Using SWF Loader
Hi Gurus,
I have been looking through other questions like this, and not sure if the resolutions that I have seen will work. I have a dashboard that I want to use the SWF loader in to bring in SWF files (obviously) but they are not stored in InfoView - which is what has been talked about in other questions.
I have looked in the user guide and have seen that I can use DocumentDownload or OpenDoc, not that I am familiar with either. My question really is this:
1. could i use one or other of these even though i am not going through infoview (so i dont have a cuid)
2. how would I write the syntax?
I tried using a URL button, but I have a container on the main summary dashboard that I want the swf's to load in, rather than have a new screen load up.
Could someone give me some advice on this??
Many thanks,
Sarah
Hi Roman,
Thanks for the response,
I got that point that i cannot use SWF loader to show my Sub Dashboard inside my main dashboard.
So my question What is the way (Working) to show the sub dashboard inside the main dashboard using the BICS(On EP).
I have tried to published my Sub Dashboard and Main Dashboard on EP and tried to call the Sub Dashboard using the HTML Link...(SWF Loader/Slide Show)...but these comp. wont work...
so which way i shd go..
Are you saying i shd go via "Web Application Designer--creating the template and calling Dashboards(main n Sub) seperately???
Sam...
Edited by: Sapbpc_user on Dec 1, 2010 12:57 PM
Similar Messages
-
When i try to run the mxml individually, It run correctly. As soon as i include it in another mxml using SWFLoader , the components stop working properly. It reflects the data sometime while sometime it doesnt. If i press browser refresh button , the components starts working
again.
here is the code snippet for the mxml where i load another swf file using swf loader.
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
xmlns:views="com.views.*" viewSourceURL="srcview/index.html" styleName="AppBack" height="100%" width="100%" initialize="init()" layout="vertical">
<mx:Style source="assets/css/Main.css" />
<mx:TabNavigator id="tn" height="100%" width="100%" top="-1" right="0" left="0" paddingTop="0" >
<mx:Canvas label="Home" paddingTop="0" paddingLeft="0" paddingRight="0" paddingBottom="0">
<mx:SWFLoader id="loader0" source="AddDeleteAccess.swf" height="100%" width="100%" x="0" y="-15"/>
</mx:Canvas>
</mx:TabNavigator>
</mx:Application>
The Home.swf contains a conbo box and a datagrid.
The combo box stops working sometime and after the browser refresh is click it starts working.
if required i can also paste the code of the file which is being loaded.scale your loader so it fits the way you want. ie, if your loaded swf is 800x600 (with nothing on the back-stage) and you're loading into a 350x375 swf, after loading is complete, use:
loader.width *= 350/800;
loader.height *= 375/600; -
SWF loader need to load 100% width and height
Hi,
I have using dashboard in my application.In which the flex pages are loaded using SWF loader. the swf is not loading 100% when i minimize the browser. actually its loading 100% when the browser is full screen mode. suppose the browser is opened in 75% the swf also gets loaded based on the browser size. but after maxmizing the browser the SWF its not expaned to the actuall size of the browser. could you anybody help me plz..?
Thanks & Regards
MuthuHi,
I have used this code to load the swf in the main application:
<mx:Canvas id="dashCanvas" creationPolicy="all" cachePolicy="on" width="100%" backgroundColor="#FFFFFF" horizontalScrollPolicy="off" verticalScrollPolicy="off" >
<mx:SWFLoader id="dashBoard" trustContent="true" width="100%" height="100%" scaleContent="true" autoLoad="true"
source="@Embed(source='../../../../assets/appl/dashboard/dashboard.swf')" />
</mx:Canvas>
And i have set width and height as 100% in <mx:Appilcation> .
Thanks and egards
Muthu -
Tab navigator and swf loader issue
I have written two flex applications. Each of the
applications contains a tab navigator control. The direct children
of this tab navigator are canvases, sized to max.
i.e.
<mx:Canvas label="WhateverLabel" width="100%"
height="100%">
<!--whatever additional children here-->
</mx:Canvas>
Everything works fine, the navigator, all its children and
grandchildren Application does exaclty as it should ... untill I
load it into another application using swf loader.
