UWL custom view

I'm not an espert by any means in this area but I am trying to add a custom view to the UWL with approve and reject buttons so the user does not have to open each workitem to process them. I have managed to get the subview to appear on the UWL but no workitems are in the list despite there being some in the main view. I have put the XML code below, anyone have any ideas what is wrong with it?
Thanks
Rob
Code:
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE UWLConfiguration (View Source for full doctype...)>
- <UWLConfiguration version="1.0">
- <ItemTypes>
- <ItemType name="uwl.task.webflow.decision.TS92000003.Finance_and_HR" connector="WebFlowConnector" defaultView="myApprovalView" defaultAction="viewDetail" executionMode="default">
<ItemTypeCriteria systemId="Finance_and_HR" externalType="TS92000003" connector="WebFlowConnector" />
- <Actions>
- <Action name="Approve" groupAction="yes" handler="UserDecisionHandler" returnToDetailViewAllowed="yes" launchInNewWindow="no" defaultGroupAction="no">
<Descriptions default="Approve" />
</Action>
- <Action name="Reject" groupAction="yes" handler="UserDecisionHandler" returnToDetailViewAllowed="yes" launchInNewWindow="no" defaultGroupAction="no">
<Descriptions default="Reject" />
</Action>
</Actions>
</ItemType>
</ItemTypes>
- <Views>
- <View name="myApprovalView" selectionMode="SINGLESELECT" width="98%" supportedItemTypes="uwl.task.webflow.TS92000003" columnOrder="statusIcon, subject, creatorID, createdDate, dueDate, priority, approveCol, rejectCol" sortby="createdDate:descend, priority:descend" tableDesign="STANDARD" visibleRowCount="10" headerVisible="yes" queryRange="undefined" tableNavigationFooterVisible="yes" tableNavigationType="CUSTOMNAV" actionRef="" refresh="-1" dueDateSevere="0" dueDateWarning="0" emphasizedItems="unread" displayOnlyDefinedAttributes="yes" dynamicCreationAllowed="yes" actionPosition="bottom" tableNavigationHeaderVisible="no">
- <Descriptions default="Application Mass Approval">
- <ShortDescriptions>
<Description Language="en" Description="Application Approval" />
</ShortDescriptions>
</Descriptions>
- <DisplayAttributes>
- <DisplayAttribute name="rejectCol" type="checkbox" width="" sortable="no" format="default" actionRef="2" hAlign="CENTER" vAlign="TOP" maxTextWidth="0" headerVisible="yes">
- <Descriptions default="">
- <ShortDescriptions>
<Description Language="en" Description="Reject" />
</ShortDescriptions>
- <LongDescriptions>
<Description Language="en" Description="Reject the request" />
</LongDescriptions>
</Descriptions>
</DisplayAttribute>
- <DisplayAttribute name="approveCol" type="checkbox" width="" sortable="no" format="default" actionRef="1" hAlign="CENTER" vAlign="TOP" maxTextWidth="0" headerVisible="yes">
- <Descriptions default="">
- <ShortDescriptions>
<Description Language="en" Description="Approve" />
</ShortDescriptions>
- <LongDescriptions>
<Description Language="en" Description="Approve the request" />
</LongDescriptions>
</Descriptions>
</DisplayAttribute>
</DisplayAttributes>
- <Actions>
- <Action name="1" groupAction="yes" handler="UserDecisionHandler" returnToDetailViewAllowed="yes" launchInNewWindow="no" defaultGroupAction="no">
<Descriptions default="1" />
</Action>
- <Action name="2" groupAction="yes" handler="UserDecisionHandler" returnToDetailViewAllowed="yes" launchInNewWindow="no" defaultGroupAction="no">
<Descriptions default="2" />
</Action>
<Action reference="submitUserDecisions" defaultGroupAction="no" returnToDetailViewAllowed="yes" launchInNewWindow="no" />
</Actions>
</View>
</Views>
</UWLConfiguration>

