%UTIL-3-DLL: Data structure error -- non-tail element contains NULL next po

I am getting the error in my 7200 vxr router where running ios is c7200p-advipservicesk9-mz.124-15.T4.bin
error is
%UTIL-3-DLL: Data structure error -- non-tail element contains NULL next pointer, -
Traceback= 0x140C170 0x3760FDC 0xE0E31C 0xE0EB80 0xE0B910 0x1A4C9FC 0x1A4CC44 0x1A5C378 0x168B05C 0x2D9298 0x1A3E854 0x1A3F110 0x2930240 0x2E5850 0x2905A30 0x2905F08
Please help me out from this problem

Error message decoder results:
1. %UTIL-3-DLL: Data structure error -- %s A software error occurred, resulting in data structure inconsistency.
Recommended Action: Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at https://tools.cisco.com/bugsearch/?referring_site=emd. If you still require assistance, open a case with the Technical Assistance Center via the Internet at https://tools.cisco.com/ServiceRequestTool/scm/mgmt/case, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Related documents- No specific documents apply to this error message.

Similar Messages

%UTIL-3-DLL: Data structure error -- non-tail element contains NULL next p

I am getting the error in my 7200 vxr router where running ios is c7200p-advipservicesk9-mz.124-15.T4.bin
my observation is
when tunnel interface is going down that time i am getting this error
error is
%UTIL-3-DLL: Data structure error -- non-tail element contains NULL next pointer, -
Traceback= 0x140C170 0x3760FDC 0xE0E31C 0xE0EB80 0xE0B910 0x1A4C9FC 0x1A4CC44 0x1A5C378 0x168B05C 0x2D9298 0x1A3E854 0x1A3F110 0x2930240 0x2E5850 0x2905A30 0x2905F08

It does not say much !
The following are utility messages.
Message
%UTIL-3-DLL : Data structure error -- [chars]
Explanation A software error occurred, resulting in a data structure inconsistency.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at
http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Also perform a search of the Bug Toolkit
http://www.cisco.com/pcgi-bin/Support/Bugtool/home.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet
http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the gathered information.

3750x Stack UTIL-3-TREE: Data structure error--attempt to remove an unthreaded node from a tree

A Cisco Stack 3750X switch report the following error message:
%UTIL-3-TREE: Data structure error--attempt to remove an unthreaded node from a tree.
every minute +-20 sec
Cisco IOS Software, C3750E Software (C3750E-IPBASEK9-M), Version 15.0(2)SE4, RELEASE SOFTWARE (fc1)
analog bug: https://tools.cisco.com/bugsearch/bug/CSCsz93221

WS-C3750G-24PS-E C3750-IPBASEK9-M version 12.2(53)SE2
After implementing 802.1x with Avaya IP phones
%UTIL-3-TREE: Data structure error--attempt to remove an unthreaded node from a tree
Port then fails authentication and goes into vl-err-dis

OCCI BUG! Error reading Objects which contain NULLS

The original problem was that I couldn't retrieve a SDO_GEOMERTY object from a table. Using OCCI and the OTT utility I always got assertions and exceptions.
Various people have already reported this problem (e.g. Hu Cao, "HELP!! operating SDO_GEOMETRY with OCCI" ).
After several hours of testing I found the real problem: When ever an object contain NULLS the problem appears.
Eg. the "occiobj"-demo works fine with the original data. However, after setting one value in a publ_address object to NULL
eg. UPDATE publisher_tab SET publisher_id=11, publisher_add=publ_address( NULL , 'NEW YORK') WHERE publisher_id=11;
the demo program crashes!!!
After discovering this, I generated a SDO_GEOMERTY object containing no NULLS and suddenly my program was able to retrieve the object.
Consequently there is only one big problem remaining:
A valid SDO_GEOMERTY object has to have NULLS in it!!!!
Comments please
Johannes
(I'm working with Win2K and the Oracle 9i Client. The bug appears in conjunction with both Oracle 8.1.7 and Oracle 9i)

