Using slim and xfce4, something crashes on exit

I recently did a fresh install of Arch onto an older PC that I have. It's running a P4 3.06GHz, an nVidia GeForce FX 5900, and 1GB RAM. Because of the lower resources, I decided to use xfce4 and slim. I have a monitor and TV hooked up through s-video with the "seperate X screen" option. Whenever I logout of xfce (this includes, logout, reboot, shutdown), it goes to a blank black screen with a cursor at the top left and just hangs. I have slim configured to run from inittab, so it picks up after a couple seconds. However, if I run startx from console, and then logout of xfce the system just hangs and wont accept any keyboard input (including ctrl+alt+function to switch run levels). Also, if I choose to shutdown or reboot, the system will do so but the only thing I see is the blank screen until the POST. If I do a startx from console, the logout, I'm able to ssh in from my laptop, login and issue a reboot (again the screen doesn't change until the POST). Also, if I turn the "seperate x screen" option off, and just run the desktop on the monitor, it doesn't freeze. I've worked my way through a number of issues so far, but this one has me completely stumped. I'm not sure if there's something wrong with my configuration or if it's just a problem with the graphics driver. Any advice and/or help is greatly appreciated.
Here are configuration and log files:
Xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder75) Wed Jan 27 03:03:53 PST 2010
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "BlankTime" "0"
Option "StandbyTime" "0"
Option "SuspendTime" "0"
Option "OffTime" "0"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "dri2"
Load "dri"
Load "dbe"
Load "record"
Load "extmod"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
Option "DPI" "95 x 96"
ModelName "CMO CMC 17 AD"
HorizSync 30.0 - 82.0
VertRefresh 50.0 - 75.0
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "TV-0"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NV35 [GeForce FX 5900]"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce FX 5900"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Videocard1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce FX 5900"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "CRT: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Videocard1"
Monitor "Monitor1"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "TV: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
slim.conf
# Path, X server and arguments (if needed)
# Note: -xauth $authfile is automatically appended
default_path ./:/bin:/usr/bin:/usr/local/bin
default_xserver /usr/bin/X
xserver_arguments -nolisten tcp vt07
# Commands for halt, login, etc.
halt_cmd /sbin/shutdown -h now
reboot_cmd /sbin/shutdown -r now
console_cmd /usr/bin/xterm -C -fg white -bg black +sb -T "Console login" -e /bin/sh -c "/bin/cat /etc/issue; exec /bin/login"
#suspend_cmd /usr/sbin/suspend
# Full path to the xauth binary
xauth_path /usr/bin/xauth
# Xauth file for server
authfile /var/run/slim.auth
# Activate numlock when slim starts. Valid values: on|off
# numlock on
# Hide the mouse cursor (note: does not work with some WMs).
# Valid values: true|false
# hidecursor false
# This command is executed after a succesful login.
# you can place the %session and %theme variables
# to handle launching of specific commands in .xinitrc
# depending of chosen session and slim theme
# NOTE: if your system does not have bash you need
# to adjust the command according to your preferred shell,
# i.e. for freebsd use:
# login_cmd exec /bin/sh - ~/.xinitrc %session
login_cmd exec /bin/bash -login ~/.xinitrc %session
# Commands executed when starting and exiting a session.
# They can be used for registering a X11 session with
# sessreg. You can use the %user variable
sessionstart_cmd /usr/bin/sessreg -a -l $DISPLAY %user
sessionstop_cmd /usr/bin/sessreg -d -l $DISPLAY %user
# Start in daemon mode. Valid values: yes | no
# Note that this can be overriden by the command line
# options "-d" and "-nodaemon"
# daemon yes
# Available sessions (first one is the default).
# The current chosen session name is replaced in the login_cmd
# above, so your login command can handle different sessions.
# see the xinitrc.sample file shipped with slim sources
sessions xfce4,icewm,wmaker,blackbox
# Executed when pressing F11 (requires imagemagick)
screenshot_cmd import -window root /slim.png
# welcome message. Available variables: %host, %domain
welcome_msg Welcome to %host
# Session message. Prepended to the session name when pressing F1
# session_msg Session:
# shutdown / reboot messages
shutdown_msg The system is halting...
reboot_msg The system is rebooting...
# default user, leave blank or remove this line
# for avoid pre-loading the username.
default_user desktopuser
# Focus the password field on start when default_user is set
# Set to "yes" to enable this feature
focus_password yes
# Automatically login the default user (without entering
# the password. Set to "yes" to enable this feature
auto_login yes
# current theme, use comma separated list to specify a set to
# randomly choose from
current_theme default
# Lock file
lockfile /var/lock/slim.lock
# Log file
logfile /var/log/slim.log
slim.log isolated reboot
/usr/bin/xauth: creating new authority file /var/run/slim.auth
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.5.902 (1.7.6 RC 2)
Release Date: 2010-03-12
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.33-ARCH i686
Current Operating System: Linux ArchDaemon 2.6.32-ARCH #1 SMP PREEMPT Mon Mar 15 20:08:25 UTC 2010 i686
Kernel command line: root=/dev/disk/by-uuid/49d062ba-9f7b-4d18-98f2-87249f723889 ro 5 acpi_enforce_resources=lax vga=771
Build Date: 13 March 2010 07:33:22PM
