Utility to block writing ._[files] to SMB shares over Ethernet?

I'm just tired of informing Windows users at the office that the files I've put on their machines are the ones without the "._" at the beginning of their filenames, and that they can safely trash anything beginning with "._"
I'm also sure I saw somewhere yesterday a utility (or was it a PrefPane?) that eliminates all resource files/"._" redundant files from being copied to smb shares. Can't remember what it was or where I bumped across it.
Any pointers people?
Many thanks.

I'm actually surprised that it worked - 'DSDontWriteNetworkStores' set to "true" is supposed to block the creation (though not the copying) of ".DS_Store" files that store "Finder" info such as window or icon positions, "Comments", etc. The "._files" are "AppleDouble" files which contain information from resource forks, file attributes and some other metadata - a different thing entirely that shouldn't be affected by the ' DSDontWriteNetworkStores' setting. I think there are a few third party utilities that can clean up "._AppleDouble" files (including the ones mentioned already), but I'm not sure if there is any way to prevent them from being created...
By the way, ...'write true' writes '<string>true</string>' whereas ...'write -bool true' writes '<true/>' to the ".plist" file. Some apps have been written to recognize a given key with either form but others seem to require one or the other. This is in contradiction to the 'man' page for 'defaults', which states:<pre> For the basic plist types (strings, data, ints, floats, booleans, and
dates) it is not necessary to precede the value with a type qualifier.</pre>

Similar Messages

ITunes freezes when adding music file from smb share

As title states, if I try to add more than 15/20 files to iTunes, it freezes and there's no turning back.
All my music is stored on my home-server (running Gentoo/Linux) and I have always used it with success until iTunes 10 came out.
The only thing I can do is to unmount the remote directory, open iTunes and remove the music.
I've already tried to upgrade to v10.0.1 but no luck so far.
Any clue?
Thank you

This has gotten to be a real problem for me as well. It freezes for about 40 seconds for each song I add. It even comes up as "not responding" at times in the force quit dialogue box. I rolled back to iTunes 9.2.1 as described here:
http://discussions.apple.com/thread.jspa?threadID=2603684&tstart=0
Others have reported this fixing the problem, but it has NOT fixed it for me. I have my media on an SMB share and my library files were on the local hard drive. I tried moving the library files over to the SMB share, but it didn't improve anything.
I've been using "Activity Monitor" to look at what's going on and there's minimal CPU usage. But I am noticing something odd: the "Reads in" and "Writes out" figures are pretty much the same, which is what I would expect as I'm copying song files from my internal HD to the SMB share. But the "Data read" and "Data written" figures are very different. It's reading over twice as much data as it's writing. Either I'm misunderstanding what I'm looking at or something isn't right here. Anyone with more technical chops care to jump in?
I'd post a picture, but there doesn't seem to be a way to do this.
I'm also wondering if there are corrupted plist files or other invisible files that can be deleted and rebuilt? I used "Filebuddy" to unhide the files and found a file in the iTunes folder called "sentinel". Anyone know what that is?

Copy file from SMB share to Desktop permissions

I have connected to a SMB share point (Windows Server)and copy a file to my desktop (Mac OS X 10.6.4).
The file on my desktop shows I have the read and write access, however, everyone has no access.
I could not get the system administrator to change on the server side. Is it possible to make any changes from my machine to make at lease every has read only access?
Thanks in advance.

I downloaded D2KWUtil from the link suggested by you. It has very nice example demo form. But the documentation provided says following
Using D2KWUTIL in Web Deployed Applications
The use of this library is not supported with Web deployed applications.
In a web deployment scenario not all functions within D2KWUTIL will work. Any function that interacts with the User Interface (such as those in the WIN_API_DIALOG package) will fail.
Any interaction with the O/S by other functions will all be executed on the NT server and will act within, or return information pertinant to, the environment on that machine. For instance GET_COMPUTER_NAME will return the Server’s name, not the name of the computer that the Client browser is running on. Likewise COPY_FILE will copy files in the Forms Server not on the Client.
Functions such as those in WIN_API_BITOP will continue to work without change.
so this will not work in web deployed application.
Any other suggestion?
Thanks

