Using user exit. ( LVMPTZZ, LVKMPFZ1). used in Credit Management

Hi
How to find  using user exit. ( LVMPTZZ, LVKMPFZ1). used in Credit Management .
Plz provide path
Regards
Rohit

Hi,
You can find exits through transactions# SMOD & CMOD also.
Regards
Chandra

Similar Messages

  • How to find out FICO user exits that are used by User

    How to find out the FICO user exits that are used by user.

    Go to tcode CMOD. In the project field drop down your list there. Put a Z* there and run the list. These should be all the exits that are activated. Search for the ones that pertain to FI. You can also search by development class. You need a little ABAP knowledge to search easily. You get this by going to the tcode then to status then to the program then to the attributes. There you find the development class. Ie FBAS.
    pls assign points if helpful as a way to say thanks.

  • How to know where the user exits or enhancement used in standard sap code?

    Hi
    I m pretty new to abap.
    How can I know where the user exits or enhancement used in standard sap code?
    As i have to add some functionality to the standard sap code. I m looking to search the enhancement or user exits used in this standard code wher i can add my functionality.
    thanks in advance.
    Moderator message : Search for available information, thread locked.
    Edited by: Vinod Kumar on Oct 19, 2011 2:38 PM

    Hi Henry,
    I don't think this is the easiest way to look at the code around a particular field on the screen. Debugging standard programs also can be very tedious, if not impossbile. So, instead of this question, I would like to find out exactly what you want to do if you know the code.
    If you are in a transaction and you want to know where the code of a particular field is, the fastest way to get to it is by pressing the F1 key on the field and then press the Technical info button on the help screen. In here you will typically see the same kind of information but it is very specific to the field you selected.
    PROGRAM(SCREEN) tells you which program is manipulating the main screen, in which your field is embedded. Remember your field may be included in a sub-screen and that subscreen may be the one included in the main screen.
    PROGRAM(SUB SCREEN) tells you which program is directly responsible for the field on the subscreen it is included in. This is where you should find the code most appropriate for the field, but not necessarily.
    PROGRAM(GUI) controls how your push buttons and the menu options in the screen behave and controlled.
    Srinivas

  • Change gl account in MIGO by using user exit

    Dear all,
    Could you tell me how to use user exit to change the gl account in MIGO?
    I have searched in SDN and found some code.
    In user exit: MBCF0002 ( EXIT_SAPMM07M_001 ).
    FIELD-SYMBOLS <F2> TYPE ANY."Field Symbol for the GL ACCOUNT
    DATA : W_KONTO_NAME(50) VALUE '(SAPMM07M)DM07M-KONTO'.
    ASSIGN (W_KONTO_NAME) TO <F2>.
    MOVE "GLACCOUNT" TO <F2>.
    "GLACCOUNT" is the new GL account you want to change.
    but thecode doesn't work, it can not change the BSEG-HKONT.
    Could you help me solve this problem?
    Many thanks
    Message was edited by:
            Chen Zhonghua

    USER EXIT
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sapgenie.com/abap/code/abap26.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    http://www.easymarketplace.de/userexit.php
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sappoint.com/abap/userexit.pdfUser-Exit
    http://www.sap-img.com/ab038.htm
    http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
    Transaction Code - MIGO                     Goods Movement
    Exit Name           Description
    MBCF0002            Customer function exit: Segment text in material doc. item
    MBCF0005            Material document item for goods receipt/issue slip
    MBCF0006            Customer function for WBS element
    MBCF0007            Customer function exit: Updating a reservation
    MBCF0009            Filling the storage location field
    MBCF0010            Customer exit: Create reservation BAPI_RESERVATION_CREATE1
    MBCF0011            Read from RESB and RKPF for print list in  MB26
    MB_CF001            Customer Function Exit in the Case of Updating a Mat. Doc.
    No of Exits:          8
    Rewards if useful.........
    Minal

  • User Exit to be used in Substitution

    Hello,
    We have recently got an requirement from one of the clients as they want to copy the material description to the GL text field (against Doc Type WA & WE) . I am able to find that this can be achieved by way of creating substitution, but I wander which user exit to be used for this purpose.
    Its been my experience that when ever a question of user exit arise I go blank as which user exit to be used, where will I get all this information with clear update motioning the purpose or use of each SAP delivered user exit.
    I have tried goggling it out but I was not able to find much use full  stuff. Please share your expertise.
    Thanks a ton in advance,
    Regards,
    Shilpa

    Hi Shilpa,
    there is no hard code rule to use the specific user exit for substitutions, attached screen shots will help you to resolve the issue.
    Step 1: Go to the t.code: OKC9, specify the controlling area and event 0001.
    Step 2 :  Create the substitution and select the step (attachment 1)
    Step 3: below mentioned screen shot specify the any existing user exit (naming conversion starts with U) by F4 option and double click on the particular exit
    Step 4: you can see the Report ZGGBS800, here you can create the user exit next free number starts with U naming conversion, once it's created the replace the existing user exit in the substitution rule.
    Hope this will help you to understand the user exit process in substitution rule.
    Note: Only substitution rules there is no hand code rule for user exit, for other transactions we need to check the SAP delivered exits.
    Make sure that substitution rule must be activated once exit created
    Thanks & Regards
    Srinu

