Problems starting SAP NetWeaver AS Trial Version
Hello Forum,
Here is the summary of problem that I am facing starting SAP Netweaver AS Trial Version (post suucessful installation). I am mentioning successful installation is because on the day of the installation, I could start the NetWeaver AS Server and login using user BCUSER and go into SE80 (Object Navigator). The trouble started appearing thereafter.
Here is the summary -
When I dont have MS loopback Adapter activated on my Laptop, I get the following in SAP MMC
The dispatcher process thread begins but haves a status - cannot connect to the message server
When I install and activate MS loopback Adapter on my Laptop, I get the following in SAP MMC
The Message Server and Dispatcher Starts Off, After a while (a minute), Dispatcher status turns to Message Server COnnection OK, Dialog Queue Time 0:00, after a While (a minute), it gives a message and stops. After this point Message Server is shown as running and Dispatcher is stopped.
I am attaching the dev_disp for reference. Obviously I think the problem lurking somewhere in the midst of Network Adapter Configuration - Please help me to resolve the same.
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid NSP
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 95
intno 20050900
make: multithreaded, ASCII, optimized
pid 4808
Tue Oct 27 07:45:11 2009
kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 4808) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 95 successfully loaded
shared lib "dw_xtc.dll" version 95 successfully loaded
shared lib "dw_stl.dll" version 95 successfully loaded
shared lib "dw_gui.dll" version 95 successfully loaded
shared lib "dw_mdm.dll" version 95 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
ERROR => DpNetCheck: NiServToNo(sapgw00) failed (rc=-3) [dpxxtool2.c 5217]
Tue Oct 27 07:45:15 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >UKCL515803_NSP_00 <
DpShMCreate: sizeof(wp_adm) 6328 (904)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1280)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 04F00040, size: 4205552)
DpShMCreate: allocated sys_adm at 04F00040
DpShMCreate: allocated wp_adm at 04F01A28
DpShMCreate: allocated tm_adm_list at 04F032E0
DpShMCreate: allocated tm_adm at 04F03310
DpShMCreate: allocated wp_ca_adm at 052735A0
DpShMCreate: allocated appc_ca_adm at 05273A50
DpShMCreate: allocated comm_adm at 05273F00
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 052F4DB0
DpShMCreate: allocated gw_adm at 052F4DF0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 052F4E20
DpShMCreate: allocated wall_adm at 052F4E28
MBUF state OFF
DpCommInitTable: init table for 500 entries
Tue Oct 27 07:45:16 2009
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( UKCL515803) [dpxxdisp.c 11663]
DpStartStopMsg: send start message (myname is >UKCL515803_NSP_00 <)
DpStartStopMsg: start msg sent
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off.
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 95
Release check o.K.
Tue Oct 27 07:45:56 2009
MBUF state ACTIVE
ERROR => gateway (pid 5188) died [dpxxdisp.c 15372]
DpGwCheck: appc_adm.stat = 2
DP_FATAL_ERROR => Gateway could not be started - I better exit now
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
[DpWpDied] W0 lives (PID:5072 HANDLE:1616)
killing W0-5072 (SIGUSR2)
[DpWpDied] W1 lives (PID:3868 HANDLE:1612)
killing W1-3868 (SIGUSR2)
[DpWpDied] W2 lives (PID:5148 HANDLE:1608)
killing W2-5148 (SIGUSR2)
[DpWpDied] W3 lives (PID:5004 HANDLE:1604)
killing W3-5004 (SIGUSR2)
[DpWpDied] W4 lives (PID:1640 HANDLE:1600)
killing W4-1640 (SIGUSR2)
[DpWpDied] W5 lives (PID:4780 HANDLE:1596)
killing W5-4780 (SIGUSR2)
[DpWpDied] W6 lives (PID:4108 HANDLE:1592)
killing W6-4108 (SIGUSR2)
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:06 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
max_rq_id 37
wake_evt_udp_now 1
wake events total 37, udp 9 ( 24%), shm 28 ( 75%)
since last update total 37, udp 9 ( 24%), shm 28 ( 75%)
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:11 2009
