USOBT_C almost empty after changing default values with SU24

After the implementation of OSS Notes 0001378328, 0001382895 and 0001404093 I performed a change in SU24 on the default values of authorization object (2nd tab) S_ALV_LAYO for all transactions involved.
I filtered all transactions with default value u2018Yesu2019 for this object and selected all these entries and changed them to u2018Nou2019.
When creating new roles afterwards I noticed that no objects were pulled in in PFCG and when checking table USOBT_C I noticed that, apart from the 328 records I changed to No for S_ALV_LAYO the whole table was empty! In the development client there are now just 328 records in this table whereas in de acceptance client there are 233,124 entries!
Could you please find out the following:
- How could this happen?
- What can I do to restore table USOBT_C?
I reported this bug also on OSS but maybe someone of you has had the same experience and can share the causes and solutions.
Thank you!
Lodewijk Borsboom

> > To read such a huge text in the above suggested notes may become tiresome of not ofcourse worthless.
> What is the use of posting a list of links or randon OSS note hits, when you are not sure whether they are usefull or not?
>
hmm.... though I am not sure and agree with the raise of OSS message for this issue, but when I read these notes after reading the query I found them to be notified to op.
> Lodewijk can do that simple search himself. I always assume that the person asking a question has done a search before hand...
>
Agreed again. But not sure of his search result. May be his string missed some of these notes and can help him to check the program errors rectified in couple of Notes in 2009. But of course I confess about the uncertainty of the exact solution from my side.
> If it is a basic requestion and easy answer with a link, then I delete it. It has no value to SDN. You are just attempting to do someone else's work for them, and that it not the case here.
>
> Please read the question carefully and answer specifically.
>
read and then posted the message. Also as I was not sure of solution to this particular error I surrendered in advance [mainly for you ]. Still I would like op to view the following notes on SAP Default value maintenance and if he has already done then that is great and I am just not helping with proper suggestion.
[Note 1287998 - Problems when you maintain default authorization values|https://websmp230.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=1287998]
[Note 1378328 - SU24: Error after deleting authorization default values|https://websmp230.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=1378328]
Note 1382895 - SU24|Default value maintenance for authorization objects
Note 1235912 - SU24|Display and maintenance of authorization default values|
Hi Lodewijk,
Did you check the change header for USOBT_C in CDHDR and CDPOS? Also let us updated with the reply from OSS please.
regards,
Dipanjan

Similar Messages

[svn:fx-3.x] 10868: change default value of selectable in ASDoc comment to true

Revision: 10868
Author:   [email protected]
Date:     2009-10-05 11:05:50 -0700 (Mon, 05 Oct 2009)
Log Message:
change default value of selectable in ASDoc comment to true
QE notes: -
Doc notes: -
Bugs: -
Reviewer: -
Tests run: - checkintests
Is noteworthy for integration: No
Modified Paths:
    flex/sdk/branches/3.x/frameworks/projects/framework/src/mx/controls/TextArea.as

Thank you much for your response.
I tried that and it did work. But my requirement is to have a user input the date. The basic idea is if the user decides on a predefined time range like Day Shift Today or Yesterday and so on... then the report would automatically calculate the values based on predefined date time values. On the other hand, if the intent is to run the report for an arbitrary period then the user supplies the date and time limits.
What I am trying to achieve is have the same parameter available for user input , but when the User decides he wants Predefined then the "textbox" populates with date and time as per his choice of predefind range.
I understand that by this the user can still overwrite the date and time on the text box, but the report will run the predefined values as long as he has the @PredefinedDateSelection Set to true.
Is there a way I can impement this?
Once again I thank you and appreciate your input.