Hi,
Check this blog may be usefull.
Flashy UWL ...
Complete customization of UWL UI.
Thanks and Regards,
gopal

Similar Messages

UWL Custom View Action

Hi all,
I try to implement a custom view action, i.e. an action that is assigned to a view (and not to an item type).
I face the following problem: The UWL system gets my custom action handler by calling IProviderConnector.getActionHandler() and checks if it is a launcher by calling isLauncher(), yet, the performAction() method of the returned ActionHandler is not called.
Thanks for your attention,
--Stefan

Hi all,
I got the problem solved in the meantime. Yet, I am not sure if the solution is correct.
I changed the method IProviderConnectorr.getAllActionsForItem(UWLContext aContext, Map aCurrentActions, Item anItem) to add the new custom action. For that means I instantiate an Action class with the same information I have already specified in the UWL XML configuration for the custom view action.
I do not like this solution because
1. In the program code I have to repeat the specifications already done in XML.
2. The IProviderConnector.getAllActionsForItem() method has an Item as a parameter. What happens if there is no Item available? Does the UWL system call the getAllActionsForItem method anyway?
Maybe someone can give me some insight???
Thanks for your attention,
--Stefan

UWL Configuration - View configuration of NavigationNode

Dear Experts,
I want to configure the UWL to create a custom data table for my own item
types.
This UWL table will be shown in the portal as a delta link that has an
own configuration, not affecting the standard UWL.
To achieve this, I write a custom UWL Configuration (as specified by the dtd), specifing
- a custom View named "myCustomIView"
- a custom navigation tree, containing a Navigation Node named
"mainCustomNavigationMain" on the second level, which contains two
Navigation Nodes referring to "myCustomIView" (rendered as tabs)
In my own UWL table I refer to "mainCustomNavigationMain" as the
navigation id to use my navigation tree and iView definition.
But when I first select the portal role that links to the custom UWL
iView, only the configuration of the navigation nodes affect the UWL
iView, but NOT the configuration of the iView (such as columnOrder,
width, supportedItemTypes and Actions). Instead, the properties of the
UWL's default iView "DefaultView" take place. Even though, in my UWL
configuration this view is NEVER mentioned or indirectly referenced.
Only when I change to the 2nd tab, the iView configuration takes place.
When I then switch back to the first tab, this one's iView is also
configured properly.
Thanks in advance for your answers!
Regards,
Milena May
Steps to reproduce:
1. Create a UWL Configuration as outlined below
2. Upload the UWL Configuration (System Administration -> Universal
Worklist and Worklflow -> Universal Worklist Administration -> Click to
Manage Item Types and View Definitions -> Tab: Upload New Configuration
Configuration Name: uwl.custom
High Priority: true
3. Go back to Universal Worklist Administration
-> Cache Administration Page -> Clear cache of all Systems
4. Create a custom portal role and add the UWL as a delta link
5. Modify the properties of the delta-linked UWL:
useNavigationId = mainCustomNavigationMain
6. Log off and on again.
7. Navigate to the custom role containing the UWL iView
-> see the described behaviour
<ItemTypes>
<ItemType name="uwl.task.myCustomTask" connector="MyCustomConnector"
defaultView="myCustomIView" defaultAction="forwardUsers"
executionMode="default">

<Actions>
<Action reference="forwardUsers" />
<Action reference="delete" />
</Actions>
</ItemType>
</ItemTypes>
<Views>
<View name="myCustomIView" referenceBundle="bundle_custom"
columnOrder="subject, isEscalated, creatorId, createdDate,
priority, attachmentCount, dueDate, status" width="800"
supportedItemTypes="uwl.task.myCustomTask">

<Actions>
<Action reference="delete" />
<Action reference="forwardUsers" />
</Actions>
</View>
</Views>

<NavigationNode name="rootCustomRoot" view="" referenceGroup=""
visible="yes" keepItemCountUpdated="yes" displayItemCountInTitle="yes">

