Using Spry in Sharepoint

I'm currently setting up a Sharepoint site for our
organization. We are currently replacing our old Intranet with this
new Sharepoint site. On our old Intranet, I used some Spry for a
couple of things. I'm looking to bring the Spry over into
Sharepoint. I was wondering if it can be done and how I would go
about doing that.

Thats a very unique question. I am sure it can be done
however, its just a mater of how you develop or build out the
webpart you wish to have drive this. I think you might have to
build a HTML based webpart to perform the work, and then figure out
how you may want to use the content pages to feed the spry/HTML
based webpart the data.
What specifically are you looking at doing? Also is there a
webpart to do it already. WSS 3.0 has some great gains over the
past but I like the way you looking to customize it. I might just
have to try that myself later today.

Similar Messages

Using Groups in SharePoint from Active Directory

Hello,
Is it possible to use groups in SharePoint from AD?
I have several groups in AD that I would like to use in SP. Of course SP has its own set up groups in permission (Owner, Member and Visitor). I do not want to use these groups. What I would like to do is use groups that are in my AD and assign those the
designer, contributor, read-only..etc permission.
For example, SP people picker finds my AD group called "Finance_Project" and assign this group with permission rights as a contributor.
Is this doable in SharePoint. I would think since SharePoint can be authenticated with AD, you should be able to use your own AD groups.
Any suggestions, articles and answers are greatly appreciated.
artisticweb

You can do this in SharePoint. are you importing the AD groups via UPA?
Creating a SharePoint group and adding an Active Directory group to its members…this allows anyone in the Active Directory group to participate in the SharePoint group
Mapping roles directly to Active Directory groups and not using SharePoint groups at all.
here is couple of article which will explain your choices one over to other
Assign permission levels in SharePoint 2013
Using Active Directory Vs. SharePoint Groups
http://sergeluca.wordpress.com/2013/07/06/sharepoint-2013-use-ag-groups-yes-butdont-forget-the-security-token-caching-logontokencacheexpirationwindow-and-windowstokenlifetime/
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Not able to set security group without mail enabled as site collection admin using powershell in sharepoint online site - office 365

not able to set security group without mail enabled as site collection admin using powershell in sharepoint online site - office 365?
Any idea?

after few days test in my lab, I can see that only email enabled group can be added as site collection admin using POWERSHELL.
hope this helps who stuck like me!! :-)

I am not able to use Firefox with Sharepoint - I can only open a file in read-only mode and cannot checkout the document and edit.

I would like to use Firefox with Sharepoint.
However, I am only able to open a file in "read only" mode whch means I cannot edit the document and save it. I am also not able to "check-out" a document in Sharepoint and edit it at the same time.

This may not work for everyone, but I solved this problem by clicking on the file name in sharepoint, not the document icon to the left of the name. This then brought up the various options, including checking out, editing, version history etc. It seems obvious but I have only just realised this!

Use Spry to insert data into a database?

I'm new to Spry, so I have a question:
Can I use Spry to insert data into a MySQL database without
reloading the site?
Reading data from XML file works fine, but I don't know if
writing is possible..

I don't get it... I tried this:
<script type="text/javascript" src="spry/xpath.js"
/></script>
<script type="text/javascript" src="spry/SpryData.js"
/></script>
<script type="text/javascript">
/* <![CDATA[ */
function subscribe() {
var subscribe;
var info =
document.getElementById("subscription_info").value;
if (document.getElementsByName("subscription")[0].checked ==
true) {
subscribe = "ja";
else {
subscribe = "nein";
var dsSubscribe = new
Spry.Data.XMLDataSet("include/inc_subscribe.php?subscribe="+subscribe+"&info="+info+"&sit e=<?=$_GET['site'];?>",
"subscription/ok");
/* ]]> */
</script>
<div id="infos">
<input type="radio" name="subscription" value="ja" />
dabei
<input type="radio" name="subscription" value="nein"
/> nicht dabei
<input type='text' class='text'
id='subscription_info_text' />
<input type='submit' id="subscription_submit"
value='Eintragen' onClick="subscribe()" />
</div>
But the data isn't inserted into the mysql database. When I
start the php script directly, it works, so I think it's not a php
problem.

