Using result of a Calculated Keyfigure as input for a Virtual Keyfigure

Hi experts,
is it possible, to use the result of a calculated keyfigure of a query for the input of a virtual keyfigure und use the virtual keyfigure within the same query?
My problem: depending on drilldown, I have a different percentage within the calculated keyfigure. And depending on that value, I would like to read a score out of a DSO and fill a virtual keyfigure with that, and show the score in the same query. In my opionion, the only way to calculate the score is on the fly, depending on the navigation step I do. Maybe there is another approach that I do not know.
I was glad for any ideas. Thank you in advance!
Regards
F.L.

Hi,
Sorry but a calculated key figure result cannot be used in a virtual key figure calculation. The reason purely being that the CKF calculations happen after the Virtual KF/ Char calculations (through BAdI or CMOD).
The only solution i see here is that you will need to do the calculations in the VKF logic itself. Please do remember that VKF calculations and population happens for each record bein fetched into OLAP from the Infoprovider for the Filters put into the report.
Hope it helps.
Thanks,
Abhishek.

Similar Messages

Using selected output from a RFC as input for another RFC

Hi,
I'm new at this so I may be doing things completely wrong.
I have two models based on adaptive RFC.
The first populates a list of Org Units. (Orgeh_Out)
The user then selectes multiple Org Units from this list.
I want to use the selected Org Units as Input for the second RFC which will display the personnel numbers in the selected Org Units. (Orgeh_Tab_In)
Model 1 works fine but I am having difficulty in populating the Org Unit input table for the second model.
public void RFCPernrFill( )
    //@@begin RFCPernrFill()
     Z_Wd_Pernr_Input pernrInput = new Z_Wd_Pernr_Input();
     wdContext.nodePernrList().bind(pernrInput);
    int orgCount = wdContext.nodeOrgeh_Out().size();
      for (int i=0; i<orgCount; i++) {
            if (wdContext.nodeOrgeh_Out().isMultiSelected(i)) {
            IOrgeh_OutElement thisOrgUnit = wdContext.nodeOrgeh_Out().getOrgeh_OutElementAt(i);
          Zwd_Orgeh tmpOrgTab = new Zwd_Orgeh();
          String st = String.valueOf(thisOrgUnit);
          tmpOrgTab.setOrgeh(st);            //<-- Causes error but will only accept a String
          pernrInput.addOrgeh_Tab_In(tmpOrgTab);
I don't understand why tmpOrgTab.setOrgeh will only accept a String and not the 'thisOrgUnit' variable.
i.e. why couldn't I say tmpOrgTab.setOrgeh(thisOrgUnit) ?
The command tmpOrgTab.setOrgeh(st); causes an error however if I hard code a Org Unit tmpOrgTab.setOrgeh("5000011"); it works. The error I get is :
Type conversion error, field ORGEH, complex type class com.sap.com.testing.pernrlist.model1.Zwd_Orgeh

Hi
   Can you give me the structure of the proxy classes generated. I will give you the working code :).
The lines of code
Zwd_Orgeh tmpOrgTab = new Zwd_Orgeh();
String st = String.valueOf(thisOrgUnit);
tmpOrgTab.setOrgeh(st); //<-- Causes error but will only accept a String
pernrInput.addOrgeh_Tab_In(tmpOrgTab);
There is a structure in your RFC called ZWD_ORGEH.
Instantiate this like you have done.
Zwd_Orgeh tmpOrgTab = new Zwd_Orgeh();
Now the following line of code
tmpOrgTab.setOrgeh(st)
Here you say it is only accepting a string. But what i feel is that you would have another internal structure and u need to instantiate that.
Anyway if you just send me the proxy classes generated i will be able to help you in your code.
Also give me the structure of the RFC.
Meanwhile check this link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/webdynpro/effective web dynpro - adaptive rfc models
The above link will also give you some input to your prob.
regards
Ravi

How to use output of one query as an input for another

Hi Gurus,
can you give me any links on how to use an output of one query as an input for another (preferably if this can be done in a dynamic/on the fly way)?
thanks

You can use Replacement Path Variable for this purpose. See this detailed documentation.
http://help.sap.com/saphelp_nw04s/helpdata/en/bd/589b3c494d8e15e10000000a114084/content.htm
Abhijit
Edited by: ABHIJIT TEMBHEKAR on Nov 19, 2008 9:48 AM

Can I install Linux and then use the original Windows 8 OEM product key for a virtual machine on the same computer?