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >UKCL515803_NSP_00 < (normal)
DpJ2eeDisableRestart
read msgserver-list from MBUF
DpMBufMod: name [UKCL515803_NSP_00 ], types 159 state 3 (0x0 0x0 0x0 0x0)
AdGetSelfIdentRecord: > <
WARNING => wp_ca_blks low (in queue 6, max 20) [dpxxdisp.c 13116]
NiBufIAlloc: malloc wp ca_blk, to 1188 bytes
ALLOC local ca_blk 10000 (len 1188)
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 38)
MBUF server state SHUTDOWN
DpModState: change state STARTING -> SHUTDOWN
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
[DpWpDied] W0 lives (PID:5072 HANDLE:1616)
[DpWpDied] W1 lives (PID:3868 HANDLE:1612)
[DpWpDied] W2 lives (PID:5148 HANDLE:1608)
[DpWpDied] W3 lives (PID:5004 HANDLE:1604)
[DpWpDied] W4 lives (PID:1640 HANDLE:1600)
[DpWpDied] W5 lives (PID:4780 HANDLE:1596)
[DpWpDied] W6 lives (PID:4108 HANDLE:1592)
Stop work processes
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:12 2009
NiISelect: TIMEOUT occured (1000ms)
wait for end of exclusive shutdown
[DpWpDied] W0 died (PID:5072 HANDLE:1616)
[DpWpDied] W1 died (PID:3868 HANDLE:1612)
[DpWpDied] W2 died (PID:5148 HANDLE:1608)
[DpWpDied] W3 died (PID:5004 HANDLE:1604)
[DpWpDied] W4 died (PID:1640 HANDLE:1600)
[DpWpDied] W5 died (PID:4780 HANDLE:1596)
[DpWpDied] W6 died (PID:4108 HANDLE:1592)
Stop icman
killing process (5208) (SOFT_KILL)
Terminate gui connections
send SHUTDOWN to REM TM 7
blks_in_queue/wp_ca_blk_no/wp_max_no = 6/20/7
WARNING => wp_ca_blks low (in queue 6, max 20) [dpxxdisp.c 13116]
NiBufIAlloc: malloc wp ca_blk, to 14 bytes
ALLOC local ca_blk 10001 (len 14)
return errno (-17) to T7
errormsg without overhead: take mode 0
FREE local ca_blk 10001 (len 14)
try to send 14 to M0
NiBufSend starting
NiIWrite: hdl 4 sent data (wrt=14,pac=1,MESG_IO)
set status of T7 to TM_DISCONNECTED
NiBufISelUpdate: new MODE -- (r-) for hdl 4 in set0
SiSelNSet: set events of sock 1556 to: ---
NiBufISelRemove: remove hdl 4 from set0
SiSelNRemove: removed sock 1556
NiSelIRemove: removed hdl 4
DpDelSocketInfo: del info for socket 4 (type=3)
NiICloseHandle: shutdown and close hdl 4 / sock 1556
NiBufIClose: clear extension for hdl 4
dp_tm_adm[7].stat = DP_SLOT_FREE
DpAMCancel: new state of T7/M0 = 0x19
DpAMCancel: set status of M0 to MODE_CANCEL
DpAMCancel: new state of T7/M7 = 0x8
DpAMCancel: set status of M7 to MODE_CANCEL
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 39)
wake_evt_udp_now 1, no dgram needed
created LOGOFF request for T7 U8 M0 !!
wait for end of work processes
[DpWpDied] W0 handle not set (PID:5072)
[DpWpDied] W1 handle not set (PID:3868)
[DpWpDied] W2 handle not set (PID:5148)
[DpWpDied] W3 handle not set (PID:5004)
[DpWpDied] W4 handle not set (PID:1640)
[DpWpDied] W5 handle not set (PID:4780)
[DpWpDied] W6 handle not set (PID:4108)
wait for end of icman
[DpProcDied] Process lives (PID:5208 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:13 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5208 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:14 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5208 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:15 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5208 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:16 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:5208 HANDLE:1636)
DpStartStopMsg: send stop message (myname is >UKCL515803_NSP_00 <)
NiIMyHostName: hostname = 'UKCL515803'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Tue Oct 27 07:46:17 2009
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11976]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1584 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1584 (pos=2)
SiSelNRemove: removed sock 1584
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 6/20/7
WARNING => wp_ca_blks low (in queue 6, max 20) [dpxxdisp.c 13116]
NiBufIAlloc: malloc wp ca_blk, to 356 bytes
ALLOC local ca_blk 10001 (len 356)
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 42)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1584
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 4808) [dpxxdisp.c 10333]
Good Bye .....