Current version of pixman: 0.16.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 19 14:07:00 2010
(==) Using config file: "/etc/X11/xorg.conf"
/usr/bin/xauth: creating new authority file /home/desktopuser/.Xauthority
/usr/bin/startxfce4: X server already running on display :0.0
/tmp/xrdb_dysqQd:1: error: Unknown #directive "Those"
# Those are fallback settings, use the ui plugin to change it
/tmp/xrdb_dysqQd:2: error: Unknown #directive "or"
# or add your overrides to ~/.Xresources
/tmp/xrdb_dysqQd:3: error: Unknown #directive "Xft"
# Xft.hintstyle: hintnone/hintslight/hintmedium/hintfull
/tmp/xrdb_dysqQd:4: error: Unknown #directive "Xft"
# Xft hinting: 1/0
4 errors in preprocessor.
xrdb: "Xft.hinting" on line 9 overrides entry on line 6
xrdb: "Xft.hintstyle" on line 11 overrides entry on line 7
/tmp/xrdb_dysqQd:1: error: Unknown #directive "Those"
# Those are fallback settings, use the ui plugin to change it
/tmp/xrdb_dysqQd:2: error: Unknown #directive "or"
# or add your overrides to ~/.Xresources
/tmp/xrdb_dysqQd:3: error: Unknown #directive "Xft"
# Xft.hintstyle: hintnone/hintslight/hintmedium/hintfull
/tmp/xrdb_dysqQd:4: error: Unknown #directive "Xft"
# Xft hinting: 1/0
4 errors in preprocessor.
xrdb: "Xft.hinting" on line 9 overrides entry on line 6
xrdb: "Xft.hintstyle" on line 11 overrides entry on line 7
Agent pid 1617
xfdesktop[1637]: starting up
(xfce4-settings-helper:1639): GLib-GObject-CRITICAL **: g_param_spec_flags: assertion `G_TYPE_IS_FLAGS (flags_type)' failed
(xfce4-settings-helper:1639): GLib-GObject-CRITICAL **: g_object_class_install_property: assertion `G_IS_PARAM_SPEC (pspec)' failed
slim.log isolated logout
slim: waiting for X server to shut down..........
slim: X server slow to shut down, sending KILL signal.
slim: waiting for server to die
/usr/bin/xauth: creating new authority file /var/run/slim.auth
slim: waiting for X server to begin accepting connections
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.5.902 (1.7.6 RC 2)
Release Date: 2010-03-12
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.33-ARCH i686
Current Operating System: Linux ArchDaemon 2.6.32-ARCH #1 SMP PREEMPT Mon Mar 15 20:08:25 UTC 2010 i686
Kernel command line: root=/dev/disk/by-uuid/49d062ba-9f7b-4d18-98f2-87249f723889 ro 5 acpi_enforce_resources=lax vga=771
Build Date: 13 March 2010 07:33:22PM
Current version of pixman: 0.16.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 19 14:01:03 2010
(==) Using config file: "/etc/X11/xorg.conf"
Xorg.0.log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.5.902 (1.7.6 RC 2)
Release Date: 2010-03-12
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.33-ARCH i686
Current Operating System: Linux ArchDaemon 2.6.32-ARCH #1 SMP PREEMPT Mon Mar 15 20:08:25 UTC 2010 i686
Kernel command line: root=/dev/disk/by-uuid/49d062ba-9f7b-4d18-98f2-87249f723889 ro 5 acpi_enforce_resources=lax vga=771
Build Date: 13 March 2010 07:33:22PM
Current version of pixman: 0.16.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 19 18:39:41 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Videocard0"
(**) |-->Screen "Screen1" (1)
(**) | |-->Monitor "Monitor1"
(**) | |-->Device "Videocard1"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "BlankTime" "0"
(**) Option "StandbyTime" "0"
(**) Option "SuspendTime" "0"
(**) Option "OffTime" "0"
(**) Option "Xinerama" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x81e4c40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:1:0:0) 10de:0331:0000:0000 nVidia Corporation NV35 [GeForce FX 5900] rev 161, Mem @ 0xfd000000/16777216, 0xe0000000/134217728, BIOS @ 0x????????/131072
(--) PCI: (0:2:10:0) 4444:0016:0070:b7f3 Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder rev 1, Mem @ 0xf0000000/67108864
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 173.14.25 Wed Jan 27 02:59:37 PST 2010
(II) Loading extension GLX
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 173.14.25 Wed Jan 27 02:34:38 PST 2010
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "CRT: nvidia-auto-select +0+0"
(**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "CRT-0"
(**) NVIDIA(0): Option "DPI" "95 x 96"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce FX 5900 (NV35) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 131072 kBytes
(--) NVIDIA(0): VideoBIOS: 04.35.20.18.04
(II) NVIDIA(0): Detected AGP rate: 8X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce FX 5900 at PCI:1:0:0:
(--) NVIDIA(0): CMO CMC 17" AD (CRT-0)
(--) NVIDIA(0): NVIDIA TV Encoder (TV-0)
(--) NVIDIA(0): CMO CMC 17" AD (CRT-0): 400.0 MHz maximum pixel clock
(--) NVIDIA(0): NVIDIA TV Encoder (TV-0): 400.0 MHz maximum pixel clock
(--) NVIDIA(0): TV encoder: NVIDIA
(II) NVIDIA(0): Display Device found referenced in MetaMode: CRT-0
(II) NVIDIA(0): Assigned Display Device: CRT-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "CRT:nvidia-auto-select+0+0"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(**) NVIDIA(0): DPI set to (95, 96); computed from "DPI" X config option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(**) NVIDIA(1): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(1): RGB weight 888
(==) NVIDIA(1): Default visual is TrueColor
(==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(1): Option "TwinView" "0"
(**) NVIDIA(1): Option "MetaModes" "TV: nvidia-auto-select +0+0"
(**) NVIDIA(1): Enabling RENDER acceleration
(II) NVIDIA(1): NVIDIA GPU GeForce FX 5900 (NV35) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(1): Memory: 131072 kBytes
(--) NVIDIA(1): VideoBIOS: 04.35.20.18.04
(II) NVIDIA(1): Detected AGP rate: 8X
(--) NVIDIA(1): Interlaced video modes are supported on this GPU
(--) NVIDIA(1): Connected display device(s) on GeForce FX 5900 at PCI:1:0:0:
(--) NVIDIA(1): CMO CMC 17" AD (CRT-0)