<NavigationNode name="mainCustomNavigationMain" view=""
referenceGroup="" visible="yes" keepItemCountUpdated="yes"
displayItemCountInTitle="yes">

<NavigationNode name="myCustomTab1"
view="myCustomIView" keepItemCountUpdated="yes"
displayItemCountInTitle="yes" visible="yes">
</NavigationNode>
<NavigationNode name="myCustomTab2"
keepItemCountUpdated="yes" displayItemCountInTitle="yes"
visible="yes" view="myCustomIView">
</NavigationNode>
</NavigationNode>
</NavigationNode>

Hi MilenaMMay,
What version is your UWL including patch level?
Beth Maben
EP - Senior Support Consultant II
SAP Active Global Support
Global Support Centre Ireland
**SDN Forum Moderator:
SAP Enterprise Portal: Application Integration
**SDN Universal Worklist Wiki:
http://wiki.sdn.sap.com/wiki/x/ehU

Is there any way to create custom views, like in Thunderbird & Evolution?

Hi Folks,
I have recently switched to Mac. Before this I was using Linux. For mail I used Thunderbird (TB) for many years, and then eventually switched to Evolution Mail (EM) for its smoother integration into Linux.
On both TB and EM I revolved my work flow around custom folder views. As new email came in I would label it (on EM, or tag it on TB). I have numerous inboxes (email accounts) so I would generally be starting out in a smart folder that displays all mail in each inbox. I would most of the time view that smart folder with a Custom View filter in place. The filter would simply display ONLY mail with NO tags/labels.
Once my filter inbox showed NO messages it meant I had labeled everything. I would them use other smart folders to display mail with certain labels AND NO "Completed" label. That way I could go to my "Reply ASAP" folder and see what needed my immediate attention. Each email I replied to I would then add the label COMPLETED and it would vanish from my view.
I explain the above in case someone has specific suggestions on how to achieve a similar workflow on Mail.
In short, what I am wondering is this:
- Is there a built in way to filter a folder on the spot (with a drop down list of predefined and custom Views) --- I have looked and so far did not find this feature
- Is there a way to do this with a script or add-on? I have looked at many and not found a suitable one yet.
I am appealing to the knowledge of those with more experience in Mail. It is new to me.
I am currently using TB on my Mac because it gives me the above feature. BUT it does not have the same degree of integration with the OS and other Mac specific apps that Mail has. Thus I am keen to stick with Mail.
With thanks,
Jonathan

In addition to above:
I have installed a trial of Mailtags. It certainly improves the tagging capability of Mail.
I have also looked at the Smart Mailboxes and Smart Mailbox Folders.
As far as I can tell, however, there is no option to set up a smart mailbox that ONLY shows message with NO LABEL or NO MAILTAG (as the case may be). I can display messages with particular TAGS but not NO tags.
Is there any way to add more options to the Smart Mailbox filter system?
Cheers,
Jonathan

A custom view in the Edit drop-down

Hi,
How could I create a custom view and add it to the Edit List Item drop-down in SharePoint 2013? This screenshot shows what I mean in SharePoint 2010:
I'd like to have a menu item Custom View below Edit Properties in the drop-down list. When the user clicks the item I'd like to redirect to my layout page.
Thanks,
Leszek
Wiki: wbswiki.com