I downloaded the Oracle 9i Release 2 (9.2.0.1) Client for Win and there I have less problems to get objects which contain NULLs.
Now if a standard-typed member (of an objects) is NULL, OCCI recognizes this correctly and the program never crashed again.
However, there is one BUG remaining. If an object-typed member is NULL the program still crashes.
Eg. if the SDO_POINT member (type MDSYS.SDO_POINT_TYPE) of an MDSYS.SDO_GEOMETRY object is NULL,
the program crashes in the
void sdo_point::readSQL(oracle::occi::AnyData& streamOCCI_)
function (which was generated by the OTT utility). It seems that in function
void sdo_point::readSQL(void ctxOCCI_)
the streamOCCI_.isNull() command doesn't recognize that the sdo_point object is NULL.
(see source code below)
WITH THIS BUG YOU CANNOT GET A MDSYS.SDO_GEOMETRY OBJECT WITH OCCI!!!
Has anybody solved this problem? Is there a bug fix?
Thanks in Advance
Johannes
void sdo_point::readSQL(void ctxOCCI_)
sdo_point *objOCCI_ = new(ctxOCCI_) sdo_point(ctxOCCI_);
oracle::occi::AnyData streamOCCI_(ctxOCCI_);
try
if (streamOCCI_.isNull()) // <-- doesn't recognize that the object in NULL
objOCCI_->setNull();
else
objOCCI_->readSQL(streamOCCI_); // <-- consequently the actual readSQL is called, which crashes...
catch (oracle::occi::SQLException& excep)
delete objOCCI_;
excep.setErrorCtx(ctxOCCI_);
return (void *)NULL;
return (void *)objOCCI_;
void sdo_point::readSQL(oracle::occi::AnyData& streamOCCI_)
X = streamOCCI_.getNumber();
Y = streamOCCI_.getNumber();
Z = streamOCCI_.getNumber();

SAP data structure error

Dear Expert
When I am trying to add any UDF, Delete UDF and Crate FMS then we get error
"[Microsoft][SQL Server Native Client 10.0][SQL Server]Invalid column name 'USER_CODE'. '' (SEVT) (SEVT)"
I trying to see my all FMS but there we dont found any problem.
Please try to provide me the answer.
Thanks in advance

Hi Gordon
I have the same error: [Microsoft][SQL Server Native Client 10.0][SQL Server]Invalid column name 'USER_CODE'. '' (SEVT) (SEVT).
I started getting this error after I uninstalled and then re-installed the server component of SAP B1 Start-up. Please try and assist me.
Regards
Jan

Dynamic subject based on data structure (JD Edwards)

In JD EDwards TR 8.98.3.0 it should be possible to create a dynamic email subject based on a data structure that is connected to a report definition. I have managed to create the data strucure with two elements (DOCO and DESC), this data structure is connected to a report definition in which I have stated that the subject must contain the first element (DOCO): Purchase order &1.
In the report definition I mapped the element DOCO from the data structure to the XML-element that contains the order number.
Unfortunately the e-mail does contain the statis text "purchase order" but it doesn't contain the order number (DOCO) from the XML-file.
Can anyone give me a hint for what I have done wrong?

In JD EDwards TR 8.98.3.0 it should be possible to create a dynamic email subject based on a data structure that is connected to a report definition. I have managed to create the data strucure with two elements (DOCO and DESC), this data structure is connected to a report definition in which I have stated that the subject must contain the first element (DOCO): Purchase order &1.
In the report definition I mapped the element DOCO from the data structure to the XML-element that contains the order number.
Unfortunately the e-mail does contain the statis text "purchase order" but it doesn't contain the order number (DOCO) from the XML-file.
Can anyone give me a hint for what I have done wrong?