(--) NVIDIA(1): NVIDIA TV Encoder (TV-0)
(--) NVIDIA(1): CMO CMC 17" AD (CRT-0): 400.0 MHz maximum pixel clock
(--) NVIDIA(1): NVIDIA TV Encoder (TV-0): 400.0 MHz maximum pixel clock
(--) NVIDIA(1): TV encoder: NVIDIA
(II) NVIDIA(1): Display Device found referenced in MetaMode: TV-0
(II) NVIDIA(1): Assigned Display Device: TV-0
(II) NVIDIA(1): Validated modes:
(II) NVIDIA(1): "TV:nvidia-auto-select+0+0"
(II) NVIDIA(1): Virtual screen size determined to be 1024 x 768
(==) NVIDIA(1): DPI set to (75, 75); computed from built-in default
(==) NVIDIA(1): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Unable to connect to the ACPI daemon; the ACPI daemon may not
(II) NVIDIA(0): be running or the "AcpidSocketPath" X configuration option
(II) NVIDIA(0): may not be set correctly. When the ACPI daemon is
(II) NVIDIA(0): available, the NVIDIA X driver can use it to receive ACPI
(II) NVIDIA(0): events. For details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): Setting mode "CRT:nvidia-auto-select+0+0"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(==) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) NVIDIA(1): Initialized AGP GART.
(II) NVIDIA(1): Unable to connect to the ACPI daemon; the ACPI daemon may not
(II) NVIDIA(1): be running or the "AcpidSocketPath" X configuration option
(II) NVIDIA(1): may not be set correctly. When the ACPI daemon is
(II) NVIDIA(1): available, the NVIDIA X driver can use it to receive ACPI
(II) NVIDIA(1): events. For details, please see the "ConnectToAcpid" and
(II) NVIDIA(1): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(1): Config Options in the README.
(II) NVIDIA(1): Setting mode "TV:nvidia-auto-select+0+0"
(II) NVIDIA(1): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(1): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(1): Backing store disabled
(==) NVIDIA(1): Silken mouse enabled
(==) NVIDIA(1): DPMS enabled
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Microsoft Microsoft Wireless Optical Desktop® 1.00
(**) Microsoft Microsoft Wireless Optical Desktop® 1.00: always reports core events
(**) Microsoft Microsoft Wireless Optical Desktop® 1.00: Device: "/dev/input/event6"
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Found 9 mouse buttons
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Found scroll wheel(s)
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Found relative axes
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Found x and y relative axes
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Found keys
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Configuring as mouse
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Configuring as keyboard
(**) Microsoft Microsoft Wireless Optical Desktop® 1.00: YAxisMapping: buttons 4 and 5
(**) Microsoft Microsoft Wireless Optical Desktop® 1.00: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Microsoft Microsoft Wireless Optical Desktop® 1.00" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Microsoft Microsoft Wireless Optical Desktop® 1.00: (accel) keeping acceleration scheme 1
(**) Microsoft Microsoft Wireless Optical Desktop® 1.00: (accel) acceleration profile 0
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: initialized for relative axes.
(II) config/hal: Adding input device Microsoft Microsoft Wireless Optical Desktop® 1.00
(**) Microsoft Microsoft Wireless Optical Desktop® 1.00: always reports core events
(**) Microsoft Microsoft Wireless Optical Desktop® 1.00: Device: "/dev/input/event5"
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Found keys
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Configuring as keyboard
(II) XINPUT: Adding extended input device "Microsoft Microsoft Wireless Optical Desktop® 1.00" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
errors from errors.log, this stuff just repeats
Mar 19 15:44:43 ArchDaemon kernel: ACPI: I/O resource smsc47m1 [0x680-0x6ff] conflicts with ACPI region IOPM [0x680-0x6ff]
Mar 19 18:39:21 ArchDaemon kernel: ivtv0: Unable to open firmware v4l-cx2341x-enc.fw (must be 376836 bytes)
Mar 19 18:39:21 ArchDaemon kernel: ivtv0: Did you put the firmware in the hotplug firmware directory?
Mar 19 18:39:21 ArchDaemon kernel: ivtv0: Unable to open firmware v4l-cx2341x-enc.fw (must be 376836 bytes)
Mar 19 18:39:21 ArchDaemon kernel: ivtv0: Did you put the firmware in the hotplug firmware directory?
Mar 19 18:39:21 ArchDaemon kernel: ivtv0: Failed to initialize on minor 3
Mar 19 18:39:21 ArchDaemon kernel: ivtv0: Failed to initialize on minor 0
Mar 19 18:39:21 ArchDaemon kernel: ivtv0: Failed to initialize on minor 1
Mar 19 18:39:21 ArchDaemon kernel: ivtv0: Failed to initialize on minor 2
Mar 19 18:39:22 ArchDaemon kernel: ivtv0: Failed to initialize on minor 2
Mar 19 18:39:22 ArchDaemon kernel: ivtv0: Failed to initialize on minor 0
Mar 19 18:39:22 ArchDaemon kernel: ivtv0: Failed to initialize on minor 3
Mar 19 18:39:22 ArchDaemon kernel: ivtv0: Failed to initialize on minor 1
Mar 19 18:39:22 ArchDaemon kernel: sd 4:0:0:0: [sdb] Assuming drive cache: write through
Mar 19 18:39:22 ArchDaemon kernel: sd 4:0:0:0: [sdb] Assuming drive cache: write through
Mar 19 18:39:30 ArchDaemon kernel: sd 4:0:0:0: [sdb] Assuming drive cache: write through
errors common in auth.log
Mar 19 13:10:25 ArchDaemon sudo: desktopuser : pam_authenticate: Conversation error ; TTY=unknown ; PWD=/home/desktopuser ; USER=root ; COMMAND=/usr/lib/xfce4/xfsm-shutdown-helper
Mar 19 13:10:30 ArchDaemon dbus-daemon: Rejected send message, 1 matched rules; type="method_call", sender=":1.10" (uid=1001 pid=1567 comm="exo-mount) interface="org.freedesktop.Hal.Device.Volume" member="Mount" error name="(unset)" requested_reply=0 destination="org.freedesktop.Hal" (uid=0 pid=1336 comm="/usr/sbin/hald))