Our main application is a menu driven app that loads
individual swf files based on user selection. When either one of
these programs (using the tab navigator described above) is loaded,
I get a White Bar across the top of the screen, sized as the Tab
navigator width.
the white bar goes away as soon as the user interacts with
any control, but it still is there on application load. Here is a
picture of what I am speaking about.
http://members.cox.net/dragon.magik/whitebar.jpg
You can see the menu atop the screen as the base application.
You can then see the panel right beneath it, that is the main panel
of the application i am having problems with. The white bar, as you
see, is as wide as my tab navigator. The TN labels are positioned
correctly, but I don't know why I am getting the white bar. I am
having the exact same problem with tab navigators in two different
applications I load into this one control panel. Any help would be
greatly appreciated. Thanks in advance.There is an unsolved bug in adobe.
You have to solve it manually overriding the function:
package
import mx.containers.TabNavigator;
public class TabNavigatorFixed extends TabNavigator
public function TabNavigatorFixed()
super();
override protected function commitSelectedIndex(newIndex:int):void
super.commitSelectedIndex(newIndex);
if(tabBar.numChildren > 0){
// Select the corresponding Tab in the Tab Bar (this fixes a bug in Flex)
tabBar.selectedIndex = newIndex; -
SWF Loader using OpenDoc links
I am having no luck using an opendoc link inside the SWF loader. Any suggestions?
Is my other choice to load the swf from a network location? I am able to load successfully that way (even run the data connections)
I've tried different variations of this link and all I get is the 100% screen, with no dashboard -
-SERVER-//OpenDocument/opendoc/openDocument.jsp?&iDocID=ARmopxdsSohMvuPJL67dARE&sIDType=CUID&sType=Flash
Xcelsius SP3, trying to load other xcelsius swf files already in infoview.
Thank youHi,
I tried using the links provided
It gives me the below exception:
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
java.lang.NullPointerException
com.businessobjects.clientaction.xcelsius.DocumentDownload.getSWFbyName(DocumentDownload.java:110)
com.businessobjects.clientaction.xcelsius.DocumentDownload.service(DocumentDownload.java:149)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
Is there any modification required on the server side to run the DocumentDownload syntax.
I am able to view the swf using the opendoc syntax.
Help is appreciated.
Have breaking my head and reading so many forums and post for weeks. banghead.gif
Link which is working using opendoc:
https://ServerName/OpenDocument/opendoc/openDocument.jsp?sDocName=TestFile&sKind=Flash&iDocID=144902
Please help me with the link for using Documentdownload
Documentdownload link - not working:
https://ServerName/OpenDocument/opendoc/&sPath=[My Favorites]&downloadDocument?iDocID=XXXX&sKind= Flash
Also please let me know if documentdownload link would take me to the login page if the CELOGONTOKEN is not appended.
Note: I am able to get the CELOGONTOKEN successfull -
Use loadSWF load my stage3D game swf and show In AIR , This swf may crash when running
Problem Description:
use loadSWF load my stage3D game swf and show , This swf may crash when running
Steps to Reproduce:
run my Upload Project . Fill in the login box, any account and password . Because of network problems, you may need to wait a long time to show up login box
Actual Result:
this swf crash when running
Expected Result:
this swf do not crash when running
Any Workarounds:
Test Configuration
My Hardware and Environment details:
1.this url's swf load files in worker
2.this url's swf use SDK is Flex 4.6.0(bulid23201)
3.this url's swf is Flex Project
Upload Project Url:
http://fight.fuhuodao.com/fight/testUrl/!FightAirShell.zipThe loading of SWFs from AIR has a different Security model than that of the WebPlayer. There is a workaround to loading plugins in AIR: If you use a static plugin this should work for you. To do this: Link in the plugin at compile time, and pass the PluginInfoResource to the loadPlugin() method.
-
Loading and Unloading of swf files in SWF Loader
Hi all,
I have a doubt reg. SWF Loader.
I have created two mxml files A & B.
A. local.mxml
B. SwfSample.mxml
i have two labels and a button in A file and i have set values to those labels and have a method to handle the click event of the button. In B file i have loaded this A file and accessed the labels and methods using SystemManager Component and changed the values of the A file's label and accessed data from A file to B file.