Hi Sunny,
Thanks for the reply. I checked NETSTAT command and none of the known ports used by SAP is occupied on my laptop.
Also, when I use NIPING - it gies me a familiar message WASNOTREACHED...
I have also attached my IPCONFIG /ALL Output, if somebody could help further.
Windows IP Configuration
1.0.0.127.in-addr.arpa
Record Name . . . . . : 1.0.0.127.in-addr.arpa.
Record Type . . . . . : 12
Time To Live . . . . : 600511
Data Length . . . . . : 4
Section . . . . . . . : Answer
PTR Record . . . . . : localhost
localhost
Record Name . . . . . : localhost
Record Type . . . . . : 1
Time To Live . . . . : 600511
Data Length . . . . . : 4
Section . . . . . . . : Answer
A (Host) Record . . . : 127.0.0.1
C:\Documents and Settings\utxk13>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : UKCL515803
Primary Dns Suffix . . . . . . . : drink.brew.beer
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : sn.brew.beer
brew.beer
drink.brew.beer
scottishcourage.com
scottish-newcastle.co.uk
ghodom1.scottish-newcastle.co.uk
heiway.net
nl.heiway.net
Ethernet adapter Wireless Network Connection:
Media State . . . . . . . . . . . : Media disconnected
Description . . . . . . . . . . . : Intel(R) WiFi Link 5100 AGN
Physical Address. . . . . . . . . : 00-22-FA-57-5E-D4
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : drink.brew.beer
Description . . . . . . . . . . . : Intel(R) 82567LM Gigabit Network Co
nection
Physical Address. . . . . . . . . : 00-26-55-11-C8-04
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : No
IP Address. . . . . . . . . . . . : 10.10.210.204
Subnet Mask . . . . . . . . . . . : 255.255.254.0
Default Gateway . . . . . . . . . : 10.10.210.1
DHCP Server . . . . . . . . . . . : 10.10.160.167
DNS Servers . . . . . . . . . . . : 10.10.160.38
10.10.236.10
Lease Obtained. . . . . . . . . . : 27 October 2009 08:10:17
Lease Expires . . . . . . . . . . : 31 October 2009 08:10:17
Ethernet adapter Local Area Connection 3:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Loopback Adapter
Physical Address. . . . . . . . . : 02-00-4C-4F-4F-50
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 10.10.0.10
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Regards
Tushar Kansara
Similar Messages
-
Problems installing SAP NetWeaver 2004 trial version from book DVD
Hi
I'm trying to install netweaver trial version from the dvd in Horst Keller's book ABAP Objects but am having problems. I have tried to uninstall and start again but I keep getting the message below. Any suggestions welcome as I'm new to all this.
(Apr 1, 2008 11:59:57 AM), Install, com.installshield.product.actions.DeleteDirectory, err, An error occurred and product installation failed. Look at the log file D:\SAP\NSP\log.txt for details.
(Apr 1, 2008 11:59:57 AM), Install, com.installshield.product.actions.DeleteDirectory, err, ProductException: (error code = 601; message="err"; additional data = [Unable to delete D:\SAP\NSP\_installTemp : ServiceException: (error code = -30020; message = "The directory is not empty.
(145)"; severity = 0)])
STACK_TRACE: 14
ProductException: (error code = 601; message="err"; additional data = [Unable to delete D:\SAP\NSP\_installTemp : ServiceException: (error code = -30020; message = "The directory is not empty.
(145)"; severity = 0)])
at com.installshield.product.actions.DeleteDirectory.deleteDirectory(Unknown Source)
at com.installshield.product.actions.DeleteDirectory.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)Hello Sharon,
I don't know this book you've mentioned, but perhaps it's the same trail version as you can download from SAP.
To uninstall it please go through the steps provided in the first part of the following site --> link
Then try to delete the D:SAPNSP-folder again.
