Using the lookup function in Numbers '09
I'm looking for the way to have the lookup function in Numbers '09 return an error for a non-exact match. Eg. I want an invalid part number to state this, but currently all I can get is the return of data for the closest match. Thank you.
when you use the VLOOKUP() function the last, optional, argument can request and exact match. When an exact match is not available VLOOKUP() will return an error.
you can use the IFERROR() function to trap errors like this:
=IFERROR(<FUNCTION_TO_TRY>, "NOT FOUND")
In your case.... if <FUNCTION_TO_TRY> is you VLOOKUP(<WHAT_TO_FIND>, <RANGE>, <COLUMN>, 0), the "0" specifies exact match and you could then place all this in the IFERROR() like this:
=IFERROR(VLOOKUP(<WHAT_TO_FIND>, <RANGE>, <COLUMN>, 0) "NOT FOUND")
<WHAT_TO_FIND> is what to look for,
<RANGE> is where to look,
<COLUMN> is the number of the column in the range you want to return
Similar Messages
-
Using the IF function with a range of numbers
I am working with the IF function and trying to get it to work "if" the number I'm examining is within a range of numbers.
Example:
If a wigit costs between $1000 and $1999, then a discount of $100 is given
If a wigit costs between $2000 and $2999, then a discount of $150 is given
If a wigit costs between $3000 and $3999, then a discount of $225 is given
And so on.
If cell A1 always holds the current cost of the wigit being sold.
cell B1,B2,B3 holds the value of the discount values respectively.
In cell C1 I would like to return what the current discount value is to be given for the wigit price in cell A1?
How do I do this using the IF function or is there another way?
Thanks,
RyanHI Ryan,
In this post you have, except for the issue noted by Badunit, the basis for the discount table described by Wayne:
I'm trying to devise a way of knowing what Cash Card a customer will receive depending on the amount of the purchase, based on the following table:
$0 to $999 purchase = $50 Cash Card
$1,000 to $1,999 purchase = $100 Cash Card
$2,000 to $2,999 purchase = $200 Cash Card
$3,000 to $3,999 purchase = $300 Cash Card
$4,000 to $4,999 purchase = $400 Cash Card
$5,000 to $5,999 purchase = $550 Cash Card
$6,000 to $6,999 purchase = $700 Cash Card
$7,000 to $7,999 purchase = $850 Cash Card
$8,000 to $8,999 purchase = $1,000 Cash Card
$9,000 to $9,999 purchase = $1,200 Cash Card
$10,000 to UP purchase = $1,500 Cash Card
To take care of the issue noted by Badunit, you need to revise the top line to state the minimum purchase necessary to earn a cash card, then add a line above that to handle purchases under that amount. I've arbitrarily chosen a $500 minimum, which results in these two lines:
$0 to $499 purchase = $0 Cash Card
$500 to $999 purchase = $50 Cash Card
To write this as Wayne's table, you need to remove all of the text (including the $ currency markers), the top end of each range, and the = sign. What you're left with is two columns of numbers: The bottom number of each range of values, and the number telling the dollar amount of the cash card for that range. Here's your table, edited to make it work with LOOKUP:
Here is a second table (Main), containing only the labels and the two cells involved in the calculation of the cash card amount. The Purchase amount is the amount used in your example. The Cash Card amount is produced by the LOOKUP formula below the image.
Purchase price is in cell B1 of the table "Main". The LOOKUP formula is in B2:
B2: =LOOKUP(B1,CC Amt :: A,CC Amt :: B)
LOOKUP acts essentially as you request in your post containing the iPad image with the time shown as 1:46. But it takes a much simpler approach.
Here's the syntax:
LOOKUP(search-for,search-where,return-from)
LOOKUP gets the search-for value (2535) from cell B1.
It looks in column A of the table "CC Amt" for the largest value less than or equal to the search-for value, and finds 2000.
It returns the value from the same line of column B (200).
Below are two more examples. Main-2 and Main-3 are copies of the Main table. Both contain exactly the same formula as Main, but have had a different Purchase price amount entered. LOOKUP uses the same CC Amt table as is used above, and returns the appropriate Cash Card value for each of the two new amounts:
You may, as implied in your 1:46 post, use a pair of cells to calculate the Cash Card amount for each widget in the purchase, then total the Cash Card amounts, or you may use a single pair of cells, one containing the total purchase amount, the other containing the Cash Card amount due for that total. That choice is yours. The formula is the same for either case.
