Using XLST in the XML output returned.

I have written a SQL (using 10G) which creates an XML document using the XML syntax and the output
is as follows:
<?xml version="1.0" encoding="UTF-8"?>
<FIXML xmlns="http://www.fixprotocol.org/FIXML-4-4"><Order Acct="1" Px="480.25"
SettlDt="2009-12-01" SettlTyp="0" Side="1" StopPx="480.25" Typ="2">
<TrdSes SesID="0"/><Instrmt CpnRt="5.1" EncIssrLen="2" ID="3134865" Issr="Barclays"
MMY="200903" Mult="1.0" OptAt="L" SecTyp="BA" Sfx="P" Src="2" />
</Order></FIXML>I need to use XSLT to convert the above XML in the format attached below.
- <i:Interest >
<i:OrderAct>1</i:OrderAct>
<i:StopPx>480.25</i:StopPx>
<i:Issr>Barclays</i:Issr>
<i:Ref />
</i:Interest>i know that this is not the forum to ask XSLT,but as I am using 10G with SQL,can anyone
just send in a small XSLT script which I can use as a template and create XSLT.
This is the first time I am using XSLT.
Again,no offence meant if this is not the correct forum but help really appreciated.
Thanks,

What's wrong with Sundars answer in this Writing a Procedure to return back XML. Please help.?

Similar Messages

How to send job postings to multiple third party sites using the XML output

Dear Friends,
We are Implementing Irecruitment for our client, Client requirement is how can we send job postings to multiple third party sites using the XML output from i-Recruitment
With regards
Surya
.

Can you be more specific about your Requirement. In General, Please navigate to iRecruitment Recruiter Responisbility.
Then Select, Setup > Recruiting Sites. Here, you can configure your Third Party Websites information and attach stylesheets. The default mode oracle sends the vacancy information is HR-XML Format.
If you would like to select more sites information select "Add Another Row".
Then, you can see this information while "New Vacancy Creation Process".
iRecruiter.
Edited by: iRecruiter on Oct 18, 2009 7:43 AM

When running an xml publisher report the xml output leads to 9 mb and the excel output file leads to 20 mb.But the output records is originally 4000 records. When copy to new excel it is showing 3.5 mb only. Does anyone knows the answer for this issue?

When running an xml publisher report the xml output leads to 9 mb and the excel output file leads to 20 mb. The records contained in excel file is 4000 records. When taking the excel records and copy to new excel file the excel file size is 3.5 mb only.Why does the oracle software generates 20mb file?
Does any one knows the answer please advice?

Hello,
This issue is because the Excel output from BI Publisher is MHTML (XML Publisher generates XHTML) not binary .xls.
MHTML and XHTML are more verbose formats than binary .xls.
It will be large because the current Excel output is just an HTML and not compressed like PDF. Please use the workaround (save it as .xls file). This is a known limitation of RTF layout templates.
BI Publisher Enterprise has a new feature True Excel Templates. The layouts generate binary Excel output.
Excel Output File Size Generated By BI Publisher is Very Large (Doc ID 760437.1)
Bogdan

How to create a errortag in the XML-Output ?

Hey
who can help me creating a error-tag in my XML-output of a PL/SQL procedure ?
Enviroment:
Oracle DB is 8.1.7 with installed XDK-package (in a few
weeks perhaps Oracle 9i). I've no problems to use the dbms_xmlquery-functions and -procedures.
I've to develop a PL/SQL procedure which is called via JDBC from a JAVA program. The procedure execute a Select-Statement. The result is transformed in XML and stored in a CLOB, which is given back to the calling JAVA-program.
There exist 2 possible result-situations.
-1- one or more rows are found
-2- no row is found
Problem:
For each of these situation the XML-Output should have a different structure and my main problem is to integrate the errortag !!!
for -1-
<?xml version="1.0" encoding="ISO-8859-1"?>
<data>
<error err_code="NoError"/>
<record num="1">
</record>
<record num="2">
</record>
</data>
for -2-
<?xml version="1.0" encoding="ISO-8859-1"?>
<data>
<error err_code="NoDataFound"/>
</data>
Hope somebody can help me ???
Andre