Here comes the problem,
I have two buttons named LoadAgain and Unload
When i click the Unload button, the SWF Loader unloads its content by the method i handled for the Unload button, after that i have clicked on the LoadAgain button to load the same content of A's mxml to the SWF Loader, it loads succesfully,but i was not able to access its Label or Method from the B mxml. Please help me to solve the issue.
local.mxml
<?xml version="1.0" encoding="utf-8"?><mx:Application
xmlns:mx=http://www.adobe.com/2006/mxml layout="absolute">
<mx:Script>
<![CDATA[
Bindable]
public var varOne:String = "This is a public variable";
public function setVarOne(newText:String):void
varOne = newText;
]]>
</mx:Script>
<mx:Label id="lblOne" text="I am here" x="28" y="88"/>
<mx:Label text="{varOne}" x="166" y="88"/>
<mx:Button label="Nested Button" click="setVarOne('Nested Button Pressed');" x="28" y="114"/>
SwfSample.mxml
<?xml version="1.0" encoding="utf-8"?>
<mx:Application
xmlns:mx=http://www.adobe.com/2006/mxml layout="absolute">
<mx:Script>
<![CDATA[
import mx.controls.Alert;
import mx.managers.SystemManager;
import mx.controls.Label;
Bindable]
public var loadedSM:SystemManager;
private function initNestedAppProps():void
loadedSM = SystemManager(myLoader.content);
public function updateLabel():void
lbl.text = loadedSM.application[
"lblOne"].text;
public function updateNestedLabels():void
loadedSM.application[
"lblOne"].text = "I was just updated" ;
loadedSM.application[
"varOne"] = "I was just updated";
public function updateNestedVarOne():void
local(loadedSM.application).setVarOne(
"Updated varOne");
public function unload():void
myLoader.content.loaderInfo.loader.unload();
public function loadAgain():void
myLoader.load(
"../bin-debug/local.swf");
]]>
</mx:Script>
<mx:Label id="lbl" x="72" y="47"/>
<mx:SWFLoader id="myLoader" width="438" source="../bin-debug/local.swf" creationComplete="initNestedAppProps();" y="73" height="238" x="72" alpha="1.0"/>
<mx:Button label="Update Label Control in Outer Application" click="updateLabel();" x="72" y="319"/>
<mx:Button label="Update Nested Controls" click="updateNestedLabels();" x="72" y="349"/>
<mx:Button label="Update Nested varOne" click="updateNestedVarOne();" x="72" y="379"/>
<mx:Button label="Unload" click="unload();" x="72" y="409"/>
<mx:Button label="Load Again" click="loadAgain();" x="72" y="439"/>
</mx:Application>
Thanks & regards,
Sathish.KcreationComplete only fires once when the SWFLoader is created. Therefore you never reset your variables to point to the new sub-app. On a slow network, creationComplete may fire before the sub-app loads. It is best to use the COMPLETE event.
Alex Harui
Flex SDK Developer
Adobe Systems Inc.
Blog: http://blogs.adobe.com/aharui -
Change the SWF loading text for a single presentation
This question was posted in response to the following article: http://help.adobe.com/en_US/Presenter/7.0/WS8815BC0A-5D22-4f29-87B9-D9047B5B57E4.html
Hi,
I have Adobe Presenter 7.0.5, in which with recently updating to 7.0.7 version.
When I tried the fix of this "Change the SWF loading text for a single presentation" workaround fix, I passed to have the error:ReferenceError: Error #1069: Property ADOBE_PRESENTER not found on Pool_P75.Resource.UIText
But before this error comes, I see that the loading text is changes from the original 2Adobe Presenter" to the one defined by me on the UIText, as the fix said.
And what's happen is that the scrren with the loading text is not being changed by the learning first slide....
Is there any workaround to correct that error?
Many thanks in advance for any feedback from the adobe support team or from any other colleagues that are using Adobe Presenter (;-)). -
Loading external SWF's into an SWF Loader as3 style?
Hi,
I've recently made the switch from as2 to as3 and am still struggling to get my head around one aspect in particular. I've managed to load one external swf into a blank file via the script
import LoadDisplayObject;
var loader:LoadDisplayObject = new LoadDisplayObject("button_01.swf", true);
loader.addEventListener("displayObjectLoaded", onComplete, false, 0, true);
addChild(loader);
function onComplete(evt:Event):void {
trace("loaded complete received");
loader.scaleX = loader.scaleY = .75;
.....however I'm struggling with the script to make a swfs load into a space when one of my 3 buttons is clicked....