Similar Messages

I use IncrediMail and it keeps crashing and giving me a Runtime Error what can I do about this?

The message is as follows:
X Runtime Error!
Program:c\Program Files (x86\Incred.Mail\Bin\ImApp.exe
This application has requested the Runtime to terminte it in an unusual way.
Please contact the application's support team for more information.

Hi gergesmich,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Regards,
- Brenden

[solved]Slim and new consolekit

Hey all. Just wondering if the the newest version of Slim that came out on January 31st, Slim 1.3.2.-3, works completely fine now with the newest version of consolekit?
EDIT:
Just installed slim again and everything seems to be fixed. Working with consolekit again!
Last edited by orlfman (2011-02-03 05:02:17)

Using Slim and LXDE. Suspend and hibernate from lxde-logout didn't work and an unpriviledged account I created coudn't access mixer device or mount removable drives without being added to the 'audio' and 'storage' groups after the initial upgrade to new consolekit. But after the very latest upgrades of packages 'slim' and 'consolekit' everything is AFAIK back to working just as before. Unless I stumble over something new I'd say stuff are just OK as of today.
(Remember to merge any /etc/pam.d/login.pacnew to /etc/pam.d/login. Threads suggests that those that forgot got real problems.)

Importing bookmark backup causes crash on exit with clean install

I am getting a crash on exit with Firefox 3.6.3. I disabled all addons, removed all themes, even re-installed Firefox. Everything works fine until I import my saved bookmarks backup - and then the crash on exit comes right back.

Are you importing from an HTML file, JSON file, or copying over the places.sqlite file?

Three of my apps on my ipad keep crashing i just went to bed nd the next morning i went to use one them and it kept crashing i restarted my ipad i deleted and redownloaded the apps i updated my ipad and those three apps are still crashing

three of my apps on my ipad keep crashing i just went to bed nd the next morning i went to use one them and it kept crashing i restarted my ipad i deleted and redownloaded the apps i updated my ipad and those three apps are still crashin. i think its something wrong with my ipad but idk what

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
iOS 7: Help with how to fix a crashing app on iPhone, iPad (Mini), and iPod Touch
http://teachmeios.com/help-with-how-to-fix-a-crashing-app-on-iphone-ipad-mini-an d-ipod-touch/
Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Delete the app and redownload.
Downloading Past Purchases from the iTunes Store, App Store and iBooks Store
http://support.apple.com/kb/ht2519
 Cheers, Tom

Updated to Firefox4 and now it crashes every time I use a search engine... goggle, yahoo, bing, take your pick.

I updated to Firefox4 and at first everything seemed to run just fine, but then I tried to search for something, using Google... it crashed.I tried again, then with several other search engines... it crashed every time and took everything else with it.
I tried it with both the search bar and by manually typing in the add for the search engine. If I call up the site nothing bad happens, but it still crashes as soon as I start a search. Tried it with Explorer and Safari and everything worked ok, it's just Firefox having these problems.

Hi talaimosr,
I understand that you have changed your default search engine because of the constant crashes. Please make sure that you do not have more than one version of Flash installed on the about:addons page.
Please also be sure to run run in Safe Mode to make sure its not an add on causing the crashing. [[Troubleshoot Firefox issues using Safe Mode]]
In order to further investigate the reason for crashes please post the last few crash reports that were submitted.In order to assist you better, please follow the steps below to provide us crash IDs to help us learn more about your crash.
#Enter ''about:crashes'' in the Firefox address bar and press Enter. A Submitted Crash Reports list will appear, similar to the one shown below.
#Copy the '''5''' most recent Report IDs that start with '''bp-''' and then go back to your forum question and paste that into the "Post a Reply" box. (Please don't take a screenshot of your crashes, just copy and paste the ID's. The below image is just an example of what your Firefox screen should look like)
[[Image:aboutcrashesFx29|width=520]]
<br><br>
Thank you for your help!
More information and further troubleshooting steps can be found in the [[Firefox crashes - Troubleshoot, prevent and get help fixing crashes]] article.

I just got iphone 5c and i am not happy with it. It uses to much data and i don't even know how. I can't get the ringtones i want for my contacts.I got it on my free upgrade but i want to take it back and get something else but where i got it they say i c

I just got iphone 5c and i am not happy with it. It uses to much data and i don't even know how. I can't get the ringtones i want for my contacts.I got it on my free upgrade but i want to take it back and get something else but where i got it they say i can't because i don't have the earbuds and i have serches or them. now i am suck with a phone i don't like at all until my next upgrade. this is very dishearten

1. If you are this unhappy with that phone, and the lost earbuds is the only thing stopping you from taking it back, why do not just buy some earbuds. That way you can get rid of that phone. It all depend upon how much you want to get rid of that phone.
2. Yet if you are stuck with that iPhone, here is something might help you to control the data usage. By design, iPhones do turn off WiFi when they go dormant. So if a download is in progress and so forth when the phone goes dormant, it will switch to use cellular data, if this setting is left on. Therefore, from multi-sources I have learned that if you keep your iPhone connected to a power source, then it will stay connected to the available WiFi.

HT5922 Can I airplay a movie from safari on my MacBook to Apple TV and still use the computer for something else at the same time?

Can I airplay a movie from safari on my MacBook to Apple TV and still use the computer for something else at the same time?

