Using the same Message Type
Is it possible to use the same Message Type in several Message Interfaces?
I have BPM which is using AbstractInterface.
I created this interface based on my Message Type.
I have got mapping exeption. Maybe it is because of using the same message type.
> Is it possible to use the same Message Type in
> several Message Interfaces?
sure!
> I have got mapping exeption. Maybe it is because of
> using the same message type.
I don't think so.
Stefan
Similar Messages
-
Problem importing two service interfaces using the same data types
Hi,
I've been playing around with BPM for a while. Now I wanted to add a custom service interface to my starting event. I created the interface in ESR of CE 7.11. After importing I get this error message and I can't use the interface:
Cannot change XsdSimpleTypeDefinition AcademicTitleCodeContent by importing the document http://sap.com/xi/APPL/SE/Global::src/wsdl/TestInterface.wsdl, because it is already defined in the document http://sap.com/xi/APPL/SE/Global::src/wsdl/rootwsdl_CustomerERPByIDQueryResponse_InService.wsdl in this project. Importing into another project might be possible.
Of course the problem is clear, but how can I achieve importing two service interfaces that use the same data type without changing the xsd source?
Thanks in advance,
ManeSorry for the late answer, but I am really busy at the moment.
Unfortunately I can't the Interface and data types are already changed.
But this happened various times. Each time I already had imported a SAP Enterprise Service into NW BPM that contains a bunch of inline data types. While creating my own interface I referenced one of those data types that are stored in a SAP namespace. After import the error message appeared.
In the wsdl of the created interface there is a import statement for the namespace where the referenced data types origin from. Additionally there is a namespace definition xmlns:p1="SAPnamespace". In the element the type is "p1:ReferencedType". Could this maybe cause the error, because one time it is with this leading p1 in my created wsdl and once without in the SAP Service wsdl?
Thanks and I am looking forward to next EhP of NW BPM,
Mane -
Two print programs using the same output type in t-code v/40
Hi,
I am trying to use the same Output type RD00 to print diferent forms.
In t-code v/40 we can fill a second Processing but how this work?
Can someone tell me more about this?
The final goal is to print diferent forms according to different companies.
Thank you and best regards
João FernandesHi,
It is not possible to have 2 different routines to be assigned to one output type in the procedure. I think when you say 2 routines, you are saying 2 logics or you are saying the subroutines KOBED and KOBEV of the routine.
In all reqmt routines, which is in discussion now, only one of the subroutines will be always called, though I dont know unfortunately which one is this. As you said, that only one of your processing logic works, that is the right subroutine area where the second logic should also be coded. So please move your code from the inactive subroutine area to the active subroutine area. Now you should be able to see both the validations being active.
Hope this helps. If the case is different, please let us know. -
Is there any constrain in using the same order type for MTS and MTO
Hi,
i have the constrain to use single production order type .
Can i use single order type for MTO and MTS.
is there any constrain in using the same order type for MTS and MTO.
pls help me.Hi,
There is no constraint or limitation in using the same production order type for MTS and MTO . Settings in requirement class and material master will mainly control whether the flow is MTS or MTO.
Regards,
Mrinal -
Want to use the same message filter on various computers
I have three computers all running thunderbird at different locations in the world. I am using IMAP thus I have all emails anywhere. Now I would like to run the same message filter on any of these, but I can not export/import the message filter so that I have copies of my filter. What should I do?
The file that stores your filter settings is called "msgFilterRules.dat". Each account will have its own "msgFilterRules.dat" file, stored in the "Local Directory" for the account in your profile. The Local Directory is specified at the bottom of Tools -> Account Settings -> Server Settings, right by the Browse button. The filters for Local Folders are stored in the Mail\Local Folders directory in the profile.
If you want to duplicate an accounts filters in another account you don't need to create them again. Exit Thunderbird and copy the "msgFilterRules.dat" file instead. If the account is in another profile and it uses custom headers you will also need to copy the mailnews.customHeaders setting from prefs.js. -
Acting as router and partner with the same message type
Hi All
Let A and B be two companies communicating with each other
via a company called R. Some MSCONS messages will just be
routed, some MSCONS messages will be kept by R, processed
and then routed on. The only way to know if it should be
processed or not is to read some of its fields and compare
them with current state in the database owned by company
R. If company A sends a MSCONS to B via R, the sending and
receiving identification id in the message will belong to
A and B, not R.
To make it more complicated, there are about 200 companies
communicating via R in the same way as A and B. Further
more, MSCONS is only one out of about 15 types of message
routed under these conditions.
Any suggestions on how to apply B2B to this use case is
most appreciated.