Hey Rajat,
thanks for your answer, but the errortag is needed by another department. They use it for their processing.
Have you got any idea, how to integrate the errortag with the functions or procedures of the dbms_xmlquery package ??? I've got only a few days experience with the dbms_xmlquery-package, so some code examples or advices would be great !!!
I've tried the following coding:
out_xmlresult OUT CLOB; -- OUT Parameter of the PLSQL-Proc
c1 CLOB;
queryctx dbms_xmlquery.ctxtype;
-- create XML-context
queryctx:=dbms_xmlquery.newcontext(<selectstatement>);
-- delete the rowsettag (use 'data' later on)
dbms_xmlquery.setrowsettag(queryctx,'');
-- create new tag 'data' which enclose an empty header
-- and the data section
dbms_lob.createTemporary(c1, TRUE );
c1:=EMPTY_CLOB();
dbms_xmlquery.setDataHeader(queryctx,c1,'data');
-- rename rowtag
dbms_xmlquery.setrowtag(queryctx,'record');
-- set encoding tag
dbms_xmlquery.setEncodingTag(queryctx,'ISO-8859-1);
-- create XML-Output
out_xmlresult := dbms_xmlquery.getxml(queryctx);
...but I haven't got any success !!!
Andre

Is there a way to remove the index from the XML output?

Hi,
It is easy to remove the index from the WebHelp output.
We also want to remove it from the XML output.
How do I do that?
Thanks,
Rakefet

@Jeff: In the Single Source Layouts recipe box is a layout for XML. Although, I'm really not sure why folks would use it, other than to possibly export the project data to another system of some sort.
@Rakefet: One thought is to try creating a new blank Index. Then choose the empty Index when you use XML Output.
Cheers... Rick

Need to reference file name within the XML Output

Not sure if this is possible, as I'm new to the livecycle/XML world. But I need to be able to reference a file within the XML output from the PDF.
The Scenario is that a pdf form of a business card will be issued to 50 franchisees for them to type in their names and mobiles, click submit and the XML file to be sent to myself, and be imported in to InDesign populating their data ready for printing. Up to here I have it working perfectly.
However as each franchisee have a combination of up to 5 logos to place in the bottom corner to save having to have various templates with different combinations of logos and having to ensure the correct templates are used. I intend to reference each companies combination as an EPS and make the reference within the xml out and have it import directly in with the other data. I can type the code directly within the xml but I would like to have the form reference it directly in the xml output. Is this possible or am expecting to much of livecycle? Any help/advice greatly appreciated.
David

Hi MadhavaGanji,
I have post how to validate the file name, header row against definition table which stored the file name and column definition.
Take a look and see if this is helpful.
http://sqlage.blogspot.com/2013/11/ssis-validate-file-header-against.html
http://sqlage.blogspot.com/

Regarding the rowset and row tags in the XML output

Hi,
We generated an XML file using dataset of type SQL query.The output is including additional tags
<ROWSET> and <ROW> tags.How to disable them from appearing in the XML output.

Hi,
Iam not using the Datamodel of data template type.If we use the data template we can disable the rowtags by setting the property mentioned by you.But we get the data template name and the query name included in the output.My requirement is to disable the extratags.
Can u please provide inputs on how to disable the datatemplate name and the query name tags in the output when we use datatemplate.Thank you.

Help require to get the XML output to design template- JDE

Hi Friends,
I am asking this question from JDE perspective.I want to design XMLP Template for R40572 Check Printing.
When I upload an blank template and after attaching RD, When ever I initiate a check from P04572 Application.RThe Write Row exit will lead to check printing which in turn will call a batch R04571 and this batch will call R04572(Which I require the XML output) since it is the second report and we cant direct it to local server I am not able to get the XML output..
Another think is since its running in server i think its not taking the RD modification we done in loacl because it always fires PDF .

Hi,
I assume you're Using XMPOSA for generating the files locally. What I suggest is, you set the application to run with the report definition by default. That way, even when it is called, it will be called along with the report definition. You can take the resultant XML file from P95630
hope this helps,
-Domnic

Possible to change the xml output of the Inbound Interface?