Hi frogjt,
Welcome to the Apple Support Communities!
Great question! You can absolutely do this in OS X 10.9. The attached article explains how the process of using AirPlay with Apple TV to create a second display. Also, towards the bottom of the article there are instructions on how to set your Displays preferences on the computer to make sure the TV and MacBook Pro displays are set up the way you want them to be.
OS X: Using multiple displays in Mavericks
http://support.apple.com/kb/HT5891
Have a great day,
Joe

JVM Crash When Using JNI and COM

I'm trying to call a DLL compiled from VB6 source code that I do not have access to. The VB6 code simply retrieves data from a DB2 database using ADO and my client code grabs that data and marshals it to my Java code. I'm attempting to achieve this using JNI and COM (without a third-party bridge). It works 75% of the time, but the other 25% of the time, the JVM crashes with the usual Hotspot crash log containing an access violation exception. However, I don't know what in my C++ code (VC++ 8) could be causing this except for passing a "wild" pointer to the code lying underneath the COM object interface. If that is the case, I don't know how I am doing that.
The Java code that is calling my native method is running on Tomcat 5.5.25 and just to be safe, I am not allowing multiple threads to concurrently call the method in my JNI DLL (though I realize that this will kill performance). Once I can get past this problem, I'll do the COM interfacing on a worker thread in my native code so I don't screw up CoInitialize and CoUninitialize calls in the case the same thread is concurrently executing multiple calls to my native code.
I've noticed that in most cases, the JVM crashes during my call to the pClsAccount->OpenConnection method. However, my DLL isn't what is listed on the top of the call stack, which is why I suspect the passing of a wild pointer, though I'm just taking a guess at that. Does anyone have an idea as to what's going on ?
JNIEXPORT jobject JNICALL Java_CustomerInfo_nGetCustomerAccountInfo(JNIEnv *env, jobject customerInfo, jstring accountNumber, jstring iniFileName)
jboolean isCopy;
// Account info class and instance to be instantiated
jclass accountInfoCls = NULL;
jobject accountInfoObj = NULL;
// The constructor ID of the accountInfoCls
jmethodID ctorID = NULL;
// Pointer to the interface for the ClsAccount COM object
_clsAccount *pClsAccount = NULL;
HRESULT hr;
BSTR bstrIniFileName(L"");
try
const char *nativeAccountNumber = NULL;
if (accountNumber != NULL)
nativeAccountNumber = env->GetStringUTFChars(accountNumber, &isCopy);
else
jclass newExcCls;
env->ExceptionDescribe();
env->ExceptionClear();
newExcCls = env->FindClass("java/lang/IllegalArgumentException");
env->ThrowNew(newExcCls, "accountNumber passed in was null !");
return NULL;
// Initialization
variantt varConnectionSucceeded = variantt(false);
variantt varGetAccountInfoSucceeded = variantt(false);
variantt varAccountNumber = variantt(nativeAccountNumber);
bstrt bstrLastPaymentDate = bstrt();
bstrt bstrLastErrorMessage = bstrt();
bstrt bstrLastErrorNumber = bstrt();
jlong jTotalDue = NULL;
jlong jEstablishedDueDay = NULL;
jlong jLastPaymentAmount = NULL;
jstring jLastPaymentDate = NULL;
jstring jLastErrorMessage = NULL;
jstring jLastErrorNumber = NULL;
jthrowable jException = NULL;
const char *chLastPaymentDate = NULL;
const char *chLastErrorMessage = NULL;
const char *chLastErrorNumber = NULL;
long long totalDue;
long long lastPaymentAmount;
long establishedDueDateDay;
//Convert string from Java string to C string to VB string
const char *nativeIniFileName = NULL;
if (iniFileName != NULL)
nativeIniFileName = env->GetStringUTFChars(iniFileName, &isCopy);
else
jclass newExcCls;
env->ExceptionDescribe();
env->ExceptionClear();
newExcCls = env->FindClass("java/lang/IllegalArgumentException");
env->ThrowNew(newExcCls, "iniFileName passed in was null");
return NULL;
bstrIniFileName = comutil::ConvertStringToBSTR(nativeIniFileName);
CoInitialize(NULL);
// Create an instance of the COClass with the interface over it
hr = CoCreateInstance(__uuidof(clsAccount), NULL, CLSCTX_INPROC_SERVER, __uuidof(_clsAccount), (void **)&pClsAccount);
if (hr == S_OK)
varConnectionSucceeded.boolVal = pClsAccount->OpenConnection(&bstrIniFileName);
　
if (varConnectionSucceeded.boolVal == -1)
varGetAccountInfoSucceeded.boolVal = pClsAccount->GetAccountPaymentInformation(&(varAccountNumber.GetVARIANT()));
env->ReleaseStringUTFChars(accountNumber, nativeAccountNumber);
// Extract all available account information from the ClsAccount object
if (varGetAccountInfoSucceeded.boolVal == -1)
totalDue = pClsAccount->TotalDue.int64;
establishedDueDateDay = pClsAccount->EstablishedDueDateDay;
lastPaymentAmount = pClsAccount->LastPaymentAmount.int64;
bstrLastPaymentDate = pClsAccount->LastPaymentDate;
chLastPaymentDate = comutil::ConvertBSTRToString(bstrLastPaymentDate.GetBSTR());
jTotalDue = (jlong)totalDue;
jEstablishedDueDay = (jlong)establishedDueDateDay;
jLastPaymentAmount = (jlong)lastPaymentAmount;
jLastPaymentDate = env->NewStringUTF(chLastPaymentDate);
delete[] chLastPaymentDate;
pClsAccount->CloseConnection();
// Populate error fields if any errors occur
bstrLastErrorMessage = pClsAccount->LastErrMessage;
chLastErrorMessage = comutil::ConvertBSTRToString(bstrLastErrorMessage.GetBSTR());
bstrLastErrorNumber = pClsAccount->LastErrNumber;
chLastErrorNumber = comutil::ConvertBSTRToString(bstrLastErrorNumber.GetBSTR());
jLastErrorMessage = env->NewStringUTF(chLastErrorMessage);
jLastErrorNumber = env->NewStringUTF(chLastErrorNumber);
delete[] chLastErrorMessage;
delete[] chLastErrorNumber;
const char* clsName = "com/nuance/merchantsmutual/businessentities/CustomerAccountInfo";
// Find the Java class and the ID of its constructor
accountInfoCls = env->FindClass(clsName);
ctorID = env->GetMethodID(accountInfoCls, "<init>", "(JJJLjava/lang/String;Ljava/lang/String;Ljava/lang/String;)V");
jException = env->ExceptionOccurred();
if (jException != NULL)
env->ExceptionDescribe();
env->ExceptionClear();
//Release all resources associated with the ClsAccount instance
pClsAccount->Release();
//Instantiate the class with the given parameters
accountInfoObj = env->NewObject(accountInfoCls, ctorID, jTotalDue, jEstablishedDueDay, jLastPaymentAmount, jLastPaymentDate, jLastErrorMessage, jLastErrorNumber);
jException = env->ExceptionOccurred();
if (jException != NULL)
env->ExceptionDescribe();
env->ExceptionClear();
else if (hr == REGDB_E_CLASSNOTREG)
cout << "COM class not registered" << endl;
else if ( hr == CLASS_E_NOAGGREGATION)
cout << "COM class can't be aggregated" << endl;
else if (hr == E_NOINTERFACE)
cout << "No interface for COM class clsAccount" << endl;
else if (hr == E_POINTER)
cout << "*ppv pointer was NULL !" << endl;
else
cout << "Error occurred while creating COM object. HR is [" << hr << "]" << endl;
// Free the BSTR because a new one was returned with a call to comutil::ConvertStringToBSTR
SysFreeString(bstrIniFileName);
// Release the string when it's no longer needed. MUST call if string won't be used
// anymore or else a memory leak will occur
env->ReleaseStringUTFChars(iniFileName, nativeIniFileName);
CoUninitialize();
　
catch (_com_error &e)
cout << "Encountered an exception in GetCustomerAccountInfo: Error was " << e.ErrorMessage();
pClsAccount->Release();
catch (...)
pClsAccount->Release();
return accountInfoObj;
Edited by: Cthulhu76 on Jan 5, 2010 9:18 AM