Photoshop CS5 not actually saving files to SMB shares

Since upgrading to OS X 10.6.6 (and still in 10.6.7) Photoshop CS5 will not reliably save documents to SMB shares on my file server. When I "Save As" a new document, Photoshop goes through all the motions of saving the file. It seems to complete successfully. No error messages. The asterix in the documents title bar disappears as if the file saved. If you command-click on the document's title bar icon it will display the file path properly, as if the file was properly saved and exists. If, however, you go to the folder on the server where the document was supposedly saved using the Finder (or on a Windows machine in the Windows Explorer) the file does not exist. It was never actually saved.
This seems to happen mostly with larger files (over, say, 100MB in size) as oppsed to smaller files. If I change my connection to the server to AFP as opposed to SMB(CIFS) the file saves correctly without any problems.
Has anybody else ever encountered this problem? I have only noticed this issue since upgrading past OS X 10.6.5.
Thanks!

This is the boilerplate text often used in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files. Working across a network is not supported.
See:
http://kb2.adobe.com/cps/406/kb406793.html
Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work. It should.
Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
When problems arise, a lot of valuable work can be lost.

Cannot lock files on SMB share

I have a file copied to an SMB share. I would like to lock the file, preferably using applescript. Right now, though, I can't even lock the file by doing a command-I and checking the "locked" box - it checks, then clears itself.

I'm sortof figuring that but I can always hope - I just wish I could find some solid documentation that says yes/no... and I haven't been able to.....

Slow transfer from/to SMB share over Airport

Recently I updated my Macbook's Airport with 2008-004 (OSX 10.5.5) update and now I am experiencing very slow transfers to and from SMB share.
I get normal speeds (~3MBps) if I copy file from my macbook to iMac, but when I copy the same file to (or from) Windows share the speed drops to ~130kBps after 1 or 2 gigabytes of transfer and never recovers to full speed afterwards. If I connect to this Windows machine using FTP the transfer speed is normal - 3MBps.
I also tried streaming to my appleTV which is also connected wirelessly and all movies play just fine.
If I connect my macbook to wired 100Mbps ethernet the transfer speed to windows share is full 8MBps.
Anyone has any ideas what's happening?

This has been an ongoing problem of the Airport Extreme for, well, forever. In the beginning, I even thought my AE was broken, so I returned it to the shop to get a new one. I got a new one alright, but it has the same problem.
I've Googled this problem many times and once in a while I try again to hopefully find a solution, but no luck so far. Whenever there is a software (or actually firmware) update for the AE I get very excited, only to get disappointed again.
The performance of the AE I have now is really unpredictable, sometimes it would do up to 8 MB/sec. Lately though, it only does 1 MB/sec and the network activity looks really weird (a lot of spikes in traffic and then slowing down again).
I'm 100% Mac here and nothing in this house runs windows, so I'm really lost on this subject and I feel like I should give up and just buy myself a good Linksys that actually does the job.
But, just to keep trying: does anybody found a solution to this common problem?

Error -36 while copying files to SMB shares but not AFP. (OSX Server APP)

Hello,
So far my transition to OSX server has been a sloppy one. I have had so many problems. I have problems with permissions about everyday. Anyhoos, here is my latest problem. Everytime (from any client computer) a computer tries to copy a file or folder to a share using SMB protocol to the osx server i get this message:
The Finder can’t complete the operation because some data in “File or folder name" can’t be read or written.
(Error code -36)
This does NOT happen when copying the same files using AFP protocol. I using a windows box at work, (dialing in throught the VPN) it doesn't seem to have any problems dropping files either. Anyone know whats up? I have read on the site that others are experiencing problems with SMB within OSX servers. Some report that it stright doesn't work!!!!
Anyhoos, through all my problems, you guys have been VERY helpful to help me work through it. I really appreciate it!!

Just found a slight work around:
http://www.macwindows.com/TIP--Workaround-to-Mavericks-file-sharing-is-to-force- SMB.html
Several readers offered a suggestion for yesterday's report of problems with OS X 10.9 Mavericks accessing some Windows file servers and network attached storage device. Mavericks now defaults to SMB2 file sharing protocol, but a bug seems prevent OS X from using SMB1 or AFP when the server doesn't support the newer SMB2.
A workaround is to force OS X to use the old SMB1 (also known as SMB/CIFS). To do that, instead of mounting the server using the Finder, use the Connect to Server command in the Finder's Go menu. Then type in the following:
cifs://server_address (using the IP address or network name of the server)
Using smb://server_address won't work, as this will use SMB2 to access the device.
Thanks to Mario Cajina and Kevin Lepard for the suggestion.

