UWL Preview not visible

Hi All,
I am on Portal 701,
i have created a system object for SRM ABAP system in Portal.
Have created UWL Connector for SRM ABAP system with the same name in System Admin-->Universal worklist
Have registered the System successfully.
Have defined a RFC Connector in visual admin as well.
User are able to see workitems in their inbox.
However they are unable to see UWL preview , i mean they don't get to see Task details in the preview.
Any suggestions on how to get UWL preview?
Regards,
Ashish Shah

hi Ashish,
As my understanding , you missed some of the configuration steps in uwl -Admin.
you should maintain the Task ID in uwl.task.webflow.SAP_ERP_HumanResources.xml file
like the below tag<>
<ItemType name="uwl.task.webflow.TS00008267.SAP_ERP_HumanResources" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchSAPAction" executionMode="default">.
After giving the task id's in uwl-admin. you have to clear the cache in uwl then it will be reflect.
Hope this will be helpfull for you.
Thanks&Regards,
cbr.

Similar Messages

  • Items visible in PDF Preview not visible in Design View

    Hello-
    I used the auto create function to turn an existing PDF info a fill-in able PDF. Auto create "auto detects" form fields, including in some areas of the form that are not fields at all (blank areas, etc.). I go into Design View and remove any extra fields. However, I've discovered there are some fill-inable fields visible in PDF Preview and in the actual PDF itself (once saved) that are not visible at all in Design View- thus I can't click on them and delete them- they just aren't visible in that view. I've read the forums and it seems the opposite problem is more common, in which something shows in Design View but does not show in PDF Preview or in the final PDF.
    Any guidance on what's going on? Next steps? I'm not a coder, so the simpler the better. Thanks to anyone with suggestions.

    All the fields on your form are listed in the Hierarchy which is generally on the left-hand side of your screen. In there you should be able to go through each field and delete the ones you don't need.

  • UWL workitems not visible

    Hi Champs,
    In our landscape there are many ECC systems (HR, SRM, ERec) and UWL is configured on a consumer portal which connects to these ECC systems and extracts the workitems. Now workitems from HR and ERec system are visible but no SRM workitems are visible in portal. It was working fine earlier.
    We have done the following checks:
    1. UWL configuration.
    2. Re-registered the system.
    3. Checked the RFC destinations and the connection is successful.
    4. Workitems are present in SRM system.
    5. Connection status doesnt not show any error.
    It was working fine until we changed the timeout parameter and restrated the SRM system.
    ps: the user has more than 700 workitems in his inbox, would that cause any problem?
    Regards,
    Piyush.

    Hi Piyush,
    Check this thread out,
    /message/7415415#7415415 [original link is broken]
    Regards,

  • HAP_PDF_OFFLINE_FORM - pdf preview not visible

    Hi ,
    I opened the standard HAP_PDF_OFFLINE_FORM  but when i am seeing this form i am not able to see the PDF preview
    of this form .
    Could you please let me know what could be the reason .
    ADS is installed in my system . I can see the body in the layout but not the master and PDF preview .
    Please provide your input on this issue .
    Thanks ,
    Omm

    Hello ,
       The reason for this is that the fields of this form get populated on runtime .
    You are not able to see the PDF preview as many field properties presence has been set to hidden .
    You can also check XML source of the same.
    Thanks,
    sahiba

  • "Display Form" button not visible in UWL preview

    Hi Friends,
    We are implementing Travel module. The standard Workflow WS20000050 has a single level of approval. However, we wanted 2 level approval and so accordingly this was implemened.
    Now we want a 3rd level of decision step to be approved by the traveldesk on recept of tickets.
    Even the pdf form, which contains the travel details, needs to be visible. In the standard task TS20000118, the "Display Form" button is automatically visible in the UWL preview apart from the usual 
    "Approve" and "Reject" buttons.
    However the content that needs to be shown to the traveldesk is different. To achieve this, i copied the standard task TS20000118 and changed only the task description. Rest everything including the parameters and binding remains same.
    But for this task, the "Display Form" button is not visible.
    1. Please advice on the possible reasons why this is happening ?
    2. Is there any setting or any SPRO configuration wherin we need to 
        specify the tasks for whom the button needs to be displayed ?? or
        Is it some portal side configuration ?
    Thanks,
    Shashank

