Using viGpibCommand and CIC errors

Dear all,
My hardware is an NI GPIB-USB-HS interface, connected to a windows 7 machine. I have two GPIB devices connected for testing.
I am trying to send low-level GPIB commands using viGpibCommand. The reason I need to do this is because I want to implement a GET trigger with multiple listeners. This cannot be accomplished with the viAssertTrigger() functionality, as far as I am aware.
However, when I try to send commands using viGpibCommand(), I get "VI_ERROR_NCIC: the interface associated with this session is not currently the controller in charge".
Indeed, the VI_ATTR_GPIB_CIC_STATE attribute of the session to my "GPIB::INTFC" controller shows 0 (not in control). It is the system controller though (VI_ATTR_GPIB_SYS_CNTRL_STATE shows 1).
My question is: what do I need to do to be able to send raw commands using viGpibCommand?

I think I found it: I need viGpibSendIFC() to become CIC.

Similar Messages

Assets transfer using ABUMN and getting error already retired.

Hi AA Gurus
I have two assets and want to move to sub assets of another asset.e.g asset 201,202 to be transfered to 203-1,203-2.
I created sub asset using AS11.I am transferring to sub assets using ABUMN. I get ever time error as "Transaction on asset 123 203-1 not possible, retirement already in document ". This asset is not retired. So I created 2 assets fresh ( doc date ,acqusition date of today to experiment ) and then created a sub asset using As11. When I tried ABUMN for transferring it came up with
same message retirement not possible ,retirement already in doc. What is happening here ? I have checked the asset using as03 and don't see as retired ( i just created the asset ). Kindly give me some idea how to transfer two assets to sub assets of another asset.
I have checked other similar question on forum but solution did not work for me.Kindly give me some idea why this error keep coming even though asset is not retired and created today itself to test ABUMN.
Thanks in advance
Satya

Bernhard
Here are my observation and question in itlaic .Kindly suggest me what should be done.
Please go to Financial Accounting -> Asset Accounting -> Master data -> Specific Time-Independent Management of Organizational Units
Not checked for any co code.
If you set this indicator, the system manages the organizational units 'business area' and 'cost center' (and thereby 'profit center') as not time dependent in the asset master records in this company code.
Any change to these organizational units during master data maintenance then automatically generates a transfer posting document.
If the indicator is not set, you have to create a new asset master record, and manually transfer the entire asset, when the business area changes (and you are using business area balance sheets).
I am doing it manually only.I don't think that there is organizationla units change is invloved.I have two assets and I am transferring it as two sub assets of a new asset ( created for this purpose only ).All the assets are of same class.
Also, please go to Asset accounting -> Integration with GL -> Post depreciation to General Ledger -> ... -> Activate account assignment objects
Please check if assignment object KOSTL has field "BalSh" ticked.
No it is not ticked. Other two active and agreement are ticked.
Account assignment objects that are relevant to the balance sheet can no longer be changed directly in the asset master record once the asset has been capitalized. Instead, such assets have to be transferred to a new asset master record to make this change.

Download older version of a file from SharePoint Document Library using CSOM and 404 error

Hi,
I am trying to download previous versions including Major and Minor versions of documents from SharePoint Online using CSOM. I get 404 error when I try to download the file. I found several posts on various discussion forums where people are getting same
error but none of those have any solution/answer. Below is one of the threads and sample code I have tried that results in 404 error. If I use the link in browser directly, I am able to download the file. Also I am able to download the current version of file
using CSOM without any problem, it is only the older versions that give me 404 in CSOM.
http://qandasys.info/how-to-download-the-historical-file-version-content-using-csom/
public int GetStreamFromFile(string docid, string lib, string fileurl, ClientContext clientContext, int iuserid, string Version, bool isCurrrent)
if(!isCurrent)
List LibraryName = clientContext.Web.Lists.GetByTitle(lib);
clientContext.Load(LibraryName);
clientContext.ExecuteQuery();
CamlQuery camlQuery = new CamlQuery();
camlQuery.ViewXml = "" + fileurl +
Microsoft.SharePoint.Client.ListItemCollection collListItem = LibraryName.GetItems(camlQuery);
clientContext.Load(collListItem, items => items.Include(item => item.Id, item => item["FileLeafRef"], item => item["LinkFilename"],
item => item["FileRef"], item => item["File_x0020_Size"], item => item["DocIcon"], item => item.File.Versions));
//clientContext.Load(collListItem);
clientContext.ExecuteQuery();
foreach (Microsoft.SharePoint.Client.ListItem oListItem in collListItem)
//string fileurl1 = (string)oListItem["FileRef"];
//string filename = (string)oListItem["LinkFilename"];
foreach (FileVersion version in oListItem.File.Versions)
if (Version == version.VersionLabel)
//Added excutequery to get object one more time as per blog
//http://social.technet.microsoft.com/Forums/de-DE/sharepointdevelopmentprevious/thread/88a05256-8694-4e40-863d-6c77512e079b
clientContext.ExecuteQuery();
FileInformation fileInformation = ClientOM.File.OpenBinaryDirect(clientContext,version.Url);
bytesarr = ReadFully(fileInformation.Stream);
Darwaish