0x49202400 JavaThread "ContainerBackgroundProcessor[StandardEngine[Catalina]]" daemon [_thread_blocked, id=5340, stack(0x49bf0000,0x49c40000)]
0x48a7e800 JavaThread "Thread-1" [_thread_in_native, id=5976, stack(0x48f00000,0x48f50000)]
0x48a0dc00 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=3072, stack(0x48c60000,0x48cb0000)]
0x48a09000 JavaThread "CompilerThread0" daemon [_thread_blocked, id=4988, stack(0x48c10000,0x48c60000)]
0x48a07c00 JavaThread "Attach Listener" daemon [_thread_blocked, id=3124, stack(0x48bc0000,0x48c10000)]
0x48a07000 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=2572, stack(0x48b70000,0x48bc0000)]
0x489f5c00 JavaThread "Finalizer" daemon [_thread_blocked, id=5752, stack(0x48b20000,0x48b70000)]
0x489f4c00 JavaThread "Reference Handler" daemon [_thread_blocked, id=2596, stack(0x48ad0000,0x48b20000)]
0x003c6000 JavaThread "main" [_thread_in_native, id=4252, stack(0x00820000,0x00870000)]
Other Threads:
0x489f0400 VMThread [stack: 0x48a80000,0x48ad0000] [id=5624]
0x48a18800 WatcherThread [stack: 0x48cb0000,0x48d00000] [id=1192]
VM state:not at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: None
Heap
def new generation total 36288K, used 12762K [0x02940000, 0x050a0000, 0x07800000)
eden space 32256K, 34% used [0x02940000, 0x0343af58, 0x048c0000)
from space 4032K, 37% used [0x04cb0000, 0x04e2ba28, 0x050a0000)
to space 4032K, 0% used [0x048c0000, 0x048c0000, 0x04cb0000)
tenured generation total 483968K, used 7518K [0x07800000, 0x250a0000, 0x42940000)
the space 483968K, 1% used [0x07800000, 0x07f57958, 0x07f57a00, 0x250a0000)
compacting perm gen total 14080K, used 14016K [0x42940000, 0x43700000, 0x46940000)
the space 14080K, 99% used [0x42940000, 0x436f0320, 0x436f0400, 0x43700000)
No shared spaces configured.
Dynamic libraries:
0x00400000 - 0x0040f000      C:\Program Files\Apache Software Foundation\Tomcat 5.5\bin\tomcat5.exe
0x7c800000 - 0x7c8c0000      C:\WINDOWS\system32\ntdll.dll
0x77e40000 - 0x77f42000      C:\WINDOWS\system32\kernel32.dll
0x77380000 - 0x77411000      C:\WINDOWS\system32\USER32.dll
0x77c00000 - 0x77c48000      C:\WINDOWS\system32\GDI32.dll
0x77f50000 - 0x77feb000      C:\WINDOWS\system32\ADVAPI32.dll
0x77c50000 - 0x77cef000      C:\WINDOWS\system32\RPCRT4.dll
0x76f50000 - 0x76f63000      C:\WINDOWS\system32\Secur32.dll
0x77ba0000 - 0x77bfa000      C:\WINDOWS\system32\MSVCRT.dll
0x7c8d0000 - 0x7d0cf000      C:\WINDOWS\system32\SHELL32.dll
0x77da0000 - 0x77df2000      C:\WINDOWS\system32\SHLWAPI.dll
0x76290000 - 0x762ad000      C:\WINDOWS\system32\IMM32.DLL
0x77420000 - 0x77523000      C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.3790.3959_x-ww_D8713E55\comctl32.dll
0x6d7c0000 - 0x6da10000      C:\Program Files\Java\jre1.6.0_07\bin\client\jvm.dll
0x76aa0000 - 0x76acd000      C:\WINDOWS\system32\WINMM.dll
0x7c340000 - 0x7c396000      C:\WINDOWS\system32\MSVCR71.dll
0x6d270000 - 0x6d278000      C:\Program Files\Java\jre1.6.0_07\bin\hpi.dll
0x76b70000 - 0x76b7b000      C:\WINDOWS\system32\PSAPI.DLL
0x6d770000 - 0x6d77c000      C:\Program Files\Java\jre1.6.0_07\bin\verify.dll
0x6d310000 - 0x6d32f000      C:\Program Files\Java\jre1.6.0_07\bin\java.dll
0x6d7b0000 - 0x6d7bf000      C:\Program Files\Java\jre1.6.0_07\bin\zip.dll
0x6d570000 - 0x6d583000      C:\Program Files\Java\jre1.6.0_07\bin\net.dll
0x71c00000 - 0x71c17000      C:\WINDOWS\system32\WS2_32.dll
0x71bf0000 - 0x71bf8000      C:\WINDOWS\system32\WS2HELP.dll
0x71b20000 - 0x71b61000      C:\WINDOWS\system32\mswsock.dll
0x5f270000 - 0x5f2ca000      C:\WINDOWS\system32\hnetcfg.dll
0x71ae0000 - 0x71ae8000      C:\WINDOWS\System32\wshtcpip.dll
0x76ed0000 - 0x76efa000      C:\WINDOWS\system32\DNSAPI.dll
0x76f70000 - 0x76f77000      C:\WINDOWS\System32\winrnr.dll