  • How to update old records of LIPS used user exit MV50AFZ1

    To All Experts,
    I have used User Exit MV50AFZ1 and in this user exit i updated the fields
    USEREXIT_MOVE_FIELD_TO_LIPS.
    LIPS-ETENR = VBEP-ETENR.
    Its working fine for new VL0N1 t-code, but what about old recods of LIPS table ?
    How to update old records ? Pl. guide me.
    Yusuf

    Hi Yusuf,
    See SAP Note 415716 - User exits in delivery processing, it explain how these userexits work and cautions that you must have.
    Regards
    Eduardo

  • What User Exit can I use to add a cust field to PO Item overview in ME23n?

    Hi,
    I need help!
    Does anyone have any examples of adding a new cust field to PO Item Detail screen with a user exit?
    In transactions ME21n, ME22n, ME23n I need to add a new field in PO Item overview (screen 1211 of SAPLMEGUI). The new field ZZUNSPSC, has been appended to table EKPO as a 30 char field, which will be enterable/changeable on the ME21n, ME22n screens and display only on ME23n.
    Which user exit I can use for the purpose of adding a new input/output field to the PO item overview on SAPLMEGUI screen 1211?
    We are on release SAP ERP Central Component 5.0

    Hi,
    Thank you for the response.  I tried this and found  Badi ME_PROCESS_PO_CUST.  Do you have any examples of adding a new cust field to PO Item overview screen using badi ME_PROCESS_PO_CUST? I have had little experience creating badi's, and would appreciate very much some sample code if possible.
    In transactions ME21n, ME22n, ME23n I need to add a new field in PO Item overview (screen 1211 of SAPLMEGUI). The new field ZZUNSPSC, has been appended to table EKPO as a 30 char field, which will be enterable/changeable on the ME21n, ME22n screens and display only on ME23n.
    Can you tell me if method FIELDSELECTION_ITEM of badi ME_PROCESS_PO_CUST the correct one to use for the purpose of adding a new input/output field to the PO item overview on SAPLMEGUI screen 1211?
    Thank you for help - much appreciated,
    Vicki

  • What user exit should I use to...

    Hi everyone!
    I need to check if the due date or bline date of a posting to a GL line item is filled out, which user exit should I use?
    Btw, I cannot change FSG so it is not an option...
    Here is a list of FB01 user exits:
    Exit Name           Description
    F050S001            FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
    F050S002            FIDCC1: Change IDoc/do not send
    F050S003            FIDCC2: Change IDoc/do not send
    F050S004            FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
    F050S005            FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
    F050S006            FI Outgoing IDoc: Reset Clearing in FI Document
    F050S007            FIDCCH Outbox: Do not Send IDoc for Document Change
    F180A001            Balance Sheet Adjustment
    FARC0002            Additional Checks for Archiving MM Vendor Master Data
    FEDI0001            Function exits for EDI in FI
    RFAVIS01            Customer Exit for Changing Payment Advice Note Segmnt Texts
    RFEPOS00            Line item display: Checking of selection conditions
    RFKORIEX            Automatic Correspondence
    SAPLF051            Workflow for FI (Pre-Capture, Release for Payment)
    Thanks a lot!

    hi Ricardo,
    I think you just have to set up a validation, you don't need an exit for that. You can do that in GGB0. On the other hand due date as field does not exist, so don't look for that
    hope this helps
    ec

  • Can i use user exits

    Hi,
    Can anybody tell me if i can use user exits for not applying cost centre fields for Assets and liabilites gl a/c when we post transcations in fb60 0r fb50 f-22 etc
    warm regards
    Manjunath

    hi Manjunath,
    you can try to set up a substitution and see if it is working. On the other hand P/L accounts must have a CO object by posting, of course cost center is just one option.
    ec

  • MIRO using user exit  EXIT_SAPLFYTX_USER_001

    We are using user exit EXIT_SAPLFYTX_USER_001 for both ME21N and
    MIRO.  ME21N works fine in that we added an item number field to I_INPUT_USER  and it populates with the current item number on the po so we are able to get the gl account from EKKN.  The problem is for tcode
    MIRO.  The data in the I_INPUT_USER is all header data.  There is no material number, qty, item number, etc.  So we cannot go back to the po/item to get the gl account number to pass to vertex.  I used note 302998 to try and add fields EVRPT and EVRTN to the  I_INPUT_USER but they are not populated and when I look at KOMP those fields are also blank there. 
    For MIRO the I_INPUT_USER-KPOSN always has a value of 999999 where for ME21N it has the actual item that it is processing on the po.  I have looked and tried multiple OSS notes and nothing seems to work.  It seems that the MIRO transaction will only pass header data to vertex.  Any help is greatly appreciated!!!! thanks  - deb

