My sender and the receiver message types structures are same.do I need to m

Hi all,
My sender and the receiver message types structures are same.do I need to mapping in this case.
If it is not required .Let me know in detail,How to proceed.
Thanks,
Srinivasa

Hi,
If is just to pass the message (as the sender source is the same as the receiver source),
first you should have the Message Interface of you message
then you should configure the Receiver determination, as the sender interface use your message interface and in the interface determination you can use the same message interface (same name). You dont have to add any mapping, just let empty and save. Just use one message interface for sender a receive.
Any questins let me know.
Regards,
Lpbuff

Similar Messages

Send email and the receiver has duplicated text in same email

Hello, Something has really been bothering me. I'm trying to send a email trough Mountain Lion email and my gmail. I copy and paste a letter from word and its in the proper format and looks perfect. The text in the right place and only one version of it. I cc Myself on the email and when I open it has the letter I wrote Twice seperated by 2 line breaks and the bottom one is in different text format. I of course don't want this and cant figure out how to prevent this. Pease help. Thanks so much

It is likely that the pasted text is in rich text format, and an automatic Plain Text alternative is created.
However, I'm not sure how to stop that from happening.
Some people only view emails in plain text, so the plain text alternative is created so that they can see the text of the email.
If you don't need the formatting, you could convert the entire email to plain text before sending.
Why you are seeing both html and plain text, I don't know either.

BPM scenario:single sender message type and multiple receiver message types

Hi,
I am doing a scenario in which i have a single file which may contain different record types say type A,B,C.
I want to separate all records of type A, all records of type B, also all records of type C into different files.
so i will have 3 files of type record A,B,C in destination.
I am using File adapter on both sides.
I think one way may be using ccBPM.Can you please inform me how to achieve it using BPM.
If there is any other way Please mention.

You can use multimapping (with or without BPM)
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible ....without BPM
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure ....with BPM...is it that you will always get three output files?

Problem in sending and viewing of messages in Noki...

I have some wierd and odd kind of problem on my 500 Belle.
My phone is not showing the conversations properly in the Messaging. It is showing the sent messages(from any contact) and the received messages(from same person) separately in the Conversations. that is I am seeing two icons of the same name in the conversations view. Also the one which contains the sent messages is showing the photo of the contact in the icon, while the one containing only received messages is not showing the contact photo(and is showing the default contact logo).
Moreover, when I receive a message from anyone, then after typing my reply in the text box present at the bottom of the conversation, when I press the send/reply button, it shows "Opening..."--->"Invalid contact details: <contact name> <contact name>", And then shows the message that I had written in the text box, as a new message. Then I had to add the contact in the 'To ' box to whom I wanted to reply.
But I am able to reply to the contact if I do so by opening the message icon containing only sent messages to that contact.
I am facing this problem from around a week.
HELP!

Hi, I am from Manila.. I can relate with your story.. i've been using my Nokia 500 Belle more than a year.before i don't have a problem with my phone.but now, it's annoying..
it's so annoying when you reply to the person which is from your contact and you experience that kind of problem..you have to put again the contact person instead of reply to their message..
I'm thinking before,maybe the network has a problem..but since i read this thread..I think the network is not the problem..it's the handset itself..
PAGING NOKIA HELP CENTER .. PLEASE REPLY WITH THIS THREAD.. please show us the solution.. how to troubleshoot with our problem..

My ipad receives email with the hotel wifi but will not send. The error message is "user name or password for ........is incorrect" but both are correct and unchanged. Restarting iPad didnt help.

My iPad receives email on the hotel wifi but will not send. The error message reads "user name or password for smpt......is incorrect" but both are correct and unchanged. Restarting iPad did not help.

I did try this too, but when I access my webmail on the iPad, the iPad doesn't allow me to type my message. I am able to enter in the "to" address and the "subject" line, but then the keyboard will not come up for me to type my message. Is there some trick to this? Very frustrating!

Urgent related to message type structure and proxy

Hello,
My outbound interface related message type structure is like this....
message type name : MSg1
Msg1
x
y
Z
(under z)
a
b
c
ok,Now in generating the proxy how to populate this structure.
For example ...
if Msg type is emp_profile_msg
Emp_name
Empno
Department_name
we use this code
REPORT zblog_abap_proxy.
DATA prxy TYPE REF TO zblogco_proxy_interface_ob.
CREATE OBJECT prxy.
DATA it TYPE zblogemp_profile_msg.
TRY.
it-emp_profile_msg-emp_name = 'Sravya'.
it-emp_profile_msg-empno = '80101'.
it-emp_profile_msg-DEPARTMENT_NAME = 'NetWeaver'.
CALL METHOD prxy->execute_asynchronous
EXPORTING
output = it.
commit work
CATCH cx_ai_system_fault .
DATA fault TYPE REF TO cx_ai_system_fault .
CREATE OBJECT fault.
WRITE :/ fault->errortext.
ENDTRY.
if message type consists structure inside strucutre ..then how to populate those sructure

Hi Sunil,
Please don't mind, but I think I already have posted the answer for this query and have provided some links
Please see the below mail.
urgent related to Mesage types and proxy
Please let me know if you need anything else than the given info.
I have one sample program where we have deal with these kind of sub-sturctures
Thanks
Swarup

Messaging Server 4.1: Received mail is not returned to the sender if the receiving local account does not exist.

