Using Sections To Tie Two Rows Together

I use the section capability to join two rows together. I have a button that will duplicate the section. Which on the screen shows perfectly. However, when you save the file, and open it back up it does not maintain those sections. It combines them into one. look at this example:
TABLE 1
ROW 1: element1, element2 -- Row 1&2 are group as a section
ROW 2: element1, element2
User press the add button:
Table 1
ROW 1: element1, element2 -- So when the user press the add button it duplicates the section to add two more rows in order
ROW2: element 1, element2
ROW3: element 1, element2
ROW4: element 1, element2
The user now saves the form and exits...
The user lanuches reader and opens the form. they see the follow result...
ROW1: element1, element2
ROW3: element1, element2
ROW2: element1, element2
ROW4: element1, element2
I need the section to stay together... Any suggestions of what can be done?
Regards

Uncheck the checkbox for the "Repeat Row for each Data Item" in the Bidning tab for Row2 and Row3 inside the Section.
You are actually creating a new instance of the section (which includes Row2 and Row3). So this check box should be checked at the Section levl not at the Row level. You have already checked the Section property so remove from Row 2 and Row3.
Thanks
Srini

Similar Messages

Tie two songs together

I'd like to be able to tie two songs together so they always play back to back, yet in a complete shuffle mode. For instance Van Halen's Eruption / You Really Got Me Down. They appear as separate songs on the CD, so they play randomly on the shuffle. Is there a way to tie pairs of songs together?
Thanks

You can join tracks when importing from the CD. Insert your CD highlight the songs you want to join and choose "Join CD Tracks" from the Advanced menu and import: Adding songs from CDs to your library

Copy data of two rows together into a new row

Hello everyone.
I have a question about copying data of two existing rows together into a new third row.
See this short example:
This is the current situation. The rows STATE_1 and STATE_2 contain different separated information.
In the past data were saved randomly in one of those rows.
This is the table State:
ID
Cust_ID
STATE_1
STATE_2
STATE_3
1
88
Customer is waiting.
Call from yesterday.
2
11
Mr. Smith, no answer.
Waiting until December
3
11
Pls create PO.
Old PO was cancelled
4
5
No access to system.
From now on everything has to be saved to the empty STATE_3 but I also need the old entries from the past which also have to be copied together into STATE_3
like this:
ID
Cust_ID
STATE_1
STATE_2
STATE_3
1
88
Customer is waiting.
Call from yesterday.
Customer is waiting. Call from yesterday
2
11
Mr. Smith, no answer.
Waiting until December.
Mr. Smith, no answer. Waiting until December.
3
11
Pls create PO.
Old PO was cancelled.
Pls create PO. Old PO was cancelled.
4
5
No access to system.
No access to system.
Is there an easy SQL-command?
Thanks for any help.

Hi,
DB2000 wrote:
Hello everyone.
I have a question about copying data of two existing rows together into a new third row.
See this short example:
This is the current situation. The rows STATE_1 and STATE_2 contain different separated information.
In the past data were saved randomly in one of those rows.
This is the table State:
ID
Cust_ID
STATE_1
STATE_2
STATE_3
1
88
Customer is waiting.
Call from yesterday.
2
11
Mr. Smith, no answer.
Waiting until December
3
11
Pls create PO.
Old PO was cancelled
4
5
No access to system.
When you say "row", do you mean "column"?
DB2000 wrote:
Because in this case STATE_1 and STATE_2 are only text of a log file/history.
So I think 1NF isn't really violated and because of performance of the database in this case it's better to put obsolete rows together.
Why do you think that?
The definition of First Normal Form is that every column of every row contains 1 piece of information, not a variable number of pieces. Whether or not that data is only text of a log file/history has nothing to do with it.
You might claim you have good reasons (such as performance) for violating First Normal form, but you can't say that you're not violating it.

How to link two rows together? Weights should be tied to returns!!