    Martha - I did have an OSS note out there but I found the solution for us.
    To get the line item info in I_INPUT_USER and I_TAX_ITEM_INPUT for MIRO we had to go to transaction OBCO and turn on line item processing for our external tax system.  As for your question  - the header information should be in I_TAX_ITEM_INPUT and in I_TAX_HEADER_INPUT.  the I_INPUT_USER is for users to add their own fields that are currently in KOMP.  Look at OSS note 302998 it explains how to extend the I_INPUT_USER  and how to export and import data that you might need.  If this note does not help - go to OSS and do a search on EXIT_SAPLFYTX_USER_001 and some of the other notes should help you. thanks - deb

  • How to use User exit for MM_MATBEL

    Hi
    I want to exclude some material documents while archiving a range of material document through archive Object MM_MATBEL.
    Can you please suggest how to use user exit for this to exclude the material document while archiving.
    Please brief me details.
    Thanks,
    Debadatta

    Hi Debadatta,
    Welcome to SDN.
    Have you looked report program <b>RM07MAAU</b> (Report for Material Document Archiving)?
    Hope this will help.
    Regards,
    Ferry Lianto

  • Which user exit can be use before production order creating?

    which user exit can be use before production order creating?
    i want to check AFPO data,then show error message before production order creating.
    1.i try to use PPCO0001( enhancement when saving the order) to check AFPO data, then show some error message,sap system will generate a abap down error.
    2.i try to use PPCO0007(Exit when saving production order),
    i can show error message,but i can't check AFPO's data.

    Hi,
    You can access AFPOD structure using field symbols.
    Try below mentioned code in routing:
    constants: c_afpod TYPE char30 VALUE '(SAPLCOKO1)AFPOD' .
    FIELD-SYMBOLS: <fs_afpod> TYPE ANY .
    data: wa_afpod TYPE afpod.
    ASSIGN (c_afpod) TO <fs_afpod>.
    wa_afpod = <fs_afpod>.
    Then later you can use wa_afpod in exit PPCO0007. Hope this will work for you.
    Sumit

  • Can I use User Exit u2013 IWOC0004 u2013 Change Single-Level List for TCODE IW37N?

    Hi All,
    Can I use User Exit u2013 IWOC0004 u2013 Change Single-Level List for TCODE IW37N?
    In documentation of the User Exit I can see that I  can use this user Exit for IW37(Program - RIAFVC20) , but I want to use this for IW37N (RIH_ORDER_OPERATION_LIST).
    Please tell me is it possible.
    With best regards,
    Narendra

    Hi Pete Sir,
           I am on 4.7 , how to work with it. I am going to use screen exit IW0110018 and I want to add User fields in the IW37N.
    Thanks with best regards,
    Narendra

  • Any user exit could be used in SAPMV60A(TCODE:VF01)?

    I want to use user exit to change accounting doc. upon generating accounting doc. upon save in VF01..
      wait online

    V61A0001                                Customer enhancement: Pricing                           
    V60P0001                                Data provision for additional fields for display in lists
    V60A0001                                Customer functions in the billing document              
    V05N0001                                User Exits for Printing Billing Docs. using POR Procedure
    V05I0001                                User exits for billing index                            
    SDVFX011                                Userexit for the komkcv- and kompcv-structures          
    SDVFX010                                User exit item table for the customer lines             
    SDVFX009                                Billing doc. processing KIDONO (payment reference number)
    SDVFX008                                User exit: Processing of transfer structures SD-FI      
    SDVFX007                                User exit: Billing plan during transfer to Accounting

  • BADI/user exit to be used EIPO-TEXT1 field of the outbound delivery line item?

    Hi ABAPERS,
    Need some help on an enhancement with reference to outbound delivery in SCM module.I have a requirement for an enhancement to ensure that the License Check is performed for each Delivery Item based on the Material`s Export Control Parameters and updating the license number identified against each of the line item in the outbound delivery in a predetermined field.
    Basically, Using enhancement, find the appropriate License based on the information fetched from the Delivery Document and check if this is matching with the available License Information. Then the appropriate License fetched should be visible in the License Log of the Delivery Document.
    The valid License No. fetched should be updated at the Delivery Document Item – Foreign Trade – Comments Tab-Description Field 1.(ie. populate the license T606Z-GENNR in EIPO-TEXT1 field of the outbound delivery line item.).
    Could you please advise on the BADI/user exit to be used in this case. Request your inputs.

    I found the solution myself. I was actually not needing a user-exit to do this. I just simply solved it by using function modules READ_TEXT and SAVE_TEXT in a customer program.
    Regards.

Maybe you are looking for