Also please check your services-file under C:WINDOWSsystem32driversetc that there aren't any entries like NSP left.
Regards,
Norman Schröder -
Installation problem of SAP NetWeaver SP9 Trial version
Hi everyone,
I installed SAP NW 2004s Java SP9 Trial. But when I run the server, the status of the process <b>jcontrol.exe</b> is "stopped", while other processes are launched.
The file <b>instance.properties</b> was not created, and In the "<b>Developer trace</b>", I get the following message:
trc file: "D:\usr\sap\J2E\JC01\work\dev_jcontrol", trc level: 1, release: "700"
node name : jcontrol
pid : 1228
system name : J2E
system nr. : 01
started at : Fri Nov 30 11:20:33 2007
arguments :
arg[00] : D:\usr\sap\J2E\JC01\exe\jcontrol.EXE
arg[01] : pf=D:\usr\sap\J2E\SYS\profile\J2E_JC01_ahassaine
[Thr 2728] Fri Nov 30 11:20:33 2007
[Thr 2728] *** ERROR => Can't open property file [D:\usr\sap\J2E\JC01\j2ee\cluster\instance.properties] [jstartxx.c 725]
[Thr 2728] *** ERROR => Can't open property file [D:\usr\sap\J2E\JC01\j2ee\cluster\instance.properties] [jstartxx.c 1952]
[Thr 2728] *** ERROR => JStartupReadArgumentsEx: can't enumerate nodes [D:\usr\sap\J2E\JC01\j2ee\cluster\instance.properties;D:\usr\sap\J2E\JC01\SDM\program\config\sdm_jstartup.properties] (rc = -1) [jstartxx.c 524]
How can i do, to solve this problem ?
Thanks & Regards
HassanYou might have to configure the java server first. Have you looked at this forum thread -> Cannot start j2ee engine after installation?
Hope that helps.
J. Haynes
Denver, CO
Message was edited by:
Joe Haynes -
Problems when installing the SAP Netweaver 2004s Trial version on Fedora 9
Dear all,
I have been trying to install the SAP Netweaver 2004s Trial version on Fedora 9, 64 bit, x86_64, but have not been able to accomplish this correctly.
New to the Linux environment as well, and hence not completely sure about the issues here. According to the steps outlined for the installation, i downloaded and installed the IBM Java SDK and then executed the install.sh script file from the download.
The installation went well, but when i try to start the sap system using the command startsap, i get the error message command not found.
Could anyone please guide.
Thanks,
Dabre> The installation went well, but when i try to start the sap system using the command startsap, i get the error message command not found.
as which user did you execute that command?
Markus -
Install Trial BO like SAP Netweaver ABAP Trial version
Hello, i would like to know if it´s possible to install some trial Version of BO in orther to install it in my laptop like i´ve just done with the SAP Netweaver ABAP Trial Version 701 (With SAP-BW 70).
I know that that there are some links to download BO software but i really don´t know where to start and if there is any problem with the installation on my laptop with MaxDB ans SAP server installed... basically i have installed SAP with BW in my laptop and it´s working ok. Wich software may i install and wich are the requirements if i want to practice with BO ?
I´ve just downloaded BO from the following link but it´s the correct one ?
http://www.businessobjects.com/forms/datasave.asp?id=701600000008kgy
Besides this i´ve just found another one
https://www.sdn.sap.com/irj/boc/business-objects-for-sap?rid=/webcontent/uuid/806c9894-42a5-2b10-648a-d900489b76da
Wich one i have to install ? it´s the same ? it works with OS XP-Pro ? anything else to install ?
