Using Terminal to compile Freetype, FontForge, and Wine (NOT DARWINE)

Hey there.. Im trying to build FreeType, FontForge, and Wine from source to install on my Mac. Ive downloaded the tar.bz2 files of each and unarchived them using archive manager. I have very little compiling experience.. I did alittle bit of it on Arch Linux using ABS, the Arch Build System, and compiled maybe one driver on Ubuntu 8.10.. how would I go about installing these packages?

No problem here. Did you forget it's sudo port install fontforge ?
sudo port install fontforge
---> Fetching giflib
---> Attempting to fetch giflib-4.1.6.tar.bz2 from http://internap.dl.sourceforge.net/giflib
---> Verifying checksum(s) for giflib
---> Extracting giflib
---> Applying patches to giflib
---> Configuring giflib
---> Building giflib
---> Staging giflib into destroot
---> Installing giflib @4.1.6_0
---> Activating giflib @4.1.6_0
---> Cleaning giflib
---> Fetching libuninameslist
---> Attempting to fetch libuninameslist-20080409.tar.bz2 from http://internap.dl.sourceforge.net/libuninameslist
---> Verifying checksum(s) for libuninameslist
---> Extracting libuninameslist
---> Configuring libuninameslist
---> Building libuninameslist
---> Staging libuninameslist into destroot
---> Installing libuninameslist @20080409_0
---> Activating libuninameslist @20080409_0
---> Cleaning libuninameslist
---> Fetching libxml2
---> Attempting to fetch libxml2-2.7.2.tar.gz from ftp://ftp.cse.buffalo.edu/pub/Gnome/sources/libxml2/2.7/
---> Attempting to fetch libxml2-2.7.2.tar.gz from http://ftp.linux.org.uk/mirrors/ftp.gnome.org/sources/libxml2/2.7/
---> Attempting to fetch libxml2-2.7.2.tar.gz from http://distfiles.macports.org/libxml2
---> Verifying checksum(s) for libxml2
---> Extracting libxml2
---> Configuring libxml2
---> Building libxml2
---> Staging libxml2 into destroot
---> Installing libxml2 @2.7.21+darwin9
---> Activating libxml2 @2.7.21+darwin9
---> Cleaning libxml2
---> Fetching tiff
---> Attempting to fetch tiff-3.8.2.tar.gz from ftp://ftp5.freebsd.org/pub/FreeBSD/ports/distfiles/
---> Verifying checksum(s) for tiff
---> Extracting tiff
---> Configuring tiff
---> Building tiff
---> Staging tiff into destroot
---> Installing tiff @3.8.22darwin9macosx
---> Activating tiff @3.8.22darwin9macosx
---> Cleaning tiff
---> Fetching fontforge
---> Attempting to fetch fontforge_full-20080927.tar.bz2 from http://internap.dl.sourceforge.net/fontforge
---> Attempting to fetch cidmaps.tgz from http://fontforge.sourceforge.net/
---> Attempting to fetch fontforge_htdocs-20080927.tar.bz2 from http://internap.dl.sourceforge.net/fontforge
---> Verifying checksum(s) for fontforge
---> Extracting fontforge
---> Applying patches to fontforge
---> Configuring fontforge
---> Building fontforge
---> Staging fontforge into destroot
---> Installing fontforge @20080927_0
---> Activating fontforge @20080927_0
---> Cleaning fontforge

Similar Messages

HT4285 i have been using my mac book pro for almost an year..My use is pretty safe as i use it only at my home and do not carry it at office... my sues is shall i consider the APPLECARE PLAN....the plan is almost 20% of the laptops cost.

i have been using my mac book pro for more than 11 months.
.My use is pretty safe as i use it only at my home and do not carry it to office...
my confusion is that shall i consider the APPLECARE PLAN....the plan is almost 20% of the laptops cost....Will spending so much money be worth it

Like any other insurance, it's only worth it if you have a problem. I've purchased it on my "high risk" Macs and not purchased on the others. So far I've never needed it.

Hi.. I received my Iphone today. It has tiny scratches at the corners. ALSO, i cannot hear anything, have to use headphone. Siri works slow and does not speaks!!

Hi.. I received my Iphone today. It has tiny scratches at the corners. ALSO, i cannot hear anything, have to use headphone. Siri works slow and does not speaks!! Anyone with same problems? What can i do now?

What if they say i scratched it by dropping or something (which i obviously dint)? will they still replace it?
It even has the plastic on it yet..!!

TS4002 Can you tell me if the smtp settings have changed recently? I use me/ICloud mail with Outlook and can not receive emails but outgoing emails are no longer working. Error message is: Authentication failed because Outlook doesn't support any of the

I am able to receive messages on my IMac using Outlook but am unable to send. I've had no trouble in the past but began receiving the following messages today.
5.7.8 Bad username or password (Authentication failed).
Authentication failed because Outlook doesn't support any of the available authentication methods.
I am able to send messages using this account on my IPhone and IPad so the IMac is the only place I am having issues. Any advice?