Hello CB experts! I have a question. It may be simple or it may not; not sure. So, I’m looking for some guidance here. I have historical return on my sheet named ‘Symbols’. In my ‘Returns’ sheet, I have Shares, Return, Volatility, and Weights, along with a Covariance Matrix and a Correlation Matrix on the sheet. I put an Efficient Frontier curve in there and the top performing components of the Dow. I also, have a sheet named ‘Returns-CB’; this is where my CB analysis is. So, from E6:AH6 and E8:AH8, I have defined CB assumptions (they are pretty much all the same). Anyway, my question is this: how do I link the items in row 6 to the items in row 8? If I have 12% return and 30% return for stock AA and stock BA, I should NOT have 0% weight; I want to invest in these stocks. Similarly, if I have a weight of 15% for stock CAT, I should NOT have 0% return. This doesn’t make any sense. Can someone please tell me how to link the returns and weights. It works perfectly fine in the ‘Returns’ sheet; I used MS Solver to get this working. I was trying to do something similar in the ‘Returns-CB’ sheet.
You can download the file from here:
http://www.mediafire.com/view/?5lk0gtcd261cy3c
Thanks everyone!!

I know this has something to do with constraints. For instance, Cell C8 must = 100%. Cells E8:AH8 will change, depending on the weights of the stocks (this is contingent on risk; defined assumptions and parameters of the distribution curves). Likewise, Cells E6:AH6 must change, depending on the potential future returns of the stocks (this is also contingent on the risk). It seems like, if I define an assumption, it wipes out any formula that I have in the cell. So, I'm not sure how to 'link' the E6:AH6 range and the E8:AH8 range. Does anyone here have any ideas on this?

Question on "tying" two queries together

I get an error when I run the following code (shown below).
Why can't I "tie" these 2 queries together like this?
Both run fine by themselves and give me good data, I just need to tie them together.
This is for a beginning sql class, so I all I really want is an explanation as to why this is not allowed.
I'm not finding the answer in the book I have.
Any insight for a newb appreciated!
SQL> SELECT order#, isbn, title, SUM(quantity) AS SubTotal
2        FROM orderitems RIGHT OUTER JOIN books USING (isbn)
3        GROUP BY order#, isbn, title
4        ORDER BY order#
5 WHERE (isbn, title) IN
6                     (SELECT isbn, title
7                       FROM books
8                       WHERE retail - cost >
9                                        (SELECT AVG(SUM(retail - cost))
10                                         FROM books
11                                        GROUP BY isbn));
WHERE (isbn, title) IN
ERROR at line 5:
ORA-00933: SQL command not properly ended

Hi,
When the following clauses are used, they always have to be in this order:
WHERE
GROUP BY
ORDER BY
You can skip any (or all) of these, but when you use them, they have to come in that order.
Move the WHERE-clause (the whole thing, up to, but not including, the semicolon) before the GROUP BY clause.

Working two ipads together ...

I'm wondering what the best way would be to tie two iPads together.. the audio.. I'm wondering if they even make a iphone jack with those three ring connectors on both ends?
any ideas?

I would expect to find such a cable. Have you Googled for one? I would search for:
3.5 mm male-male headphone/microphone cable
Just curious, what are your trying to accomplish?

Merging two rows into a single row

Hi ,
I wish to merge few columns of tow rows into a single row.
if i use union it gives two rows as o/p.
What is the exact sql statement for that?
Thanks

