension,
- Account as the driver dimension and selected Rental, test_desc as the member
2. The .csv file
Entity, Rental, test_desc, Point-of-View,Data Load Cube Name
TLT, 100, 100, "FY11,Plan,Working,No Product,No Condition Type,No Vehicle Type,No Term Period,No Term,No Movement, Local, Apr", Retail
3. Run the Outline Load through cmd
E:\Oracle\Middleware\user_projects\epmsystem1\Planning\planning1>OutlineLoad /A:PLNDEV /U:xyz /M /N /I:E:/testload.csv /D:Entity /L:E:/OutlineLogs /X:E:/outlineLoad.exc
and below it the OutlineLogs :
[Mon Jul 25 04:01:42 PDT 2011]Successfully located and opened input file "E:\testload.csv".
[Mon Jul 25 04:01:42 PDT 2011]Header record fields: Entity, Rental, test_desc, Point-of-View, Data Load Cube Name
[Mon Jul 25 04:01:42 PDT 2011]Located and using "Entity" dimension for loading data in "PLNDEV" application.
[Mon Jul 25 04:01:42 PDT 2011]Load dimension "Entity" has been unlocked successfully.
[Mon Jul 25 04:01:42 PDT 2011]A cube refresh operation will not be performed.
[Mon Jul 25 04:01:42 PDT 2011]Create security filters operation will not be performed.
[Mon Jul 25 04:01:42 PDT 2011]Examine the Essbase log files for status if Essbase data was loaded.
[Mon Jul 25 04:01:42 PDT 2011]Planning Outline load process finished (with no data load as specified (/N)). 1 data record was read, 1 data record was processed, 1 was accepted, 0 were rejected.
No data rejected there, but when I tried to retrieve the data from my Planning Form or Essbase Add-In, there is no data.
Do I miss something in my step above..??
Please advise.
Thanks.
Regards,
VieNHi John,
thanks for reply..
I'm not check the essbase log yet..
From the OutlineLogs (Planning Outline load process finished (with no data load as specified (/N)). 1 data record was read, 1 data record was processed, 1 was accepted, 0 were rejected.), it doesn't mean the data successfully loaded, isn't it...??
Thanks.
Regards,
VieN
Maybe you are looking for
-
Can I set up a message-listener on a temporary destination?
//Given session exists Topic tempTopic = session.createTemporaryTopic(); TopicSubscriber receiver = session.createSubscriber(tempTopic); //Topic is a named topic defined using Admin tool. TopicPublisher sender = session.createPublisher(topic); sessio
-
Recording...music track cuts out
While recording female voice track over music...the music playback cuts out in the headsets aprox 2 minutes into the song. What causes this? Its frustrating because it prevents me from mixing a complete song and my artist is really peeved.
-
High enq: TX - row lock contention on RAC database
Hi Gurus, I have SAP applications running on 5 Oracle 10g (10.2.0.5) RAC nodes. I could observe high row lock contention in the database. db file sequential read 13.555.789.712 7.148.542.630 5.27 65 enq: TX - row lock contention
-
Prolblems on Loading the data using DataMovement
Hello Sir, I have created a .dat file and want to load in the table which is created by user. Now using the Data Movement when i gives the username and password for host credentials this error is popuped. install_driver(Oracle) failed: Can't load 'D:
-
How to setup Internet Sharing from new MacBook Pro to iMac G4?
Hey everyone, I have a new 2011 MacBook Pro running Snow Leopard (10.6.7) and an iMac G4 running Panther (10.3.9). The iMac doesn't have an AirPort card and the easiest way to get internet on it seems to be Internet Sharing. I want to setup Internet