Set Column Default Value with Workflow

How to set Column Default Values using a workflow.
<input alt="Mark as abusive!" id="ctl00_m_g_e11f6e6d_9b4b_42d7_97fb_486623821166_ctl12_ctl03_abuseButton_710" name="ctl00$m$g_e11f6e6d_9b4b_42d7_97fb_486623821166$ctl12$ctl03$abuseButton_710" src="http://www.sharepointforum.nl/_layouts/images/TOZIT/SharePointForums/abuse/abuse.png"
style="border-width:0px;" title="Mark as abusive!" type="image" />
15 seconds ago
After I add an item including metadata in a List, a Workflow starts to create a Library Folder with rootfolder, subfolder and sub-subfolder names based on the List first three column values.
I like that the unique created library subfolder automatically receives several additional List column values in its Column Default Value with that workflow.
After done, documents added to this subfolder are automatically populated with Metadata from the parent Subfolder.
Workflow standard function can be used to populate the folder Column Value to this but not the Column Default Value.
Does someone has a solution how to set Column
Default Value using a workflow?
I like to use such workflow in Sharepoint 2010.
Thank in advance.

Hi,
I think it cannot be achieved by workflow.

[Forum FAQ] How do I change default values shown in Report Delivery Options?

Introduction
Some users want to change default values shown in Report Delivery Options when creating standard subscriptions. Someone might want to always Cc the report to a specified user without sending the report URL. So they want to display those default values display
automatically when creating standard subscriptions like below.
Solution
To achieve this goal, please embed JavaScript code into the SubscriptionProperties.aspx file to change those default values (By default, the file’s location is: <Installation directory>\Reporting Services\ReportManager\Pages\SubcriptionProperties.aspx).
The example below will show how to set default values for “Cc” field and “Include Link” field.
Before coding, pleas find out the corresponding HTML tags of the two fields in the browser using IE Developer Tools.
Get “Cc” field with its corresponding HTML tag
Get “Include Link” field with its corresponding HTML tag
Embed such a code snippet at the end of the existing code within the SubcriptionProperties.aspx file
<script runat="server">
protected void Page_Load(object sender, EventArgs e)
Page.ClientScript.RegisterStartupScript(typeof(Page),"MyScript", "var cc = document.getElementById('CcEmailAddressesID');cc.value = '[email protected]';var IncludeLink = document.getElementById('ui_cbIncludeLink');IncludeLink.checked
= false;",true);}
</script>
Create a new subscription to check the default values shown in Report Delivery Options
Applies to
Reporting Services 2005
Reporting Services 2008
Reporting Services 2008 R2
Reporting Services 2012
Reporting Services 2014
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Thanks,
Is this a supported scenario, or does it use unsupported features?
For example, can we call exec [ReportServer].dbo.AddEvent @EventType='TimedSubscription', @EventData='b64ce7ec-d598-45cd-bbc2-ea202e0c129d'
in a supported way?
Thanks! Josh

How to change default value in a table using ALTER TABLE

Hi,
How to change default value in a table
I have a table TEST which has 2 fields CODE of Datatype VARCHAR2(10) and Indicator as VARCHAR2(1).
I want to change the default value using ALTER TABLE TEST of field Indicator to 'I'.
Any help will be needful for me
Thanks and Regards

user598986 wrote:
Hi,
How to change default value in a table
I have a table TEST which has 2 fields CODE of Datatype VARCHAR2(10) and Indicator as VARCHAR2(1).
I want to change the default value using ALTER TABLE TEST of field Indicator to 'I'.
ALTER TABLE test
MODIFY (indicator DEFAULT 'I');
Incidentally, INDICATOR is a keyword in Oracle, so you may have problems using it as a column name. If so, you'll have to enclose the column name in double-quotes, and be careful to use capital letters inside the quotes.
Edited by: Frank Kulash on Aug 26, 2009 11:42 AM

Changing default value DropDownbyindex in wdinit in view

Hi everyone, I'm using drop down by index in a view. It has many values but I want to change default value.
I think that I have to simulate an action on dropdownbykey like select a value.
Can i retrieve the index of an element of nod passing his value?
Thanks a lot.