Hi,
According to your description,
I know you want to get older version of a file from SharePoint Document Library using Client Object Model.
The following code snippet for your reference:
public void GetVersions()
ClientContext clientContext = new ClientContext(“http://SPSite”);
Web site = clientContext.Web;
clientContext.Load(site);
clientContext.ExecuteQuery();
File file = site.GetFileByServerRelativeUrl(“/Shared Documents/mydocument.doc”);
clientContext.Load(file);
clientContext.ExecuteQuery();
ListItem currentItem = file.ListItemAllFields;
clientContext.Load(currentItem);
clientContext.ExecuteQuery();
FileVersionCollection versions = file.Versions;
clientContext.Load(versions);
clientContext.ExecuteQuery();
if (versions != null)
foreach(FileVersion _version in versions)
Console.WriteLine(“Version : {0}”,_version.VersionLabel);
More information:
http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.client.file.versions.aspx
Best Regards,
Dennis Guo

I used the Adobe v1 pro for the free trial. I purchased the month to month plan just now and I go to use it and the error message pops up whn I try to use it, over and over and over...now it won't even open without the stupis error message. Not happy with

I buy the program and now it doesn't open woith out an error message

What is "Adobe v1"?
What is the error message?
What is your operating system?

Error while accessing a library using content and structure

I have a library having document and folder inside it. When I open the library using content and structure I get an error with a correlation ID. When checked the the logs with Correlation ID got an error message "View 'All Document' does not exist."
'All Document' is name of default view on the library.
When I open the library from view all site content the library is being opened.
Please help!!!

Hello Victoria,
Thanks for the response.
I have tried troubleshooting steps given by you.
Check if the issue occurs with other users. Use another user to access the library in Content and Structure and then compare the results. --
I tried with different users but no luck
Make sure that the user account with issue has permission to view the All Documents view of the library. --
Yes, user Account have the permission
Check if the issue occurs with other libraries in the Content and Structure. If not, I recommend to save the library as
a template including contents and then create a new library based on this template. After that use the new library instead of the old library. --
No other library have this problem. I cannot save the library as template including the contents as the it has many folders and files. The current size of library is 786 MB
Clear cache in the browser or use another browser to see if the issue still occurs. --
tries but issue persists.
Best regards,
Ratnesh

Hi, I am using HP11 and iPlanet web server. When trying to upload files over HTTP using FORM ENCTYPE="multipart/form-data" that are bigger than a few Kilobytes i get a 408 error. (client timeout).

Hi, I am using HP11 and iPlanet web server. When trying to upload files over HTTP using FORM ENCTYPE="multipart/form-data" that are bigger than a few Kilobytes i get a 408 error. (client timeout). It is as if the server has decided that the client has timed out during the file upload. The default setting is 30 seconds for AcceptTimeout in the magnus.conf file. This should be ample to get the file across, even increasing this to 2 minutes just produces the same error after 2 minutes. Any help appreciated. Apologies if this is not the correct forum for this, I couldn't see one for iPlanet and Web, many thanks, Kieran.

Hi,
You didnt mention which version of IWS. follow these steps.
(1)Goto Web Server Administration Server, select the server you want to manage.
(2)Select Preference >> Perfomance Tuning.
(3)set HTTP Persistent Connection Timeout to your choice (eg 180 sec for three minutes)
(4) Apply changes and restart the server.
*Setting the timeout to a lower value, however, may prevent the transfer of large files as timeout does not refer to the time that the connection has been idle. For example, if you are using a 2400 baud modem, and the request timeout is set to 180 seconds, then the maximum file size that can be transferred before the connection is closed is 432000 bits (2400 multiplied by 180)
Regards
T.Raghulan
[email protected]

Hi, i'm new using numbers, and when I try to open a excel file don't let me do it, instead appears a box whit a error and close app, any help?