Issue using spry regions in spry tabbed content

I am having a slight issue with making a slideshow in a spry tabbed panel set. I have tested my XML used for the slideshow in a basic blank page, where I created the spry source and detail regions, and it loads fine. When you click on the thumbnail, the detail region loads the image. But when I place the slideshow in my websites page, it is inside a spry tabbed panel set. Where it just doesn't seem to want to work.
Has anyone had this issue?
I posted a copy of the page at the link below. The slideshow is under the portfolio tab
http://www.fscproductions.net/spry/
Thanks
JF

Hi,
On the main forum page you will have read the following.
Announcement: New to Spry, or the Spry forums?
Hide Details
Before you post a topic please verify that:
You are using the latest Spry files
The latest version of the Adobe Spry Framework is 1.6.1, this is the same version that ships with Dreamweaver CS4. If you use Dreamweaver CS3 (uses Spry 1.4), its wise to upgrade your files to the latest version. This can easily be done using the Spry Updater that can be found here.
After you have upgraded and not removed the remarks from the Spry files, we will have another look at it.
Ben

I have created a form in DW 5.0 using spry text fields. I am wondering what I did wrong to make the

I have created a form in DW 5.0 using spry text fields. I am wondering what I did wrong to make the form fields show text?
Thank you.

Thanks again. There's one other thing I wanted to achieve here. I need the date format to be displayed like "dd/mm/yyyy" and not like it's doing by default at the moment (i.e. mm/dd/yyyy)
I don't have any knowledge of jQuery but had a go anyway at trying to fix this using this link http://api.jqueryui.com/datepicker/ as aid to try adjust my code. Obviously I couldn't get it to work so far... So I'm looking for a little bit of help from anyone who knows a bit of jQuery.
Here's the original default code (just the stuff that goes in the 'head' of the page):
<script>
$(function() {
      $( "#datepicker" ).datepicker();
</script>
And here's what I tried adding to make it work:
<script>
$(function() {
      $( "#datepicker" ).datepicker();
      $.datepicker.formatDate( "dd/mm/yyyy" );
</script>
Obviously I tried other combinations including .parseDate instead of .formatDate etc etc none of which worked.
I'm wondering whether the extra code should perhaps go inside where the XXs are - $( "#datepicker" ).datepicker(XX)
Anyway, if somebody could help me out that would be great. Cheers!

Creating SharePoint Custom List using a list using a Microsoft.SharePoint.Client.ClientContext object: Lists.Add method from existing Template does not Include Template Content (include content was checked for template)

The code below works assuming you have a list template setup called "GenTasksTemplate".
The problem is that even though the check box to include content was checked during the creation of the template, the task items in the new list do not get populated. What am I missing?
using System;
using System.Linq;
using Microsoft.SharePoint.Client;
protected void createSPlist(object sender, EventArgs e)
ClientContext context = new ClientContext("https://sharepointServer/sites/devcollection/");
var web = context.Web;
ListTemplateCollection ltc = context.Site.GetCustomListTemplates(context.Web);
ListCollection siteListsColection = web.Lists;
context.Load(ltc);
context.ExecuteQuery();
ListCreationInformation listCreationInfo = new ListCreationInformation
Title = "New Task from Template",
Description = "Tasks created from custom template"
Microsoft.SharePoint.Client.ListTemplate listTemplate = ltc.First(listTemp => listTemp.Name == "GenTasksTemplate");
listCreationInfo.TemplateFeatureId = listTemplate.FeatureId;
listCreationInfo.TemplateType = listTemplate.ListTemplateTypeKind;
listCreationInfo.DocumentTemplateType = listTemplate.ListTemplateTypeKind;
//listCreationInfo.CustomSchemaXml =
siteListsColection.Add(listCreationInfo);
context.Load(siteListsColection);
context.ExecuteQuery();
http://www.net4geeks.com Who said I was a geek?

Yes. I can create a list with the template using the UI. I can also create list programmatically using the Microsoft.SharePoint library within a Windows Forms Application. If I do create a provider-hosted app referencing Microsoft.SharePoint,
it results in a 64bit / 32bit mismatch error. I am running SharePoint 2013 on a 64 bit Windows 2012 Server.
The problem is that with a provider-hosted SharePoint App, I am limited to only using the Microsoft.SharePoint.Client library which is very limited.
http://www.net4geeks.com Who said I was a geek?

How to set security group as primary site collection admin and secondary site collection admin using powershell in sharepoint online site - office 365?

How to set security group as primary site collection admin and secondary site collection admin using powershell in sharepoint online site - office 365?