Hi Sridhar,
This is my code for merging and i used union.
Suggest me good solution.
CREATE OR REPLACE VIEW INSPECTINT.INSPECT_LOC_TRACKING_RPT_VIEW AS
SELECT
VEN_COMPANY_NAME VEN_COMPANY_NAME,
VEN_COMPANY_NAME_2 VEN_COMPANY_NAME_2,
VEN_CONTACT_FIRST_NAME VEN_CONTACT_FIRST_NAME,
VEN_CONTACT_MIDDLE_NAME VEN_CONTACT_MIDDLE_NAME,
VEN_CONTACT_LAST_NAME VEN_CONTACT_LAST_NAME,
VEN_ADDRESS_LINE_1 VEN_ADDRESS_LINE_1,
VEN_ADDRESS_LINE_2 VEN_ADDRESS_LINE_2,
VEN_CITY VEN_CITY,
VEN_CNT_COUNTY_CODE VEN_CNT_COUNTY_CODE,
VEN_STC_STATE_CODE VEN_STC_STATE_CODE,
VEN_ZIP_CODE VEN_ZIP_CODE,
VEN_PHONE_NO_1 VEN_PHONE_NO_1,
VEN_PHONE_EXTN_1 VEN_PHONE_EXTN_1,
VEN_PHONE_NO_2 VEN_PHONE_NO_2,
VEN_PHONE_EXTN_2 VEN_PHONE_EXTN_2,
VEN_FAX_NO_1 VEN_FAX_NO_1,
VEN_VENDOR_NO VEN_VENDOR_NO,
VEN_APV_AP_VENDOR_ID VEN_APV_AP_VENDOR_ID,
VEN_EMAIL_ADDRESS VEN_EMAIL_ADDRESS,
--all these should be null
to_number(NULL) PHY_LCN_PARAMETER_ID,
to_char(NULL) PHY_LCN_CURRENT_ADDRESS_IND,
to_char(NULL) PHY_LCN_STATUS_CODE,
to_char(NULL) PHY_LCN_LTY_LOCATION_TYPE,
to_char(NULL) PHY_LCN_ADT_ADDRESS_TYPE,
to_char(NULL) PHY_LCN_HOUSE_NO,
to_char(NULL) PHY_LCN_ADDRESS_LINE_1,
to_char(NULL) PHY_LCN_ADDRESS_LINE_2,
to_char(NULL) PHY_LCN_CITY,
to_char(NULL) PHY_LCN_STC_STATE_CODE,
to_char(NULL) PHY_LCN_ZIP_CODE,
to_char(NULL) PHY_LCN_CNT_COUNTY_CODE,
to_date(NULL) PHY_END_DATE,
to_number(NULL) PHY_LCN_VEN_VENDOR_ID_GTA,
to_char(NULL) PHY_LCN_SUB_LOCATION_GTA,
to_char(NULL) PHY_LCN_DIRECTION_GTA,
---all these should be null
to_char(NULL) LOW_LCN_PARAMETER_ID,
to_char(NULL) LOW_LCN_CURRENT_ADDRESS_IND,
to_char(NULL) LOW_LCN_STATUS_CODE,
to_char(NULL) LOW_LCN_LTY_LOCATION_TYPE,
to_char(NULL) LOW_LCN_ADT_ADDRESS_TYPE,
to_char(NULL) LOW_LCN_HOUSE_NO,
to_char(NULL) LOW_LCN_ADDRESS_LINE_1,
to_char(NULL) LOW_LCN_ADDRESS_LINE_2,
to_char(NULL) LOW_LCN_CITY,
to_char(NULL) LOW_LCN_STC_STATE_CODE,
to_char(NULL) LOW_LCN_ZIP_CODE,
to_char(NULL) LOW_LCN_CNT_COUNTY_CODE,
to_char(NULL) LOW_LCN_LANDLORD,
to_number(NULL) LOW_LCN_LANDLORD_PHONE,
to_date(NULL) LOW_END_DATE,
to_char(NULL) LOW_LCN_SUB_LOCATION_GTA,
to_char(NULL) LOW_LCN_DIRECTION_GTA
FROM LOCATIONS LOC , VENDORS VEN
WHERE LOC.LCN_VEN_VENDOR_ID_GTA IS NOT NULL
AND LOC.LCN_VEN_VENDOR_ID_GTA = VEN_VENDOR_ID
AND LOC.LCN_LTY_LOCATION_TYPE ='AS'
UNION ALL
SELECT
to_char(NULL) VEN_COMPANY_NAME,
to_char(NULL) VEN_COMPANY_NAME_2,
to_char(NULL) VEN_CONTACT_FIRST_NAME,
to_char(NULL) VEN_CONTACT_MIDDLE_NAME,
to_char(NULL) VEN_CONTACT_LAST_NAME,
to_char(NULL) VEN_ADDRESS_LINE_1,
to_char(NULL) VEN_ADDRESS_LINE_2,
to_char(NULL) VEN_CITY,
to_char(NULL) VEN_CNT_COUNTY_CODE,
to_char(NULL) VEN_STC_STATE_CODE,
to_char(NULL) VEN_ZIP_CODE,
to_number(NULL) VEN_PHONE_NO_1,
to_number(NULL) VEN_PHONE_EXTN_1,
to_number(NULL) VEN_PHONE_NO_2,
to_number(NULL) VEN_PHONE_EXTN_2,
to_number(NULL) VEN_FAX_NO_1,
to_char(NULL) VEN_VENDOR_NO,
to_char(NULL) VEN_APV_AP_VENDOR_ID,
to_char(NULL) VEN_EMAIL_ADDRESS,