Hi ata6502:
Adding a user custom action for list items
using System;
using Microsoft.SharePoint.Client;
namespace Microsoft.SDK.SharePointServices.Samples
class CreateUserCustomActionList
static void Main()
string urlWebsite = "http://MyServer/sites/MySiteCollection";
ClientContext clientContext = new ClientContext(urlWebsite);
Web oWebsite = clientContext.Web;
List oList = oWebsite.Lists.GetByTitle("My List");
UserCustomActionCollection collUserCustomAction = oList.UserCustomActions;
UserCustomAction oUserCustomAction = collUserCustomAction.Add();
oUserCustomAction.Location = "EditControlBlock";
oUserCustomAction.Sequence = 100;
oUserCustomAction.Title = "My First User Custom Action";
oUserCustomAction.Url = urlWebsite + @"/_layouts/MyPage.aspx";
oUserCustomAction.Update();
clientContext.Load(oList,
list => list.UserCustomActions);
clientContext.ExecuteQuery();
Modifying a user custom action
using System;
using Microsoft.SharePoint.Client;
namespace Microsoft.SDK.SharePointServices.Samples
class ModifyUserCustomAction
static void Main()
string urlWebsite = "http://MyServer/sites/SiteCollection";
ClientContext clientContext = new ClientContext(urlWebsite);
Web oWebsite = clientContext.Web;
List oList = oWebsite.Lists.GetByTitle("My List");
UserCustomActionCollection collUserCustomAction = oList.UserCustomActions;
clientContext.Load(collUserCustomAction,
userCustomActions => userCustomActions.Include(
userCustomAction => userCustomAction.Title));
clientContext.ExecuteQuery();
foreach (UserCustomAction oUserCustomAction in collUserCustomAction)
if (oUserCustomAction.Title == "My First User Custom Action")
oUserCustomAction.ImageUrl = "http://MyServer/_layouts/images/MyIcon.png";
oUserCustomAction.Update();
clientContext.ExecuteQuery();

How to select a custom view in BAPI_MATERIAL_SAVEDATA

In our company we have defined some CUSTOM views for different materials. I want to select a custom view in the header data but don't see an option. The only options I see are as follows:
MATERIAL
IND_SECTOR
MATL_TYPE
BASIC_VIEW
SALES_VIEW
PURCHASE_VIEW
MRP_VIEW
FORECAST_VIEW
WORK_SCHED_VIEW
PRT_VIEW
STORAGE_VIEW
WAREHOUSE_VIEW
QUALITY_VIEW
ACCOUNT_VIEW
COST_VIEW
INP_FLD_CHECK
MATERIAL_EXTERNAL
MATERIAL_GUID
MATERIAL_VERSION
How can I select a view (in BAPI_MATERIAL_SAVEDATA) that's not a standard SAP view?
Please help!
Thanks.

Hi,
which views do you select in the structure HEADDATA? Do you select STORAGE_VIEW?
Cheers

Error while adding a attribute to the the Custom view through a wizard

Hi ,
I have created a new custom view with value node through wizard succesfully.
Now I want to add a new attribute to that node.I am trying to do that by a wizard.
But i am getting the follwing error " Error during analysis of Source Code" although i have
commented or removed my all custom code from that view.
I tried adding the new aattributes in the metthods "IF_BSP_MODEL~INIT " and
"GET_TABLE_LINE_SAMPLE " manually but that also does not worked.
Plz help me with this asap.
Regards,
Sharad

Hi Sharad,
I hope all your classes are active. In case you want to add a new attribute there are two steps.
1.Right click on context node and create attribute, it opens a wizard and continue. This will add the field in the context node and generate the getter-setter methods.
2. In the above two method whcih you mentioned add the new field in the structure of value node. And then create your own getter-setter methods. and activate it. After this you will be able to see the attribute added in the context node.
By using any of the two approaches you will be able to see teh new field in the configuration.
Hope this helps.
Regards,
Ruby.