Thanks in advance,
Best regards,
Joaquin CasasHi,
this should get you started:
Install Part #1
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-1-of-4
Install Part #2
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-2-of-4
Install Part #3
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-3-of-4
Install Part #4
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-4-of-4
SAP Authentication
/people/ingo.hilgefort/blog/2008/09/19/businessobjects-and-sap--configure-sap-authentication
Publishing part 1
/people/ingo.hilgefort/blog/2008/09/23/businessobjects-and-sap--publishing-of-crystal-reports-part-1-of-3
Publishing part 2
/people/ingo.hilgefort/blog/2008/09/24/businessobjects-and-sap--publishing-of-crystal-reports-part-2-of-3
Publishing part 3
/people/ingo.hilgefort/blog/2008/09/24/businessobjects-and-sap--publishing-of-crystal-reports-part-3-of-3
XC, CR and LO Part 1 of 4
/people/ingo.hilgefort/blog/2008/10/03/businessobjects-and-sap-part-1-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
XC, CR and LO Part 2 of 4
/people/ingo.hilgefort/blog/2008/10/07/businessobjects-and-sap-part-2-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
XC, CR and LO Part 3 of 4
/people/ingo.hilgefort/blog/2008/10/07/businessobjects-and-sap-part-3-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
XC, CR and LO Part 4 of 4
/people/ingo.hilgefort/blog/2008/10/10/businessobjects-and-sap-part-4-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
Technical Material
/people/ingo.hilgefort/blog/2008/11/19/businessobjects-integration-with-sap-netweaver-bi--technical-material
In regards to the supported platforms look at http://service.sap.com/bosap-support
Ingo -
SAP Netweaver ABAP Trial Version password expired
Hi All,
I just got an installer for the SAP NetWeaver ABAP Trial Version and I was able to install the Trial version. However, my license have already expired. So what I did was is to renew the license. But my problem right now is that I can't logon using BCUSER. I'm getting "Logon not possible (error in license check".
During the time when I renew the license, i didn't encounter any errors or problems.
Could anybody tell me what I'm doing wrong?
How can I have BCUSER up and running since I need this account to practice ABAP?
I tried deleting the old license using SAP* user because I don't think it is possible to do using that user.
Thanks
JamesI have had a similar issue but the above remedy did not fix my problem. I had successfully installed the trial version and used it until the license expired. After downloading a new license, I installed it using SAP*. The installation was successful however, when trying to login using BCUSER I am still getting that same error.
Under slicense, user sap*, I have the following:
NSP TEMPLICENSE NetWeaver_ADA 26.10.2008 25.01.2009 Perm DEMOSYSTEM 000000000311079138 Valid
Sorry for the sloppy cut&paste but you can see that the install appears to be valid.
Is my only recourse to uninstall and reinstall the trial version? Also, is there some way for me to backup any of the work I have done in SE80 before wiping the install?
Thanks in advance,
Rob -
Error Install SAP Netweaver ABAP Trial Version 7.01
Hello everyone,
I'm trying to install SAP Netweaver ABAP Trial Version 7.01.
My operating system is Windows XP Professional.
I have 3 GB of RAM and 80 GB of free space.
Unfortunately, the installation process is stuck in:
Phase 18 of 27
Import Monitor jobs: running 3, waiting 20, completed 5, failed 0, total 28.
In log files there is no error.
However, after 3 hours the installation stops.
Can anyone help please?
Regards,
VivianeHi all,
Unfortunately I don't have this directory after the error of installation.
I have the following directories:
C: \ usr \ sap \ NSP \ DVEBMGS00
C: \ usr \ sap \ NSP \ SYS
C: \ usr \ sap \ NSP \ tmp
NSP = SID
I looked for errors in the log files but not found. Below is the log file import_monitor.log
INFO: 2010-03-16 21:05:31
Import Monitor is started.
CONFIG: 2010-03-16 21:05:31
Application options:
dbCodepage=4103
dbType=ADA
extFiles=no
importDirs=C:\docs\SAPNWABAP701SR1_TRIAL\SAP_NetWeaver_701_SR1_Export\DATA_UNITS\EXP1;C:\docs\SAPNWABAP701SR1_TRIAL\SAP_NetWeaver_701_SR1_Export\DATA_UNITS\EXP2;C:\docs\SAPNWABAP701SR1_TRIAL\SAP_NetWeaver_701_SR1_Export\DATA_UNITS\EXP3
installDir=C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL
jobNum=3
loadArgs=-nolog -c 50000
monitorTimeout=30
orderBy=
r3loadExe=C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe
sapinst=
trace=all
tskFiles=yes
CONFIG: 2010-03-16 21:05:31
List of packages with table structure: 'SAP0000'.