decode(lcn_adt_address_type,'P',to_number(LCN_PARAMETER_ID),to_number(NULL)) PHY_LCN_PARAMETER_ID,
decode(lcn_adt_address_type,'P',LCN_CURRENT_ADDRESS_IND,to_char(NULL)) PHY_LCN_CURRENT_ADDRESS_IND,
decode(lcn_adt_address_type,'P',LCN_STATUS_CODE,to_char(NULL)) PHY_LCN_STATUS_CODE,
decode(lcn_adt_address_type,'P',LCN_STATUS_CODE,to_char(NULL)) PHY_LCN_LTY_LOCATION_TYPE,
decode(lcn_adt_address_type,'P',LCN_ADT_ADDRESS_TYPE,to_char(NULL)) PHY_LCN_ADT_ADDRESS_TYPE,
decode(lcn_adt_address_type,'P',LCN_HOUSE_NO,to_char(NULL)) PHY_LCN_HOUSE_NO,
decode(lcn_adt_address_type,'P',LCN_ADDRESS_LINE_1,to_char(NULL)) PHY_LCN_ADDRESS_LINE_1,
decode(lcn_adt_address_type,'P',LCN_ADDRESS_LINE_2,to_char(NULL)) PHY_LCN_ADDRESS_LINE_2,
decode(lcn_adt_address_type,'P',LCN_CITY,to_char(NULL)) PHY_LCN_CITY,
decode(lcn_adt_address_type,'P',LCN_STC_STATE_CODE,to_char(NULL)) PHY_LCN_STC_STATE_CODE,
decode(lcn_adt_address_type,'P',LCN_ZIP_CODE,to_char(NULL)) PHY_LCN_ZIP_CODE,
decode(lcn_adt_address_type,'P',LCN_CNT_COUNTY_CODE,to_char(NULL)) PHY_LCN_CNT_COUNTY_CODE,
decode(lcn_adt_address_type,'P',END_DATE,to_char(NULL)) PHY_END_DATE,
decode(lcn_adt_address_type,'P',LCN_VEN_VENDOR_ID_GTA,to_char(NULL)) PHY_LCN_VEN_VENDOR_ID_GTA,
decode(lcn_adt_address_type,'P',LCN_SUB_LOCATION_GTA,to_char(NULL)) PHY_LCN_SUB_LOCATION_GTA,
decode(lcn_adt_address_type,'P',LCN_DIRECTION_GTA,to_char(NULL)) PHY_LCN_DIRECTION_GTA,
decode(LCN_ADT_ADDRESS_TYPE,'D',LCN_PARAMETER_ID,to_char(NULL)) LOW_LCN_PARAMETER_ID,
decode(LCN_ADT_ADDRESS_TYPE,'D',LCN_CURRENT_ADDRESS_IND,to_char(NULL)) LOW_LCN_CURRENT_ADDRESS_IND,
decode(LCN_ADT_ADDRESS_TYPE,'D',LCN_STATUS_CODE,to_char(NULL)) LOW_LCN_STATUS_CODE,
decode(LCN_ADT_ADDRESS_TYPE,'D',LCN_LTY_LOCATION_TYPE,to_char(NULL)) LOW_LCN_LTY_LOCATION_TYPE,
decode(LCN_ADT_ADDRESS_TYPE,'D',LCN_ADT_ADDRESS_TYPE,to_char(NULL)) LOW_LCN_ADT_ADDRESS_TYPE,
decode(LCN_ADT_ADDRESS_TYPE,'D',LCN_HOUSE_NO,to_char(NULL)) LOW_LCN_HOUSE_NO,
decode(LCN_ADT_ADDRESS_TYPE,'D',LCN_ADDRESS_LINE_1,to_char(NULL)) LOW_LCN_ADDRESS_LINE_1,
decode(LCN_ADT_ADDRESS_TYPE,'D',LCN_ADDRESS_LINE_2,to_char(NULL)) LOW_LCN_ADDRESS_LINE_2,
decode(LCN_ADT_ADDRESS_TYPE,'D',LCN_CITY,to_char(NULL)) LOW_LCN_CITY,
decode(LCN_ADT_ADDRESS_TYPE,'D',LCN_STC_STATE_CODE,to_char(NULL)) LOW_LCN_STC_STATE_CODE,
decode(LCN_ADT_ADDRESS_TYPE,'D',LCN_ZIP_CODE,to_char(NULL)) LOW_LCN_ZIP_CODE,
decode(LCN_ADT_ADDRESS_TYPE,'D',LCN_CNT_COUNTY_CODE,to_char(NULL)) LOW_LCN_CNT_COUNTY_CODE,
decode(LCN_ADT_ADDRESS_TYPE,'D',LCN_LANDLORD,to_char(NULL)) LOW_LCN_LANDLORD,
decode(LCN_ADT_ADDRESS_TYPE,'D',LCN_LANDLORD_PHONE,to_char(NULL)) LOW_LCN_LANDLORD_PHONE,
decode(LCN_ADT_ADDRESS_TYPE,'D',END_DATE,to_char(NULL)) LOW_END_DATE,
decode(LCN_ADT_ADDRESS_TYPE,'D',LCN_SUB_LOCATION_GTA,to_char(NULL)) LOW_LCN_SUB_LOCATION_GTA,
decode(LCN_ADT_ADDRESS_TYPE,'D',LCN_DIRECTION_GTA,to_char(NULL)) LOW_LCN_DIRECTION_GTA
FROM LOCATIONS LOC
WHERE (LCN_LTY_LOCATION_TYPE ='AS' OR LCN_ADT_ADDRESS_TYPE='D')
AND LCN_CURRENT_ADDRESS_IND ='Y'
thanks