Here are the correct settings. They have never changed since iCloud debuted a year ago.
Server information
IMAP (Incoming Mail Server) information:
Server name: imap.mail.me.com
SSL Required: Yes
Port: 993
Username: [email protected] (use your @me.com address from your iCloud account)
Password: Your iCloud password
SMTP (outgoing mail server) information:
Server name: smtp.mail.me.com
SSL Required: Yes
Port: 587
SMTP Authentication Required: Yes
Username: [email protected] (use your @me.com address from your iCloud account)
Password: Your iCloud password
Note: If you receive errors using SSL, try using TLS instead. SSL is required for both IMAP and SMTP connection with iCloud. POP is not supported by iCloud.

Can i use a GCC compiler on MacOSX and link this C Code to lbv 6.1 on OS9?

I am interested in compiling my C code on the free GCC compiler which works with Mac OS X but am concerned that I will not be able to connect this with the Call library function and CINs in labview 6.1 that runs on Mac OS 9. Am I able to cross platforms and use the .so file with lbv 6.1 on OS 9? What problems will i most likely encounter or should watch out for? Thanks!

Unfortunately, you cannot port shared objects across these platforms. You are going to have to recompile the .so file on OS 9 for use in the call library function node.
Robert Mortensen
Software Engineer
National Instruments

Using Lightroom with HP B9180 printer and WIN Vista

Does anyone have experience using Lightroom with the HP 9180 pigment printer and Windows Vista? I'm considering moving from a dye printer to a pigment printer but have noted in discussion groups there seem to be some difficulties of getting good prints out of Lightroom with various printers.

Using Vista with B9180 via Ethernet, works great! If you upgrade the B9180 firmware, do it via USB.

HT5622 I want to use free apps on my Ipad and do NOT wish to submit a credit card to Itunes. My Apple Id works, but won't let me migrate past the credit card phase in itunes. I don't wish to sumbit or use a credit card because I will not make purchases.

I want to use free apps on Ipad 2, but it continually asks me to submit a credit card in Itunes. I do not wish to purchase anything apps or music. I am only interested in free apps. If I were to make purchases, I would use a prepaid card like an itunes card or an app card, but NEVER a credit card. I can't seem to bypass this option of using a credit card and need to. I have another Ipad 4 and have never needed to use my credit card to migrate past itunes to use any apps. How do I get past this credit card request and still use my ipad 2. According to my Ipad 2, if I don't plug in a credit card, I can't even use free apps which is stupid.

You can create an iTune and App Store account without credit card details
1. Sign out of current Apple ID if you are sign-in to one (important)
2. Go to App Store and select a free app
3. Tap INSTALL APP
4. Create New Apple ID
5. Confirm Your Country
6. Agree with Terms and Conditions
7. Fill in your Apple ID and Password (you must create a new Apple ID; don't use your old Apple ID)
8. Create and answer your secret question
9. Select NONE for Payment Method
10. Fill in Billing Address
11. Submit application for new Apple ID
12. Wait for verification email
13. When email arrive, verify your account
14. Start downloading your free apps

Using one library for multiple computers and accounts (not store accounts)

Okay, we currently have four macs in the house. One was recently bought: i7 iMac (late 2009), another is dying: (mid 2005 iMac), another is going somewhere else: (late 2006 iMac) and another is a laptop: C2D MBP (late 2008). We might add another computer into the mix some time later.
Anyway, what I want to do is have one iTunes library which all of the computers can access (even guest's/friend's computers). We have a Time Capsule, and as I have heard one can make the TC the HDD for the iTunes library, I thought it best for it to be there.
The only thing is, how can each computer (and the possible multiple accounts) each access the same library, without duplicating and messing anything up? Is that possible? If it is too hard for multiple computers to do this, I would still want the (late 2009) iMac to be able to use the same library for the two accounts on it.
Thanks.

Make sure everything you want to share is on the centralized drive (music, video, and books, but if any of you have mobile devices, keep the apps on your local drive). Mount the drive on your computer. (Remember, from now on you must do this before starting iTunes.) If iTunes isn't running, start it now.
At the moment iTunes thinks the library is on the local computer and has all the music on it so that has to be changed. Click on Music in the left window pane, select all, and delete. This deletes all the music from the library and, if you choose, from the computer too. (Until you are sure this set-up is to your liking, don't delete the music from the drive.) Now go to Preferences and select the Advanced tab. Set iTunes to look at the music folder on your shared drive. And finally, select File>Add to Library to repopulate your iTunes library. This could take a while if you have a large music collection.
Since you changed the music location, anything that is added to one person's library will be saved onto the shared drive so it isn't too much of a hassle to manually add music. You'll have to rebuild playlists which is a minor hassle but it’s a one time deal.