CONFIG: 2010-03-16 21:05:31
List of packages with views: 'SAPVIEW'.
TRACE: 2010-03-16 21:05:31 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\DDLADA.TPL' template file is started.
INFO: 2010-03-16 21:05:31 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\DDLADA.TPL' template file is successfully completed.
Primary key creation: before load.
Index creation: after load.
INFO: 2010-03-16 21:05:32
Data codepage 4103 is determined using TOC file 'C:\docs\SAPNWABAP701SR1_TRIAL\SAP_NetWeaver_701_SR1_Export\DATA_UNITS\EXP1\DATA\ATAB.TOC' for package 'ATAB'.
TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask run
Loading of 'REPOSRC' import package is started.
TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'REPOSRC' import package:
C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe -ctf I C:\docs\SAPNWABAP701SR1_TRIAL\SAP_NetWeaver_701_SR1_Export\DATA_UNITS\EXP1\DATA\REPOSRC.STR "C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\DDLADA.TPL" REPOSRC.TSK ADA -l REPOSRC.log
TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask run
Loading of 'DOKCLU' import package is started.
TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'DOKCLU' import package:
C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe -ctf I C:\docs\SAPNWABAP701SR1_TRIAL\SAP_NetWeaver_701_SR1_Export\DATA_UNITS\EXP1\DATA\DOKCLU.STR "C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\DDLADA.TPL" DOKCLU.TSK ADA -l DOKCLU.log
TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC_1' import package is started.
TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSSEXC_1' import package:
C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe -ctf I C:\docs\SAPNWABAP701SR1_TRIAL\SAP_NetWeaver_701_SR1_Export\DATA_UNITS\EXP1\DATA\SAPSSEXC_1.STR "C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\DDLADA.TPL" SAPSSEXC_1.TSK ADA -l SAPSSEXC_1.log
TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask processPackage
Loading of 'DOKCLU' import package into database:
C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe -i DOKCLU.cmd -dbcodepage 4103 -l DOKCLU.log -nolog -c 50000
TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask processPackage
Loading of 'REPOSRC' import package into database:
C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe -i REPOSRC.cmd -dbcodepage 4103 -l REPOSRC.log -nolog -c 50000
TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSSEXC_1' import package into database:
C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe -i SAPSSEXC_1.cmd -dbcodepage 4103 -l SAPSSEXC_1.log -nolog -c 50000
INFO: 2010-03-16 21:15:34 com.sap.inst.migmon.LoadTask run
Loading of 'DOKCLU' import package is successfully completed.
TRACE: 2010-03-16 21:16:02 com.sap.inst.migmon.LoadTask run
Loading of 'SMIMCONT1' import package is started.
TRACE: 2010-03-16 21:16:02 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SMIMCONT1' import package:
C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe -ctf I C:\docs\SAPNWABAP701SR1_TRIAL\SAP_NetWeaver_701_SR1_Export\DATA_UNITS\EXP1\DATA\SMIMCONT1.STR "C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\DDLADA.TPL" SMIMCONT1.TSK ADA -l SMIMCONT1.log
TRACE: 2010-03-16 21:16:29 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SMIMCONT1' import package into database:
C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe -i SMIMCONT1.cmd -dbcodepage 4103 -l SMIMCONT1.log -nolog -c 50000
Below the log file import_monitor.java
java version "1.4.2_19"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_19-b04)
Java HotSpot(TM) Client VM (build 1.4.2_19-b04, mixed mode)
Import Monitor jobs: running 1, waiting 27, completed 0, failed 0, total 28.
Import Monitor jobs: running 2, waiting 26, completed 0, failed 0, total 28.
Import Monitor jobs: running 3, waiting 25, completed 0, failed 0, total 28.
Loading of 'DOKCLU' import package: OK
Import Monitor jobs: running 2, waiting 25, completed 1, failed 0, total 28.
Import Monitor jobs: running 3, waiting 24, completed 1, failed 0, total 28.
Below the 'last log file created before the abrupt interruption of the installation:
File name: SMIMCONT1.log -
Logical system for client 001 for SAP NETWEAVER ABAP TRIAL VERSION for BI
Hi,
I have installed SAP NETWEAVER ABAP TRIAL VERSION for BI. In that I have to create logical system for client 001. I have taken a list of available clients from the abap R3 side. Here is a list of it.