Hi All,
I hav a scenarion where a third party system receives the XML from XI. the output of the xml from XI looks as follows:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:Messages xmllns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
- <ns1:WMSItalyItemReplication xmlns:ns1="http://cpe.com/cpe_ftp_wms/ItemReplication">
- <item_dl dt_tm_created="2006-06-29 09:02:23">
- <item action="" owner_id="CIB" itm_num="3143832ZZ99">
<itm_desc>Ageflex ACM50 Test</itm_desc>
<unt_dol_val>1</unt_dol_val>
<lic_ctrl_flg>Y</lic_ctrl_flg>
<lot_ctrl_flg>Y</lot_ctrl_flg>
<shelf_life>999</shelf_life>
<product_life>999</product_life>
<incubate_prd>0</incubate_prd>
<hold_ord_flg>N</hold_ord_flg>
<kit_type>N</kit_type>
<prelabel_flg>N</prelabel_flg>
<rcv_only_flg>N</rcv_only_flg>
<convey_flg>N</convey_flg>
<front_flip_flg>N</front_flip_flg>
<pick_shp_bp>N</pick_shp_bp>
<side_flip_flg>N</side_flip_flg>
<rotate_flg>N</rotate_flg>
<itm_udef_a />
<itm_udef_b />
<itm_udef_c>Constant1</itm_udef_c>
<itm_udef_d />
<multi_conf_flg>N</multi_conf_flg>
</item>
</item_dl>
</ns1:WMSItalyItemReplication>
</ns0:Message1>
</ns0:Messages>
And the output that the third party expects is as follows:
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE item_dl SYSTEM "http://localhost/dtd/item_dl.dtd">
<item_dl><item><itm_desc>Ageflex ACM50 Test</itm_desc>
<unt_dol_val>1</unt_dol_val>
<lic_ctrl_flg>Y</lic_ctrl_flg>
<lot_ctrl_flg>Y</lot_ctrl_flg>
<shelf_life>999</shelf_life>
<product_life>999</product_life>
<incubate_prd>0</incubate_prd>
<hold_ord_flg>N</hold_ord_flg>
<kit_type>N</kit_type>
<prelabel_flg>N</prelabel_flg>
<rcv_only_flg>N</rcv_only_flg>
<convey_flg>N</convey_flg>
<front_flip_flg>N</front_flip_flg>
<pick_shp_bp>N</pick_shp_bp>
<side_flip_flg>N</side_flip_flg>
<rotate_flg>N</rotate_flg>
<itm_udef_a></itm_udef_a>
<itm_udef_b></itm_udef_b>
<itm_udef_c>Constant1</itm_udef_c>
<itm_udef_d></itm_udef_d>
<multi_conf_flg>N</multi_conf_flg>
</item>
</item_dl>
Observe the first two lines of the second output.
I tried to generate the second xml using a java mapping. and it is working fine when i test it in the Interface mapping's test tab. but it is not working when i test the scenario end to end. It is giving some runtime error.
is it possible to change the namespace, etc in the output of the XML coming out of XI? if v change those namespace stuff, does XI recongnise the message and send it to the appropriate reciever?
Please suggest me any solution.
any help wud b greatly appreciated.

The first XML is a Split msg XML..Where there are multiple messages within a single XML document..Thats why u have a <ns0:Messages xmllns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
Tags..
Recheck what ur target system needs are & change ur mapping in XI.

Open Dataset for XML not reading the XML file, Returning Code 8.

Dear all,
Im trying to open an XML file using Open Dataset, since i have to execute this report in background and GUI_upload doesnt work in background.
The XML file is available in my C:\, say, C:\xmlfile.xml.
But the open dataset is not reading any value into the g_xml_line . it is returning sy-subrc = 8.
Below is my code for that, can anybody help me out to resolve.
DATA : lv_filename LIKE rlgrap-filename.
CLEAR: lv_filename.
lv_filename = p_input.
OPEN DATASET lv_filename FOR INPUT IN BINARY MODE.
IF sy-subrc ne 0.
    WRITE:/ 'invalid file'.
else.
DO.
    READ DATASET lv_filename INTO g_xml_line.
    IF sy-subrc EQ 0.
      APPEND g_xml_line TO g_xml_table.
    ELSE.
      EXIT.
    ENDIF.
ENDDO.
CLOSE DATASET lv_filename.
   ENDIF.
TYPES: BEGIN OF t_xml_line,
        data(256) TYPE x,
      END OF t_xml_line.
DATA: g_xml_table       TYPE TABLE OF t_xml_line,
      g_xml_line        TYPE t_xml_line,
      g_xml_table_size TYPE i.
GET REFERENCE OF gt_person INTO gs_result_xml-value.
gs_result_xml-name = 'IPIX'.
APPEND gs_result_xml TO gt_result_xml.
Perform the XSLT stylesheet
TRY.
      CALL TRANSFORMATION zaum_manh_sync_rpt
      SOURCE XML g_xml_table
      RESULT (gt_result_xml).
    CATCH cx_root INTO gs_rif_ex.
      gs_var_text = gs_rif_ex->get_text( ).
      MESSAGE gs_var_text TYPE 'E'.
ENDTRY.
Kindly suggest me a solution. Points assured
regs,
raja