hi ,
u can try looping into the internal table .
u must be having that dynamic value ,suppose lv_sysid, based on which u want to set the index
thn u can proceed like this :
DATA : itab_sys     TYPE STANDARD TABLE OF z2ts_systems .
*   populating internal table
    SELECT *
     FROM z2ts_systems
      APPENDING TABLE itab_sys.
DATA : lv_index type i .
    clear wa_sys.
LOOP AT itab_sys INTO wa_sys.
    IF wa_sys-SYS_ID = lv_sysid.
      lv_index = sy-tabix.
    ENDIF.
here I have compared the work area value to lv_sysid
lv_sysid is the value based on which u want to set ur index
thn u can proceed to set the lead selection to lv_index.
rgds,
amit

Change "choiseListe" values with javascript

Dear,
Is it possible to change "choiseListe" values with javascript.
Exemple il have a choseListe :
     Country //// Values
      USA            us
      France         fr
      Spain           sp
When il click in a botton i whant to change this choceListe :
     Country //// Values
      Morocco           ma
     Portugal           pt
Thanks

Hi,
Listboxes and dropdowns can be scripted against without too much difficulty.
You would need something like this in the click event of the button:
listbox1.rawValue = null; //clear previous choice
listbox1.clearItems(); //clear the list items
listbox1.addItem("Moocco", "ma"); //add new list items
listbox1.additem("Portugal", "pt");
Hope that helps,
Niall

After change Windows XP with Windows 8.1 I can't find drivers for scanning M2727 nf

after change Windows XP with Windows 8.1 I can't find drivers for scanning M2727 nf

Hi: You should be able to use most of the W7 x64 drivers and software from the HP 255 G2 on your model except the BIOS and firmware files. http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=6431940&swLangOid=8&swEnvOid=4063 Your notebook has the Realtek RTL8188EE 802.11bg/n 1x1 WiFi adapter, so that is the wireless driver you need. Additionally, you need these usb3 drivers. Install both and reboot. http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_125616_1 http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_123787_1

.INI files vs .TXT files for changing default values in a .EXE?

Hi,
I have a two-part question related to updating the default values of controls in an executable:
I am creating a LabVIEW executable for installation on two different production-floor computers.   I need to be able to change the default values of the front panel controls (as I would do with the “make this value default” command during development). From reading prior posts, I understand that I could use the “Write Configuration Settings File.vi” and “Read Configuration Settings File.vi” to generate a .INI file that would be read by the .EXE and would establish the desired values of the controls. However when I took a look at the block diagrams for those configuration .VIs, they don’t appear (to me) to be any easier to use than just reading values from a spreadsheet file. IE: Instead of using these configuration files and a .INI file, could I not instead just read values from a .TXT file that contains the desired values?   I’ve never used a .INI file before, or had to worry about “keys” and “sections,” so from my (perhaps naïve) perspective, the .INI method seems less easy to use. Is there any advantage to the .INI format?
Regardless of whether I use the .INI file or a .TXT file, I have this additional problem: One of the things that changes when I install my .EXE file on a new computer is the COM port numbers used by two serial devices.   (On my development computer, the two serial devices use COM5 and COM6, whereas on the two production-flood computers, the COM ports will almost certainly be different).   I suppose I could use the Device Manager on the production-floor computers to change the COM ports to be the same as those on my development computer, but I’d prefer to be able to (again) change the default value of the COM ports in my .EXE.   However, I’m not sure how to do that.   The configuration VIs, have options for reading / writing Booleans, strings, paths, and numeric, but not, (so far as I can tell) for a VISA class.
Any thoughts / suggestions are welcome. Thanks.
Solved!
Go to Solution.