Is there a way to tie to iPads together so that when you turn a page with a tap on one, both iPads turn a page. I am using the ipad to replace piano sheet music. The challenge is that ordinary sheet music is on both a left and right page.

We are trying to use an ipad to replace ordinary paper sheet music on a piano. When truning ordinary paper pages, it is sometimes hard to grasp one page, turn it quickly and get it to stay turned. The idea with using an ipad is that a tap turns the page, it stays turned. However,,,,,ordinary sheet music is on both left and right pages. With one turn you get 2 new pages. The ipad, being smaller results in only one page and therefore twice as many page turn taps; more taps equals less hands on the piano. If we could tie 2 ipads together and get them both to turn the page simultaneously it would be nice. We are trying to get used to using the ipad. We are using ForScore app to get sheet music into the ipad; we could load one with odd pages and one with even pages. Maybe this is getting too complicated.
Anyway to tie 2 units together
John

No way to control one device from the other. But, according to ForScore, you should be able to display two sheets side by side in landscape mode (2-up view)? Not sure if that helps as it must make the actual print smaller to do so.
http://www.forscoreapp.com/about/#interface

In the output data is coming in two rows instead of the onerow using report

HI ,
I am trying include two cloumns in the existing report layout ,But the output is coming in two rows.
I tried to increase page width in the layout sections and also rebulid the layout using the test data ,For test data is coming fine ,when i ran the concurrent program some records is coming in two rows .
Can any one help ,how to map the columns according the data and increase the width in the report layout .
Thanks
Narendra.

Do a right mouse click on the left, gray row marker => "Insert Row"=> "Inside Group
- Above or Below", then you get a second detail row.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Adding every other field of two separate rows together.