I have ordered a new laptop and expect to receive it in 2-3 weeks. The laptop comes with an OEM version of Windows 8 installed. I wish
to install Linux as the host operating system and create a virtual machine running Windows 8. Can I legally use the product key from the OEM installation to activate a virtual machine that will only be used on the laptop that had the original OEM installation?
If so, what is the procedure to activate the copy installed on the virtual machine?
This question has been addressed for Windows 7, but my searches did not reveal this question posed for Windows 8.

Technically, no. The OEM is licensed only for the physical hardware on the system. It isn't licensed for virtual hardware.
You may find you're unable to activate your OEM license in the VM. A lot of OEM Windows look for specific hardware to verify they're being installed on the correct hardware.
Although here: http://www.microsoft.com/oem/en/Pages/support-faq.aspx#fbid=Zh0SiBdas5I
Q. Can I install OEM on a virtual machine (VMware)?
A. You may install OEM in a virtual environment as long as you have a separate license for each instance of the software. It is fine to use the OEM version as long as it is properly licensed. To be clear, a separate version of software must be installed
for both the “standard” and “virtual” installations.
You still may not be able to activate if there is a hardware block.
The best place to ask this is to Microsoft licensing, any response you get here, including mine, won't hold up since it's not an official answer.
Q. Can I install OEM on a virtual machine (VMware)?
A. You may install OEM in a virtual environment as long as you have a separate license for each instance of the software. It is fine to use the OEM version
as long as it is properly licensed. To be clear, a separate version of software must be installed for both the “standard” and “virtual” installations.
edit: removed the duplicate Q&A

Input for CD Linear Simulation.vi in a Simulation Loop

Hi I'm new to LabView and I was trying to implement a real time estimator for a linear system, so a steady
state gain is acceptable (estimator doesn't need to be adaptive). It will be
implemented in real time target (cDAQ). The estimator will get the acquired
data (there are 2 inputs and 1 output) from the real system.
I have learned and tried few different ways to do it but finally decided to try using CD State
Estimator.vi (standalone) in a Simulation Loop. My questions are:
1. I found that the only way to use the estimator model with the acquired input is by
using CD Linear Simulation.vi. Is there another alternative to do the
estimation?
2. However, with CD Linear Simulation.vi I had problem: According
to the LabView help, if the input signals are more than 1, we have to specify
the input as 2D array with smaller dimension as the number of channels and the
larger dimension as number of points in each channel.
While for every execution in the loop I will get only 2 x 1 data (see appended array 3 in the
attached example file). How can I be able to use the measured data as the two
inputs for the CD Linear Simulation.vi?
Thank you.
Attachments:
2015_03_31_Test DAQ in sim loop.vi ‏299 KB

Hi Mike,
Thanks for the reply.
I browsed through some examples and tried some things; here are the updates, maybe useful for others in the future.
About the CD Linear Simulation.vi; In the example finder I found CDEx Kalman Filter.vi which uses CD Linear Simulation.vi to compare the estimation with real system states for two inputs. The number of samples of the inputs was given as a constant (e.g. N samples), from which the array of N x 2 data is built and fed to CD Linear Simulation.vi. So up to now I can’t see a way of using CD Linear Simulation for feeding input to the estimator model built from CD State Estimator.vi in a “real time “ way.
I look forward to hearing from anyone if it can be done.
So, from here I tried another alternative to implement this real time estimator: using Discrete State Space Function. So I generate the estimator state space model in Mathscript and feed it to that function.
I use kalman (mathscript) function to generate the estimator model.
Interesting thing is, (although irrelevant with my original enquiry), that this kalman command seems not generate correct estimator model with multiple input (e.g. if in the original system there are inputs u1 and u2 with one output y, I expect the generated estimator model would have three inputs i.e. u1, u2, and y. But the generated estimator only has one input (??)).
I remember that the kalman command from Matlab has the same problem which I neglected at that time.
So this time in labView I also did the same thing as the last time, which is taking the gain generated from the same kalman command and build manually the A and B matrices of the estimator.
I haven't browsed though to see if someone has used this kalman command for multi input system and noticed this.
Nevertheless, this alternative seems working well so hopefully it works well too with the RT target.
Thanks.

Cyrillic & East European language input for PB?

Is there any way to add native Cyrillic (Russian, Ukrainian) and other East European language (Polish, Bulgarian, Czech, Hungarian, Lithuanian, Estonian, Latvian) direct input for the virtual keyboard on the PlayBook?
Is RIM planning to add these in future updates?
Does anyone from RIM read these threads/posts?

Is there any way to add native Cyrillic (Russian, Ukrainian) and other East European language (Polish, Bulgarian, Czech, Hungarian, Lithuanian, Estonian, Latvian) direct input for the virtual keyboard on the PlayBook?
Is RIM planning to add these in future updates?
Does anyone from RIM read these threads/posts?

