Using SUM BY or MAX BY for multiple levels

I was wondering if anyone knows if you can use the SUM BY for multiple levels e.g.
I am using the following at the moment: SUM("Fact.Value" BY Dimension.Level1), but I also want to sum the value by a different level, so adding a second 'BY' level.
I can't seem to figure if its possible. Any help would be appreciated.

Hi,
If I understood you correctly, yes, you can use for example: SUM(saw_4 by saw_1, saw_2, saw_3)
I hope this helps.

Similar Messages

How can you use the same e-mail address for multiple ipads?

I have two iPads.. an iPad and an ipad 2. I registared my new ipad 2 and now my old ipad is will not let me log on and is telling me that my e-mail address is already in use. how can you use the same e-mail address for multiple ipads?

And by using the same Apple ID you can also share purchases. If you have a different Apple ID for each iPhone then you can't share purchases.

Can we use the built-in Row fetch for Multiple reports in a page?

I need to create a page with multiple report regions. Each of it is based on a table. Those tables are different. I somewhat remembered that we can NOT use the built in automatic row fetch process if there are multiple report regions, neither the built in DML process. You have to make your own fetch and insert/update/delete process if you intend to.
Also if I write my own row fetch and update processes, do I have to consider lock mechnism? or just simply write select and insert/update?
Any input is appreciated.

I think I found the answer. Would Scott or other gurus take a look at the thread and confirm it, in case the limitation is not in 2.0?
Re: automatic row fetch
What I am concered about is that the locking mechanism. If I have to write my own process to fetch and insert/update, other than the regular select and insert/update statements, do I have to put commit by myself, or htmldb can handle it automatically? Is there an example for this?
Thanks in advance.

How to use the same mask, stencil, etc., for multiple layers? Photoshop equivalent of masked group?

Hi I spent more than half an hour to search manual, forums, and Internet and still can't find the answer. Please help!
For example, in a comp with 5 or more layers I want to use the same mask or stencil or what ever can hide areas of the layers 2,3, and 4 but layer 5 and any other eventual layers below should not be affected.

Pre-compose the layers you want to mask and apply a track matte to the pre-comp using the mask. Think of pre-composing as an equivalent of creating a layer group.
Use Set Matte effect on each of the layers you want to mask. This is easiest to do if you apply set matte once and then create an animation preset to apply to the other layers. Just get set matte to do what you want it to do on the first layer, Select Set matte in the ECW or in the Timeline, then go to Animation>Save animation preset. Then select all of the other layers you want to apply the set matte to and apply the preset.
Put the mask at the bottom of the layers you want to mask and enable the preserve transparency switch, then nest this group in the composition with the other layers.
Here's another tip. You could define a custom color for all of the layers you want to use the matt on, then use the custom color for a group selection. This may make things easier down the line.

How do you use only one plugin in Logic for multiple guitar tracks? I want to only use one instance of Pod Farm and run all my guitar tracks through that one instance.

I want to be able to use only one instance of Pod Farm for my guitars, and have all of my guitar tracks run through it while I'm recording.

What he said. Or here is a similar approach with a picture.
1. Press the SEND button on every stereo (or mono) guitar track you want to send through the effect. Then select a free bus.
2. Make sure you turn up the amount of send (in db). Holding alt while leftclicking on this circle sets the send level to 0 db wich is good.
3. Open the mixer (Cmd+2). Please see that I here have turned the output off from the stereo guitar track. That way the only output will be the BUS, in your case the AmpTrack bus where all your guitars will pass through. If you want both the original guitar sound AND the Ampfarm effect then just set all outputs on your guitar tracks to Stereo Out, like the AmpF Bus track is set in my picture.
4. Insert your AmpFarm plugin here. I don´t have that plug so I inserted Waves Renes Axe for demo purpose.
Adjust the volume/effect of every guitartrack by turning the circle input shown as 2. in my picture.
I now see that you mentioned Pod Farm, not AmpFarm. But I guess it´s the same trick.
Have fun.
Heyclown.
Message was edited by: WizardSongs - Typhoos