Hi,
According to your description, my understanding is that you want to set security group as admin of primary and secondary site collection using PowerShell command in office 365.
I suggest you can use the command below to set the group to site owner, then it will have the site collection admin permission.
Set-SPOSite -Identity https://contoso.sharepoint.com/sites/site1 -Owner [email protected] -NoWait
Here are some detailed articles for your reference:
https://technet.microsoft.com/en-us/library/fp161394(v=office.15)
http://blogs.realdolmen.com/experts/2013/08/16/managing-sharepoint-online-with-powershell/
Thanks
Best Regards
Jerry Guo
TechNet Community Support

Problems with using Spry photo gallery and Opera browser

Using Dreamweaver CS3. I'm working on a website for a friend.
It looks great in:
-IE 6 and 7
-Firefox
-Safari
But in Opera, the photo gallery I put in (uses spry to change
images as the user rolls over the thumbnail) pops up a login box in
Opera. It doesn't do this in any other browser and it works
perfectly in all other browsers.
WDYT? TIA, Steve

Using Dreamweaver CS3. I'm working on a website for a friend.
It looks great in:
-IE 6 and 7
-Firefox
-Safari
But in Opera, the photo gallery I put in (uses spry to change
images as the user rolls over the thumbnail) pops up a login box in
Opera. It doesn't do this in any other browser and it works
perfectly in all other browsers.
WDYT? TIA, Steve

Getting Server Error Code: -2147024891 when using Biztalk Windows SharePoint Services Adapter to upload a document

We are currently running
1. BizTalk Server 2013 R2
2. SharePoint 2013
both in a Windows 2012 Server environment, in Azure.   The BizTalk and SharePoint are running on separate machines.
I am using the Windows SharePoint Adapter to upload a Tif file to a SharePoint document library. However, when the host instance is running under my team member's userid, I get the following error in the eventlog:
The adapter failed to transmit message going to send port "SendOwnershipToSharePoint" with URL "wss://bp1amsapt218:34392/sites/BiztalkSc/Lists/Ownership". It will be retransmitted after the retry interval specified for this Send Port.
Details:"[Microsoft.SharePoint.Client.ServerUnauthorizedAccessException] Access denied. You do not have permission to perform this action or access this resource. Server Error Code: -2147024891Trace:    at Microsoft.SharePoint.Client.ClientRequest.ProcessResponseStream(Stream
responseStream)
   at Microsoft.SharePoint.Client.ClientRequest.ProcessResponse()
   at Microsoft.SharePoint.Client.ClientRequest.ExecuteQueryToServer(ChunkStringBuilder sb)
   at Microsoft.SharePoint.Client.ClientRequest.ExecuteQuery()
   at Microsoft.SharePoint.Client.ClientRuntimeContext.ExecuteQuery()
   at Microsoft.SharePoint.Client.ClientContext.ExecuteQuery()
   at Microsoft.SharePoint.Client.Web.WebUrlFromPageUrlDirect(ClientContext context, Uri pageFullUrl)
   at Microsoft.BizTalk.KwTpm.WssAdapter.ClientOmAccessor.RequestInfo..ctor(String siteUrl, String sharePointOnlineUsername, String sharePointOnlinePassword)
   at Microsoft.BizTalk.KwTpm.WssAdapter.ClientOmAccessor.ListsAccessor..ctor(String siteUrl, String sharePointOnlineUsername, String sharePointOnlinePassword)
   at Microsoft.BizTalk.KwTpm.WssAdapter.ClientOmAccessor.ListsAccessor.TryOpenWebSite(String siteUrl, String sharePointOnlineUsername, String sharePointOnlinePassword, Exception& lastError)
This error was triggered by the Windows SharePoint Services receive location or send port with URI wss://bp1amsapt218:34392/sites/BiztalkSc/Lists/Ownership.
Windows SharePoint Services adapter event ID: 12310".
This userid has already been added to the following groups on the BizTalk Server:
Local Administrators Group
BizTalk Server Administrators
SSO Administrators
BizTalk Isolated Host Users
BizTalk Application Users
I have also made sure the userid has full control access to the SharePoint site and the document library within the site.   I have confirmed that the user with this userid is able to access the SharePoint site and can upload documents to the
document library, manually.   However, when the host instance is running under this userid, I am not able to upload documents to the SharePoint document library.
The Windows SharePoint Services Adapter is configured with the following values:
Adapter Web Service Port:   34392
Timeout:   100000
Use Client OM: Yes
Destination Folder URL: Lists/Ownership
FileName: test.tif
Overwrite: Yes
SharePoint Site URL:
http://bp1amsapt218:34392/sites/BiztalkSc/
Microsoft Office Integration: No
Do you know what the cause for this error is?   We urgently need a resolution for this?