I have found that received mail is not returned to the sender if the receiving
local account does not exist. This problem occurs even if I use Console to
enable the Return message to sender option under the error handling methods.
In addition, I have used the configutil
to confirm that I have set the value
for Unknown account action to "13," which corresponds to the settings "Return
message to sender," "Notify the postmaster via email," and "Log the error in
the log file." Yet, in this situation, an error message is being sent to
postmaster, but not to the sender, and the error is not being recorded in the
log file.
<P>
Do the following steps:<BR>
<P>
<OL>
<LI>From Console, open the appropriate Messaging Server.
<LI>Click the Configuration tab.
<LI>Open the Services folder.
<LI>Select SMTP.
<LI>Click the System tab.
</OL>
<P>
Check the "Domain handled by this server exclusively" field to make sure that
your mail domain is listed. If your mail domain is not listed, then Messaging
Server will assume that there is another mail server that is handling the
domain listed and will forward requests to this server.
<P>
For more information, please see the document <I>Messaging Server
Administrator's Guide</I>, Chapter 3, Configuring SMTP Services at <BR>
http://docs.iplanet.com/docs/manuals/messaging/nms41/ag/smtp.htm#1010371

On Thu, 12 Dec 2013 16:16:02 +0000, lpphiggp wrote:
> I'm seeing this XTCOM error occur all over our /var/log/messages for one
> server, running SLES11sp2 / OES11/sp1;
>
> I don't really know what this is even for. We don't use NetStorage or
> iPrint even, this server only does basic NCP file serving, DHCP, and
> hosts a GroupWise PO.
> Is this anything to be concerned about?
If this:
http://www.linuxquestions.org/questi...entication-vs-
edirectory-825043/
is to be believed, it seems to indicate that your NAM configuration on
this server is not valid. I'm not seeing this message here on the OES
servers I looked at, and NAM is working correctly here.
David Gersic dgersic_@_niu.edu
Knowledge Partner http://forums.netiq.com
Please post questions in the forums. No support provided via email.
If you find this post helpful, please click on the star below.

When I receive and answer e-mail, the correspondence is usually "nested" with the original message, and the number of replies, etc. are indicated with a number next to the original message. How can I change the mail settings so that every reply is listed

When I receive and answer e-mail, the correspondence is usually "nested" "behind" the original message, and the number of replies, etc. are indicated with a number next to the original message in the inbox. How can I change the mail settings so that every reply is listed individually in the inbox instead of having them "stacked" behind the original message. I'm afraid I might accidentially overlook messages the way they are handled now.

Somebody here will correct me if I'm wrong, but what you have to do is go into Settings, Mail/Contacts/Calendars and under Mail, turn off "Organize by Thread". I think that will make each message show individually.

I am having problems with my outlook 2011. While i am able to check and SEND email on all my other devices ( Ipad, iphone, Macbook), I am unable to do so with my iMac. This problem started suddenly and the error message i get is error 5.7.8. Please Help

I am having problems with my outlook 2011. While i am able to check and SEND email on all my other devices ( Ipad, iphone, Macbook), I am unablesend any email with my iMac ( i can recieve email) . This problem started suddenly and the error message i get is error 5.7.8. I have read the threads on line and went into settings, even created a new profile, nothing helps...Please advice..is this something to do with my keychain Access?

As Outlook is not an Apple product, you will find more helpers familiar with Outlook here:
Office for Mac forums

When i go onto iPhoto and choose a photo to send via email, i click send and the photo is sent and received but doesn't appear in my email sent items ?

when i go onto iPhoto and choose a photo to send via email, i click send and the photo is sent and received but doesn't appear in my email sent items ?

This is not the iPhoto forum. In any case in iPhoto>Preferences select Mail or whatever email program you are using to email as the desired choice. You are probably sending directly through iPhoto.

I have moved and changed ISP from Brighthouse to Verizon. I am receiving my icloud emails, but the senders are receiving messages that they are undeliverable. I can't find the cause or solution to the problem. Any thoughts?

I have moved and changed ISP from Brighthouse to Verizon. I am receiving my icloud emails, but the senders are receiving messages that they are undeliverable. I can't find the cause or solution to the problem. Any thoughts?
PS. I have deleted Roadrunner accounts, and reset new email account.