Clients View
Cl. Name City Crcy
000 SAP AG Konzern Walldorf EUR
001 Auslieferungsmandant R11 Kundstadt USD
066 Test EarlyWatch Profiles Walldorf EUR
I cannot get inside the BW side for it asks me to create a logical system for client 001. What to do?
Kindly help me.
Kannanhi,
? First log on to SAP R/3 server connections Go to SCC4 in R/3 & in Scc4 BW server. A screen opens in that logical name of the system would be opened in both (R/3 & BW).
? Take notepad in it save .R/3 & BW logical names go to R/3 & click SM59 to create R/3 connections click then a screen opens gives BW logical name in RFC Destination option & give connection. type 3 & give some description & then press enter.
? You will get another screen under it then at target host gives BW server name we will get it from BW logon change ID, IP address option & give the system no. The system no go to logon pad just drag it then you will see the name.
? Then click on log on securities go to log on give BW server details like No, client user Password. Then save it then click test connection tab if there are errors then it gives yellow color if they are no error the whole thing come as white.
? Then click on the Remote Logon then we go to BW server give RFC SM59 & click create. Then give the server name which is at the bottom right corner give it then give the no, name, password in logon Security save it & test connection & then remote logon.
? R/3 - B W - R/3
? Logical connection source system connection is used to transfer the data from R/3 to BW. Go to BW system& click RSA1 go to source system option go to top to the source systems right click on it. Then click create then a screens opens then.
? PC ?Flat file , DB ? Database
? Select the option manual then a screen appears RFC Destination, Logical source name then click OK then it goes to opens other screen save it test connection then remote login then it go back to the then a screen opens then click only activate.
? BW ? RS1 ? SOURCE SYSTEM ? CREATE MANUAL AUTOMATIC CELL
? R/3 ? Test connections login ? back ? replicate method ? active data R/3 Source system you will able to.
hope it helps u
Ramesh -
BEx Analyzer through SAP Netweaver ABAP trial version
Hi, I have installed SAP Netweaver ABAP trial version but dont know how to get BEx analyzer. Can someone help to find out that.
Thanks,Hi ,
I doubt if the BW component is present in the NW 7.0 Abap trial.Please check this in Tcode spam -> supp. package levels (all components are listed.there, or via system information in the gui menu.
When component BW is present you can install Bex/Wad etc. via the sapgui CD.
Check these links...
For setting up BI in NW 7.0 Abap Trial version :
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/bi/how%2bto%2bguides
For beginning your first BI model in NW 7.0 :
A beginner's guide to your first BI model in NW2004S
ABAP Trial Version for Newbies :
ABAP Trial Version for Newbies: Part 1 ' Download and installation of the Trial Version '
Installation & Implementation Documentation Center
SAP NetWeaver 7.0
https://websmp105.sap-ag.de/instguidesNW70
SAP NetWeaver7.0 (2004s) Installation & Implementation Documentation
https://websmp105.sap-ag.de/~sapidb/011000358700005431532005E.pdf
https://websmp105.sap-ag.de/installnw70
https://websmp105.sap-ag.de/~sapidb/011000358700005431552005E
Hope this helps,
Regards
CSM Reddy -
SAP NetWeaver 2004s Trial Version License Renewal
Hi,
How many times can I extend my license for SAP NetWeaver 2004s Trial Version?
Also, is there any fee for every license extension?
Thanks in advance,
HarisDear Haris,
Currently there's no limit and no fee for license renewals. In the past, license renewal had been stopped for some time though, which made a lot of people in this board very unhappy, but hopefully this won't happen again...
Best wishes,
Jan -
License key for "SAP NetWeaver 2004 - Trial Version on Linux"
I want to evaluate the software u201E SAP NetWeaver 2004 - Trial Version on Linuxu201C and i need a license-key for test drive.
Unfortunately I can not find a page where I can request a valid license for our test. I only find license keys for the u201E SAP NetWeaver 2004s - Trial Version on Linuxu201C.