Unsure what data structure will work best??

okay heres the scenario
i have 4 strings per element and i need to store these within a data structure, the number of elements is not to be fixed
is it possible to store an array within an arraylist or vector?
when i tried to implement the vector it seemed to work fine until i tried to display the element, heres my code
Vector vectorDetails = new Vector();
String[4] arrayDetails = new String(4);
details[0] = nameText.getText();
details[1] = nameText.getText();
details[2] = nameText.getText();
details[3] = nameText.getText();
String[] s1 = (String)details.lastElement();
String[] s2 = (String)details.firstElement();
whenever i print s1 or s2 i get the same information, regardless of the amount of elements i have
sorry i couldn't post more of the code, but its on the large size, but if anyone can help i would be much appreciated

okay, now i am really confused, how did i get from a vector to a hashtable??
to be honest i dont think that structure will work with my GUI
the way it stands i have five buttons across the top, standard buttons, i.e. new, add, search, edit, delete
at the bottom i have four buttons, firstElement, previousElement, nextElement, and lastElement
in the center of the screen i have my textfields were i enter the details and also view each individual persons details, as such i will need access to each individual string
at present i have two classes, EmailContactDatabase.java & Person.java so i will need to pass the persons details back and forth
any further help would be much appreciated
note this is a university assessment, so i am not looking for specific code, just some pointers to get me in the right direction
note note the structure as i pointed out in an earlier post does NOT have to be dynamic, i can set the maximum number of elements.

Error connecting Domains: Invalid parameter,tdom_link contains NULL

Hi,
I'm trying to connect two Domains DOM1 and DOM2. DOM1 is running under Tuxedo8
in a RedHat Linux 7.2. The remote Domain is running in a former Tuxedo Version,
probably 6.5.
When booting I get the next error:
LIBGWT_CAT:1242: ERROR: Invalid parameter, tdom_link contains NULL pointer
The description in the documentation is
Description
GWTDOMAIN detects an internal error, or possible data corruption when it does
a network open call.
Action
Contact your BEA Customer Support.
Can anyone give any clue?
Thanks in advance, bye!
Yol.

Do you have an idea in which section I can look for the mistake? I have other domains
running correctly configured in this config file, and everything seems to be ok
for this domain too.
Thanks in advance
Yol.
"mike" <[email protected]> wrote:
>
this error is in dmconfig.txt
"Yolanda Arroyo" <[email protected]> wrote:
Hi,
I'm trying to connect two Domains DOM1 and DOM2. DOM1 is running under
Tuxedo8
in a RedHat Linux 7.2. The remote Domain is running in a former Tuxedo
Version,
probably 6.5.
When booting I get the next error:
LIBGWT_CAT:1242: ERROR: Invalid parameter, tdom_link contains NULL pointer
The description in the documentation is
Description
GWTDOMAIN detects an internal error, or possible data corruption when
it does
a network open call.
Action
Contact your BEA Customer Support.
Can anyone give any clue?
Thanks in advance, bye!
Yol.

Plz help upgrade issue moving data from char type structure to non char typ

Hi Experts
plz help its very urgent
Data :workout(5000) .
FIELD-SYMBOLS : <FS_WORKOUT> TYPE ANY.
workout = '         u' .
ASSIGN WORKOUT TO <FS_WORKOUT> CASTING TYPE C .
                  BAPISDITM = <FS_WORKOUT>.
i am getting dump after BAPISDITM = <FS_WORKOUT>.
i think i am getting the dump bcoz i am moving character type structure to non character type structure but i think with field symbols we can remove this issue thats y i used it but its not working plz help me
its very urgent
*dump is :*
Short text
    Data objects in Unicode programs cannot be converted.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "ZSDR0009" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
How to correct the error
    Use only convertible operands "dst" and "src" for the statement
       "MOVE src TO dst"
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "UC_OBJECTS_NOT_CONVERTIBLE" " "
    "ZSDR0009" or "ZSDR0009_I02"
    "USER_COMMAND"
thanx in advance