Unable to populate the Custom Views on UI for the component BP_FACTSHEET

Hi All,
I am working on a requirement on Interaction Center 7.0 .In this i have enhanced the component BP_FACTSHEET and created new Custom views in it. But i am unable to bring those custom views on the UI. As, we know that in this component there is no concept of overview set also.
So, if anyone has faced the same problem please share your inputs.
Thanks in advance,
Thanks and Regards,
Sharad

Hi Sarad,
First you have to enhance the component BP_FACTSHHET .After that configure ur coustom view in fachsheet id BP_ACCOUNT_FS in SPRO.After that go to component BSP_DLC_FS,where you have to configure the ur view in specfic tiles which is display in web ui for specific to business roll.here you can find the ur fachsheet id and custom view.this component is automatically call when you launch fachsheet in web ui for specific business partner under account tab.
Thanks
Vishwas Sahu

How to create a customized view in SCOM monitoring to view alerts

Hi All,
I am trying to create a customized view in SCOM 2012 R2 monitoring for command center team to have the alerts from Server OS, AD, Exchange and few other MPs. I understand that I can use the option "Create by Specific source" and by selecting the
required sources but I don't want all the alerts from these sources to be listed there but only few alerts which the respective teams want it to be.
Thanks in advance.
Regards,
Srini

Hi All,
I am trying to create a customized view in SCOM 2012 R2 monitoring for command center team to have the alerts from Server OS, AD, Exchange and few other MPs. I understand that I can use the option "Create by Specific source" and by selecting the
required sources but I don't want all the alerts from these sources to be listed there but only few alerts which the respective teams want it to be.
Thanks in advance.
Regards,
Srini
Hi Srini,
Based on the above requirement, You want to create a Dashboard view with Specific alerts but not all right ?
Based on my understanding on your above requirement i created one in my SCOM. Please let me know if this is what you really wanted ?
For the below you really need to know what are those alerts, ONLY those alerts you want to be displayed in the dashboard.
Then Go to the Monitoring tab in SCOM and then Right click Active alerts and select New -> Select New Alert view
When you select new alert view you will need to specify the Resolution state and the Specific alerts you want.
In the below example i have selected "MSExchange Active sync Alert" as a example. So my goal is here such that only the alerts i have specified from my selection ( "MSExchange Active sync Alert") if it appears in New state will appear
in this view not all other alerts.
So for that i just used the below options:
Resolution state & Alert name
Resolution state = New
Alert name = %MSExchange XXXXXXXX%
Also as of i see there was no option for entering multiple alert names. But i think there is and i am still trying as it accepts some SQL Wild cards. So if any one has an idea what is the wild card what is to be used to mention multiple names in that Name
view please let me know.
Gautam.75801

How to Create a Configuration Manager Console Custom View

I am trying to create an assembly per the SDK example here:
https://msdn.microsoft.com/en-us/library/hh948614.aspx
I have added the assemblies per this article:
https://social.technet.microsoft.com/Forums/en-US/5d74d30d-295b-4c51-8518-abdabbad731b/console-extension-custom-view-development?forum=configmanagersdk
Now most of my references resolve but at compile time I get:
Error 1 'MyCustomView.MyViewDescription' does not implement interface member 'Microsoft.ConfigurationManagement.AdminConsole.IConsoleView.TypeOfView'. 'MyCustomView.MyViewDescription.TypeOfView' cannot implement an interface member because it is
not public. \MyCustomView\Class2.cs 21 18 MyCustomView
Error 2 'MyCustomView.MyViewDescription' does not implement interface member 'Microsoft.ConfigurationManagement.AdminConsole.IConsoleView2.TypeOfViewController'. 'MyCustomView.MyViewDescription.TypeOfViewController' cannot implement an interface
member because it is not public. \MyCustomView\Class2.cs 21 18 MyCustomView
Error 3 'MyCustomView.MyViewDescription.TypeOfViewController': no suitable method found to override MyCustomView\Class2.cs 23 33 MyCustomView
Error 4 'MyCustomView.MyViewDescription.TypeOfView': no suitable method found to override MyCustomView\Class2.cs 24 33 MyCustomView
Error 5 'MyCustomView.MyViewDescription.TryConfigure(ref System.Xml.XmlElement)': no suitable method found to override MyCustomView\Class2.cs 24 109 MyCustomView
I have been hunting around with a couple of decompilers looking for missing references etc for a few hrs and just can't seem to see what I am missing...
I have included the code block here - typically of course I would not include multiple classes in the same CS file but for this POC it should be fine...
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using Microsoft.ConfigurationManagement.AdminConsole;
using Microsoft.ConfigurationManagement.AdminConsole.Views.Common;
using Microsoft.ConfigurationManagement.AdminConsole.Schema;
using System.Reflection;
using System.Xml;
using Microsoft.EnterpriseManagement.UI.WpfViews;
using Microsoft.ConfigurationManagement.AdminConsole.ConsoleView;
namespace MyCustomView
public class MyViewController : OverviewControllerBase { public MyViewController() : base() { } public override void EndInit() { base.EndInit(); this.Content = new Label() { Content = "My Content" }; } }
public class MyViewDescription : IConsoleView2
override protected Type TypeOfViewController { get { return typeof(MyViewController); } }
override protected Type TypeOfView { get { return typeof(Overview); } } public override bool TryConfigure(ref XmlElement persistedConfigurationData) { return false; }
new public bool TryInitialize(ScopeNode scopeNode, AssemblyDescription resourceAssembly, ViewAssemblyDescription viewAssemblyDescription) { return true; }