    Hi Vijay,
    Goto:
    Universal Worklist Content Configuration -> Click to Administrate Item Types and View Definitions
    In the table under the "Current Configurations" tab, select the standard travel configuration provided by SAP -> "com.sap.pct.erp.mss.tra".
    Here, search for the code of the task for which everything is working fine; in our case it was TS20000118. Copy this piece of code.
    Now download the currently active XML configuration. In the saved XML file, search for the task code which is not working as expected. Replace this piece of code with the code copied in the above step. Save with a different name.
    Upload this new configuration with HIgh priority.
    Reregister the connector and clear the cache.
    These steps solved my problem. Probably it should work for you too.
    Regards,
    Shashank

  • BPM TASK IS not visible in UWL  Inbox

    Hi  BPM Expert,
      I am facing the big issues in BPM process Triggered problem. earlier i used  to BPM start using Web service with Two entity as ID and Username  but its was  working fine .but i have some requirement to  adding one element in Existing WSDL entity as casename  , i have added that element and execute the web service using WEBDYNPRO application ,but Task is not visible in UWL inbox but earlier it was working perfectly,  after adding that field ,BPm tax is not visible UWL inbox ..
    Please guide me ,Its urgent...Plz plz..
    Its showing error as
      Technical issues is triggered during the process creation..
    Thanks
    sudhir

    Hi ,
      I am executing the WEbservice using WSNAVIGATOR but its not execute , its getting HTML log error as  below..
    1-Web service returned error. Fault Code: "(http://schemas.xmlsoap.org/soap/envelope/)Server" Fault String: "Could not retrieve SDO HelperContext for service_id nsn.com/claimbpmproject/PRINVOKE"
    2-
    HTTP/1.1 500 Internal Server Error
    server: SAP NetWeaver Application Server 7.20 / AS Java 7.20
    content-type: text/xml; charset=utf-8
    date: Sat, 26 Nov 2011 11:40:56 GMT
    transfer-encoding: chunked
    Set-Cookie: <value is hidden>
    2e4
    <?xml version="1.0" encoding="UTF-8"?><SOAP-ENV:Envelope xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><SOAP-ENV:Body><SOAP-ENV:Fault><faultcode>SOAP-ENV:Server</faultcode><faultstring>Could not retrieve SDO HelperContext for service_id nsn.com/claimbpmproject/PRINVOKE</faultstring><detail><yq1:com.sap.engine.interfaces.webservices.runtime.RuntimeProcessException xmlns:yq1='http://sap-j2ee-engine/error'>Could not retrieve SDO HelperContext for service_id nsn.com/claimbpmproject/PRINVOKE</yq1:com.sap.engine.interfaces.webservices.runtime.RuntimeProcessException></detail></SOAP-ENV:Fault></SOAP-ENV:Body></SOAP-ENV:Envelope>
    0
    Thnaks
    Sudhir

  • I just started using a new version of Illustrator and the text I am creating has a pink box behind, looks to be about the depth of the normal linespace, it is not visible in outline view, only in preview. What is it and how do I get rid of it?

    I just started using a new version of Illustrator and the text I am creating has a pink box behind, looks to be about the depth of the normal linespace, it is not visible in outline view, only in preview. What is it and how do I get rid of it?

    Hi Larry. I see. It is a file I have worked on previously, and the font is Myriad which I though came with the system. I just changed to Myriad Pro and the pink box disappeared. Thanks for the assistance, I know a new thing!