Hi, i'm new using numbers, and when I try to open a excel file don't let me do it, instead appears a box whit a error and close app, any help?

What does the error say?
A couple of thoughts: the file is corrupted or is password-protected. Corruption is more likely to cause Numbers to crash & Numbers cannot open password-protected Excel files. Try using one of the free Office clones & see what happens.

Error while uploading stock using Mb1c and migo

Hi
Following error is showing,while uploading stock using Mb1c and migo
Return code 8 is not permitted with BAdI 'FAGL_PERIOD_CHECK'
Can anyone help me?/
Thanks

Hi
You will need the help of an abaper in solving this , as a BAdi FAGL_PERIOD_CHECK - Posting Period Check has been activated.
Please check the implementation of the BAdi , i feel that it has not been implemented properly.
This Business Add-In (BAdI) enables you to extend the existing check of open posting periods.
The result of the period check is provided to you as a parameter (CH_SUBRC). In your implementation, you can derive this parameter again (for example, if a posting is rejected under a certain condition).
The following values are allowed for parameter CH_SUBRC:
0 Posting allowed
4 Period & is not open for account type & and general ledger &
6 No authorization for posting period & &
This is a custome developemnt , so only the ABAper present at your end will be able to resolve it.
Thanks & Regards
Kishore

Error while using REMAP_TABLE and WHERE clause together in IMPDP

I am trying to move some records from a very large table to another small table.
I am facing trouble while using REMAP_TABLE and WHERE clause together in IMPDP.
Problem is data filter is not getting applied and all records are getting imported.
here is how I have simulated this. please advice.
CREATE TABLE TSHARRHB.TMP1
A NUMBER,
B NUMBER
begin
Insert into TSHARRHB.TMP1
   (A, B)
Values
   (1, 1);
Insert into TSHARRHB.TMP1
   (A, B)
Values
   (2, 2);
COMMIT;
end;
expdp system/password TABLES=tsharrhb.TMP1 DIRECTORY=GRDP_EXP_DIR DUMPFILE=TMP1.dmp REUSE_DUMPFILES=YES LOGFILE=EXP.log PARALLEL=8
impdp system/password DIRECTORY=GRDP_EXP_DIR DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY='TSHARRHB.TMP1:"WHERE TMP1.A = 2"' REMAP_TABLE=TSHARRHB.TMP1:TMP3 CONTENT=DATA_ONLY
Import: Release 11.2.0.1.0 - Production on Fri Dec 13 05:13:30 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, Automatic Storage Management, OLAP, Data Mining
and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/********@GRD6.RBSG DIRECTORY=GRDP_EXP_DIR DUMPFILE=TMP1.dmp LOGFILE=SSD_93_TABLES_FULL_EXP.log PARALLEL=8 QUERY=TSHARRHB.TMP1:"WHERE TMP1.A = 2" REMAP_TABLE=TSHARRHB.TMP1:TMP3 CONTENT=DATA_ONLY
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
. . imported "TSHARRHB"."TMP3"                           5.421 KB       2 rows
Job "SYSTEM"."SYS_IMPORT_FULL_01" successfully completed at 05:13:33
here I am expecting only 1 record to get imported but both the records are getting imported. please advice.

The strange thing compared to your output is that I get an error when I have table prefix in the query block:
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/******** DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY=SYSADM.TMP1:"WHERE TMP1.A = 2" REMAP_TABLE=SYSADM.TMP1:TMP3 CONTENT=DATA_ONLY
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
ORA-31693: Table data object "SYSADM"."TMP3" failed to load/unload and is being skipped due to error:
ORA-38500: Unsupported operation: Oracle XML DB not present
Job "SYSTEM"."SYS_IMPORT_FULL_01" completed with 1 error(s) at Fri Dec 13 10:39:11 2013 elapsed 0 00:00:03
And if I remove it, it works:
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/******** DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY=SYSADM.TMP1:"WHERE A = 2" REMAP_TABLE=SYSADM.TMP1:TMP3 CONTENT=DATA_ONLY
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
. . imported "SYSADM"."TMP3"                             5.406 KB       1 out of 2 rows
Job "SYSTEM"."SYS_IMPORT_FULL_01" successfully completed at Fri Dec 13 10:36:50 2013 elapsed 0 00:00:01
Nicolas.
PS: as you can see, I'm on 11.2.0.4, I do not have 11.2.0.1 that you seem to use.