Regards,
Barry -
LINEST function using Numbers for Mac
Thank you for your help. This page is somewhat helpful, but I still don't quite understand. I am using the Numbers program, and my assignment calls for me to use the LINEST function to return a set of 10 values.
When I googled how to do this, a lot of pages mentioned hitting "command+enter" to complete the array function, but they were using an older version of Numbers and it doesn't do anything when I try it in the new version. I tried using "Index" with LINEST, and i've managed to get about 5 values out of it. -
How to use the Table Function defined in package in OWB?
Hi,
I defined a table function in a package. I am trying to use that in owb using Table function operator. But I came to know that, owb R1 supports only standalone table functions.
Is there any other way to use the table function defined in a package. As like we create synonyms for functions, is there any other way to do this.
I tryed to create synonyms, it is created. But it is showing compilation error. Finally I found that, we can't create synonyms for functions which are defined in packages.
Any one can explain it, how to resolve this problem.
Thank you,
Regards
Gowtham Sen.Hi Marcos,
Thank you for reply.
OWB R1 supports stand alone table functions. Here what I mean is, the table fucntion which is not inculded in any package is a stand alone table function.
for example say sample_tbl_fn is a table function. It is defined as a function.It is a stand alone function. We call this fucntion as "samp_tbl_fn()";
For exampe say sample_pkg is a package. say a function is defined in a package.
then we call that function as sample_pkg.functionname(); This is not a stand alone function.
I hope you understand it.
owb supports stand alone functions.
Here I would like to know, is there any other way to use the functions which are defined in package. While I am trying to use those functions (which are defined in package -- giving the name as packagename.functionname) it is throwing an error "Invalid object name."
Here I would like know, is there any other way to use the table functions which are defined in a package.
Thank you,
Regards,
Gowtham Sen. -
How do I use the print function to output a numeric variable with a fixed amount of leading zeroes
I need to create an output from a T-SQL query that picks a numeric variable and uses the print function to output with leading zeroes if it is less than three characters long when converted to string. For example if the variable is 12 the output should
be 012 and if the variable is 3 the output should be 003.
Presently the syntax I am using is PRINT STR(@CLUSTER,3) . But if @CLUSTER which is numeric is less than three characters I get spaces in front.
Please help!>> I need to create an output from a T-SQL query .. <<
NO! NO! In RDBMS, we have a presentation layer that handles displays. We do not ever do it in the database. This is fundamental. But more than that, the purpose of PRINT is for debugging in T-SQL and never for output.
You are still writing 1960's COBOL or BASIC, but you want to to it in SQL. You probably picked the wrong data type (a numeric that should be a string) and are trying to repair your design error.
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL -
I have an iPad mini, I am connected to my work wireless connection. My printer also is on the same wireless network, however I am not able to print to my airprint enabled printer through this wireless connection. Is there a way to direct connect to the printer via a cable ?
I am missing something here on the connection. I am thinking possibly a firewall here at work will not allow me to use the airprint function. Help ?There is no support for wired printing.
It is probably a firewall issue, possibly where all inbound communications are blocked. Since you're at work, I'd call your work IT department and find out from them what you can/can't do. -
I am currently away from my MAC and want to send an email through apple mail with the bcc functionality. I am using the cloud to get to my mail, however, I can't figure out how to use the BCC functionality, please help. Thanks!
Open your mail,
lower left corner click on settings,
go to composing and check BCC, save and your done -
How to Use the language function for assignment and validation
Hi All,
If anyone can explain me in details with example ,how to use the language function for assignments and validations?
Thanks
ArnabHi Arnab,
The expression is checked only for the current MDM session.
If u login with the ABC language it will always show the ABC language no matter how many times u execute it.
Try connecting to the DM with the XYZ language.
It should go to the if part rather than else.
Hope it helps.
Thanks,
Minaz -
How to use the CMS functionality in Sun Portal Server 7.2
Hi All,
How to use the CMS functionality using the ccd.war(Portlet) which is available in the library as i could add it to my channel but not able to show the functionality as it is showing the error msg "You are currently not logged in. Please login." should I create userid and there respective roles inorder to use the CMS functionality.