Hi,
We're using Oracle 11.1.
I's like to add two rows from two different queries together,
I'd like it to look something like:
with
a as
( select 'a' q,'b' r,'c' s,'d' t,'e' u from dual),
b as
( select '1' q, '2' r,'3' s,'4' t,'5' u from dual)
select a.q, b.r, a.s, b.t, a.u from a, b;The trouble is I'm already using WITH and both the 'real queries' get their data from the progressive WITH statements already up top.
I'd like to add every other field from each query to a result row.
I have to use only SQL.
Is there a way I can use UNION and combine the rows using dummy fields for the fields I don't want to use?
Some something like
I know this isn't right but...it sort of what I want to do.
select * from
( select 'a' q,' ' r,'c' s,' ' t,'e' u from dual
union
select '1' q, '2' r,' ' s,'4' t,' ' u from dual);Anybody?

Can u try using join.
select a.q, b.r, a.s, b.t, a.u from
(select 'a' q,'b' r,'c' s,'d' t,'e' u from dual) as a,
( select '1' q, '2' r,'3' s,'4' t,'5' u from dual) as b;
This will result in a Cartesian join, but if you have a common column between a & b, then you can use it in the where clause.

When using private browsing to view image results in Safari 5.1.3, only the first two rows of results are visible, the following four or so rows display greyed out place holders, and the safe search button is inoperable. Suggestions?

When using private browsing to view image results in Safari 5.1.3, only the first two rows of results are visible, the following four or so rows display greyed out place holders, the remainder of the results page is blank, and the safe search button is inoperable. When I turn off private browsing and refresh the page, everything works again.
Anyone else having this problem?

I have got the same behaviour after the last Safari Update to 5.1.3. It seems that Safari now handles some scripts in a new way. If you debug the Google Website, you will see, that there is some Javascript Error, that seems to prevent to write into local cache. After some searching I wasn't able to finde a solution for this problem, other then disabling Javascript while private browsing to prevent the script loading. You then are able to use Google with the old layout. The option to disable JavaScript can be found in the Menu "Developer", wich has to be enabled in Safari in the options first.
In my opinion this is a bug that is now occuring, because Apple changed something in private browsing and that has to be fixed by Google now, to run again. Or we will have to wait for 5.1.4, as you can read online Apple will change and bugfix the javascript engine in that version, perhaps this fixes the problem as well. I hope so!
If anyone is in the developer program perhaps you could test this with the beta of 5.1.4 and tell us if it works.

Addition of two rows values in table using formatted search

hi all,
i have created one UDF field in market document rows, now in AR invoice i need to add the values in the UDF fields of two rows, want to show it in anather outside UDF in title. kindly suggest me some query to track that.
Ex:- i had entered two items in rows and
for first UDF row i have given 20
for second UDF row i have given 30.
now i need to show sum of the two UDF in two rows in title UDF.
kindly give me some query used for formatted search to do this task.
regards
sandip

Sandip,
To the best of myknowledge When you try to take the row value to the header the results of the Formatted Search are not consistent.
but for your interest, I am giving below the logic to work this out.
You need two Header level user fields. One to copy the row user fields value and the other to store the sum.
You can create a simple SQL "SELECT $[$38.U_UserFieldName] (substitute with row level user field name) and attach it to the first header level user field and make it Auto refresh on doc total.
Then Attached SQL "SELECT $[ORDR.U_HeaderUserField1] + $[ORDR.U_HeaderUserField2]"
The results could be flaky because the header user field takes the value of the active row and sometime it only considers the first row active though you might be entering the second row of data.
My recommendation would be to Use The Transaction Notification Stored Procedure for this by which you can be absolutely sure that the Header User field will have the sum.
Let me know if you need directions for this.
Regards
Suda