You can't. The only way to get songs in the Music app is to sync from a computer or to download from iTunes.

Problem between SOAP Sender and JDBC Receiver

Hi,
I have a asynchronous scenary between SOAP Sender and JDBC Receiver.
The idea is sending an ID for updating one register.
Table structure is:
TABLE AS_PERSONA
    (P_RUT                         VARCHAR2(10) NOT NULL,
    P_NOMBRE                       VARCHAR2(50),
    P_APELLIDO                     VARCHAR2(50))
The ID is the P_RUT field.
The structure of message that I send by SOAP, is the following:
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
     <SOAP-ENV:Body>
          <m:MT_CONS_SOAP xmlns:m="urn:prueba:voliva">
               <CONSULTA>
                    <P_RUT>15445</P_RUT>
               </CONSULTA>
          </m:MT_CONS_SOAP>
     </SOAP-ENV:Body>
</SOAP-ENV:Envelope>
The JDBC receiver structure is:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_CONS_PERSONA xmlns:ns0="urn:prueba:voliva">
     <Statement>
          <AS_PERSONA action="UPDATE">
               <table>AS_PERSONA</table>
               <access>
                    <P_NOMBRE>DELETE_BY_XI</P_NOMBRE>
                    <P_APELLIDO>DELETE_BY_XI</P_APELLIDO>
               </access>
               <key>
                    <P_RUT>15445</P_RUT>
               </key>
          </AS_PERSONA>
     </Statement>
</ns0:MT_CONS_PERSONA>
When I do a call to SOAP by XMLspy, it returns a message without data, that means succesfull reply.
I see message monitor and see the succesfull flag. But in the database it doesn't update the register.
This scenario was proved using the File Sender and same JDBC Receiver, then result was succesfull.
I proved SOAP Sender with a File Receiver, storing information from SOAP sender in an archive, and works well.
Then I imagine that exist some problem between SOAP and JDBC. what could be happening ?
Thanks.

Hi,
Looks like the problem is with the JDBC receiver...try updating the value in the table by using a File-JDBC scenario..does it work..check the adapter monitor in RWB..
Regards,
Sushumna

One sender and two receiver

Hi All,
I have a scenario in which there is only one outbound Message interface and 2 inbound message interfaces ( one sender and two receiver). In XI, how can i configure the interface determination for this? Shall i need to put * for receiver and add 2 inbound message interfaces and interface mappings.
Thanks
Michael

Use xpath in your interface determination in case you have some conditions, else u can *** multiple interfaces in your int. det.. also ref:
/people/suraj.sr/blog/2006/01/05/multiple-inbound-interfaces-within-a-service

Mapping between Sync sender and Async Receiver

Hi Experts,
How to do mapping between Sync sender and Async Receiver?
Flow: Sync SOAP Sender Client -> First Async webservice call -> Second Sync webservice call
1. I have to send some input/request details to first webservice call. It will just update the database.If I do mapping with SOAP Sender client and first Async webservice.. I am getting timeout, because it expects response mapping too.
2. Only Second webservice call return the response back to SOAP Sender client.Here mapping between SOAP Sender client and Second Sync webservice call. I don't have any problem here.
I have to pass the same request info to both webservice calls, Please tell me how to do the async mapping in BPM?
Regards
Sara

Hello Sara,
Hope these blogs are useful to you..
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi - Message Flow in XI
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in
ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in
ccBPM
Thanks,
Satya Kumar

How to test message mapping in XMLSPY if two receive message types exist?

Hi gurus,
In our message mapping, we have one send message and two receive messages, the testing is ok in message mapping test tool in ESR. While in XMLSPY, it gave the error because of the reason as follows:
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
Even after we added those statments, the error was still there.
How can I resove this problem? Thanks in advance.

Hi,
In the source XML message you may find some extra tags being included.
Just remove those extra tags, then it will work fine.
For example:
If your source XML message is:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
<ns1:MT_FileToFile_MultiMap_Src xmlns:ns1="http://FileToFile/MultiMap">
<Input>
<Name>ab</Name>
<EmpId>123</EmpId>
</Input>
</ns1:MT_FileToFile_MultiMap_Src>
</ns0:Message1>
</ns0:Messages>
remove the extra tags and then it will look like:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_FileToFile_MultiMap_Src xmlns:ns0="http://FileToFile/MultiMap">
<Input>
<Name>ab</Name>
<EmpId>123</EmpId>
</Input>
</ns0:MT_FileToFile_MultiMap_Src>
i hope this will help you,
regards,
ganesh.

My sender and the receiver message types structures are same.do I need to m

Similar Messages

Maybe you are looking for