  • Work items are not visible  UWL task are visible in tracking in portal

    HI
    Friends
    i  am new from sap Ess/Mss implementation project...
    i am facing an Problem " Work items are not visible under UWL in portal overview page"
    but i am configured  all the ess/mss related things....and also Created for one user for Requester(send Leave Request)...and one more user for App-rover(Apporve an Leave)..
    Requestor send an Leave through portal send it successfully......but i am facing  a problem in uwl under work items are not showing in overview page...but in tracking work items are (Leave request)showing.....work items are not showing in uwl TASK(VERY PROBLEM)...
    i am configured and also registered UWL IN PORTAL..it is good..
    in sap ecc i can assigned UWL_SERVICE user to roles
    1.SAP_BC_BMT_WFM_UWL_ADMIN    
    2.SAP_BC_BMT_WFM_UWL_END_USER
    3.SAP_BC_ADMIN_USER
    4.SAP_BC_UWL_SERVICE
    PLEASE HELP ME.
    Tanks
    Shaik Rafi

    Hi All,
    In such cases, please try to check as below :
    1) Create Leave request work item from Employee and check the same under the UWL Tracking tab of employee.
    2) Log-in to swi5 transaction of the respective back end system and give "US" -> manager's UserID -> Choose Tasks to be completed from the drop down -> Remove any date if mentioned -> Execute.
    3) Here if you can see the Leave request created, but not on the portal, it reflects some portal issue like sync.
    4) If no leave request work item is seen here, then there is a problem in the employee manager mapping or the workflow setup.
    5) In such cases, you can try to check the Swi1 and check the log of that workflow to understand the current status of the Leave request.
    Revert if further help is needed with more info.
    Reward points if found useful.
    Regards,
    Shri vidya S

  • Work items are not visible under UWL in portal ?

    Hi,
    We are upgrading from SRM 5.0 to SRM 7.0.
    We have observed one issue here. Workitems are not visible in UWL in portal.
    But workitems are available in SAP inbox. i.e SBWP.
    Completed items we can see in UWL.
    Could you please let me know any idea on this.
    Regards
    Venkatesh P
    Edited by: Venkatesh Padarti on Dec 9, 2010 8:28 AM
    Edited by: Venkatesh Padarti on Dec 9, 2010 8:29 AM

    Hi Venkatesh,
    Can you please share the solution? Which base URL was wrong and where did you correct that?
    Your help is really appreciated.
    I had post the same question at SRM workflow - work Item is not being displayed If you want to reply there. I will definitely, reward with points too.
    Thanks,
    Bhavik

  • Process Chain alerts not visible in UWL

    I have carried out the weblog test that Ginger published at
    /people/ginger.gatling/blog/2005/06/16/integrating-alerts-into-uwl--its-no-problem
    and everthing worked fine.
    We are, however, trying to use Process Chain alerts from CCMS.  These alerts are visible if we run transaction RZ20 in the back end system but the UWL does not see them.
    Is there a guide or something showing how to configure this?
    Thank you

    Hi Bernard,
    I've checked out a couple of systems - you can create alert categories for process chain alerts, and once you have the category you can of course assign recipients.
    In fact you should see some existing categories in your system for process chains in transaction ALRTCATDEF.
    The UWL essentially reflects what is in the BSP ALRTINBOX as it is using the same/similar routines to derive the alert inbox worklist.   So if you don't have anything in ALRTINBOX then it is correct that nothing is showing in UWL inbox as well. 
    You need to set up the categories and recipients against your process chain alerts.
    I'm not all that familiar with BI Process Chains but a couple of minutes looking at the IMG in transaction SPRO showed that in transaction RSPC when you select a process chain you can use menu option Settings > Maintain Alert Categories to make the link between the process chain and the alert categories.  You'll probably know what to enter here better than I do.
    Regards,
    Jocelyn