Cannot add lyrics to AAC files on SMB share

A really odd behavior. I cannot add lyrics to AAC files living on an SMB-mounted share that holds all of my songs. It works for MP3s, but whenever I add lyrics and press OK, or use an automatic lyric finding script, the pasted lyrics disappear. I know that the share is not write protected, and neither are the songs in question. I have no trouble adding new songs to that same volume.
Any help or idea what to check for would be greatly appreciated.

I'm sortof figuring that but I can always hope - I just wish I could find some solid documentation that says yes/no... and I haven't been able to.....

Files on SMB share vanishing from Finder

Hi,
I got a brand new 13" Macbook Pro Retina running OS X Mavericks and I noticed some very odd behaviour when looking at folders on my fileserver containing solely JPGs.
It is kind of hard to explain, but I have made a video of it so you can see the effect for yourselves:
https://www.youtube.com/watch?v=smjM7OzTOi0
Basically what happens is when I browse to the folder, all the files just start disappearing from the finder. Requesting info on the folder shows they're still there but I cannot see them anymore. If I mess around with the various view options for the folder for long enough they seem to reappear sometimes.
This is pretty bad. Anyone have an idea on how to fix this or what might cause it? The fileserver is a simple QNAP box that did not have this issue with the previous Macbook I had running 10.8 nor with any other device I own so I doubt the problem is on that end.
Any help would be greately appreciated.

Hi,
same problem here. I upgraded my MacBook Pro Retina to 10.9 yesterday. Files are still there as you can see in a terminal window...
Stefan

Trying to access SMB share, can read but not write, I use the domain account to autenticate and domain account has access to the share. its a samba domain and im a Windows Admin by trade.

I have two I Mac's Intel i7 models.
I have some problems getting them to write files to SMB shares.
The domain user account I use when requested to enter when i first try to connect to the share seems to go though without a problem and it presents me with a list of mounts (shares) I select one and the folder opens, I can read files and copy them but I cant write to any of the folders.
I have also mounted the network locatiosn to a folder from the terminal while also specifying a user name and password to use but this also doesnt allow the specified user account to write data to the share.
I have confirmed the user account can write to the share by having the user do so from a windows box.
any help from any of you mac guys would be great!!!!
Im a windows fan boy / Windows Server based Network Administrator and am slowly becomming a fan of your macs (mainly due to the Unix terminal access letting me realise there is more control to be had than most haters would lead you to believe).
Peace Out

I should add that I originally formatted the problematic drive for FAT32 from the Mac, but then the WinXP computer couldn't see the drive when I plugged it in directly via USB. That's why I went with Seagate's utility to format it.

Blocking access to file sharing (AFP/SMB) from outside of network

Hello all,
Is there a way to block access to file shares from outside of our LAN? I have a machine that has some sharing turned on (it is also my email server) and I can reach it across the internet and mount shares as if I was in the office.
How can I block this access? Both SMB and AFP?
Thank you,
-John

Justin, thank you for your reply. The machine is on a public ip address and is not behind a NAT router. I've turned on the software firewall and that is working now. However, I imagine it would be better to use a hardware firewall. Any suggestions on a good one? Thank you.