Using a single master data infoobject for multiple fields

Hello experts. Today I ran un with the following problem: I am modelling an Infocube and will be receiving a flat file with several fields, of which 3 of them give information about sales representatives.
For each transaction there are 1-3 sales representatives involved, and this is reflected in the file I am going to be loading. If only one representative is involved, it means that he was in charge of a complete negotiation, and his code will be found in all three fields, if two representatives are involved, it means that one was in charge of one part of the negotiation, while the other was in charge of the rest, and according to what they were in charge, their code will appear in one or two of the fields. If three representatives are involved, each one's code will appear on the field corresponding to the part of the negotiation they were in charge of handling.
I already have the sales representative's codes as master data, but I was wondering how I can have those three fields map into the same InfoObject, if that is possible at all. Maybe in the transformation I map them to the same object? Also, what happens when you create the Data Source? As far as I know, each field in the Data Source must be unique, which makes it impossible to use my ZSALESREP InfoObject for the three fields, at least at Data Source level. What can I do in this case?

Hi Pedro Olvera,
You need 3 infoobjects in datasouce to load 3 different fields.
If you want load to a single infoobject, you can map accordingly in transformation, bult last field overwrites previous one.
Its better to maintain 3 fields in cube. Create 2 more sales Reps(ZSALESREP1 & ZSALESREP2) with Reference to ZSALESREP then you no need to maintain master data for ZSALESREP1 & ZSALESREP2.
Use these 3 fields for modeling.
Hope it Helps
Srini
[Dont forget to close the call by assigning poings.... - Food for Points: Make a Difference through Community Contribution!|https://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/007928c5-c4ef-2a10-d9a3-8109ae621a82]

Using a single HeaderHandler of JaxWS for multiple services

Hi,
In our application,we are using 3 different services.The authentication credentials are different for each one of them.So,we have created 3 different Headerhandlers for each one of them.
I wish to know if it is possible to have a single HeaderHandler for all 3 services.Please let me know if we can set the username/password in Headerhandler at runtime.
I am not able to pass the parameters in handleMessage(SOAPMessageContext smc).
Please suggest.

Hi Phillip,
both scenarios will work. One CSS can certainly manage more than 3 services! You can even use just one VIP for all traffic, then just create the proper rules to send specific traffic to the corresponding service(s). No need for 3 VIPs.
Regards
-juerg

Solution Needed: Using VPN as a Jump off for multiple users to connect outbound to multiple 3rd party VPN

I work for a healthcare consulting company, we have 50+ consultants that work remotely from their home. We currently are cloud managed and for various reasons are looking for a solution to streamline our connection to our Clinics' personal VPNs. Our Clinics' VPNs vary greatly in regards to vendor and type of connection.
What we want to do:
Create a Jumpoff where all our consultants (simultaneously as well) can remote VPN into. From there be able to jump out to any of our Clinics' VPNs.
We need this because we have some consultants with foreign IPs and we also want to connect from Google Chromebooks which don't play nice with every type of our Clinics' VPNs. So the our Jump Off Box will have all the needed connections for any type of VPNs our Clinics use.
This solution should connect to our Clinics' side from their default VPN settings - Just a regular VPN connection from us to them.
From what I have been told is that this was attempted in the past:
Consultants VPN'd to our cloud server - RDPd to a machine and then VPNd out to our clinics. However this locked down the VPN and only one consultant could jump out.
What Cisco Product would allow us to do so?
How would this be set up?
Do we set up the Router to handle outbound connections?
Any input would be greatly appreciated.

Hi Jay, there are a number of ways you can do this I can help you setup an initial recommendation on what products to get please send me an email at [email protected] hope to hear from you soon!