Use Period member in Calculation

I have a Hyperion Financial Report which has members in the Period dimension as Jan, Feb, March, etc. In my report, I need to make a calculation based on this month, for eg., If Month = May (I need the number of the month which is 5). For example, lets say I need to divide 12 over the current month number (12 / 5 <-Month number of May). So I need to convert the Month members to the appropriate numbers as Jan=1, Feb=2, Mar=3 and so on some how, and then use it in the calculation. How can this be achieved in Financial Reporting, if at all?
Edited by: 969915 on Nov 6, 2012 5:36 PM

Hi
I agree with the previous post, you should look to do this in the underlying database (Essbase?) but unlike the previous post I think you only need 1 account.
This is the way that Oracle did it for Capex and Workforce planning modules:
- Create a dyn calc account called TP-Index
- Set the formula to be:
IF (@ISMBR(Jan)) 1;
ELSEIF (@ISMBR(Feb)) 2;
ELSEIF (@ISMBR(Mar)) 3;
etc
ELSEIF (@ISMBR(Dec)) 12;
If you need a calendar and fiscal TP-Index then create a second account, e.g. if your year end is Mar then Apr=1, May=2 etc on the fiscal while the calendar remains Jan=1, Feb=2
I use this a lot! If you are looking to do run-rate calculations as your example of how you want to use this for May suggests then you could look to put that in the database as well (depending upon how many accounts you need to do that for). Generally speaking it is quicker to have a dyn calc in the database and simply retrieve the results than to have lots of formulae on the report.
Hope this helps
Stuart

I have a Sony radio in my car. With IOS 4 on my IPhone I could use the docking plug to the usb input on the radio and stream ESPN radio or pandora to the radio. After upgrading to IOS 5 on the phone the Sony radio will not recognize the phone . Any t

I have a Sony radio in my car. With IOS 4 on my IPhone I could use the docking plug to the usb input on the radio and stream ESPN radio or pandora to the radio. After upgrading to IOS 5 on the phone the Sony radio will not recognize the phone . Any thoughts.

I am reading on this site about the error I am getting and it wants me to change some files that I am not comfortable messing with. Mainly because it is like a foreign language. Will the store do this for me or tell me if it is neccessary?

How to use Results from Another Query for SAP BW universes

Hi Everyone,
I have two SAP BI universes.In my First universe I have Sales Doc no (dimension) and Orderqty (Measure) and in my second universe I have Sales Doc no(Dimension) and BillQty (Measure).
Here in my first dataprovider I have 1200 rows of data and in second dataprovider I have 75,000 rows. The report should fetch only the BillQty details that matches to corresponding Sales doc no in first data provider.
I want to place all these fileds into a single report like as shown.
(Datarpovider1) (Datarpovider1) (Datarpovider2)
*Sales Doc No* Orderqty BillQty
Here I am able to generate single report using merge dimension but it is leading to performance issues. I want to restrict the values at query level by passing the First dataprovider Sales doc no to second Data provider Sales doc number using Results from Anothery Query feature so that It can fetch only the matching records.
I tried it but it was giving the follwing error:
A filter contains a wrong value. You cannot run this query. (Error: WIS 00007)
How Can I get rid of this error. Can we use Results from Anothery Query option for OLAP universe. Are there any limitation on it.
All this I am doing in Webi Rich Client.
Appreciate your help
Thanks &in Advance
Kiran Saka

Hi Kiran,
I think the filter has a wrong operand. For example, a filter with an empty constant, or a filter that deals with numeric values is defined with an alphanumeric value.Check out for this.
Regards,
Neeraj

Help needed in mapping BI query output to use as input for BAPI

Hi,
After wrestling with it for quite some time I choose to ask yet another question here. I want to use the output of a BI query I use as input for a BAPI. I just can not get the mapping correctly:
The query delivers: 104908BA092F7501F5E1008000829000AC
I need: 104908BA092F7501F5E1008000829000AC
How can I lose the two first digits? Thanks in advance!
Best regards,
Jan

Nevermind. I found out myself. I am now using the statement MID(@GUID,2,32) in the connection.

I was given an assingment, but have no idea where to begin. The assingment is to create a text file using notepad with all of my digital inputs and some how make those imputs show up on my digital indicators on my control pannel

I was given an assingment, but have no idea where to begin. The assingment is to create a text file using notepad with all of my digital inputs and some how make those imputs show up on my digital indicators on my control pannel.
When it was explained to me it didn't sound to hard of a task, I have no LabVIEW experience and the tutortial sucks.