Not writing to file

Hi,
I have made a program that reads a string, converts it to bytes, then writes to a file.
Well i got the first two working, but its not writing to file. I know it should work cos i have written to file on my previous tests, but when i used a FOR loop it stoped working. Do ya know why. Below is the code...
for (int a = 0;a = bytes.length - 1;a++){
of.write(bytes[a]);
System.out.print(" " + bytes[a] + " : " + bytes.length);
My friend told me to use bytes.length - 1 as it is meant to stop the OUTOFBOUNDS error.
OK,
my regards
Below is the whole program, its a bit messy cos i got lots of old code that i have blocked.
import java.io.*;
import java.awt.event.*;
import javax.swing.*;
import java.lang.String;
public class sender implements Runnable {
int i= 0;
String mes;
int count =0;
int b = 0;
boolean yes = false;
public static void main (String[] arguments) {
Thread th = new Thread (new sender());
th.start ();
//sender();
//while (true){}
public void run() {
try {
Thread.sleep(100);
} catch (InterruptedException e) {}
String mesdialog = JOptionPane.showInputDialog(null,
"Enter your message");
mes = mesdialog.toString();
try {
//FileOutputStream of = new
//FileOutputStream ("send.txt");
FileWriter of = new
FileWriter("send.txt");
//BufferedReader in = new
// BufferedReader(fr);
//while (true){}
int i = 66;
boolean eof = false;
int inChar = 0;
//String inChar;
byte[] bytes = mes.getBytes();
/* < disable / enable
do {
int n=Integer.MIN_VALUE;
try{
n = Integer.parseInt(mes);
} catch (NumberFormatException nfe){
//inChar = n;
if (inChar != -1) {
byte outChar = (byte)inChar* ;
//char outChar = (char)inChar ;
of.write(outChar);
System.out.println("" + outChar);
//of.write(mes,0,20);
} else
eof = true;
} while (!eof);//*/
for (int a = 0;a = bytes.length - 1;a++){
of.write(bytes[a]);
System.out.print(" " + bytes[a] + " : " + bytes.length);
while (!yes) {
if (bytes[b] == 32 )
yes = true;
else {
of.write(bytes);
System.out.print(" " + bytes[b]);
b++;
//System.exit(0);
//outfile.write(input);
} catch (IOException e) {
System.out.print("AAA ERROR");}

your friend was obviously wrong.
for (int a = 0;a = bytes.length - 1;a++){ // that does nothing
of.write(bytes[a]);
System.out.print(" " + bytes[a] + " : " + bytes.length);
}the above "for" loop says :
1:initialize a with 0;
2:do loop while a=bytes.length(<-that's completely wrong. it should be
a boolean expression);
3:for each loop increment "a" by one.
try this:for (int a = 0;a < bytes.length;a++){
of.write(bytes[a]);
System.out.print(" " + bytes[a] + " : " + bytes.length);

Writing to file with ObjectOutputStream

ApartmentWriterProgram asks information about apartments
and saves it to a file.
For some reason it doesnt save information, it writes:
Writing to file "+file+ " failed.
So there happens IOException in the method write(Apartment apartment).
Or in the run().
I dont know what's wrong. Do you?
public class ApartmentFileHandler extends Object implements Serializable {
    private OutputStream outStream;
    private ObjectOutputStream obStream;
    private String filePath;
        public ApartmentFileHandler(String filePath) {
           this.filePath = filePath;
/** Writes the given apartment data in the file. If the file already
exists, the old contents are overwritten.
Parameters:
apartment - the apartment to be written in the file
Throws:
IOException - if other problems arose when handling the file (e.g. the
file could not be written)
        public void write(Apartment apartment)
           throws IOException {
           outStream = new FileOutputStream(filePath);
           obStream = new ObjectOutputStream(outStream);
           obStream.writeObject(apartment);
import java.io.*;
import java.util.*;
public class ApartmentWriterProgram
extends Object
    private KeyboardReader keyboardReader;
    private List roomsInList;
    private Room[] rooms;
    private int numberOfRooms;
    private String file;
          public ApartmentWriterProgram()
            this.keyboardReader = new KeyboardReader();
            this.roomsInList = new ArrayList();
            this.rooms = new Room [numberOfRooms];
/** Runs the writer program. The program asks the user for some
apartment data and a file name, and saves the data in the file. */
          public void run() {
            try {
              numberOfRooms = keyboardReader.getInt("Give number of rooms: ");
              for (int i =1; i<numberOfRooms+1; i++) {
                 String type =keyboardReader.getString("Give " +i+ ". " + "type of the room: ");
                 double area =keyboardReader.getDouble("Give " +i+ ". " + "area of room: ");
                 Room room= new Room(type, area);
                 this.roomsInList.add(huone);
              roomsInList.toArray(rooms);
              Apartment apartment = new Apartment(rooms);
              System.out.println();
              file = keyboardReader.getString("Give name of the file: ");
              ApartmentFileHandler handler = new ApartmentFileHandler(file);
              handler.write(apartment);
           } catch (IOException ioe) {
             System.out.println("Writing to file "+file+ " failed.");
         public static void main(String[] args) {
              ApartmentWriterProgram program = new ApartmentWriterProgram();
              program.run();
}

There is nothing to gain in not putting the throws IOException in the write method, since the exception object will have the information about the actual problem.
Is this a typo for the this post?                 this.roomsInList.add(huone); should be room nes pas.
What exception is actually thrown? To find out useSystem.out.println("Exception: " + ioe);Then wonder why you have the AppartmentFileHandler implement Serializable when you are not writing that object to the file.