i got d solution in this thread
Hi all,
data: gv_line(6000) type c.
Bvbapkom = gv_line.
But i am getting the Error like : gv_line and Bvbapkom are not mutually convertable.
Note: Bvbapkom is a Structure
How do i solve this ?
Mahesh
KR
Posts: 210
Registered: 11/24/06
Forum Points: 0
Re: gv_line and Bvbapkom are not mutually convertable.
Posted: Nov 30, 2007 8:40 AM    in response to: KR         Reply
Hi ,
i got the solution
ANSWER:
Field-symbols: <X_Bvbapkom> type x,
<X_gv_line> type x.
Assign: Bvbapkom to <X_Bvbapkom> casting,
gv_line to <X_gv_line> casting.
<X_Bvbapkom> = <X_gv_line>.
Nasaka Ramakris...
Posts: 4
Registered: 1/19/08
Forum Points: 20
Re: gv_line and Bvbapkom are not mutually convertable.
Posted: Jan 19, 2008 7:42 AM    in response to: KR         Reply
Hi Check this answer.
ANSWER:
Field-symbols: <X_Bvbapkom> type x,
<X_gv_line> type x.
Assign: Bvbapkom to <X_Bvbapkom> casting,
gv_line to <X_gv_line> casting.
<X_Bvbapkom> = <X_gv_line>.

InfoPath - "Schema validation found non-data type errors." at XmlWriter.Close()

Greetings,
I'm creating a form that allows for emailing attachments however I am having an issue. When I try to attach a file, I get an "Schema validation found non-data type errors." error message. It seems like it's something with the XML structure and
I cannot find anything wrong.
Here is the code:
string myNamespace = NamespaceManager.LookupNamespace("my");
using (XmlWriter writer = MainDataSource.CreateNavigator().SelectSingleNode("/my:myFields/my:Email/my:AttachmentGroup", NamespaceManager).AppendChild())
//Write to XML
InfoPathAttachmentEncoder myEncoder = new InfoPathAttachmentEncoder(currentFile);
writer.WriteStartElement("Attachments", myNamespace);
writer.WriteElementString("attachment", myNamespace, myEncoder.ToBase64String());
writer.WriteElementString("attachmentCheckbox", myNamespace, "false");
writer.WriteEndElement();
writer.Close();
Here is the structure of the XML (root node is myFields):
<my:Email>
<my:AttachmentGroup>
<my:Attachments>
<my:attachment xsi:nil="true"></my:attachment>
<my:attachmentCheckBox>false</my:attachmentCheckBox>
</my:Attachments>
</my:AttachmentGroup>
<my:emailAddress>[email protected]</my:emailAddress>
<my:subject>Paychex ESR Services Paperwork</my:subject>
<my:body/>
<my:selectAll>false</my:selectAll>
</my:Email>
Attachments is the repeating group in this case.
Can anyone spot where the error is coming from?
Thanks!

HI,
I fixed it:
Below code is used to fix:
[CODE]
XPathNavigator xfield = null;
DateTime dtmyRecievedDate;
dtmyRecievedDate = Convert.ToDateTime(objInfopathFormcData.myRecievedDate);
if (objFormcData.FcCompletionDate != null)
xfield = myRoot.SelectSingleNode("/my:myFields/my:field97", NamespaceManager);
DeleteNil(xfield);
xfield.SetValue(dtmyRecievedDate.GetDateTimeFormats().GetValue(5).ToString());
// method to delete xsi:nil
private void DeleteNil(XPathNavigator nav1)
if (nav1.MoveToAttribute("nil", "http://www.w3.org/2001/XMLSchema-instance"))
nav1.DeleteSelf();
[/CODE]
Thank you

Error while running bulk load utility for account data with CSV file

Hi All,
I'm trying to run the bulk load utility for account data using CSV but i'm getting following error...
ERROR ==> The number of CSV files provided as input does not match with the number of account tables.
Thanks in advance........

Please check your child table.
http://docs.oracle.com/cd/E28389_01/doc.1111/e14309/bulkload.htm#CHDCGGDA
-kuldeep

"Schema validation found non-data type errors" error when passing a string value to date field in infopath

Hi,
I have an infopath web brower enabled form. In the form i have a date field.
I am passing the data from the database to that field using the C# code.
But, as the field from database is coming as string, i am getting an error, and i am not able to assign the value.
I get the date value from database as "3/25/2011 12:00:00 AM"
I used the below code:
[CODE]
if (objInfopathFormcData.myRecievedDate != null)
myRoot.SelectSingleNode("/my:myFields/my:field97", NamespaceManager).SetValue(objInfopathFormcData.myRecievedDate);
[/CODE]
I am getting the error as "Schema validation found non-data type errors".
How to set the value for a date field in Infopath.
Thank you