If you create an XML document and upload it to the Windows SharePoint Services Web site. The Windows SharePoint Services adapter will take that message, archive it in the Archive document library, and then send it to the Destination document library. This
procedure demonstrates how a document flows from a Sharepoint web site, through BizTalk Server, and to a Sharepoint Services Web site using the Windows Sharepoint Services adapter.
This MSDN library article shows the procedure, please check whether it will be helpful to troubleshoot.
Create a working directory
Create an XML file
Upload the XML file
See: https://msdn.microsoft.com/en-us/library/aa560513.aspx

Using Spry.Data.XMLDataSet. Can xml file name be set to change on calendar date?

I have a website that uses Spry Data XML DataSet to list common pests for the current month. http://www.shspestcontrol.com/
Each month's list of pests is in a separate xml file (e.g. pests-august.xml)
Rather than manually updating the file name each month, can it be setup to automatically change the name
For instance on January 1st, file name changes to pests-january.xml, Feb 1st changes to pests-february.xml. etc.
<script type="text/javascript">

</script>
Any advice if this can be done and if so how to go about doing it would be much appreciated
Thanks, Toni

<script>
var dsPests1 = new Spry.Data.XMLDataSet("pests-september.xml", "gallery/pests/pest");
function setPestsFile(){
    var months = new Array(13);
        months[0] = "january";
        months[1] = "february";
        months[2] = "march";
        months[3] = "april";
        months[4] = "may";
        months[5] = "june";
        months[6] = "july";
        months[7] = "august";
        months[8] = "september";
        months[9] = "october";
        months[10] = "november";
        months[11] = "december";
    var now = new Date();
    var monthnumber = now.getMonth();
    var monthname = months[monthnumber];
    dsPests1.setURL("pests-"+monthname+".xml");
    dsPests1.loadData();
window.onload = setPestsFile();
</script>

How to use the Default sharepoint credential (DefaultNetworkCredentials )in the C#.

How to use the Default sharepoint credential (DefaultNetworkCredentials )in the C#.
I am using the copy.asmx web service to upload and download the files from sharepoint Document library to .Net application,how to get the Default sharepoint credential from the .net application?

Hello,
YOu can use below line to pass default credential in code: (You can also pass domain,username, password as string if you want)
clientService.Credentials = System.Net.CredentialCache.DefaultCredentials;
http://ktskumar.wordpress.com/2009/03/03/upload-document-from-local-machine-to-sharepoint-library/
http://sharepoint.infoyen.com/2012/02/23/upload-file-in-document-library-with-metadata-inculding-lookup-field-using-sharepoint-web-service/
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

Using Spry in Templates - please help!

I am trying to use Spry in templates (Dreamweaver CS4) and
cannot do it. Can someone please help me? I know that I can put the
spry widget inthe template but then it will be on every child page
which I don't want. I'm not sure I understand the instructions to
open the head...
-Josh

> I dont understand about opening a head...
I think it has something to do with transcendental
meditation....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"GPaul" <[email protected]> wrote in message
news:glf037$ae7$[email protected]..
> Im not sure I understand your question, however if you
dont want something
> in every child page of a template, then you put it in an
editable section
> on the child pages you do watn, or make that section
editable and take out
> on the pages that you dont want it on.
>
> I dont understand about opening a head...
>
>
> "jl25" <[email protected]> wrote in
message
> news:gldsbb$79$[email protected]..
>>I am trying to use Spry in templates (Dreamweaver
CS4) and cannot do it.
>>Can
>> someone please help me? I know that I can put the
spry widget inthe
>> template
>> but then it will be on every child page which I
don't want. I'm not sure
>> I
>> understand the instructions to open the head...
>>
>> -Josh
>>
>
>

How to check the user hits to the sites (most often,frequently used sites) in sharepoint 2010?

HI,
How to check the user hits to the sites (most often,frequently used sites) in sharepoint 2010?
could you please help on the above?

Hello Sudhir muvva,
Just to be sure, the default Web Analytics reports don't meet your requirements?
http://blogs.msdn.com/b/ecm/archive/2010/03/21/introducing-web-analytics-in-sharepoint-2010.aspx
Does reports have subjects like top pages and number of page views.
- Dennis | Netherlands | Blog |
Twitter

Using Spry in Sharepoint

Similar Messages

Maybe you are looking for