Using XP Pro's Remote Desktop for multiple systems behind my Linksys WRT54G

I would like to be able to use Windows XP Pro's "Remote Desktop" application to access more than one system behind my WRT54G router.
I understand that I need to use Port Forwarding on the router to do this, but how can I set it up to enable access to any of the 4 systems that are behind it?
Thx in advance

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\WinStations\RDP-Tcp
look for the entry "PortNumber", this will be a hexidecimal entry, so you will have to click decimal when you edit it, save to the new RDP connection port you want, say 3390 for machine 2, 3391 for machine 3, and so on, and reboot for it to take effect.
Then to connect to it from the RDP client (once you make the forwarding entries in your router of course), it's just whateverIP-DNSname: port in the connection window.Message Edited by Wayne613 on 02-23-200708:06 PM
Buffalo WHR-HP-G54 (openwrt firmware)
Linksys 600n
QNAP TS-639 NAS

Max. no. for multiple selection

Hi all,
Is there any maximum limit for the no. of input parameters on selection screen?

Technically there may or may not be a restriction, but more appropriate question would be why you want to hit that limit? Let us say I add 100 elements to the selection screen. Do you think the user will be comfortable working with such a complex selection screen?
Coming to the number of entries, there are limitations on how big your SELECT statement can be which is more a limitation of the underlying database than SAP restriction. So if I add say 100000 single values on to a select option instead of a range, then there may be a dump. Again, it will be a design issue, whether it should be filled that way or is there a way to fill ranges instead of single values.
It is more a ergonimical design issue than the real limits, unless you are experimenting to test the limits.

Userform Login for Multiple Level User

Hello,
I have a shared workbook which uses by multiple users, i ask to set a user form login have a different authorization level.
this workbook have 6 spreadsheets.
1st sheet: is the interface contain login image that when hit it the Userform Login popup
2nd sheet: called SLA Calendar this worksheet will available for all the users
3ed sheet: called SysUse this will available for Admins only
and the other sheet concern the creator
I have 3 levels criteria for users to deal with the workbook: i have been inserted the users, admins and creator and them passcodes in sheet called Login
authorization levels: want to worksheet opened permanently in Interface worksheet to login
Users permission: want to workbook ribbons and formula bar will be auto-hidden and when he insert the valid username and password will move to SLA Calendar sheet and the other sheets will be very
hidden
Admins Permission: the same permission for Users but let SysUse sheet to be shown the other sheets will be very hidden
Creator Permission: all workbook sheets will be available.
I hope if can i obtain the Admins activities in SysUse sheet with times and dates, there is a empty table for users and time in Login sheet for this activities as when
any Admin make any modification in the sheet his user and action time will be available in this table
the attached sheet
Gratefully,

Hi,
Your required could be done via VBA code, please see the video about it:
http://www.youtube.com/watch?v=8ULrJBnQBAE
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
If you need further help about the VBA, please post your question to the MSDN forum for Excel
http://social.msdn.microsoft.com/Forums/en-US/home?forum=exceldev&filter=alltypes&sort=lastpostdesc
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

How to retrieve comments from one OfficeTask activity and use them in another OfficeTask activity for Multi level Approval sequential Workflow

I'm designing a sequential site workflow using Visual Studio 2010 for Project Server 2010. In my case, I have following 6 stages in the workflow:
1. InitialProposal Stage
2. Approval Stage1 -- Needs approval from Approver Project Security Group Members1
3. Rejection Stage
4. Approval Stage2 -- Needs approval from Approver Project Security Group Members 2
5. Execution Stage
6. Completed Stage
Requirement is workflow should move to Approval stage2 from Approval stage1 if approved by all members of Approver Project Security Group1and it should move to Rejection Stage even if a single member rejects it.
Workflow should move from Approval Stage2 to Execution Stage if approved by all members of Approver Project Security Group2 and it should move back to Approval Stage1 on rejection by a single member of the group.
I'm using inbuilt PSWApproval content type and OfficeTask activity for creating approval task for the group members at both stages.
On task rejected in Approval stage2, task will be assigned again to Approval Stage1 and I want to show comments given by members of Approver Project Security Group2 to the members of Approver Project Security Group1 with this assigned task
but I'm not able to retrieve comments from officeTask activity.
My question is where exactly these comments are saved? how can we retrieve them and use them in another officetask activity? If this is not possible then what is the possible solution for meeting above mentioned business requirement?