Best regards
PärHi
I have a hard time to get following use case to work.
If company A sends an MSCONS to company B and C via R, is there a
way to configure B2B in R so that only one agreement is needed even though
company B and C have different interchange id's?After sending a MSCONS from A to R (host) and I look in reports, I find
that the sender, receiver, exchange protocol, document protocol, and business
action has been identified, but state is set to error. When looking into the log
I find following.
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup Enter
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = InterchangeReceiverQual, val = [ZZ]
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [ZZ]
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = InterchangeSenderID, val = [27700]
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [Emix]
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup Value and doc parameter don't match
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = InterchangeReceiverID, val = [10001]
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [null]
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup Value doesn't match, doc parameter is null
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = Standard, val = [EDIFACT]
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [EDIFACT]
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = InterchangeControlVersion, val = [2]
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [2]
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = ec_DataNodeName, val = [Interchange]
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = InterchangeSenderQual, val = [ZZ]
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [ZZ]
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup return = false
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup return = false
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Param Name = TPName
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Value = Actor
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doCommit Enter
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doCommit getLookUpError Key = key = [InterchangeSenderID] value = [27700] param = [Emix] Value = null
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doCommit getLookUpError Key = key = [InterchangeReceiverID] value = [10001] param = [null] Value = null
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doCommit NodeGUID = {7DDD0E19-7D9E-40AC-8DAC-A10BDB9AFB9E} position = 0
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doCommit Leave
2007.09.25 at 17:32:47:526: Thread-20: B2B - (DEBUG) iAudit report :
I do not want to add interchange sender id's 10001 and 27700 to
Document Protocol Parameters because then I make the document
protocol partner sensitive.
Any help is most welcome.
Best regards
Pär -
Hi all!How to use the fault message types
Hi all, i am new beginner on XI.
I have read the introduction in SAP Library about
fault message types
but the steps of how to use fault message are clear
could you help me?
could you give me some guide or docs or links?Hi,
These might help you:
http://help.sap.com/saphelp_nw04/helpdata/en/f3/c26c3cbfac384fe10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5d/a45c3cff8ca92be10000000a114084/frameset.htm
Regards,
Chandra -
How to maintain 2 condition record for the same message type
Hi,
My requirement is that I have got a PO output type NEU.Now when i release the PO 2 mesages should get outputed.
1) A print should go to the Printer ie:Option1 Print output
2) A PDF should go to the vendor ie:Option 5 External send
I have completed the config part but I am having a problem while maintaing the condition record for simultaneous output of message 1 & 5.
In MN04 i tried to maintain 1 & 5 but it doesn't allow me to do so?Why
How do I output 2 messages while releasing the PO
KNPlease check this answered link:
Re: Two PO Outputs.
Re: Emailing PO to Vendor, copy to buyer as well
Edited by: Afshad Irani on Jun 16, 2010 12:05 PM -
Change default view across multiple page libraries using the same content type/types?
I am the editor for a large SharePoint publishing site with approximately 130+ subsites. Based on our content, I've create two diffferent default views that will come in handy as we move to a distributed authorship model. (I'm thinking specifically about
the Quick Edit/Excel-like feature to make quick changes to page/document metadata.)
The authors/content owner/editors have NO experience with SharePoint, so while the benefit of using views is that they can be tailored to individual needs, I'd like to start them off with something that is VERY easy to change on the fly. It's either that
or, as just a power user in the CMS, go to each individual page and document library and change it manually, which could take days, if not longer. Thanks!
Ryan D WattersEssentially, yes.
That said, I am using SharePoint 2013, and I just now realized that I posted this in the legacy SP forum. You'll have to excuse me -- this is my first time posting:)
Basically, I have two different "ideal" views based on two different site templates. These two site templates account for over 100 publishing subsites. The view has 18 different metadata that will make editing/making changes to article pages much
easier for content owners because they will be able to go into the page libary>ribbon>library>quick edit and edit the metadata as if it were an Excel spreadsheet. This comes in especially handy for things like rollup order between primary, secondary,
tertiary pages within a subsite. Ideally, it would be nice to be able to add that view as an option within the CMS (similar to the way you can add a view style).
I hope that makes sense. Also, I'll repost the question to SharePoint 2013. Much appreciated!
Ryan D Watters -
Hi,
is it possible to use the same message types in two different BPEL processes ?