Trying to use ALL_TAB_COLS to find two tables based on input rows

I'm using 9i.
I'm trying to use the ALL_TAB_COLS table to find two tables that contain columns I can join them on. I know the names of the two tables. We can call them table1 and table2. I just using the columns that are stored in them below to find a common set of tables.
The query I'm using is the following
select distinct did.TABLE_NAME, did.COLUMN_NAME
from
    (Select * from ALL_TAB_COLS
    where column_name in('SO_LINE_ID','SO_LINE_NUMBER', 'SO_ORDER_NUMBER', 'SO_HEADER_ID','AR_CUSTOMER_TRX_LINE_ID')
    --and OWNER = 'FTBV'
    ) did
join
    (Select * from ALL_TAB_COLS
    where column_name in('SCHED_DISTRIBUTION_ID', 'CODE_COMBINATION_ID', 'PRODUCT_BUSINESS_CODE', 'PRODUCT_GROUP_CODE', 'PRODUCT_CODE')
    --and OWNER = 'FTBV'
    ) iii
on did.TABLE_NAME = iii.TABLE_NAME;It's giving me limited results.
What I need is something that can find interim tables that would link my two tables together based on the unique columns I've provided. Does such a query exist?
Thanks in Advance.

Only if there is a defined foreign key relationship. If there is one the queries you want are on the Constraints page of Morgan's Library at www.psoug.org. If they do not exist then you need to find a subject matter expert that can explain the application's design.
The fact that you are asking this question is a strong indication of a lack of proper documentation at your facility: Something you might wish to address.

Showing report data columns into two rows instead of one row using SSRS 2012

Hi All,
I have a ssrs report with 13 columns and I want to show those 13 columns data into two rows instead of showing in one row. please send me step by step process.
id     fullname     firstname      lastname        mailingaddress     billingaddress
city       state       zipcode
1       ABC                A                  C
    xyz                      xyz123                   york
PA         12345
homephone     cellphone          workphone          company
1234567890      4567890123    0123456789         ABC,Inc
id     fullname     firstname      lastname        mailingaddress     billingaddress
city          state     zipcode
2        XYZ               X                  Z
     abc                     abc123           lewisburg
PA      54321
homephone     cellphone           workphone        company
4567890123      0123456789     1234567890         xyz,Inc
id     fullname     firstname      lastname        mailingaddress     billingaddress
city          state     zipcode
3       BCD                  B                  D
123abc                 xyz123               leesburg       PA
54123
homephone     cellphone          workphone        company
4567895623      0783456789     1238967890      Hey,Inc
Thanks in advance,
RH
sql

Do a right mouse click on the left, gray row marker => "Insert Row"=> "Inside Group
- Above or Below", then you get a second detail row.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Table section with 3 header rows pagination issue

Hi experts.
I have a table section pagination issue. In my case the table section combines 3 header rows.
Down bellow the series of screenshots I hope they describe my example well (click on screenshots to enlarge).
1) The data context
2) Layout elements
Here is my issue (table header output at the end of the page but there is no data row):
As you can see on the first page there is no more place for a data row but the header still exists.
if I set keep with next flag on the pagination tab for all header rows the result will be:
Is it possible somehow to fix it?
I would like to have the header row output on the page only if a data row exists bellow the header, the footer should only output if a data row exists above.
Here is PDF output:
https://docs.google.com/viewer?a=v&pid=explorer&chrome=true&srcid=0B4wQz1XhRuysMzhiN2EyYzM tMDdjZS00Yzc3LWIyNTgtODUzZWRhY2MwYjMx&hl=en_US
https://docs.google.com/viewer?a=v&pid=explorer&chrome=true&srcid=0B4wQz1XhRuysNmYxNGFlOTk tZGQ2MS00MDQ3LTgyMWUtZTg4YmEwYWRmMWQ4&hl=en_US

The solutions is easy. You´d better create the corresponding DDIC objects hierarchy in the backend and then use the form to PRINT the prepared data ONLY. I mean:
In your backend:
in a row there is a dataset (table) and a optional dataset (table) == DDIC structure with two "fields" of type "table" = row A
use this "row" to create the "outer" table == DDIC table type with row A
Then you can just drag and drop this structure in your adobe form and will have do difficult with formatting.
Regards Otto

Using Sections To Tie Two Rows Together

Similar Messages

Maybe you are looking for