StevenD: FYI, I did NOT give you the one star rating. I would never do that!
StevenD wrote:
Ow. Someone is grumpy today.
Well, this is an assignment, so it is probably homework.
Why else would anyone give HIM such an assigment, after all he has no LabVIEW experience and the tutorials are too hard for him?
This would make no sense unless all of it was just covered in class!
This is not a free homework service with instant gratification.
OK! Let's do it step by step. I assume you already have a VI with the digital indicators.
"...but have no idea where to begin".
open notepad.
decide on a format, possibly one line per indicator.
type the document.
close notepad.
open LabVIEW.
Open the existing VI with all the indicators.
(are you still following?)
look at the diagram.
Who made the program?
Does the code make sense so far?
Is it a statemachine or just a bunch of crisscrossed wires?
Where do you want to add the file read?
How should the file be read (after pressing a read button, at the start of the program ,etc.)
See how far you get!
Message Edited by altenbach on 06-24-2008 11:23 AM
LabVIEW Champion . Do more with less code and in less time .

Can we use Result from another query in Webi using Bex uery universe?

Hi,
Can we use Result from another query filter option in Webi to create a report using a Bex Query universe?
I need to create a report using two universes, one is Bex Query Universe and the other is Orcle universe. I have two queries, one is using Oracle universe; the other using Bex Query universe. I need to pass the Oracle data from the Oracle query to the Bex Query query to get the matched data from SAP Bex query.
I used Result from another query in the query filter panel for the query using Bex query universe. But I got an error saying that 'A filter contains a wrong value. you cannot run this query. (Error: WIS 00007). The data used in the filter on both sides are the same. they are char.
I have tested by using two queries from the same Bex query universe to see if the Result from another query filter option works. And I got the same error.
Has anyone run into the same issue and if this is possible and what should be the solution?
Thanks in advance!
Edited by: BO_Haiyan on Oct 6, 2010 3:47 PM

In that situation:
Create two queries : Oracle and BW query.
@ Report:
As you have to see result set from both the Dataproviders, correct? To achieve thise one must have common dimension objects to merge them at report and use Objects those are coming from both queries to use them in single Table/Report.
Unless you don't use Merge Dimensions, you don't get a chane to use both queries objects in single Table/Report. (It will give tooltip saying: You can't drop here -- Incompatable Objects)
In case, if you don't have common dimensions, change object definitions to Detail objects, for those required.
Hope it helps you.
Thank You!!

Calculated view with input parameters

Hello there.
I've created a calculated view with input parameters, which I am going to call it 'VIEW_A'.
This view has been working just fine.
But now I have to create another calculated view and import the last one(VIEW_A) in a projection.
But I got a error when trying to see the data content.
It says :
Error: SAP DBTech JDBC: [2048]: column store error: search table error: [6968] Evaluator: syntax error in expression string;expected TK_ID,parsing '"DT_DOC_MES_ANO" >= [here]and "DT_DOC_MES_ANO" <='
At the 'Problems' panel it says the all the input parameters are unmapped.
What Am I doing wrong? Sorry but I am kind new at SAP world.

http://scn.sap.com/message/15489475Hello Tiago,
Could you please let me know if you're able to resolve your issue, I'm getting the similar error when I'm passing alpha numeric values as parameter via my SP.
Thanks for your help in advance!
Regards,
Sathish

Use XML files stored in directory of Application server as a input for XI ?

I have a scenario that there is a xml file stored in sap application server for example /inf/ERQ/XML/XXX.xml which i want to use it as an input for XI. I know that there is an adapter in XI for getting xml file stored in normal path but in my situation it's in application server of SAP so i don't know how to do this.
Any solution or example for this? Thank you in advance.
Best regards

Hi,
We can read this file through FILE adapter with FTP protocol, before that i think need permission from basis for access. Configure source(according to xml format) and target structure according to your requirement. But one thing should remember in XI/PI sour/target XML formats should contain Message type name & namespace name else it can't work.
Find below link for more information.
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)

Unable to use runtime prompts in calculation manager

Hi All,
I am unable to use runtime prompts in calculation manager (11.1.2.0).
In Variable Designer I have selected global and created a Replacement variable with name "Entity" and selected Type as "Member" and Default Value as "Entity" from dimension list, checked the check box "rtp".
In FIX (i.e., Member Range) I’m selecting this variable for Entity dimension, and validating this rule without any errors. And during deployment it is not prompting for Entity and directly a message appears that deployment was successful.
My requirement is i should select a Entity member during runtime. Please help me out.
Thanks.

Are you accessing workspace url remotely on client machine?
Can you try accessing the url on the server and check whether you can see the app in the Calc manager?
Thanks
Madhavi

Using result of a Calculated Keyfigure as input for a Virtual Keyfigure

Similar Messages

Maybe you are looking for