After saving the file , below is the code i wrote, but it gives a runtime error with message
No roll storage space of length 3788808 available for internal storage.
***Coding****
PARAMETERS: p_file TYPE pathintern LOWER CASE DEFAULT '/usr/sap/DEV/SYS/global/XMLABAP2.XML'.
DATA : lv_filename LIKE rlgrap-filename.
CLEAR: lv_filename.
lv_filename = p_file.
DATA: l_fname TYPE filename-fileintern. " File name
*GET THE FILENAME FROM THE APPLICATION SERVER
CALL FUNCTION '/SAPDMC/LSM_F4_SERVER_FILE'
    EXPORTING
      directory        = p_file
      filemask         = '*'
    IMPORTING
      serverfile       = l_fname
    EXCEPTIONS
      canceled_by_user = 1
      OTHERS           = 2.
IF sy-subrc NE 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*/usr/sap/DEV/SYS/global/substanc
lv_filename = l_fname.
OPEN DATASET lv_filename FOR INPUT IN BINARY MODE.
IF sy-subrc NE 0.
    WRITE:/ 'invalid file'.
ELSE.
    DO.
      READ DATASET lv_filename INTO g_xml_line.
   IF sy-subrc EQ 0.
      APPEND g_xml_line TO g_xml_table.
   ELSE.
     EXIT.
   ENDIF.
    ENDDO.
    CLOSE DATASET lv_filename.
ENDIF.

** The XML output file is unreadable in SAP ECC 6.0 (Working fine in 4.6c)

Hi Friends,
I am working in SAP Technical upgrade Project from 4.6C to SAP ECC 6.0. In 4.6c one Z program is there, the output of Z program is to generate output XML file in the application Server. We checked and downloaded that the output file is readable and the XML is valid.
When we run the same program in ECC 6.0. (after unicode check & changes done), the output xml file is generated and it is in unreadable form. (XML contains some machine characters). When we open the XML in Altova Spy, it shows the error XML is invalid. The erorr is 'character #x3F3C is grammatically unexpected'.
In 4.6c, they used the encoding <?xml version="1.0" encoding="ISO-8859-1" ?> . We changed the encoding to UTF-8 in ECC 6.0 since we are doing unicode conversion. (
<?xml version="1.0" encoding="UTF-8" ?> ). After this change also, the output file is not generated correctly. It is unreadable form. (Some Machine Characters).
Friends, What could be the problem ? . Can you help me to identify this problem.
Kind regards,
Jegathees P.

I troubleshooted that, the reason is that conversion of X to C (Hexadecimal to C) in the ASSIGN statement is not working correctly in ECC 6.0. Then, we replaced the code with our custom Function Module to convert xstring to string. After this, we got the XML correctly, readable and well-formed XML.

Using XPath with the XML DOM

I have just started to use the XML DOM API. One thing I cannot see yet is an easy way to use XPath to get the value of an element.
What I would like to do is pass an XPath expression like this:
\EDIFACT\ORDERS\NAD[2]\NAD01\NAD0102
into a method, and get the value of the element returned to me.
Does anybody know if there is a method of one of the DOM interfaces that would provide that kind of functionality, or am I going to have to traverse the nodes of the DOM tree manually to do this?
BR,
Tony.

Hi Tony,
I read your posted question - I have the same problem.
I think that the method find_from_path_ns (or find_from_path) is the only "xpath"-like way to get a value.
BUT the syntax is very limited so you cannot use all good features of xpath
To traverse the nodes manually is (in my problem) unpractible - the xml-structures are different and it's horrible to traverse the tree.
I need xpaths like ' //x/y[3]/z[a='MS']' . I know, the performance is not very good but for small XML-messages fast enough
Do you have any solutions?
regards
Wolfgang Hummel

How-to use Excel for the XML file input?