Multithreading - writing to file

How can I get to write the Thread name, date and time to a file with the same thread name?
What would I need to do to write the same information 1000 times to the file? Thank you.
import java.lang.Thread;
import java.lang.InterruptedException;
public class RiveraThreadsMain {
    public static void main(String[] args) {
      System.out.println("Creating threads");
      Thread riverathread0 = new Thread (new RiveraThreads ("riverathread0"));
      Thread riverathread1 = new Thread (new RiveraThreads ("riverathread1"));
      Thread riverathread2 = new Thread (new RiveraThreads ("riverathread2"));
      System.out.println("Threads created, starting tasks.");
      riverathread0.start(); // invokes thread1's run method
      riverathread1.start(); // invokes thread2's run method
      riverathread2.start(); // invokes thread3's run method
      try
       Thread.currentThread() .sleep (10000);
      catch (InterruptedException e)
        e.getStackTrace();
         System.out.printf (
         "terminated prematurely due to interruption");
      System.out.println("Tasks started, main thread ends. \n");
    } // end main
import java.io.File;
import java.io.IOException;
import java.util.NoSuchElementException;
import java.io.FileNotFoundException;
import java.util.Formatter;
import java.util.NoSuchElementException;
import java.util.Calendar;
import java.util.Scanner;
public class RiveraThreads implements Runnable {
Thread launcher;
private String taskName;
private Scanner input;
private Formatter output;
// empty constructor
public RiveraThreads (){
public RiveraThreads (String threadName)
    launcher = new Thread ( this, threadName );
    System.out.println ( launcher.getName());
    launcher.start();
   // taskName = name; // set task name
public void run ()
    //System.out.println(Thread.currentThread().getName());
    try
      Calendar dateTime = Calendar.getInstance();
    // output = new Formatter (new File (launcher.getName() ));
      input = new Scanner( new File( launcher.getName() ) );
      output = new Formatter (new File ( launcher.getName() ));
      System.out.printf( launcher.getName() + "%tc\n", dateTime );
    }// end try
    catch ( NoSuchElementException exception)
        exception.getStackTrace();
        System.out.printf ( "%s %s \n ", taskName,
         "terminated prematurely due to interruption");
    }// end catch
    catch ( FileNotFoundException filenotfound )
        System.out.printf (" %s %s \n ", filenotfound,
          "File not found");
    catch (IOException ioexception)
      System.err.printf(
        "Unable to read file");
    // close file and terminate application
   public void closeFile()
         input.close();
      }// close file
          output.close();
   } // end method closeFile
}

FRiveraJr wrote:
Hi jverd
What are you having trouble with?
I know how to use the BufferedReader and BufferedWriter for opening, reading and writing to file. But the trouble consists in a lot of code to write and how will I call the appropriate file name since it is supposed to be
the same name as the thread into all of this? I still don't know what problem you're having.
You know how to provide a file name, right?
Do you know how to get a thread name?
If both are "yes", then I don't see what's left that you'd be having problems with. You need to be specific. Nobody here can read your mind, since it's the holidays.
Writing to a file?
Yes, I'm getting the correct results to the console with the thread name and the calendar option with the date and time and this is the data that needs to be written to a file. Isn't there a more simple way?A simpler way than your current code? How can anybody answer that without seeing your code?
What would I need to do to write the same information 1000 times to the file?
Because that is part of the requirements. Is not that I am insane :0).... This is just part of developing my skills since I'm new to all this. So, do you still have a question about this part? You do know how to loop, right? If not, you shouldn't be getting anywhere near I/O or multithreading.