My page currently has three buttons (button_01, button_02 and button_03) and in a local folder three separate swfs with the same names which I wish to load in, when the appropriate button is pressed.
I have managed to get them to load in using a tutorial...however they load over the top of each over...far from ideal. From research on the internet I've found a range of different script...but I just can’t find anywhere I can find script to make this work..hence why I have turned to here.
Any help much appreciated...thanks in advance.Hi,
Just throught I would let you know that I've manged to get this to work this morning. Changed the script slightly and used a different method of:
var home:MovieClip = this;
function butt1Click(evt:MouseEvent):void {
var ldr:Loader = new Loader();
ldr.load(new URLRequest("button_01.swf"));
ldr.contentLoaderInfo.addEventListener(Event.INIT, loaded);
function butt2Click(evt:MouseEvent):void {
var ldr:Loader = new Loader();
ldr.load(new URLRequest("button_02.swf"));
ldr.contentLoaderInfo.addEventListener(Event.INIT, loaded);
function butt3Click(evt:MouseEvent):void {
var ldr:Loader = new Loader();
ldr.load(new URLRequest("button_03.swf"));
ldr.contentLoaderInfo.addEventListener(Event.INIT, loaded);
function loaded(evt: Event):void {
if(contentClip.numChildren > 0){
contentClip.removeChildAt(0);
contentClip.addChild(evt.target.content);
button_01.addEventListener(MouseEvent.MOUSE_UP, butt1Click);
button_02.addEventListener(MouseEvent.MOUSE_UP, butt2Click);
button_03.addEventListener(MouseEvent.MOUSE_UP, butt3Click);
seems to work well. Only small question is if I want one page to load automatically upon opening...how do I alter the script to do this??? Thanks -
Xcelsius Parent/Child SWF Loader with BICS Connections
We have several Xcelsius Dashboards that use BICS connections to retrieve data from BW queries that we'd like to combine into one Parent/Child tabbed dashboard. I can't seem to find solid information on if this is possible using a SWF Loader component due to the BICS requirement of being published through BW Portal and not InfoView. Does anyone have any ideas (short of combining them into one huge dashboard due to the volume of data)? Thanks!
Hi Chris,
I have been working with SWF loader on the SAP portal using the BICS connection type. It was not supported last time I asked about a year ago. However, it can work if you specify the URL in the SWF loader in this way:
http://sapwebdisp.vestas.net:8103/bicsremotebex?SWF=XXX&TIMESTMP=1318867468000
XXX is the name you publish your child dashboard under. Data can be exchanged between the parent and child dashboard by using the custom component "Data sharer" from Inovista which can be downloaded for free:
http://www.inovista.com
Besides the fact that this setup is unsupported there are some limitations so from my point of view it should only be applied under the following conditions:
1. It is not possible to build eveything into a single dashboard.
2. A solution having several independent dashboards does not make sense.
An alternative might be the setup described in note 1526291. The way I understand it, it binds the dashboards together in a similar way as on a BO server with flash variables.
Regards,
Michael -
How can I control stage position for swfs loaded by Loader class?
I'm creating a grid of buttons that, when clicked, will load a specific swf and I'd like for each swf to play in a certain portion of the stage. When I use the Loader class:
var my_loader:Loader = new Loader();
my_loader.load(new URLRequest("abc.swf"));
addChild(my_loader);
the swf always displays at top left. Is this an attribute of the individual swfs that I'm loading, or can I address the position in the main movie?
Thanks-
SeanaddChild(my_loader);
my_loader.x = 500;
my_loader.y = 250; -
It looks like I may have found a bug in the swf loader. Before I submit this problem I want to make sure there is not something I'm missing in my code. I wrote this class to load a tutorial when the user first launches a sub application in a project I'm working on. This is a simplified version of the class that exemplifies the problem. The same methods I use to launch the swf from within an mxml work just fine, but when I externalize the process in this class, I can hear the tutorial, but I get no visual. Is this a bug or am I missing something?