Hello all,
Following our discussion with Gerhard Steinhuber on the very nice tutorial from Horst Schaude , "How to upload mass data via XML File Input" , I am starting this new discussion.
In the comments section of this previous cited tutorial, Rufat Gadirov explains how to use a generated XML from Eclipse instead of your XSD file as your source in Excel.
However, in spite of all the instructions, I am still facing the same issue in Excel when I try to save my file as XML : "The XML maps in this workbook are not exportable".
What I try to do is to create one or more Sales Orders with multiple Items in it from a XML File Input, using excel to enter data.
The part with the File input is working (if I directly upload my file to the webDAV, it creates a sales order instance with multiple items).
The only missing part is the Excel data input that I cannot make work. Any help on this matter would be greatly appreciated.
Here is my XML file that I try to use as a source in Excel before inputing data from Excel:
<?xml version="1.0" encoding="UTF-8"?>
<p:MySalesOrderUploadedIntegrationInputRequest xmlns:p="http://001365xxx-one-off.sap.com/YUUD0G3OY_" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<MessageHeader>
    <CreationDateTime>2015-03-02T12:00:00.000Z</CreationDateTime>
</MessageHeader>
    <List actionCode="01" listCompleteTransmissionIndicator="true" reconciliationPeriodCounterValue="0">
        <MySalesOrderUploaded>
          <MySalesOrderUploadedID>idvalue0</MySalesOrderUploadedID>
          <MyBuyerID schemeAgencyID="token" schemeAgencySchemeAgencyID="1" schemeID="token">token</MyBuyerID>
          <MyDateTime>2015-03-02T12:00:00.000Z</MyDateTime>
          <MyName languageCode="EN">MyName</MyName>
          <MyBillToParty schemeAgencyID="token" schemeAgencySchemeAgencyID="1" schemeAgencySchemeID="token" schemeID="token">token</MyBillToParty>
          <MyDateToBeDelivered>2001-01-01</MyDateToBeDelivered>
          <MyEmployeeResponsible schemeAgencyID="token" schemeAgencySchemeAgencyID="1" schemeAgencySchemeID="token" schemeID="token">token</MyEmployeeResponsible>
          <MySalesUnit schemeAgencyID="token" schemeAgencySchemeAgencyID="1" schemeAgencySchemeID="token" schemeID="token">token</MySalesUnit>
            <MyItem>
                <MyItemID>token</MyItemID>
                <MyItemProductID schemeAgencyID="token" schemeID="token">token</MyItemProductID>
                <MyItemDescription languageCode="EN">MyItemDescription</MyItemDescription>
                <MyProductTypeCode>token</MyProductTypeCode>
                <MyRequestedQuantity unitCode="token">0.0</MyRequestedQuantity>
                <MyConfirmedQuantity unitCode="token">0.0</MyConfirmedQuantity>
                <MyNetAmount currencyCode="token">0.0</MyNetAmount>
            </MyItem>
        </MySalesOrderUploaded>
        <MySalesOrderUploaded>
          <MySalesOrderUploadedID>idvalue0</MySalesOrderUploadedID>
          <MyBuyerID schemeAgencyID="token" schemeAgencySchemeAgencyID="1" schemeID="token">token</MyBuyerID>
          <MyDateTime>2015-03-02T12:00:00.000Z</MyDateTime>
          <MyName languageCode="EN">MyName</MyName>
          <MyBillToParty schemeAgencyID="token" schemeAgencySchemeAgencyID="1" schemeAgencySchemeID="token" schemeID="token">token</MyBillToParty>
          <MyDateToBeDelivered>2001-01-01</MyDateToBeDelivered>
          <MyEmployeeResponsible schemeAgencyID="token" schemeAgencySchemeAgencyID="1" schemeAgencySchemeID="token" schemeID="token">token</MyEmployeeResponsible>
          <MySalesUnit schemeAgencyID="token" schemeAgencySchemeAgencyID="1" schemeAgencySchemeID="token" schemeID="token">token</MySalesUnit>
            <MyItem>
                <MyItemID>token</MyItemID>
                <MyItemProductID schemeAgencyID="token" schemeID="token">token</MyItemProductID>
                <MyItemDescription languageCode="EN">MyItemDescription</MyItemDescription>
                <MyProductTypeCode>token</MyProductTypeCode>
                <MyRequestedQuantity unitCode="token">0.0</MyRequestedQuantity>
                <MyConfirmedQuantity unitCode="token">0.0</MyConfirmedQuantity>
                <MyNetAmount currencyCode="token">0.0</MyNetAmount>
            </MyItem>
        </MySalesOrderUploaded>
    </List>
</p:MySalesOrderUploadedIntegrationInputRequest>
Thank you all for your attention.
Best regards.
Jacques-Antoine Ollier

Hello Jacques-Antoine,
I suppose that as you have tried to construct a map from the schema, you have taken the elements from the List level down. In this case I also can't export the map.
But if you take the elements from the level MySalesOrderUploaded down, you'll get the exportable map (screenshots)
Best regards,
Leonid Granatstein

Report will not generate PDF only the XML output. View XML icon disabled

I created a PDF format report.
When the report completes, View Output shows XML code not the PDF output.
View XML button is disabled from Diagnostic on view request screen.
Any thoughts. All settings are the same as when other XML to PDF reports are created. Not sure why this one is not working.
Thanks

I'm afraid this is not an installation issue, it rather sounds and application server one, at the operative level.
I suggest you to post your thread at the Fusion Middleware or Developer Tools forums.
You didn't provide any OS nor Oracle / AS version, I suggest you to specify this information when posting in future threads.
~ Madrid.