  • First tab of Lable Based Menu is not visible in Preview Mode

    HI Genious,
    I have added one Lable Based Menu in my application. If i apply the dynamic visibility to it, in preview mode 1st tab is not visible all other tabs are visible.
    Ex. In Lable Based Menu, I have three label :- Distribution  Center, Zoo, Bird Park. I have applied dynamic visibility to this component. In preview mode, I am not able to visible the first label (i.e. Distribution Center) while all other labes are working properly.
    While i remove the dynamic visibility, All the labes are visible. But my application is not like that so i could not adapt that solution.
    Regards,
    Rishit

    Hi Rishit,
    Please let me know if you have applied Fix pacK3 for Xcelsius.
    I have seen this issue in FP2, which got fixed in FP3. The workaround you can try is including a blank cell.
    Thanks,
    Amit.

  • HTML style not visible in Peoplesoft But able to view in Preview RTF templa

    Hi Team,
    Anyone help me urgent. I am not able to view the HTML style in HyperLink in Peoplesoft Online. But i am able to view in Preview tab. I am wondering.
    i.e. My data's are able to view in online but tables that border are not visible. But it works in preview table. Can anyone guide me on this. Please?
    This is the code snippet which i have used in RTF template: (Cross tab report).
    <?for-each-group@column:row;./RANGESIZE?>
    <?RANGESIZE?>
    <?end for-each-group?>
    <?for-each-group:row;./EP_RATING?><?variable@incontext:G1;current-group()?>
    <?EP_RATING?>
    <?for-each-group@cell:/query/row;./RANGESIZE?>
    <?$G1[(./RANGESIZE=current()/RANGESIZE)]/Y_MINIMUM_PCT?>
    <?$G1[(./RANGESIZE=current()/RANGESIZE)]/Y_MAXIMUM_PCT?>
    <?end for-each-group?>
    <?end for-each-group?>
    Edited by: 1006631 on May 21, 2013 1:44 AM

    I would recommend to look very closely and the way the default role is defined in the client 000 Homepage Framework and use this structure and defintions as a guide for implementing your custom role
    In particular the Bank service must be linked to a resource which must point to the required location in the PCD
    Best wishes
    Stuart

  • UWL Approve Reject button not visible

    Hello Experts,
    We have implemented Portal 7.0 SP 18 and configured UWL. All task items are appearing correctly.
    But approve and reject button is not visible in UWL. The same is visible in ITS screen when we click on the task.
    Kindly help.
    Regards,
    Nirmal Sivakumar G

    Hi Soral,
    All workflows from ECC is causing this problem. To be precise I have configured a webflow connector to pull the tasks from SAP Inbox. The approve/Reject button should appear in UWL ivew when we select the task item. But only forward and resubmit options are visible.
    I guess the problem is with SP 18 itself. Coz there are similar threads with the same scenario in SP 18.
    Regards,
    Nirmal Sivakumar G

  • Field that is not visible in my editing screen but showing in web preview. How to remove it?

    Hi Support,
    When I preview my form in web preview, I am seeing a field that is not visible in my editing screen. It starts at the left margin of the web preview and runs off the edge of the right side of the page.
    The form is also crashing when I attempt 'page view' or 'save as pdf' and I believe this phantom field is the culprit. I have spent considerable time on the form and do not want to recreate from scratch.
    Can you please advise how I can make this field visible in the editing section so that I can permanently delete it?
    Further information:
    I do not have any rules set for any of my fields
    I have tried to remove it in Chrome, IE and Firefox
    My cache has been cleared today
    My plug-ins and flash player are all current versions (updated today and performed a restart)
    Thanks,
    Kate

    Hi Kate,
    Could you please share your form with me ([email protected]) so that I can investigate and correct this problem? Instructions on sharing can be found here:
    http://forums.adobe.com/docs/DOC-2462
    Thanks,
    Brian

  • When preview my ibook on IPAD the text on the edge of the text box is not visible.  How do I fix that?

    When I preview my ibod created in Ibook Author on my IPAD some of the text on the edge of the text box is not visible.  How do I fix that?

    Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

Maybe you are looking for