Here is the tutorial launcher class:
package proj.fuego.utils
import flash.events.Event;
import mx.controls.SWFLoader;
import mx.flash.UIMovieClip;
public class TutPlayerSimple extends UIMovieClip
private var gutLoader:SWFLoader;
public function TutPlayerSimple(fullTutorialPath:String)
gutLoader = new SWFLoader();
gutLoader.addEventListener(Event.COMPLETE, addToStage);
gutLoader.load(fullTutorialPath + ".swf");
//addChild(gutLoader);
private function addToStage(evt:Event):void
addChild(evt.target.content);
This is my mxml:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" minWidth="1024" minHeight="768" applicationComplete="application1_applicationCompleteHandler(event)">
<mx:Script>
<![CDATA[
import mx.controls.SWFLoader;
import mx.events.FlexEvent;
import proj.fuego.utils.TutPlayerSimple;
private var fullTutorialPath:String = "ll_tut";
private var tutPlayer:TutPlayerSimple;
protected function application1_applicationCompleteHandler(event:FlexEvent):void
// TODO Auto-generated method stub
var context:LoaderContext = new LoaderContext();
tutPlayer = new TutPlayerSimple(fullTutorialPath);
//context.checkPolicyFile = true;
//gutLoader.loaderContext = context;
trace("Loading Tut:", fullTutorialPath + ".swf");
addChild(tutPlayer);
]]>
</mx:Script>
</mx:Application>That didn't look right. You'll need to addChild SWFLoader. Not sure what will happen if you just try to add its content. There might also be issues putting Flex components inside a UIMovieCip.
Alex Harui
Flex SDK Developer
Adobe Systems Inc.
Blog: http://blogs.adobe.com/aharui -
Cross-domain SWF loading doesn't work
I've been trying to get cross-domain SWF loading to work for
a while now, but even though it works from the Flash IDE the loaded
SWF is blank when I upload it to a webserver somewhere. And yes,
both servers have a crossdomain.xml file in their root folder, and
I've also used System.security.allowDomain("*"). I've published
both using the 'using network' option in the publish dialog.
Could someone please help me with this, as I can't seem to
find why it isn't loading. I've also read the entire PDF about
Flash 9 security, but I couldn't find anything about external SWF
loading except for the crossdomain files.A little more color on this: If there are 2 or more messages in the active mailbox (and others in a different mailbox), the expand/collapse function works for the messages in the active mailbox. In the message column on the right, all the messages in the conversation are shown (both mailboxes). Only those messages in the active box are shown in the list column when the conversation is expanded. I can kind of see how this might be intentional, but it's strange to see lots of messages in the conversation in the right column, but only one or a few corresponding items in the messge list.
-
AS2 SWF loaded inside a AS3 SWF
Hi,
In a recent project I had to load a FlashPaper2 document
inside a SWF implemented in AS3. I read a couple of articles about
Darron
Shcall's article and
FlashInterface
but none of them seemed to be useful in my case.
I needed to load a FlashPaper SWF inside a AS3 and couldn't
rely on ExternalInterface since they were not two separate SWF's.
To be more clear, I was using the Loader class via a Sprite to load
the FlashPaper SWF.
Anyways, I created FlashPaperLoader.SWF implemented in AS2
which was used to load the FlashPaper SWF. This loader was able to
communicate with the FlashPaper APIs (AS2). As you can guess, the
AS3 SWF was used to load the FlashPaperLoader.swf.
What I don't understand is how come the FlashPaperLoader the
FlashPaper document SWFs can communicate with each other thru AS2
function calls when they are loaded inside a AS3 SWF, I thought
that due to VM differences, no communication is possible!
I hope I was clear, if I was, any guru insight is really
appreciated.
Cheers.Thanks kglad,
But you still haven't answered my question. I am not looking
for solutions, my own solution works. I wanted to understand more
about the VM's.
AS3
var request:URLRequest = new
URLRequest("./FlashPaperLoader.swf");
var loader:Loader = new Loader();
loader.load(request);
AS2
var loader:MovieClipLoader = new MovieClipLoader();
loader.loadClip("./FlashPaperDoc.swf", fpContainer);
// the loader SWF used IFlashPaper APIs to communicate with
the FlashPaper SWF.
Now, the first part (AS3), all that code is interpreted by
VM2. Once an AS2 SWF is loaded a
AVM1Movie
is created and no direct communication between AS3 and AS2 is
possible. I am curious to know how come the two AS2 SWFs can
communicate with each other while inside the VM2 space. -
Issues using multiple load-config files with ant
Hello,
Not sure if this is the correct place...