Hi Paul,
Thanks for your suggestion.
By comments field I'm assuming OfficeTask.Comments field. Problem is, this field is always null. I tried accessing this field in CheckExitCondition activity as well as in OnTaskCompleted but in both the cases, it was null only(I wrote comments while approving
the task).
I used a code activity within OnTaskCompleted activity and following code for accessing Comments and Description fields:
public string officeComments;
public string officeDescription;
private void TaskCOmplete(object sender, EventArgs e)
CodeActivity Sender = (CodeActivity)sender;
Microsoft.Office.Workflow.Actions.OfficeTask ofctask1 = ((CompositeActivity)Sender.Parent).Parent as Microsoft.Office.Workflow.Actions.OfficeTask;
officeComments = ofctask1.Comments;
officeDescription = ofctask1.Description;
Please tell me if I'm doing anything wrong here, I'm very new to Workflows. Also, do I need to set any specific property of officeTask for retriving comments?
Thank you

3.4: keyword auto-completion not working for multiple levels

Auto-completion does not work with higher level keywords, which used to work in LR 3.3 (IIRC).
Example:
I enter in the "Click here to add keywords" field:
"He" then LR tries to complete the keyword by showing keywords starting with "He". Fine.
But this is a keyword which does not exist so far, so I enter "Heldenplatz > W" because I want to have sorted it under Wien. If I'm not mistaken, LR 3.3 showed after entering the "W" a list of existing keywords starting with W (auto-completion for the one level higher tag). This is not the case anymore. I have to enter "Heldenplatz > Wien" completely, which makes it slow and error-prone.
Am I mistaken or can you reproduce it?
Cheers

GaryRowe wrote:
How can it be, after all this time, that they still do not have effective regression testing in place ? Any sane development team (who wants to remain sane ;-) builds this as a priority ... unless they aren't given the resources?
I think (don't remember though) that this never worked, so regression testing would not have helped.
What is really to worry, that features aren't consequently and completely implemented (and tested). With a new option in Lightroom 3, Adobe has offered support for keywords with spaces. It seems that this feature as neither been thoroughly analysed or implemented. Thus, we face the currently inconsequent support of it:
keyword completion only works with the first entered word, but when you enter a complete keyword hierarchy using the ">" letters
filtering seems to have problems too

Sortby not working for multiple levels

Hi,
I have a complex LD Query with 4 level schema.
This query uses oracle db views as data source.
When we don't use sortby - The order of the results returned is not the same as what the view returns. Somehow the ordering changes in the query.
Using sortby - All the levels get sorted expect the 1st level. The inner 3 levels get sorted right.
Why don't the results get ordered properly?
- vineet

You've encountered a bug in the previous release. This occurs only when you have a sortby on top of another sortby on top of an outer-join that is pushed to an Oracle database. We've worked-around it by preventing the outer-join from being pushed to the database.
- Mike

Can we use the same credit card for multiple customers???

One of my clients has a requirement where they need to use the same Credit Card number for multiple customers. I have looked into the possibility of using the 'Alternate Payer' functionality but besides that is there any other way SAP can be tweaked to accept the same credit card on multiple customer accounts?
Thanks in advance for any help or guidance you may provide.
SJ

I know SAP throws an error message which is why I was looking for a solution. I do have a work around. By pointing to an 'Alternate Payer' on the Payment Transactions tab on the customer master you can have a credit card on this alternate payer master record and use this payer on several other customers. All these customers will not have any credit card stored on their master records.
Thanks for your response though.

Using SUM BY or MAX BY for multiple levels

Similar Messages

Maybe you are looking for