HI,
I fixed it:
Below code is used to fix:
[CODE]
XPathNavigator xfield = null;
DateTime dtmyRecievedDate;
dtmyRecievedDate = Convert.ToDateTime(objInfopathFormcData.myRecievedDate);
if (objFormcData.FcCompletionDate != null)
xfield = myRoot.SelectSingleNode("/my:myFields/my:field97", NamespaceManager);
DeleteNil(xfield);
xfield.SetValue(dtmyRecievedDate.GetDateTimeFormats().GetValue(5).ToString());
// method to delete xsi:nil
private void DeleteNil(XPathNavigator nav1)
if (nav1.MoveToAttribute("nil", "http://www.w3.org/2001/XMLSchema-instance"))
nav1.DeleteSelf();
[/CODE]
Thank you

Error saving data structure CE11000 (please read log) message number KX 655

while activating the data structure in the operating concern of CO PA sap gives the following errors.
1.Error saving data structure CE11000 (please read log)
Message no. KX655
2.Error saving table CE01000
Message no. KX593
3.in Log Reference field CE31000-REC_WAERS for CE31000-VVQ10001 has incorrect type.
Pls suggest

Hey,
Below tables are related to application logs
BAL_AMODAL :                   Application Log: INDX table for amodal communication
BALC        :                   Application Log: Log or message context
BALDAT      :                   Application Log: Log data
BALHANDLE   :                   Application Log: Lock object dummy table
BALHDR      :                   Application log: log header
BALHDRP     :                   Application log: log parameter
BAL_INDX    :                   Application Log: INDX tables
BALM        :                   Application log: log message
BALMP       :                   Application log: message parameter
BALOBJ      :                   Application log: objects
BALOBJT     :                   Application log: object texts
BALSUB      :                   Application log: sub-objects
BALSUBT     :                   Application log: Sub-object texts
-Kiran
*Please mark useful answers

XSLT Transformation error: Non-canonical structure of element name

Good day experts,
I have recently started using xslt, and came upon the following demo in the sdn.
http://wiki.sdn.sap.com/wiki/display/ABAP/XMLXSLTwith+ABAP
I have retrieved the example xml files from airplus.com, as per the instructions, and implemented the code.
When I test the xslt transformation in se80, it transforms correctly.
However, when I run the program, I get the following error.
CX_XSLT_FORMAT_ERROR
Transformation error: Non-canonical structure of element name XML_OUTPUT
Is there an error in the example that I am not aware of?
Thanks in advance,
Johan Kriek

Found the solution.
You rename the tag <XML_OUTPUT> to anything else like <TEST>. And Hurray!!! it works.
It looks like SAP is using this name internally somewhere so we are getting error when we are using same name.
Anyways the problem is solved.
Regards,
Jai

How to access data structures in C dll from java thru JNI?

We have been given API's( collection of C Functions) from some vendor.
SDK from vendor consist of:
Libpga.DLL, Libpga.h,Libpga.lib, Along with that sample program Receiver.h (i don't know its written in C or C++), I guess .C stnads for C files?
Considering that I don't know C or C++ (Except that I can understand what that program is doing) & i have experience in VB6 and Java, In order to build interface based on this API, I have two option left, Use these dll either from VB or Java.
As far as I know, calling this DLL in VB requires all the data structures & methods to be declared in VB, I guess which is not the case with Java (? I'm not sure)
I experiemnted calling these function from Java through JNI, and I successfully did by writting wrapper dll. My question is whether I have to declare all the constants & data structures defined in libpga.h file in java, in order to use them in my java program??
Any suggesstion would be greatly appreciated,
Vini

1. There are generators around that claim to generate suitable wrappers, given some dll input. I suggest you search google. Try JACE, jni, wrapper, generator, .... Also, serach back through this forum, where there have been suggestions made.
2. In general, you will need to supply wrappers, and if you want to use data from the "C side" in java, then you will need java objects that hold the data.

%UTIL-3-DLL: Data structure error -- non-tail element contains NULL next po

Similar Messages

Maybe you are looking for