Has any one used this as I could this in glass fish server.
Any Input is appreciated.
Thanks & regards
SrikanthHave a look at the "*Roles*" section of the portal server 7.2 content management system guide
http://docs.sun.com/source/820-4275/index.html . You can also look at [project mirage|https://mirage.dev.java.net] for some screencasts
Alternatively,
1. ccd.war has 3 portlets in it:
(a) custom content definition portlet
(b) custom content portlet
(c) workflow portlet
2. Inorder to work with these portlets, user needs to be in anyone of the below roles:
(a)Consumer (b) Editor (c) Approver (d) Administrator (e) Submitter (f) Contributor (g) Publisher
3. By default ccd.war gets deployed using a default roles file (/var/opt/SUNWportal/tmp/ccd.roles.properties)
Note: In windows, you may not find this file
4. Access the portlets as a user in any of the role mentioned in the ccd.roles.properties
(OR)
you can use a new roles file which has mapping to your custom roles. For this , undeploy existing ccd.war and deploy again with a new roles.properties file
Hope this helps! -
How to use the divide() function in bpel
Hi All,
How to use the divide() function in bpel.
pls can u give the one sample example2 div 4
Eg;
<assign name="Assign_1">
<copy>
<from expression="2 div 4"/>
<to variable="outputVariable" part="payload"
query="/client:testProcessResponse/client:result"/>
</copy>
</assign>
--Prasanna -
How to use the pps function from JCOP?
Hi
I'm trying to use the pps function from JCTerminal (JCOP API: [url http://www.cs.ru.nl/~woj/jcopapi/com/ibm/jc/JCTerminal.html#pps(int, int)]pps function ) to connect my client to a virtual card with a specific protocol (T=0).
But I always got the error: "Protocol and parameter selection not supported by this terminal!"
I've tried to make an ATR that support both protocol : [url http://smartcard-atr.appspot.com/parse?ATR=3b909580811fc7dc]3B 90 95 80 81 1F C7 DC.
I really don't know what value to put in the second parameter (baud rate), I've tried with 150000, which is in the range of the ATR but I'm not sure this is correct. And I could't find any example of it.
I'm also not sure where to put the pps command, the specification say directly after a reset, so I tried this implementation:
System.out.print("Start");
readers = TerminalFactory.getDefault().terminals().list(State.CARD_PRESENT);
//If no readers has a card it ends the process
if(readers.isEmpty()){
System.out.println("\nNo card in the reader...");
return;
System.out.println("\nReader Type: "+readers.get(0).toString());
term = (PCSCJCTerminal)JCTerminal.getInstance("PCSC", readers.get(0).toString().substring(15));
term.open();
System.out.println("\nTerminal opened");
//Getting the ATR
atr = new ATR(term.waitForCard(2000));
try {
term.pps(JCTerminal.PROTOCOL_T0, (int)150000);
} catch (Exception e) {
e.printStackTrace();
System.out.println("ATR: "+toHex(atr.getBytes()));
//sending a data 11223344
System.out.println("\nsending data: 11223344");
byte[] responsesend = term.send(0,cmdsend,0,cmdsend.length);
System.out.println("Response data is:" + toHex(responsesend));
//close terminal
term.close();
System.out.println("\nTerminal closed");I've got this output on the console:
<font size="2">StartReader Type: PC/SC terminal Virtual CAD Reader 0
Terminal opened
ATR: 3b 90 95 90 00 81 1f c7 cc
sending data: 11223344
<font color="red">Protocol and parameter selection not supported by this terminal!</font>
at com.ibm.jc.JCTerminal.pps(Unknown Source)
at com.test.essai.main(essai.java:46)
</font>>
And If I take a look at the data exchanged with the card:
<font size="2">Running in Virtual Card mode...
ATR: 3B909580811FC7DC
Waiting for event (power: off, protocol: unknown/undefined)...
Waiting for event (power: off, protocol: unknown/undefined)...
Raw event data: 01
Event: VCAD_EC_POWER_ON (0x01)
Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_POWER_ON) ATR: 3b909580811fc7dc
Raw reply data: 003b909580811fc7dc
Sending reply...
Waiting for event (power: on, protocol: unknown/undefined)...
Waiting for event (power: on, protocol: unknown/undefined)...