I get Blackberry 9800 and using last 18 months.Now lock and unlock not working I am in India No chance to repair in India since get out side

I am using blckberry 9800 for the last 18 months.Now it is not woring lock and unlock .I contact all dealers in India and they told they are unable to service and repair since I purchased from out side India.I purchased from Dubai .What shall I do please

No matter where you purchased it, it's beyond the one-year warranty. To repair it would probably cost more than it would to replace it with a new phone (even if it's a used phone and new to you).
I hope that helps you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

What is the use of have 3 Class loaders and why not only one

In java we have 3 class loaders i.e BootStrap loader, Extension loader and System loader. Why can't we have just one?
And what is the user of Extension loader?

user7041221 wrote:
In java we have 3 class loaders i.e BootStrap loader, Extension loader and System loader. Why can't we have just one?
And what is the user of Extension loader?This has to do with one of the most advantages of OOP, reusability.
First comes the Bootstrap class loader, it loads the classes contained in java.lang
Next comes the Extention classloader, which loads vendor specific classes, like in case of SUN jvm the extention classloader will load the jars contained
in /jre/lib/ext, that is why if you place any jar file in this directory, it will automatically be loaded at runtime. Suppose you place log4j.jar in this directory in this directory, now if you check the classpath[if you use eclipse, it is very easy to find out],log4j jar willl be there, you will now not have to explicitly add the jar in the classpath again. If any other vendor supplies JVM ,he/she will place their vendor specific classes in this directory.
Last but not the least, the system classloader, it loads the classes in your application, example can be, when you use jdbc and do this :
Class.forName("")
system classloader is loading the class for you, there are two types: static and dynamic class loading.
Now all these classloader follow the same rule, first it asks its parent classloader to load a class for it, system classloader will ask the extention classloader
to load a class when needed, and if the extention classloader has already loaded the class, that class will not be loaded again. If the class could not be loaded by ext class loader, the the system classloader tries to load it. Relation between ext and bootstrap class loader is same. If the class not found ClassNotFoundException is thrown..
For more details..check the specification.

I've lost my phone and I've tried using 'Find My iPhone' on iCloud and its not working?

I lost my iphone lastnight and I've tried using the Find my Iphone app on icloud but it just says 'no devices'

Did you set it up on your iPhone prior to it being lost? If not, then it wont find it. Otherwise it requires the iPhone to be powered on and have an internet connection and location services turned on to be found. If somebody restored it via itunes or the settings menu, then your account info is no longer on the phone and it'll be impossible to use "find my iPhone" to find it.

Trying to use a lebara sim for internet and its not working

Ive just come over to spain and i was told that it would be best for me to get a lebara sim card so i could use the internet whilst here. However, its just not working properly, i can get imessages and whatsapp messages however its just not downloading it properly.
Ive rang lebara and ive got their settings in my phone but still no luck, Ive reset my phone a couple of times and still nothing... Lebara has just told me to contact apple!
I was wondering if anyone could help?!

Hi,
Please check if there is Event ID 9017 and 9018 in the application log, make sure the MRM works well.
Please make sure the Microsoft Exchange Mailbox Assistants service is working well.
And you can increase the diagnostic logging level for the MRM, then you can monitor the events in the application log.
Best regards,
Belinda Ma
TechNet Community Support

When I try to use photomerg, error 19 comes up and will not let me do it. Help!

Im not sure what to do, I can not do any photomerging anymore.

Hi there! Because the forum you originally posted in is for beginners trying to learn the basics of Photoshop, I moved your question to the Photoshop General Discussion forum, where you'll get more specialized help.
To help others help you, please read through this article and provide any additional relevant details.

My employer uses website compatible with 3.06 and will not work with ver.5. how to run compatibility mode on ver. 5 ?

Is it possible to run this kind of websites with Firefox ver.5 ?

'''''3.06''''' or '''3.6'''? Big difference!
Firefox 3.0 was released in June 2008, whereas Firefox 3.6 was released in Jan 2010.
Install the Portable Firefox 3.6.19 version for use at that website. It won't affect your regular Firefox installation. <br />
http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

I have 4.0.1, with the RealPlayer download plugin. I would love to update, but I understand that the plugin is incompatible with the update. I use the RP download plugin regularly, and will not update until it's compatible. Any info on this?

..... Windows 7, but I think you know that already. No more info, pretty basic question....

..... Windows 7, but I think you know that already. No more info, pretty basic question....

Using Terminal to compile Freetype, FontForge, and Wine (NOT DARWINE)

Similar Messages

Maybe you are looking for