Hi Alfonso,
I did eventually release the console extension (see screen shot at the bottom of the page
here).
It has been a while since I worked on this code but as I remember, once I got the references straightened out (see this thread), a lot of the confusion I had was just understanding that some of the programming that had to be done was in WPF (not WinForm).
The sample code from Microsoft does work though.
I never was able to figure out how to tie the "tree node menu item" functionality into the Ribbon (at the top of the SCCM console) so that is still on my TODO list.
So, my advice to you is to start with the Microsoft example code (which I did) from the SCCM SDK and if you get compile time errors, look first for the SCCM assembly references (Microsoft.[ConfigurationManagement, ConfigurationManagement.ManagementProvider,
EnterpriseManagement.UI.Foundation, EnterpriseManagement.UI.WpfViews) and then at the WPF assembly references (PresentationCore, PresentationFramework) for missing class references.
I hope this information can help you. Good luck sir!
Anthony LaMark

How to redirect to a custom view in 10g

Hi All,
Getting a bit of a headache on this one. I am migrating from 5.7 to 10g and in the project some emails are generated with a link to a custom view. Also I have a submit button in a jsp that redirects to a view. This was easy then (/servlet/controller?viewName=myview&from=1 or similar) but a bit more involved now I guess.
I had a look at WAPI and can see how to run an activity in an instance, or indeed an application but cant figure out how to display my view.
Any ideas ?
cheers
Tony

Any thoughts would help on this one.
Effectively I want a url, or wapi call that takes the user directly to the workspace, with work items at a particular view (not inbox). Defaulting everyone to that view isnt a goer and neither is launching an activity.
I guess it is possible as the workspace does it when clicking the view dropdown.
cheers
Tony

Adding Flex-field to Custom View in the Worklist

Hi,
I am using OAS10133. I have mapped a SIMPLE_TYPE payload attribute to a flex field label in the worklist. I created a custom view. I want to display this playload attribute as a column in custom view and want to make it searcheable. But when I create the custom view, then at the time of selecting the columns, I do not find the name of this label listed in the dropdown.
I have also made an entry in WorkFlowLabels.properties file.
Can anyone please let me know if I need to follow any other step to display the flex field label as a column in custom view?
Thanks in advance.
-sam

Hi Pete,
There are two exits that were used.
A user exit IMRC0001 (MeasPoint/MeasDoc: Exit before update (after COMMIT WORK) / FM: EXIT_SAPLIMR0_001) for the transaction IK11 to enter the value for the custom field. When the measuring document is saved a pop up appears wherein the value for the custom field can be entered.
A menu exit IMRC0003 (MeasDoc: Menu exit for customer-specific function / FM: EXIT_SAPLIMR0_003) for the transaction IK12 in order to change the custom field.