Recovery is repairing media corrupt block x of file x in standby alert log

Hi,
oracle version:8.1.7.0.0
os version :solaris 5.9
we have oracle 8i primary and standby database. i am getting erorr in alert log file:
Thu Aug 28 22:48:12 2008
Media Recovery Log /oratranslog/arch_1_1827391.arc
Thu Aug 28 22:50:42 2008
Media Recovery Log /oratranslog/arch_1_1827392.arc
bash-2.05$ tail -f alert_pindb.log
Recovery is repairing media corrupt block 991886 of file 179
Recovery is repairing media corrupt block 70257 of file 184
Recovery is repairing media corrupt block 70258 of file 184
Recovery is repairing media corrupt block 70259 of file 184
Recovery is repairing media corrupt block 70260 of file 184
Recovery is repairing media corrupt block 70261 of file 184
Thu Aug 28 22:48:12 2008
Media Recovery Log /oratranslog/arch_1_1827391.arc
Thu Aug 28 22:50:42 2008
Media Recovery Log /oratranslog/arch_1_1827392.arc
Recovery is repairing media corrupt block 500027 of file 181
Recovery is repairing media corrupt block 500028 of file 181
Recovery is repairing media corrupt block 500029 of file 181
Recovery is repairing media corrupt block 500030 of file 181
Recovery is repairing media corrupt block 500031 of file 181
Recovery is repairing media corrupt block 991837 of file 179
Recovery is repairing media corrupt block 991838 of file 179
how i can resolve this.
[pre]
Thanks
Prakash
Edited by: user612485 on Aug 28, 2008 10:53 AM

Dear satish kandi,
recently we have created index for one table with nologgign option, i think for that reason i am getting that error.
if i run dbv utility on the files which are shown in alert log file i am getting the following results.
bash-2.05$ dbv file=/oracle15/oradata/pindb/pinx055.dbf blocksize=4096
DBVERIFY: Release 8.1.7.0.0 - Production on Fri Aug 29 12:18:27 2008
(c) Copyright 2000 Oracle Corporation. All rights reserved.
DBVERIFY - Verification starting : FILE = /oracle15/oradata/pindb/pinx053.dbf
Block Checking: DBA = 751593895, Block Type =
Found block already marked corrupted
Block Checking: DBA = 751593896, Block Type =
.DBVERIFY - Verification complete
Total Pages Examined : 1048576
Total Pages Processed (Data) : 0
Total Pages Failing (Data) : 0
Total Pages Processed (Index): 1036952
Total Pages Failing (Index): 0
Total Pages Processed (Other): 7342
Total Pages Empty : 4282
Total Pages Marked Corrupt : 0
Total Pages Influx : 0
bash-2.05$ dbv file=/oracle15/oradata/pindb/pinx053.dbf blocksize=4096
DBVERIFY: Release 8.1.7.0.0 - Production on Fri Aug 29 12:23:12 2008
(c) Copyright 2000 Oracle Corporation. All rights reserved.
DBVERIFY - Verification starting : FILE = /oracle15/oradata/pindb/pinx054.dbf
Block Checking: DBA = 759492966, Block Type =
Found block already marked corrupted
Block Checking: DBA = 759492967, Block Type =
Found block already marked corrupted
Block Checking: DBA = 759492968, Block Type =
.DBVERIFY - Verification complete
Total Pages Examined : 1048576
Total Pages Processed (Data) : 0
Total Pages Failing (Data) : 0
Total Pages Processed (Index): 585068
Total Pages Failing (Index): 0
Total Pages Processed (Other): 8709
Total Pages Empty : 454799
Total Pages Marked Corrupt : 0
Total Pages Influx : 0
bash-2.05$ dbv file=/oracle15/oradata/pindb/pinx054.dbf blocksize=4096
DBVERIFY: Release 8.1.7.0.0 - Production on Fri Aug 29 12:32:28 2008
(c) Copyright 2000 Oracle Corporation. All rights reserved.
DBVERIFY - Verification starting : FILE = /oracle15/oradata/pindb/pinx055.dbf
Block Checking: DBA = 771822208, Block Type =
Found block already marked corrupted
Block Checking: DBA = 771822209, Block Type =
Found block already marked corrupted
Block Checking: DBA = 771822210, Block Type =
.DBVERIFY - Verification complete
Total Pages Examined : 1048576
Total Pages Processed (Data) : 0
Total Pages Failing (Data) : 0
Total Pages Processed (Index): 157125
Total Pages Failing (Index): 0
Total Pages Processed (Other): 4203
Total Pages Empty : 887248
Total Pages Marked Corrupt : 0
Total Pages Influx : 0
My doubts are :
1.if i drop the index and recreate the index with logging option will this error won't repeat in alert log file
2.in future if i activate the standby database will database is going to open without any error.
Thanks
Prakash
.

Utility to block writing ._[files] to SMB shares over Ethernet?

Similar Messages

Maybe you are looking for