Raw event data: 06ff11957b
Event: VCAD_EC_EXCHANGE_TPDU (0x06) C-TPDU: ff11957b
Accepting any PPS request parameters: Protocol: t=1; FI=9, DI=5
Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_EXCHANGE_TPDU) R-TPDU: ff11957b
Raw reply data: 00ff11957b
Sending reply...
</font>>
This (above) is the PPS command but not from the PPS function, it is always sent with protocol T=1
<font size="2">Waiting for event (power: on, protocol: t=1)...
Raw event data: 0501
Event: VCAD_EC_SET_PROTOCOL (0x05) Protocol: t=1
Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_SET_PROTOCOL)
Raw reply data: 00
Sending reply...
Waiting for event (power: on, protocol: t=1)...
Raw event data: 0600c10120e0
Event: VCAD_EC_EXCHANGE_TPDU (0x06) C-TPDU: 00c10120e0
Handling protocol-specific command...
Protocol block:
NAD: 0x00
PCB: 0xc1 (T1_S_BLOCK); S-Block type: T1_SBT_IFS_REQ
LEN: 1
INF:
IFS: 20
EDC: 0xe0
Changing IFS(other) from 32 to 32
Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_EXCHANGE_TPDU) R-TPDU: 00e10120c0
Raw reply data: 0000e10120c0
Sending reply...
Waiting for event (power: on, protocol: t=1)...
Raw event data: 0600001300a404000d54657374436c69656e7441707000f0
Event: VCAD_EC_EXCHANGE_TPDU (0x06) C-TPDU: 00001300a404000d54657374436c69656e74
41707000f0
Processing app. command...
App. block:
NAD: 0x00
PCB: 0x00 (T1_I_BLOCK); Seq. #: 0; More data: 0
LEN: 13
INF:
00a404000d54657374436c69656e7441707000
EDC: 0xf0
cmd name: N/A (class #4)
cmd: 00a40400 0d 54657374436c69656e74417070 70
Responding with the reversed command data, SW is hardcoded to 90<INS>
rsp: 707041746e65696c4374736554 90a4
Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_EXCHANGE_TPDU) R-TPDU: 00000f70704
1746e65696c437473655490a475
Raw reply data: 0000000f707041746e65696c437473655490a475
Sending reply...
Waiting for event (power: on, protocol: t=1)...
Raw event data: 060040041122334400
Event: VCAD_EC_EXCHANGE_TPDU (0x06) C-TPDU: 0040041122334400
Processing app. command...
App. block:
NAD: 0x00
PCB: 0x40 (T1_I_BLOCK); Seq. #: 1; More data: 0
LEN: 4
INF:
11223344
EDC: 0x00
cmd name: N/A (class #1)
cmd: 11223344
Responding with the reversed command data, SW is hardcoded to 90<INS>
rsp: 9022
Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_EXCHANGE_TPDU) R-TPDU: 0040029022f
0
Raw reply data: 000040029022f0
Sending reply...
Waiting for event (power: on, protocol: t=1)...
Raw event data: 03
Event: VCAD_EC_POWER_OFF (0x03)
Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_POWER_OFF)
Raw reply data: 00
Sending reply...
Waiting for event (power: off, protocol: unknown/undefined)...
</font>>
If someone know how to use this function or have any advice to help me to select a specific protocol with Jcop API, please let me know.
If you you need any more information don't hesitate to ask.
Best regards
Edited by: Cyril on Sep 22, 2011 9:54 AM-1
I'm using a virtual terminal (windows driver), and I don't see how I could turn off the Auto-pps. I've also tried with a real reader and a card and I have the same error.
-2
I've tried value in the range of the atr (based on this analysis: [url http://smartcard-atr.appspot.com/parse?ATR=3b909580811fc7dc]http://smartcard-atr.appspot.com/parse?ATR=3b909580811fc7dc ). But I don't know if only I value of baud-rate is possible in the range. Anyway I just would like to change the protocol, not the baud-rate.