Not able to view the XML Output, after Output format changed to XML

Hello Everybody...
After running the concurrent program having output type of XML. Output is not getting generated.
But getting generated when output type is changed to Text.
Please find the below log file info. :
BioReliance Receivables: Version : UNKNOWN - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XXBRAXINVNEW module: XXBio Print Selected Invoices New
Current system time is 28-MAY-2009 05:31:28
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
p_order_by='TRX_NUMBER'
p_trx_number_low='9859529'
p_trx_number_high='9859529'
p_installment_number='1'
p_open_invoice='N'
p_check_for_taxyn='N'
p_choice='SEL'
p_header_pages='0'
p_debug_flag='N'
p_message_level='10'
p_userid='9092'
XML_REPORTS_XENVIRONMENT is :
/oraapps2/devukora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /oraapps2/devukora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
Spawned Process 14380
REP-3000: Internal error starting Oracle Toolkit.
MSG-00100: DEBUG: AfterPForm_Trigger +
MSG-00100: DEBUG: Multi Org established.
MSG-00100: DEBUG: AfterParam_Procs.Get_Country_Details
MSG-00100: DEBUG: AfterParam_Procs.Switch_On_Debug
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_Low
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_High
MSG-00100: DEBUG: AfterParam_Procs.Get_Tax_Option
MSG-00100: DEBUG: AfterPForm_Trigger -
MSG-00100: DEBUG: BeforeReport_Trigger +
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Printing_Option
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Tax_Printing_Option
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Message_Details
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Org_Profile.
MSG-00100: DEBUG: Organization Id: 102
MSG-00100: DEBUG: BeforeReport_Trigger.Build_Where_Clause
MSG-00100: DEBUG: P_Choice: SEL
MSG-00100: DEBUG: Choice is other than ADJ, setting ORDER BY.
MSG-00100: DEBUG: BeforeReport_Trigger -
MSG-05000: DEBUG: Trx No... 9859529
MSG-00010: 05:31 1 Transaction: 9859529
Report Builder: Release 6.0.8.25.0 - Production on Thu May 28 05:31:28 2009
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 14767798 on node RCKBLADE05 at 28-MAY-2009 05:31:36.
Post-processing of request 14767798 failed at 28-MAY-2009 05:31:36 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
------------- 2) PRINT   -------------
Finished executing request completion options.
Concurrent request completed
Current system time is 28-MAY-2009 05:31:36
Please do the needful in resolving the issue.
Thans in Advance.
Abdul.

Hello Hussein,
Thanks.
Before I could ask the DBA to chage the DIPLAY parameter, I could see error in FNDOPP*.txt file, as some issue with tag "split-by-page-break".
Accordingly I removed the tag from the template file ( RFT File). Now the request is getting Completed with Normal status. And generating the PDF output.
I found a hit in the metalink for this issue, which suggests a PATCH 4206181 (XDO.5.5) to get this functionality.
Accordingly the PATCH is applied.
Now when trying to query the template name from the XML Publisher Administrator Responsiblity, page is getting errored with the below message.
====================================================================
oracle.apps.fnd.framework.OAException: Message not found. Application: FND, Message Name: FND_VIEWOBJECT_NOT_FOUND. Tokens: VONAME = TemplateFilesForViewVO2; APPLICATION_MODULE = oracle.apps.xdo.oa.template.server.TemplatesAM;
     at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1223)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1960)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418)
     at oa_html._OA._jspService(_OA.java:86)
     at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
     at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
     at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
     at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
     at oracle.jsp.JspServlet.service(JspServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
     at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
     at org.apache.jserv.JServConnection.run(JServConnection.java:294)
     at java.lang.Thread.run(Thread.java:534)
====================================================================
Please do the needful in resolving the issue.
Thanks,
Abdul.

Using XLST in the XML output returned.

Similar Messages

Maybe you are looking for