Please can You help me?Hello
yu can download abap trail veriosn from this link
but u have to create a/c in dsn.sap.com
link is as below
https://www.sdn.sap.com/irj/sdn/nw-downloads
1)SAP NetWeaver 7.01 - ABAP Trial Version
2)SAP NetWeaver 7.0 (2004s) - Trial Version on Linux SAP Evaluation Software
3)SAP NetWeaver 2004 - Trial Version on Linux SAP Evaluation Software
that will hepl out 100 %
Regards
Jayesh -
Connecting SAP Netweaver ABAP Trial Version from 2 Laptops
Hi All,
I have a scenario where in I have installed SAP NetWeaver ABAP Trial 7.1 version on one Laptop. All the Presentation and application server are also installed on the same laptop and everything is working fine. Here NetWeaver is installed on Windows Vista.
Now, I would like to connect to SAP NetWeaver from another Laptop. In the other laptop i have Windows XP installed. I will install the SAP Front end and will supply all the application server details.
Is this approach proper or do i need to do something more to it?
It would be great if someone can provide some more information on this. I checked the Forum for this but as of now i couldn't find much resources or discussion on this.
Thanks and Regards,
Samantak.Hi Martin,
yes. It's true the SAP is still a client Server Application, but is SAP NW AS ABAP Trial version also supports - multiple systems?
If yes how does it do this? What are all the configuration settings required?
I have checked the SAP GUI for the main laptop where my NW AS is installed and found that the application server is configured as localhost. If there is no proper address of the application server then how to connect it with the system from another laptop?
Hope you got my point. But thanks for answering.
Waiting to hear more from you soon
Thanks,
Samantak. -
SAP NetWeaver Gateway Trial Version of Duet Enterprise
SAP NetWeaver Gateway Trail version Part 1 is not available for down load. I was successfully able to download Part 2 and Part 3 but Part 1 is not available. Can you someone help me with Part 1?
THanks.
Farhan.There lies another problem..
I tried downloading 7.01 from sdn.sap.com
The link for part2 of the file broke as many as three times
So I switched to ftp link.
But it happens to be 7.0
can I use any download manager with sdn.sap.com
If not, any alternate links..
Quick Reply appreciated -
SAP NetWeaver - ABAP Trial Version
Hi,
I tried to download any Version of the SAP NetWeaver Trial Version. But I couldn't download none Version.
The aim is to integrate our Output Management System into SAP BC-XOM.
Can anybody please help me with a link?
Regards
MichaelHello,
I found this link SAP NetWeaver Trial Version ABAP (Windows) - SAP Trial Versions - SCN Wiki
But is is pretty old. Only one option looks active - SAP NW 7.0 SP 12 for MaxDB.
Edited: Here are some more links to download hopefuly what you need:
Developer & Trial Editions: SAP Application Server ABAP and SAP Business Warehouse
SAP NetWeaver ABAP Trial 7.02 Win 64-bit Version (SP7 and SP9)
Kind regards -
Tell me the steps to install SAP NetWeaver 2004s Trial Version
Tell me the steps to install SAP NetWeaver 2004s Trial Version
Hi,
Check this link,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/77317c8d-0701-0010-f093-ed35a427f559
Cheers,
Darshna.
Maybe you are looking for
-
Hi, I buy new IPhone 4 (It is new for me),I try to download free app(by iTune), but i can't. iTune require me to review account, input Credit card bra bra ..., I don't have credit card(If i had, I wont give it to you, it is confidential), How should
-
Bring object to front on mouseover
Hello, Another simple question here. I have 2 objects next to each other. On mouseover I have them enlarge. I would like to make it so that whatever object is being enlarged is brought to the front. Here is my code. lowgaugefinished.addEventListe
-
How do i save a flow chart I created in pages into a pdf? i can't figure it out
-
Portal integration with OFA,OSA, Discoverer and Express
Dear All, Is it possible to integrate OFA,OSA, Discoverer and Express into portlet or is there any other mechanism to fulfill those requirements? null
-
Hi gurus, We have created an integration scenario with 3 services. We've created an ABAP and JAVA Dynpros in order to consume them. Everything runs OK and the entire runtime is 10 seconds. We've generated a BPM to orchestrate it's execution (this BPM