0x76f10000 - 0x76f3e000      C:\WINDOWS\system32\WLDAP32.dll
0x76f80000 - 0x76f85000      C:\WINDOWS\system32\rasadhlp.dll
0x4a6a0000 - 0x4a6ac000      C:\Program Files\Apache Software Foundation\Tomcat 5.5\webapps\MMI\WEB-INF\lib\CustomerInfoProxy.dll
0x77670000 - 0x777a9000      C:\WINDOWS\system32\ole32.dll
0x77d00000 - 0x77d8b000      C:\WINDOWS\system32\OLEAUT32.dll
0x7c420000 - 0x7c4a7000      C:\WINDOWS\WinSxS\x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.4053_x-ww_E6967989\MSVCP80.dll
0x78130000 - 0x781cb000      C:\WINDOWS\WinSxS\x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.4053_x-ww_E6967989\MSVCR80.dll
0x777b0000 - 0x77833000      C:\WINDOWS\system32\CLBCatQ.DLL
0x77010000 - 0x770d6000      C:\WINDOWS\system32\COMRes.dll
0x77b90000 - 0x77b98000      C:\WINDOWS\system32\VERSION.dll
0x75da0000 - 0x75e5d000      C:\WINDOWS\system32\SXS.DLL
0x75e60000 - 0x75e87000      C:\WINDOWS\system32\apphelp.dll
0x4dc30000 - 0x4dc5e000      C:\WINDOWS\system32\msctfime.ime
0x4b0d0000 - 0x4b395000      C:\WINDOWS\system32\xpsp2res.dll
0x71bb0000 - 0x71bb9000      C:\WINDOWS\system32\WSOCK32.dll
0x4bbe0000 - 0x4bbea000      C:\Program Files\Apache Software Foundation\Tomcat 5.5\webapps\MMI\WEB-INF\lib\ClearTranProxy.dll
0x745e0000 - 0x7489e000      C:\WINDOWS\system32\msi.dll
0x71c40000 - 0x71c97000      C:\WINDOWS\system32\NETAPI32.dll
0x4bc50000 - 0x4bc6c000      C:\WINDOWS\system32\DBNETLIB.DLL
0x71f60000 - 0x71f64000      C:\WINDOWS\system32\security.dll
0x76c90000 - 0x76cb7000      C:\WINDOWS\system32\msv1_0.dll
0x76cf0000 - 0x76d0a000      C:\WINDOWS\system32\iphlpapi.dll
0x761b0000 - 0x76243000      C:\WINDOWS\system32\crypt32.dll
0x76190000 - 0x761a2000      C:\WINDOWS\system32\MSASN1.dll
0x4bcf0000 - 0x4bcff000      C:\Program Files\Common Files\System\Ole DB\SQLOLEDB.RLL
0x4a8a0000 - 0x4a8aa000      C:\Program Files\Apache Software Foundation\Tomcat 5.5\webapps\MMI\WEB-INF\lib\MIGI.DLL
0x73570000 - 0x736c2000      C:\Program Files\Apache Software Foundation\Tomcat 5.5\webapps\MMI\WEB-INF\lib\MSVBVM60.DLL
0x4a950000 - 0x4a9e2000      C:\Program Files\Common Files\System\ado\msado15.dll
0x74a50000 - 0x74a6a000      C:\WINDOWS\system32\MSDART.DLL
0x4c850000 - 0x4c8c9000      C:\Program Files\Common Files\System\Ole DB\oledb32.dll
0x4dbb0000 - 0x4dbc1000      C:\Program Files\Common Files\System\Ole DB\OLEDB32R.DLL
VM Arguments:
jvm_args: -Dcatalina.home=C:\Program Files\Apache Software Foundation\Tomcat 5.5 -Dcatalina.base=C:\Program Files\Apache Software Foundation\Tomcat 5.5 -Djava.endorsed.dirs=C:\Program Files\Apache Software Foundation\Tomcat 5.5\common\endorsed -Djava.io.tmpdir=C:\Program Files\Apache Software Foundation\Tomcat 5.5\temp -Djava.util.logging.manager=org.apache.juli.ClassLoaderLogManager -Djava.util.logging.config.file=C:\Program Files\Apache Software Foundation\Tomcat 5.5\conf\logging.properties -Djava.library.path=C:\Program Files\Apache Software Foundation\Tomcat 5.5\webapps\MMI\WEB-INF\lib vfprintf -Xms512m -Xmx1024m
java_command: <unknown>
Launcher Type: generic
Environment Variables:
JAVA_HOME=C:\Program Files\Java\jdk1.6.0_07
[error occurred during error reporting (printing environment variables), id 0xc0000005]
--------------- S Y S T E M ---------------
OS: Windows Server 2003 family Build 3790 Service Pack 2
CPU:total 4 (4 cores per cpu, 1 threads per core) family 6 model 7 stepping 6, cmov, cx8, fxsr, mmx, sse, sse2, sse3, ssse3
Memory: 4k page, physical 2097151k(2097151k free), swap 4194303k(4194303k free)
vm_info: Java HotSpot(TM) Client VM (10.0-b23) for windows-x86 JRE (1.6.0_07-b06), built on Jun 10 2008 01:14:11 by "java_re" with MS VC++ 7.1
time: Mon Dec 28 15:24:00 2009
elapsed time: 600 seconds