Hi, l authorized my computer using iTunes and it said successful, but when l start syncing my applications l get this error: "The iPhone "My name" could not be synced because this computer is no longer authorized for purchased items that are on this phone

hi, l authorized my computer using iTunes and it said successful, but when l start syncing my applications l get this error: "The iPhone "My name" could not be synced because this computer is no longer authorized for purchased items that are on this phone".
May you help
Thanks

Try TS1389: iTunes repeatedly prompts to authorize computer to play iTunes Store purchases.
tt2

Error message when importing data using Import and export wizard

Getting below error message when importing data using IMPORT and EXPORT WIZARD
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
<dir>
<dir>
Messages
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'.
Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.".
(SQL Server Import and Export Wizard)
Error 0xc0209029: Data Flow Task 1: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "Destination - Buyer_.Inputs[Destination Input]" failed because error code 0xC020907B occurred, and the error row disposition on "Destination
- Buyer_First_Qtr.Inputs[Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Error 0xc0047022: Data Flow Task 1: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - Buyer" (28) failed with error code 0xC0209029 while processing input "Destination Input" (41). The
identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information
about the failure.
(SQL Server Import and Export Wizard)
Error 0xc02020c4: Data Flow Task 1: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
(SQL Server Import and Export Wizard)
</dir>
</dir>
Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on Source - Buyer_First_Qtr returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Smash126

Hi Smash126,
Based on the error message” Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'. Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting
autogrowth on for existing files in the filegroup”, we can know that the issue is caused by the there is no sufficient disk space in filegroup 'PRIMARY' for the ‘REPORTING’ database.
To fix this issue, we can add additional files to the filegroup by add a new file to the PRIMARY filegroup on Files page, or setting Autogrowth on for existing files in the filegroup to increase the necessary space.
The following document about Add Data or Log Files to a Database is for your reference:
http://msdn.microsoft.com/en-us/library/ms189253.aspx
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Error message on iPad using safari and iMessage/ FaceTime.

I'm having trouble with my iPad (3). Just recently I keep getting the same error message when searching using safari, it says cannot open page as too many redirects occurred. I've tried closing all tabs, clearing the history and clearing cookies and data but nothing is working. I can still use google and use my Facebook and Twitter apps. Also since clearing data, I have been logged out of iMessage and FaceTime, when I try and log back in again it says that an error occurred during activation. What's wrong with my iPad?! I updated my iOS software a few weeks ago so I assumed that couldn't be the problem. Please help!

You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Try again to see if the problem persists.

I previously downloaded the AI 30 day trial but was able to use it before the trial ran out I've since deleted it from my laptop (Windows 7 64 bit OS) How do I get it back? Trying to download AI again and getting error code 3 some thing to do with adminis

I previously downloaded the AI 30 day trial but was able to use it before the trial ran out I've since deleted it from my laptop (Windows 7 64 bit OS) How do I get it back? Trying to download AI again and getting error code 3 some thing to do with administration permissions?

If your intention is to use the trial again it will not reset if you reinstall. It will remain in its ran out state.

I lost my connection when I was using internet and when I want to reconnect to airport it give me connection timeout error, I changed my password on router but still doesn't work. How can i fix my problem?

Hi,
I lost my airport connection when I was using internet and when I wanted to re-reconnect to airport it gave me connection timeout error, I changed my password on router but still doesn't work. How can i fix my problem?

Hello there hastibahreini,
It sounds like you were using your Wi-Fi network from your Airport base station and the connection cut out. You have reset the password on the device but the issue persists. I would try the 3 resets outlined in the following article in order to help resolve the issue. If it persists, is the Wi-Fi connection issue happening on more than one device or computer?
Resetting an AirPort base station FAQ
http://support.apple.com/kb/ht3728
Thank you for using Apple Support Communities.
Cheers,
Sterling

I own acrobat 9 pro and had to re-download the program from a computer issue but when i get the serial code from the adobe website it give me serial code invalid error. i am using copy and paste to prevent miss typing the code.

i own acrobat 9 pro and had to re-download the program from a computer issue but when i get the serial code from the adobe website it give me serial code invalid error. i am using copy and paste to prevent miss typing the code.

Hi Lawrence,
Please try the steps mentioned in the KB: https://helpx.adobe.com/creative-suite/kb/error-invalid-serial-number-acrobat.html
Regards,
Rave

Using viGpibCommand and CIC errors

Similar Messages

Maybe you are looking for