If yes, could you show me an example ?
thank you & byeYes of course, just make sure the xsd's match. You can make sure the xsd's are the same in those BPEL processes by:
a) copy the .xsd's yourselves in each BPEL process (this violates the Edsger W. Dijkstra's design principle 'Avoid duplication of volatile information')
b) use a seperate BPEL process for storing all the common xsd's (unfortuately this requires that this process is deployed to the server before you can compile the other BPEL projects).
c) use svn:externals or a custom copy script that will make sure that there is only one source for the XSD's
The IT-eye article on Generate facade classes for multiple Oracle BPEL usertask payload structures at once might be usefull.
Regards,
PieterB -
hello,
I have two idoc types named MATMAS04, MATMAS05.
(to MATMAS05 i have created an extension)
they are both in the same message type MATMAS.
i need to send the two idocs to the same system.
but, in transaction WE20 when i link the message type to the system i can create only one record of the message type. in all the administration tables for IDOCs i can see that i can send to idoc types under the same essage type but WE20 prevents it.
I don't want to create a new message type.
is there a way that i can use the same message type for different idoc types?
Regards,
Roi GrosfeldHi Roy,
This link might help u in idoc programming
http://help.sap.com/saphelp_erp2005/helpdata/en/78/21758d51ce11d189570000e829fbbd/frameset.htm
Hope this helps,
Regards,
Nagarajan. -
My sender and the receiver message types structures are same.do I need to m
Hi all,
My sender and the receiver message types structures are same.do I need to mapping in this case.
If it is not required .Let me know in detail,How to proceed.
Thanks,
SrinivasaHi,
If is just to pass the message (as the sender source is the same as the receiver source),
first you should have the Message Interface of you message
then you should configure the Receiver determination, as the sender interface use your message interface and in the interface determination you can use the same message interface (same name). You dont have to add any mapping, just let empty and save. Just use one message interface for sender a receive.
Any questins let me know.
Regards,
Lpbuff -
How is the Fault Message Type used?
Hi,
I have a HTTP-SOAP scenario.I want to post a request to a HTTP Server using the SOAP receiver adapter and get the ackowledgement message from the receiver, if it was successful or not. Is this possible using the Fault Message type?
If not how else can i capture the response in the EO mode?Hi Sivasakthi
Yes you can capture soap response using SOAP fault message
Check this link for embedded soap response
http://www.w3.org/TR/2000/NOTE-SOAP-20000508/
With this you can refer to this blog as well
Handling Web Service SOAP Fault Responses in SAP NetWeaver XI
Thanks
Gaurav -
Same message type and two different IDOCS need to be triggered
Hi,
I have two idocs with same message type,the partner profile is same.
Please tell if there is any way to handle this situation without changing the message type.
Please do the needful.
Thanks,
NiveditaHi
We can have same message type for different idoc types.
ex:MATMAS.MATMAS01
MATMAS.MATMAS02
MATMAS.MATMAS03
In the above example MATMAS is the same message type for different idoc types.
Thanks -
IDoc processing for same message type but diff extensions
Hi
I want to send idoc when a material is changed. Everything is in place and have also done a test scenario. In partner profile i had the message type linked to basic type and tested which is fine. Now i wanted to have one more idoc created for another extension having the same basic type and linked to the same message type. Have maintained the same in WE20 but when i executed BD10 i could only see one idoc been generated but i need to see two idoc (one for basic type and another for the extended) not sure where i'm missing. any pointers on it pls?Hi ,
if you want to trigger the idoc two times for basic type& Extension..
1 ) you need to maintain WE20 Partner Profiles (This is good already you did)
--> But the Output type for Bsic type & extension type is same so output type is triggered Once so idoc is created One.
2) try to create another Output type in T-code NACE for extension then two Idocs is created one for Basic and another for Extension.
Regards,
Prabhudas
Maybe you are looking for
-
Hi We have a purchase order that has an open GR/IR of $28,037.37 that MR11 does not recognize, therefore I am not able to clear this item. Can anyone please tell me how i can clear this item as it needs to be cleared. Thanks Noopers
-
A previous upgrade was not completed! Rebooting does not work. Can't even uninstall 3.6.18. Get the same '"must reboot'" message.
-
Lightroom Or Photoshop Elements 9
I am an amateur photographer and have used Photoshop Elements for a number of years. I currently have version 7 and I find the program extremely cumbersome and not intuitive. I know I should spend more time learning the program but what I am looking
-
Exporting rushes out of FCP onto DVD QUICKLY!
I have a translator waiting for me to export rolls of rushes from FCP 5.1 onto DVD so they can start work. He doesn't need high res pictures - VHS quality would be fine. I can't seem to use Compressor to do it quickly. Any suggestions kind world? I'v
-
There does not seem to be a way to sync playlists created on the iPod with a windows PC. Can anyone shed some light on this?