I have been using a free trial of photoshop cc and my computer crashed. Now it says up to date, but the program is not installed anymore. How can I re install it? I already uninstalled creative cloud and re installed it, but the same issue occurs.

I have been using a free trial of Photoshop cc and my computer crashed. Now it says up to date, but the program is not installed anymore. How can I re install it? I already uninstalled creative cloud and re installed it, but the same issue occurs.

Hi dmomoney24 ,
Kindly refer : CC desktop lists applications as "Up to Date" when not installed.
Please revert if the problem persists.
Thanks,
Atul Saini

I was using the newest version on OSX 10.7.5 and I was in full screen mode and viewing a photo and it was impossible to exit full screen. This happened at 11:03pm on Friday April 12, 2013. How to fix

I was using the newest version on OSX 10.7.5 and I was in full screen mode and viewing a photo and it was impossible to exit full screen. This happened at 11:03pm on Friday April 12, 2013. I deleted this from my apps and then deleted iphoto from my purchases in macbook app store the search it the app store and it says it has still been installed. What can I do to fix it?

Well deleting it from your machine was not the way to go.
Deleting it from your Purchases List was definitely not the way to go.
So, I'm not really sure how you're going to reinstall it.
But figure that out and we can try help. Contact App Store support. There's a link on the right hand side of the App Store Window. They should be able to get it back on your purchases list so you can reinstall it.

I bought the Adobe student version of Photoshop and Premiere Elements a few months ago - and now I am trying to use it, and the serial number that I have is incorrect - or it is only the registration number or something? It says I should have been sent an

I bought the Adobe student version of Photoshop and Premiere Elements a few months ago - and now I am trying to use it, and the serial number that I have is incorrect - or it is only the registration number or something? It says I should have been sent an email with the serial number once the product was registered - But I never received this email. If anyone is able to help me with this issue - that would be great. the registration number is: PEPEP6-5578-6450-8871-9107 I am using a windows based system

If I were you I would first make sure CS6 was deactivated or signed-out. Then download Adobe's cleaner and remove cc, CS6 and any other creative application installed including Creative Cloud desktop application. Then install CS6 and use your CS6 serial number during the install to activate CS6 standard or extended which ever the serial number is for. CS6 Version 13.0 should the be activated. That level of CS6 is extremely bug ridden so be sure to the use CS6 menu Help>Updates to get CS6 updates. Windows should update to version 13.0.1.3 Mac to version 13.0.6. Not Subscription CS6 version 13.1.2...
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

My iphone froze last nite and i was unable to exit the app i was on, it then switched the screen off as if it was not in use, now i am unable to open my iphone or switch it off, calls are still comin thro as phone is vibrating but im unable to answer

my iphone froze last nite and i was unable to exit the app i was on, it then switched the screen off as if it was not in use, now i am unable to open my iphone or switch it off, calls are still comin thro as phone is vibrating but im unable to answer as cant activate the screen?????
pls help

See Here for > Frozen or unresponsive iPhone
Try this First...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
http://support.apple.com/kb/ht1430
More Info here...
https://discussions.apple.com/message/19521062

I have a new 64bit computer to which I have transferred all my files and re-installed all my programsWhen I try to print a page using Adobe Acrobat 9, Firefox crashes. This has never happened before, and does not happen with other browsers.

I have a new computer. I transferred all my data files and installed my programs. Now, when I try to print a page ti pdf using Adobe Acrobat 9, Firefox crashes, and Adobe hangs up.

Thanks for your reply cor-el. I had never heard of nor seen the pref network.http.max-connections until I read about it in some of the replies in this support forum. People were saying 256 was the old setting and a new setting of 48 would correct my problem. When I followed the instructions to get to - see - and change the setting I discovered that my network.http.max-connections was already set to 48. I never did this. The only way I can think of that this setting was changed is that it happened by an automatic update to my Firefox browser. So, the problem I have was probably happening while this setting was at 48 all along. It is still set at 48 and I am still having the same problem. I will try as you suggest and set it to 30 and see what happens. I'll let you know the results. That's again for your response.

Crashing Constantly when using ripple and roll tools.

I have faced this issue in the past, but not as constantly as it is happening now. Every time I use the ripple or roll tool, or even if I try
to avoid using them and use my mouse to extend an edit - FCP crashes. I am hardly getting any work done, and obviously am so frustrated.
This has happened to me in the past, on different machines, with different versions of software, but never has it been every time I use
the tool to the point where I get nothing done.
Please help me! I just created a new project to see if this will work out any bugs.
Thanks as usual to whoever is out there!

Hi Michael,
This project was originally shot on Super 16mm, and I am doing the re-edit. (I didn't start with the project, so I didn't set up the specs, transfers, etc.). The end result will most likely be film at some point, or an HDCam - not sure yet. It's a feature.
Why are you saying that Apple ProRes HQ is overkill? I'm starting up a new feature in a couple of weeks and am just now figuring out specs for editing. We are using the RED camera and I have told the DP that our Codec could be Apple Pro Res HQ. Can you give me your reasons why this may not be a good idea?
Thanks!!

Using slim and xfce4, something crashes on exit

Similar Messages

Maybe you are looking for