I am creating an ant build script to compile our flex application. I am trying to use the default flex-config by doing <load-config filename="${flex.sdkPath}/frameworks/flex-config.xml"/> and project specific config file add the datavisualization module and any other libraries we might need in the future. I am trying to do this as I don't want to modify the flex-config.xml
The issue I keep running into is I get a compiler error saying "unable to locate specified base class 'spark.comonents.application..". if I place the custome load-config file above the adobe default flex-config it gives errors stating it the "SeriesSlide" type
<mxmlc file="${project.sourcePath}/FBApp.mxml"
output="${project.output.binaryPath}/${project.output.fileName}.swf"
locale="en_US"
static-link-runtime-shared-libraries="false"
static-rsls="false"
use-network="true"
accessible="false"
debug="true">
<load-config filename="${flex.sdkPath}/frameworks/flex-config.xml"/>
<load-config filename="C:/Hudson/.hudson/jobs/FB 2.0 Flex/workspace/FBApp/FB-config.xml"/>
<source-path path-element="${flex.sdkPath}/frameworks/libs"/>
<source-path path-element="${project.sourcePath}"/>
<library-path dir="${flex.path}/sdks/${flex.sdkVersion}/frameworks/locale/en_US"
includes="*"/>
<library-path dir="${project.libraryPath}"
includes="*"/>
<keep-as3-metadata name="Protected"/>
</mxmlc>
the following is my FB-config.xml
<?xml version="1.0"?>
<flex-config>
<runtime-shared-library-path>
<path-element>C:\Program Files\Adobe\Adobe Flash Builder 4 Plug-in\sdks\4.1.0\frameworks\libs/datavisualization.swc</path-element>
<rsl-url>http://fpdownload.adobe.com/pub/swz/flex/4.1.0.16076/datavisualization_4.1.0.16076.swz</rsl-url>
<policy-file-url>http://fpdownload.adobe.com/pub/swz/crossdomain.xml</policy-file-url>
<rsl-url>datavisualization_4.1.0.16076.swz</rsl-url>
<policy-file-url>.</policy-file-url>
</runtime-shared-library-path>
</flex-config>
It seems to be that the first "load-config" ant runs into is the only one that gets used. When looking around the internet I have multiple cases of where people say they have successfully used multiple load-config files.
This one in particular.
http://flashdevelop.org/community/viewtopic.php?f=13&t=5629&view=previous
If I had to guess on what was wrong I believe my FB-config.xml file is incorrect but I can't find an example of anyones custom configuration file.
Any guidance would be apprecaited.I am embarrassed to say that your solution answered my question.
I was about 10 min away from rewriting my Ant script to just use the mxmlc.exe directly instead of the mxmlc ant tag. I kept running into the -flex-config+=YourConfig.xml for the command line option but never saw the xml variant.
http://blog.flexexamples.com/2008/12/21/using-a-custom-flex-configxml-file-in-flex-builder -3/
http://livedocs.adobe.com/flex/3/html/help.html?content=configuring_environment_3.html
Does Flex have any documenation that shows all the different tags that are available like the Ant documenation?
http://ant.apache.org/manual/Tasks/delete.html
Thanks at ton.
Maybe you are looking for
-
Safari Hijacked and Certificates that won't go away. Malware?
Four times over the last 4 or 5 months "something" hijacks Safari and freezes it. The first 3 times I was in Google. I clicked on a site, it would freeze Safari and I would get a message from an unrelated website telling me to call a number for App
-
After installing Hyper-V on Windows 8.1 Pro, my computer won't boot
I have a somewhat new (June 2013) HP laptop originally running Windows 8 Pro. I installed the Hyper-V component right away and it was running great. After testing Windows 8.1 Pro on another computer a couple months ago, I decided to upgrade my HP lap
-
Service charges also to be load on same material
Material Net Qty Rate MAtrl Coating Total Amt Total per Charge per MAtrl Coating ABC 400 23.06 9.88 92
-
Create Screen Capture / Video Capture / Screencast using Flex?
Hi there, Has there been any update to this conversation: http://forums.adobe.com/thread/420807 That is, is there any way to record the desktop using Flex? Thanks, Mike
-
R/3 Extraction taking too long to load data into BW
HI There, I'm trying to extract SAP Standard extractor 0FI_AP_4 into BW, and its taking endless time. Even the Extract checker RSA3 is taking too long to execute the data. Dont know why its taking so long to execute. Since there in not much data to