-3
I've already tried to call pps function before, after the first reset, or with another reset later and I always got the same thing.
term = (PCSCJCTerminal)JCTerminal.getInstance("PCSC", readers.get(0).toString().substring(15));
term.open();
System.out.println("\nTerminal opened");
//Getting the ATR
atr = new ATR(term.waitForCard(2000));
System.out.println("ATR: "+toHex(atr.getBytes()));
jcard = new JCard(term,atr,0);
jcard.reset();
try {
term.pps(JCTerminal.PROTOCOL_T0, (int)312500);
} catch (Exception e) {
e.printStackTrace();
}The same pps is always send after each reset... -
I'm trying to find out if I can use the mirror function to look at large construction drawings using my Apple TV. It says that my MacBook Pro has to be early 2011 or newer and I can't remember what it is.
Mactracker - Get Info on any Mac
-
I used the disc and track numbers, but it won't show on my iPod as separate CDs?
Hi,
I used the disc and track numbers of get info in iTunes, and I would like to have my CDs separate like if they are 3 CDs on my iPod Classic rather then having a big long list of songs, but after using the disc and track numbers, I still don't see on my iPod which one is CD1, and etc. I took a screenshot of my iTunes. How could I have my CDs separate just like the originals?
http://imageshack.us/photo/my-images/341/89226837.jpg/
That's the screenshot.See Corrupt iPod classic for tips if the iPod isn't working as expected and contains media that isn't in your active library.
See Grouping tracks into albums for organizational tips.
tt2 -
I am trying to control a Shockwave app form another machine, using "Pusher" service (websockets), and everything is ok so far; but when I try to send the shockwave app the text recieved from another machine, using the "EvalScript()" function (as documented), I only get the message "Uncaught ReferenceError: evalScript is not defined" in the browser's console. What am I doing wrong?
'm using the following script in the webpage where the shockwave object is located:
<script type="text/javascript">
// Enable pusher logging - don't include this in production
Pusher.log = function(message) {
if (window.console && window.console.log) {
window.console.log(message);
var pusher = new Pusher('abc963cf3e6g678879e');
var channel = pusher.subscribe('Galileo_channel');
channel.bind('Galileo_event', function(data) {
evalScript(data.message);
alert(data.message);
</script>
The "alert" is working fine, but I can't get JavaScript to recognize the EvalScript (I even tried calling the shockwave object, ie: "extev01.evalScript()", since the object's ID is extev01, but it doesn't work, either).
Help!Thanks Sean.
I tried your suggestion first, using getNetText to poll the server and read a text file. The drawbak is that I had to poll the server constantly, since I could not know in advance when the text file was going to change (and it's not practical to stump the server and connection).
I've kept trying the EvalScript, asigning the Shockwave object to a variable first, then calling the EvalScript() in the object, but it doesn't work, either. I think I will simply use JavaScript and forget about shockwave altogether, since everything is working fine up to that point (although it would be nice to be able to use Lingo for the rest of the app). -
Just installed a HP Color Laserjet CM2320nf MFP printer, at the same time I upgraded to Lion. It prints fine, but I cannot use the scan functions. I downloaded the most recent driver! Any help would be appreciated.
HP says that the drivers for your all in one print/scanner are downloadable from apple. For the scanner to use preview. image capture or the scan icon from the print driver queue. I don't know how old your HP is, but I know that the newer Os from apple don't support a lot of older printers. You might be able find a third party driver that could work.
Maybe you are looking for
-
What is the best way to keep my personal files stored in iCloud separate from my work-related files?
What is the best way to keep my personal files stored in iCloud separate from my work-related files? It seems that I'm not allowed to link my iPad mini and my work iMac using two different accounts, so I'm wondering how to make my single personal acc
-
Is there a limitation for Send Up file size.
Tried three times load little over 100 Mb pdf file, but always an error occur. Is there a file size limitation in this new version of Adobe send now?
-
Mysql select statement where = works and LIKE fails
I am using Flash Builder 4. On the server side I use php and mysql. I created a php dataservice using FB4. My plan had been to allow users to enter a search term and query the database using a "LIKE" statement. FB4 created the php code that I simply
-
Error: You have reached the limit of active temporary sites for this account.
When publishing a new site from Muse I got the following message: Error: Could not create Adobe Business Catalyst temporary site. You have reached the limit of active temporary sites for this account. I have only 17 active sites, 5 of them are launch
-
Garage band keeps crashing please help
every time i open garageband it crashes and i get this message can anyone help Process: GarageBand [294] Path: /Applications/GarageBand.app/Contents/MacOS/GarageBand Identifier: com.apple.garageband Version: 6.0.4 (427