Dan_the_Clam wrote:
Thanks for your reply, Yamaeda,
Great that I can use a string to open a VISA session - I had no idea. I'll try that.
And - ah - you are right about the .INI files. I just did an experiment in which I re-ordered the sections and randomly changed which letters were capitalized in the key values, and the "read configuration settings.VI" still read the file correctly. Thanks for that.
Unfortunately, in my existing code, the controls on the block-diagram aren't all co-located together; they are scattered throughout the block diagram - some of them in case structures and loops.   I suppose that means I'll have to move them all to the left side of the block diagram, route them to these "Write Key.VIs" and then wire them up into the cases and loops with fairly long wires.   It's just a hassle, and is going to make my block diagram more complicated.  Well, I suppose that's how one learns...
Thanks again.
dan
Assuming you have a state machine and an Init state it's a fair use of Local Variables to update controls from the ini-file. The same goes for saving the values.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV

Change default value of Partner Function in VA02

Hi all,
Can anyone please help me solve the following issues with Partner Functions in VA02:
1. How do I change the screen property (make it modifiable) of the Partner in the Partners tab for an auto-generated Free goods line item?
2. How can I change the default value (auto-pulled from KNVP) of the Partner Function Ship-To party for a Free Goods line item? Where do I apply the ABAP code?
We tried to modify thru userexit USEREXIT_FIELD_MODIFICATION and USEREXIT_MOVE_FIELD_TO_VBAP in MV45AFZZ but we can't seem to make it work. Also, the table control of the partners tab exists in SAPLV09C and not SAPMV45A.
Where do we apply the changes?
Points will be rewarded.
Thanks for any help in advance!
Kat

Hi !! KT,
For your auto generated line of free goods item note down what is the item catergory determined. Next use t.code VOPAN, click on radio button 'Sales Document Item' and click on change tab.
Now from the left hand margin options click on 'Partner determination Procedure Assignment', from 'position' go to the item catergory noted down, now note down the partner determination procedure assigned to it.(entry just next to your item category).
Next, from the left hand margin double click on 'Partner determination procedures'. Select the partner determination procedure just noted down, from the left hand margin now click on 'Partner functions in procedure'. Scroll down exactly to the partner function you want to work upon, here unselect the tick under 'Non modifiable'. This way you can now modify the partner.
For changing the default value after doing the above mentioned exercise you can overwrite default value.
Provide your feedback.
Regards,
PATHIK

Change Default 'Open With'

Folks,
I changed something, but don't know what. I want ACR to open for RAW or JPEGs. I believe my prefs are set correctly in both ACR and Bridge. DblClk in Bridge should open ACR; it opens photoshop. I've gone to Finder and a file Get Info > Open all files with Adobe Bridge. This isn't working. How can I change the Right Clik >Photoshop CS4 (Default) to either ACR or Bridge?
Frustrated,
Regards to all,
Charles

How do you use JPEGs? Seems to me the easiest way to make minor JPEG
adjustmentisACR! Dclk > Adjust >Done.
I don't make adjustments to jpegs
Only work in Raw and save as PSD files. Those files can be resized and saved
as jpeg to customers needs. Once you have saved a jpeg you should not make
changes to them because that will cause loss of quality, you don't have that
whit PSD or Tiff files.
When you have good reasons to shoot in jpeg you should do so but the changes
that you can make with them in ACR are very limited compared to use of Raw
files.
My importing from camera continues to be a mixed bag. I shoot raw 90% and
make JPGs via ACR (after importing) as I need them. It''s the copying to
folder, subfolder, other drive, convert to DNG, Add meta data, Keyword...ALL
on Import seems overwhelming; and it is. I just import to a folder and decide
then, almost one by one.
I use Adobe Photodownloader for that, in Bridge choose Get files from camera
and explore the advanced setting, you can do a lot in one click.
Thanks for the input on 'Open With'. I've been having some problems with
Expression Media 2 and I've been trying different methods to get that right.
One of the things I tried was to Repair Permissions in Disk Utility. I think,
but I'm not certain, that that may have corrected the Open With situation.
It is always good to use system maintenance every now and then
Here's a question about Replying to this forum. How do you include the partial
reply? Do you 'Copy & Paste' a selected text? For example, How did you add
"Still can not change the 'Open With' etc., etc." comment in your reply?
On the forum site you can do so when you use the reply button and then use
the tool bar above to quote. But I use my email application (Office for Mac
2008) and simply select the text I want to quote and then choose reply.