Create a Custom View in Project Server 2010 that is Visible in MS Project

Hello All,
We want our PMs to consistently report Physical % Complete, but couldn't find an existing "Status" or "EVM" view. So, in Project Server 2010, using Server Settings > Look and Feel > Manage Views, I created a customized project
view using existing fields (no customized fields, if that matters). The problem is that I cannot find the view when I open MS Project. Under Manage Views, in the Format View section, I have selected "Gantt Chart (Views)" for the Gantt
Chart format field. The view defaulted to "Timesheet" for the Grouping format field. Under the Security Categories section, I have selected My Projects and My Tasks. I have not applied a Filter. Any ideas why I cannot find
this new custom view in MS Project?
Was I supposed to create the new customized view directly in MS Project? If so, where would I find the steps to do that? Thank you!
Julie

Julie --
Nice try, my friend. Your only mistake was trying to create the Microsoft Project view in PWA. You have to open the Enterprise Global for editing in Microsoft Project, and then create the custom view and table in the Enterprise Global. To
open the Enterprise Global for editing, click File > Info > Manage Enterprise Global. When you finish creating the custom view and table, then save, close, and check in the Enterprise Global file, and then exit Microsoft Project completely.
The next time you or any of your PMs launch Microsoft Project and connect to Project Server, the custom view and table will be visible for every current and future project. Hope this helps.
Dale A. Howard [MVP]

Creating a custom view in WEB UI

Hi Experts,
There is a requirement to create a custom view having few fields of oppurtunity.
Please let me know which is better way of achieving;
1. Copying the standard SAP oppurtunity view of component BP_BPBT.
2. Creating a new custom view with user-defined fields.
This view should be displayed in assignment block of accounts.
Though the SAP standard oppurtunity view is available in BP_HEAD, it is not allowing to display the standard view again in our assignment block.
Could you please let me know the steps to follow for achieving this task. (any of 2 ways)
Regards,
Santosh

Hi Santosh,
You have to place the following code in WD_USAGE_INITIALIZE:
WHEN 'ZBP_BPBT'.
          CALL METHOD iv_usage->bind_context_node
            EXPORTING
              iv_controller_type = cl_bsp_wd_controller=>co_type_component
              iv_name             = iv_usage->usage_name
              iv_target_node_name = 'PARTNER'    " Node of the MAIN component
              iv_node_2_bind      = 'PARTNER'.   " Node of the embedded component
            CALL METHOD iv_usage->bind_context_node
              EXPORTING
                iv_controller_type = cl_bsp_wd_controller=>co_type_component
                iv_target_node_name = 'BUTTONSAVE'    " Node of the MAIN component
                iv_node_2_bind      = 'BUTTONSAVE'.   " Node of the embedded component
And if you want to access the component controller from a view, you can access it by 'me->COMP_CONTROLLER'.
If you are in component controller class, it is just 'me'
Regards
Leon

Table Maintenance(SM30) not working for a custom View..

Hi,
I have the below case which is not working at the moment.
we have standard table T024 and the requirement is to update the table directly in production. To update the standard table i have created a custom maintenance view on this table and created a table maintenance generator for custom view.
In maintenace status tab of view i have maintened below information:
Access                                                 read, change, delete and insert
Delivery class                                       A
Data Browser/Table View Maint.         Display/ Maintenance allowed
The table maintenace generator has been also created but when trying to modify it is giving below message
"Client 210 has status 'not modifiable"
We have two clients in dev server 200 -for development
                                                        210 - for development testing
In development it is working but in development testing client and in quality it is not working.
Can you please help me as to why we are getting the above message?
Best Regards,
Rajesh

Hi Rajesh,
That is coming because of the Table Maintainance Generator Settings. You have to chose no, or user, recording routine then system will not generate any request and you can update the data. This is actually a BASIS settings in SCC4, so that for customizing tables system should not generate any request.
Thanks & Regards,
Faheem.

UWL custom view

Similar Messages

Maybe you are looking for