Changing default values in Labview 7?

Does Labview 7 have an easy way allow the user at runtime to change the default values of controls? So the user has to enter it once and labview 'remebers' it next time it's run?
So far in 6.1 Labview makes you write some .ini file it writes to, then reads from. or have some nature of 'wrapper' .vi that can stop the main .vi and use the save current values as default option.
Does Labview 7 have an easier solution?

Ariel wrote:
> Does Labview 7 have an easy way allow the user at runtime to change
> the default values of controls? So the user has to enter it once and
> labview 'remebers' it next time it's run?
>
> So far in 6.1 Labview makes you write some .ini file it writes to,
> then reads from. or have some nature of 'wrapper' .vi that can stop
> the main .vi and use the save current values as default option.
>
> Does Labview 7 have an easier solution?
Ariel,
On my web site, I have examples of two of the suggested methods for
dealing with this. The Save Front Panel Defaults program is a
convenient way of using VI server to save the front panel control
defaults after the program is over. All you need to do is insert one VI
at the end of your main pr
ogram.
There is also a set of Configuration File VIs that describe one way
to write .ini files that helps minimize maintenance issues. It still
takes a good bit of programming to implement, but once you have the main
structure, it is pretty easy to add more parameters.
Finally, as Jean-Pierre said, OpenG has some good tools for config
files that are even more automated than mine.
Regards,
Dave
David Thomson 303-499-1973 (voice and fax)
Original Code Consulting [email protected]
www.originalcode.com
National Instruments Alliance Program Member
Certified LabVIEW Developer
Certified Instrument Driver Developer
Research Scientist 303-497-3470 (voice)
NOAA Aeronomy Laboratory 303-497-5373 (fax)
Boulder, Colorado
[email protected]
There are 10 kinds of people: those who understand binary,
and those who don't.

How to change default value in contract by T-code ME32K?

Dear my freinds,
If you have one exist contract and then you use ME32K to change it, you will get default value for material group, plant and storage location in contract.
If you have one materail 1002 at plant AUXX and storage location 0001 in contract already, then you can see these value will be in contract below:
10     M     1     EA     0.00     1     EA     2B0880700     AUXX     0001
20     M                                                                                  2B0880700     AUXX     0001
30     M                                                                                  2B0880700     AUXX     0001
Our user does not want to display default value for filed material group, plant and storage location in contract by T-code ME32K.
Could you give me kind idea how to avoid it? which is really appreciated!
Thanks in advance!

Hi Nick,
Thanks for your idea, I agree with you that it may be fixed by user exit and is not worth to do it, but i only want to know how to do it easily, hopefully I can get answer from you...
Thanks!

How to change default value in "Project file" dialog

I'm new to Labview, and I've encountered an example with a dialog that allows to define a path to a file. If I open the properties on the block diagram of this block the name of the block appears to be "Path Properties: Project file:" The default value points to a different place than where the file installed and the VI won't run untiI I change the path. If I save and open the file, it doesn't remember the change. When the vi is running I can right click the text and there is an option to reinitialize to default. I've rooted around all over the place and can't find where this can be set or changed. How do I change this?

On the front panel, change the control to the desired value.
Now, right click on the control, select Data Operations and Make Current Value Default.
-Matt Bradley
************ kudos always appreciated, but only when deserved **************************

How to change default values in SCC?

Hi,
does anyone knows how to change the default values of the Sybase Control Center e.g.:
Activation Code Expiration (Hours) – indicates how long an activation code is valid. The default is 72 hours.
Within SCC the field is deactivated, it's changeable after creating a connection, but I need to set it within the connection template.
Thanks in advance, Christian

You're right, but we want to change the default setting of the template, to avoid this step.
Thanks, Christian

USOBT_C almost empty after changing default values with SU24

Similar Messages

Maybe you are looking for